we would leak a saved screen for every other package we tried to install
that listed perl as one of its dependencies. When installing things
like gnome and kde that wound up being a LOT of leaked memory.
Insta-MFC request coming so this can be tested as part of 6.3-RC2...
Testing help from: kris
paragraph clarifying that portsnap does not behave the same way as
cvs and cvsup where local modifications are concerned.
Submitted by: peter
Feet shot: peter, kris, obrien, + many others
too small for today's standards. While loading packages sysinstall
blows past this by a LOT but I think (hope...) that's caused by other
bugs. I'll look more into why sysinstall's memory use has gotten so
out of control as it loads packages but independent of that there really
is no reason to leave the limits on datasize and stacksize in place. And
they can cause problems for some of the things "modern packages" might
be doing via pkg_add which gets run by sysinstall and would inherit the
limits.
Another insta-MFC probably coming, this is holding up 6.3-RC2. Sysinstall's
memory use is so out of control it blows past the current limit before it
finishes loading either of the meta-packages kde or gnome...
manual's Appendix D ("Old Features Supported but not Encouraged") in
the Seventh Edition Unix Programmer's Manual (January, 1979) by
retiring the " = {" method of of action specification in favor of a
plain "{". It is no longer necessary for this bootstrap program to
be compatible with 6th Edition systems. Some yaccs in the wild do not
support this old syntax any more, and compatibility with those systems
is more important these days (as there are easily 7 orders of magnitude
more of them than real v6 systems today).
Reviewed by: jhb@ and dds@ (the latter gave the reference).
"build dependencies" field is 5,108 characters which overflows the
length of the junk buffer by a teeny bit. This whole section needs
much more error checking but for now just completely ignore stuff
we have no interest in instead of copying it to someplace we don't
use in the process.
Insta-MFC probably coming since this is holding up 7.0-RC1...
1. Start mergemaster
2. Interrupt it
3. < Somehow the temproot directory disappears >
4. mergemaster -r
Many bad things can happen, especially if the -i option is in use.
Therefore, add a check to make sure it still exists before we start
comparing files.
Brought to my attention by:
PR: bin/40538
Submitted by: Cyrille Lefevre <cyrille.lefevre@laposte.net>
xorg-server doesn't include any video drivers so install xorg-drivers as
well. And if font-alias isn't installed the X server won't start,
complaining it can't find the font "fixed".
Insta-MFC coming, this was tested with a RELENG_6_3 release build and
the necessary packages as part of the first round of testing for 6.3-RC2.
for the port to drain).
+ Handle "*" as a priority properly.
+ Test what is free'ed.
+ Dynamically determine length vs. hardcoding it.
+ Free the previous message buffer (f_prevline) only after logging all the
messages and just before the process exit. Also check f_prevline for NULL
before using it.
+ The time displayed is not synchornized with the other log destinations.
+ Fix a comment.
Obtained from: Juniper Networks
approval. These changes were approved by adding it as port to
ports/ tree, but not for src/. I talked to PR submitter and miwi@
some days ago and explained the reasons for it, the both were agree
to add it to ports/ only.
order. This allows direct comparison of the output of two different
runs, regardless of the order in which readdir(2) returns directory
entries.
MFC after: 3 weeks
to autoamu_autofs_prot.h. It is easier to just create shell header within
the Bmake framework.
For now it's a stub - fill out when we know our Autofs direction.
- Print a warning if the version number recorded in the log is not what the
tool expects.
- Print a tidier error message when an unrecognized event is encountered
in the log.
- Don't print a spurious 'Unknown error: 0' when exiting after a parse
error.
doesn't use the default CFLAGS which contain -fno-strict-aliasing.
Until the code is cleaned up, just add -fno-strict-aliasing to the
CFLAGS of these for the tinderboxes' sake, allowing the rest of the
tree to have -Werror enabled again.
shared object files which have the same name as currently-installed
shared object files should be reinstalled after binaries are rolled
back. The order for rolling back updates is therefore
1. Install any old shared object files which can be installed without
overwriting a new shared object file.
2. Rollback everything which isn't a shared object or kernel file.
3. Rollback any shared object files which we didn't deal with in (1).
4. Rollback to the old kernel.
Bug reported by: Jan Henrik Sylvester
MFC after: 3 days
upgrading to new releases. Important parts of this code include
* automatically determining which optional components (e.g., src,
info, proflibs) are installed.
* merging changes in files which are modified locally and have
changed between the currently running and new release.
* prompting the user to rebuild all 3rd party software before
deleting old shared libraries.
Yes, this is compatible with "freebsd-update rollback" -- you can
test a new -BETA and roll back to the old release if you don't
like it.
Subject to re@ approval, this will be MFCed before 7.0-BETA3 and
6.3-RC1.
MFC after: 2 days
* When installing updates, make sure that securelevel <= 0. Otherwise
we can't remove the schg flag from files.
* When preparing to download updates, check to see if we already have
them sitting in the /files/ directory. This saves bandwidth if users
run "freebsd-update fetch" more than once without installing updates
in between.
While I'm here, bump the copyright date.
MFC after: 3 days
wpa_supplicant expects that it has exclusive access to the net80211 state so
when its starts poking in the WEP/WPA settings and the card is already
scanning it can cause net80211 to try and associate incorrectly with a
protected AP.
This is an inconvenience for firmware based cards such as iwi where it can be
sent an auth instruction with incomplete security info and cause a firmware
error.
Remove the 'ifconfig up' from network.subr since wpa_supplicant will
immediately down the interface again.
Reported by: Guy Helmer (and others)
Reviewed by: sam, brooks, avatar
MFC after: 3 days
all ports/UPDATING entries that affect one of the installed ports,
and are relevant on the given machine.
PR: bin/117564
Submitted by: Beat Gaetzi <beat@chruetertee.ch>
MFC after: 14 days
nfsd(8), in mountd(8), and in rpc.statd(8)
-h bindip
Specify specific IP addresses to bind to for TCP and UDP requests.
This option may be specified multiple times. If no -h option is
specified, rpc.lockd will bind to INADDR_ANY. Note that when specifying
IP addresses with -h, rpc.lockd will automatically add 127.0.0.1 and
if IPv6 is enabled, ::1 to the list.
PR: bin/98500
MFC after: 1 week
and in mountd(8)
-h bindip
Specify specific IP addresses to bind to for TCP and UDP requests.
This option may be specified multiple times. If no -h option is
specified, rpc.statd will bind to INADDR_ANY. Note that when specifying
IP addresses with -h, rpc.statd will automatically add 127.0.0.1 and if
IPv6 is enabled, ::1 to the list.
(coming for rpc.lockd too)
PR: bin/98500
MFC after: 1 week
caused a segfault. It turns out that in pre-7.0 systems if you do
getenv("amd_enable=YES") it will return the setting of the environment
variable "amd_enable" but now it returns NULL. I think I found the
places where sysinstall was potentially relying on that old behavior.
Fix is to make a copy of the string to be used for the getenv(3) call,
look for a '=' character in it, and replace it with '\0' if one is
found. Stuck to sysinstall's typical coding standards despite urges
to do otherwise.
PR: 117642
MFC after: 2 days
argv[1] to mimic crt0 behaviour. Do the job by a direct assignment
to __progname in order to stay compatible with NetBSD, whose
setprogname() is a deliberate no-op.
The reason for this change is that some programs (usually those
imported from NetBSD) use getprogname() to distinguish between their
aliases. (See pkill aka pgrep for example.)
This change can be useful, and applicable, to NetBSD, too.
pkg_version tried to open instead of just "INDEX" to make the actual
problem more clear (e.g. missing INDEX-8).
MFC after: 3 days
Reviewed by: portmgr (pav)
own line. We made this change in traceroute(8) some time ago. This
is particularly useful when you are not resolving hostnames since ip6
addresses can be quite long, and lines wrap fairly easily in the
multi-path router case.
Discussed with: bz
MFC after: 1 month
-h bindip
Specify specific IP addresses to bind to for TCP and UDP requests.
This option may be specified multiple times. If no -h option is
specified, mountd will bind to INADDR_ANY. Note that when specifying
IP addresses with -h, mountd will automatically add 127.0.0.1 and if
IPv6 is enabled, ::1 to the list.
PR: bin/114097
Reviewed by: pjd (an eariler version of the patch)
MFC after: 1 week
This commit includes the following core components:
* sample configuration file for sensorsd
* rc(8) script and glue code for sensorsd(8)
* sysctl(3) doc fixes for CTL_HW tree
* sysctl(3) documentation for hardware sensors
* sysctl(8) documentation for hardware sensors
* support for the sensor structure for sysctl(8)
* rc.conf(5) documentation for starting sensorsd(8)
* sensor_attach(9) et al documentation
* /sys/kern/kern_sensors.c
o sensor_attach(9) API for drivers to register ksensors
o sensor_task_register(9) API for the update task
o sysctl(3) glue code
o hw.sensors shadow tree for sysctl(8) internal magic
* <sys/sensors.h>
* HW_SENSORS definition for <sys/sysctl.h>
* sensors display for systat(1), including documentation
* sensorsd(8) and all applicable documentation
The userland part of the framework is entirely source-code
compatible with OpenBSD 4.1, 4.2 and -current as of today.
All sensor readings can be viewed with `sysctl hw.sensors`,
monitored in semi-realtime with `systat -sensors` and also
logged with `sensorsd`.
Submitted by: Constantine A. Murenin <cnst@FreeBSD.org>
Sponsored by: Google Summer of Code 2007 (GSoC2007/cnst-sensors)
Mentored by: syrinx
Tested by: many
OKed by: kensmith
Obtained from: OpenBSD (parts)
gets cleaned up upon receiving SIGINT. This un-breaks subsequent
executions of ipfwpcap and helps when debugging network/divert
issues like this:
ipfwpcap -r 6000 - | tcpdump -r -
MFC after: 1 week
