use by ABI emulators.
- Alter the interface of kern_recvit() somewhat. Specifically, go ahead
and hard code UIO_USERSPACE in the uio as that's what all the callers
specify. In place, add a new uioseg to indicate what type of pointer
is in mp->msg_name. Previously it was always a userland address, but
ABI emulators may pass in kernel-side sockaddrs. Also, remove the
namelenp field and instead require the two places that used it to
explicitly copy mp->msg_namelen out to userland.
- Use the patched kern_recvit() to replace svr4_recvit() and the stock
kern_sendit() to replace svr4_sendit().
- Use kern_bind() instead of stackgap use in ti_bind().
- Use kern_getpeername() and kern_getsockname() instead of stackgap in
svr4_stream_ti_ioctl().
- Use kern_connect() instead of stackgap in svr4_do_putmsg().
- Use kern_getpeername() and kern_accept() instead of stackgap in
svr4_do_getmsg().
- Retire the stackgap from SVR4 compat as it is no longer used.
we will initialize the label to biba/low for files that have been created
through an NFS RPC. This is a safe default given the default nature of our
NFS implementation, there is not a whole lot of data integrity there by
default. This also fixes kernel panics associated with file creation over NFS
while creating files on filesystems which have multilabel enabled with BIBA
enabled.
MFC after: 2 weeks
Discussed with: rwatson
loading for the QLogic cards.
Because isp(4) exists before the root is mounted, it's not really
possible for us to use the kernel's linker to load modules directly
from disk- that's really too bad.
However, the this is still a net win in in that the firmware has
been split up on a per chip (and in some cases, functionality)
basis, so the amount of stuff loaded *can* be substantially less
than the 1.5MB of firmware images that ispfw now manages. That is,
each specific f/w set is now also built as a module. For example,
QLogic 2322 f/w is built as isp_2322.ko and Initiator/Target 1080
firmware is built as isp_1080_it.ko.
For compatibility purposes (i.e., to perturb folks the least), we
also still build all of the firmware as one ispfw.ko module.
This allows us to let 'ispfw_LOAD' keep on working in existing
loader.conf files. If you now want to strip this down to just
the firmware for your h/w, you can then change loader.conf to
load the f/w you specifically want.
We also still allow for ispfw to be statically built (e.g., for
PAE and sparc64).
Future changes will look at f/w unloading and also role switching
that then uses the kernel linker to load different ips f/w sets.
MFC after: 2 months
uma(9) will be used for memory allocation.
In case of problems or tracking bugs, there are more useful tools for malloc(9)
debugging than for uma(9) debugging, like memguard(9) and redzone(9).
MFC after: 1 week
parameter that can specify configuration parameters:
o rev cloner api's to add optional parameter block
o add SIOCCREATE2 that accepts parameter data
o rev vlan support to use new api (maintain old code)
Reviewed by: arch@
that the 'data' pointer is already setup to point to a valid KVM buffer
or contains the copied-in data from userland as appropriate (ioctl(2)
still does this). kern_ioctl() takes care of looking up a file pointer,
implementing FIONCLEX and FIOCLEX, and calling fi_ioctl().
- Use kern_ioctl() to implement xenix_rdchk() instead of using the stackgap
and mark xenix_rdchk() MPSAFE.
mostly consists of pushing a few copyin's and copyout's up into
__semctl() as all the other callers were already doing the UIO_SYSSPACE
case. This also changes kern_semctl() to set the return value in a passed
in pointer to a register_t rather than td->td_retval[0] directly so that
callers can only set td->td_retval[0] if all the various copyout's succeed.
As a result of these changes, kern_semctl() no longer does copyin/copyout
(except for GETALL/SETALL) so simplify the locking to acquire the semakptr
mutex before the MAC check and hold it all the way until the end of the
big switch statement. The GETALL/SETALL cases have to temporarily drop it
while they do copyin/malloc and copyout. Also, simplify the SETALL case to
remove handling for a non-existent race condition.
to use the hinted child system. Bus drivers that use this need to
implmenet the bus_hinted_child method, where they actually add the
child to their bus, as they see fit. The bus is repsonsible for
getting the attribtues for the child, adding it in the right order,
etc. ISA hinting will be updated to use this method.
MFC After: 3 days
atkbd. Version 1.162 of GENERIC fixed this problem in April of 1999.
Subsequent to that, the hints data was removed from GENERIC and move
to hints files. All the hints file ever created have atkbd at the
right location. This should have been removed just after RELENG_4 was
branched (and likely around 4.5 in RELENG_4).
MFC After: 3 days
in nfs_strategy. Otherwise, for some buffers, signals would be ignored
at the intr mounts.
Reviewed by: mohan
MFC after: 1 month
Approved by: kan (mentor)
any modifications to make it build as part of the FreeBSD kernel.
Now that the source appears to have stabilized, local changes will
happen on HEAD and will therefore cause affected files to be pulled
from the vendor branch.
subr_acl_posix1e.c, leaving kern_acl.c containing only ACL system
calls and utility routines common across ACL types.
Add subr_acl_posix1e.c to the build.
Obtained from: TrustedBSD Project
not all known to be MPSAFE yet.
- Actually remove Giant from the kernel linker by taking it out of the
KLD_LOCK() and KLD_UNLOCK() macros.
Pointy hat to: jhb (2)
shmctl(). None of the other ABI's do this (including the native FreeBSD
ABI), and uselessly trying to do a copyin() can actually result in a
bogus EFAULT if the a process specifies NULL for the optional argument
(which is what they should do in this case).
ibcs2_[gs]etgroups() rather than using the stackgap. This also makes
ibcs2_[gs]etgroups() MPSAFE. Also, it cleans up one bit of weirdness in
the old setgroups() where it allocated an entire credential just so it had
a place to copy the group list into. Now setgroups just allocates a
NGROUPS_MAX array on the stack that it copies into and then passes to
kern_setgroups().
ABI as FreeBSD's poll(2) is ABI compatible. The ibcs2_poll() function
attempted to implement poll(2) using a wrapper around select(2). Besides
being somewhat ugly, it also had at least one bug in that instead of
allocating complete fdset's on the stack via the stackgap it just allocated
pointers to fdsets.
Use it to reset controller and to select data rate. According to Intel
80277AA datasheet, software reset behaves the same as DOR reset except
that it is self clearing. National Semiconductor PC8477B datasheet says
the same. As a side effect, we no longer use Configuration Control
Register (CCR) at 0x3f7 for these controllers, which is often missing
in modern hardware.
already locked. The reason to do this is to avoid two lock+unlock operations
in a row. We need the lock here to serialize access to bd_pid for stats
collection purposes.
Drop the locks all together on detach, as they will be picked up by
knlist_remove.
This should fix a failed locking assertion when kqueue is being used with bpf
descriptors.
Discussed with: jmg
- Correct audit_arg_socketaddr() argument name from so to sa.
- Assert arguments are non-NULL to many argument capture functions
rather than testing them. This may trip some bugs.
- Assert the process lock is held when auditing process
information.
- Test currecord in several more places.
- Test validity of more arguments with kasserts, such as flag
values when auditing vnode information.
Perforce change: 98825
Obtained from: TrustedBSD Project
(and by extension, the 2422).
One peculiar thing I've found with the 2322 is that if you
don't force it to do Hard LoopID acquisition, the firmware
crashes. This took a while to figure out.
While we're at it, fix various bugs having to do with NVRAM
reading and option setting with respect to pieces of NVRAM.
Make serial ports more robust and reliable. Make non-console ports
work. This might have broken skyeye stuff.
o Introduce ping-pong receive buffers.
o Use DMA to copy characters directly into memory.
o Support baud rates other than 115200
o Use 1 stop bit when 1 stop bit is requested (otherwise 2 were used,
which caused dropped characters when received in bursts).
o Use 1.5 stop bits for 5-bit bytes, and 2 stop bits otherwise when 2
stop bits were requested.
o Actually update line parameters.
o Fix comments
o Move init into attach
o Tweaks to TX interrupt registers to get them reliable and non-storming.
o harvest data in ipend since the latency between it and the callback
was too long. This likely is how it should be, I don't know why I deferred
things to the callback before.
o disable all interrupts in console init. We don't want interrupts until
we turn on an ISR.
o cosmetic tweaks
o Automatically detect of the TIMEOUT interrupt is supported. If so, use
it so we get better CPU utilization. Otherwise do a character at a time
RX. Good news here is that it seems we have enough CPU and low enough
fast interrupt latency to do this reliably.
o Don't read USART_CR. It is a write-only register.
o start to implement bus_ioctl. Do BAUD now...
is never taken since there aren't any 802.11a ural(4) sticks available
on the market.
PR: kern/99676
Submitted by: KIYOHARA Takashi
Reviewed by: damien
MFC after: 1 week
