shutdown_post_sync event. For adashutdown, this causes problems
because we need to poll for completion of the commands, but we're not
yet officially dumping yet, so the code from r326964 assumed we could
use the interrupt-driven commands rather than the polled ones. This
lead to a hang. Prevent this by also checking to see if the scheduler
is stopped to do the polling.
Reported by: markj@
Sponsored by: Netflix
Differential Review: https://reviews.freebsd.org/D13845
inline ccbque.h into scsi_low.h. The file isn't MD, so shouldn't live
in i386/isa. It's only used by scsi_low, so move it there so no new
clients accidentally grow. scsi_low may not even still work, and the
locking here is still SPL based. CAM should do the right thing, but
I've received no reports of these cards still working. At least it
compiles still and there's one fewer files in sys/i386/isa. While I'm
here, ansify and de-splize. CCB_MWANTED appears to be a clear-only
flag, but I've not changed that.
Differential Review: https://reviews.freebsd.org/D13672
from the ada and da dump routines. This avoids difficult locking
problems from needing to be handled. While it might seem like this
would leave the periphs unprotected during dump, they were aleady
at risk of unexpected removal due to the dump functions not
keeping refcount state across the many calls that come in during
a dump. This is an exercise for future work.
Obtained from: Netflix
This reduces noise when kernel is compiled by newer GCC versions,
such as one used by external toolchain ports.
Reviewed by: kib, andrew(sys/arm and sys/arm64), emaste(partial), erj(partial)
Reviewed by: jhb (sys/dev/pci/* sys/kern/vfs_aio.c and sys/kern/kern_synch.c)
Differential Revision: https://reviews.freebsd.org/D10385
changed worked to capture dumps for me. However, the test for
SCHEDULER_STOPPED() isn't right. We can also call the dump routine
from ddb, in which case the scheduler is still running. This leads to
an assertion panic that we're sleeping when we shouldn't. Instead, use
the proper test for dumping or not. This brings us in line with other
places that do special things while we're doing polled I/O like this.
Noticed by: pho@
Differential Revision: https://reviews.freebsd.org/D13531
This provides a nice wrarpper around the XPT_PATH_INQ ccb creation and
calling.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D13387
kernel scheduler is stopped, replace the by hand calling of
xpt_polled_action() with it.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D13388
adagetparams contains a sign-extension error that will cause the sector
count to be incorrectly calculated for ATA disks of >=1TiB that still use
CHS addressing. Disks using LBA48 addressing are unaffected.
Reported by: Coverity
CID: 1007296
Reviewed by: ken
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D13198
currently harmless for AC_UNIT_ATTENTION event (cam_periph_async does
nothing with them), it's still in error because if it were to start in
the future, it would be done twice.
Sponsored by: Netflix
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Like its predecessor ST8000AS0002, this is a drive-managed SMR drive, but
doesn't declare that in its ATA identify data.
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
sys/cam/scsi/scsi_da.c
Complete BIO_FLUSH commands immediately if the da(4) device hasn't
been written to since the last flush. If we haven't written to the
device, there is no reason to send a flush.
Submitted by: gibbs
Reviewed by: imp
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D13106
* Wrongly matches strings that are shorter than the pattern
* Fails to match negative character sets
* Fails to match character sets that aren't at the end of the pattern
* Fails to match character ranges
Reviewed by: imp
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D13173
In scsi_dev_advinfo(), if the physical path is being stored and there is a
malloc failure (malloc(9) is called with M_NOWAIT), we could wind up in a
situation where the device's physpath_len is set to the length the user
provided, but the physpath itself is NULL.
If another context then comes in to fetch the physical path value, we would
wind up trying to memcpy a NULL pointer into the caller's buffer.
So, set the physpath_len to 0 when we free the physpath on entry into the
store case for the physical path. Reset the length to a non-zero value only
after we've successfully malloced a buffer to hold it.
Submitted by: ken
Reviewed by: asomers
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
In xpt_bus_register(), remove superfluous call to free(). This was mostly
benign since free(9) checks for NULL before doing anything, and
xpt_create_path() is nice enough to NULL out the pointer on failure.
However, it could've segfaulted if malloc(9) failed during
xpt_create_path().
Submitted by: gibbs
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
information for that and XPT_PATH_INQ. Provide macros to encode/decode
major/minor versions. Read the link speed and lane count to compute
the base_transfer_speed for XPT_PATH_INQ.
Sponsored by: Netflix
We must send either an IDLE IMMEDIATE or a STANDBY IMMEDIATE to drives
on warm boot so their SMART and other volatile data is
persisted. However, for a warm boot we don't want to send STANDBY
IMMEDIATE to some spinning drives because they will spin down. If
there's a lot of these drives on the system, that can cause a
thundering herd problem at startup time (that in extreme cases causes
timeout in device discovery).
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D12811
To save SMART data and for a drive to understand that it's been nicely
shutdown, we need to send a STANDBY IMMEDIATE. Modify adaspindown to
use a local CCB on the stack. When we're panicing, used
xpt_polled_action rather than cam_periph_runccb so that we can SEND
IMMEDIATE after we've shutdown the scheduler.
Sponsored by: Netflix
Reviewed by: scottl@, gallatin@
Differential Revision: https://reviews.freebsd.org/D12799
When limiting I/O, a value of 0 makes no sense as a limit. No progress
can be made. Trade the possibility that someone might be doing
something clever to achieve ultra-low I/O limits vs the damage of not
ever making progress on an I/O in favor of making progress. Now the
machine won't be useless if this accidentally gets requested.
Sponsored by: Netflix
allocations (for req and ccb, which ultimately contain the
nvme_cmd). As such, we can micro-optimize these routines. Add a
comment to this effect, and bzero the ccb used to make the requests
for the nda dump rotuine so it more closely matches a ccb allocated
with xpt_get_ccb().
Sponsored by: Netflix
Prevent cam_iosched_iops_tick() from discarding 'unspent' ios unless
it's a new accounting interval.
Previously ios that weren't used between ticks were lost, as a result
the iops limiter could enforce a limit below the configured maximum.
Obtained from: ElectroBSD
Submitted by: Fabian Keil
PR: 221974
Previously the iops limiter would always allow at least
quanta ios per second as cam_iosched_iops_tick() never set
ios->l_value1 below 1.
Submitted by: Fabian Keil <fk@fabiankeil.de>
Obtained from: ElectroBSD
PR: 221974
Previously ios->current was set to 0 until the first
cam_iosched_cl_maybe_steer() call.
PR: 221954
Obtained from: ElectroBSD
Submitted by: Fabian Keil
Differential Revision: https://reviews.freebsd.org/D12349
