- awk sometimes formatted swapbase as floating point, which gpart
does not accept; force int.
- Fix typo in code for checking vm.max_swap_pages.
- While here, do not set kernel env if "gpart add" fails.
- Add "gpart show" before modification to verbose output.
Reported by: marklmi at yahoo dot com
Tested by: marklmi at yahoo dot com
This new default-enabled rc will generate a /etc/machine-id file if it
does not exist, and pre-fill it with a newly generated UUID of version 4
[2].
The file is generated in /var/db/machine-id and symlinked to
/etc/machine-id to allow for read-only root partitions.
This file is amongst other things used by libraries like GLib.
Bump FreeBSD version 1400076 to be able to easily add support for older
version of FreeBSD via a package.
[1] Linux machine-id(5): https://www.man7.org/linux/man-pages/man5/machine-id.5.html
[2] f176fe8e7f
Approved by: bapt
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D37722
The growfs_fstab script is a helper for the growfs script to add any
new swap partition to /etc/fstab on first boot. If growfs adds a
swap partition, it sets growfs_swap_pdev in the kenv. In this case,
after the root file system is read/write, if there is no swap partition
in the fstab, growfs_fstab adds growfs_swap as a swap partition to the
fstab. Also, it runs dumpon to add the swap partition (as this
happened earlier in the startup sequence).
Discussed with: cperciva
Differential Revision: https://reviews.freebsd.org/D37463
Add the ability to create a swap partition in the course of growing
the root file system on first boot, enabling by default. The default
rules are: add swap if the disk is at least 15 GB (decimal), and the
existing root is less than 40% of the disk. The default size is 10%
of the disk, but is limited by the memory size. The limit is twice
memory size up to 4 GB, 8 GB up to 8 GB memory, and memory size over
8 GB memory. Swap size is clamped at vm.swap_maxpages/2 as well.
The new swap partition is labeled as "growfs_swap".
The default behavior can be overridden by setting growfs_swap_size in
/etc/rc.conf or in the kernel environment, with kenv taking priority.
A value of 0 inhibits the addition of swap, an empty value specifies
the default, and other values indicate a swap size in bytes.
By default, addition of swap is inhibited if a swap partition is found
in the output of the sysctl kern.geom.conftxt before the current root
partition, usually meaning that there is another disk present.
Swap space is not added if one is already present in /etc/fstab.
The root partition is read-only when growfs runs, so /etc/fstab can
not be modified. That step is handled by a new growfs_fstab script,
added in a separate commit. Set the value "growfs_swap_pdev" in kenv
to indicate that this should be done, as well as for internal use.
There is optional verbose output meant for debugging; it can only be
enabled by modifying the script (in two places, for sh and awk).
This should be removed before release, after testing on -current.
Discussed with: cperciva
Reviewed by: imp (previous version)
Differential Revision: https://reviews.freebsd.org/D37462
As PF now also supports dummynet but can not configure it on its own,
the service which configures pipes, queues and schedulers is needed.
Reviewed by: kp
Differential Revision: https://reviews.freebsd.org/D37451
othermta (along with mta_start_script configuration entry in rc.conf)
was a mechanism used to be able to run another mta than sendmail(8) before
"rcng" time 20 years ago.
othermta has not been used since.
If a zpool is created by makefs(8), its version is 5000, i.e., all
feature flags are off. Introduce an rc script to run `zpool upgrade`
over the assigned zpools on the first boot. This is useful to the
ZFS based VM images built from release(7).
Reviewed by: imp, markj, mav
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D37282
The "shutdown" keyword invokes rcorder with the -k flag, for rc scripts
with the keyword at shutdown.
Reported by: bdrewery
Fixes: 27b9777c28
MFC after: 3 days
Differential Revision:
Users with a tmpfs /var/run will lose the directory tree state of
/var/run at reboot. This rc script will optionally (by default)
capture the state of the directory structure in /var/run prior to
shutdown and recreate it at system boot.
Alternatively a user can save the state of the /var/run directories
manually using service var_run save and disable the autosaving of
/var/run state using the var_run_autosave variable, for those
paranoid SSD users.
PR: 259585, 259699
Reported by: freebsd@walstatt-de.de,
Reviewed by: philip, gbe (previous version)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D36386
Certain configurations need to use a different path for pidfile.
Allow rc.conf to overwrite it.
Reviewed by: cy, 0mp
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D36141
The first time a FreeBSD system boots, it obtains a hostuuid and hostid
from the smbios.system.uuid kernel environment variable. If this value
is found to be invalid, a warning is printed and the boot pauses for
two seconds to give the user a chance to read it.
If the FreeBSD kernel is launched directly in a virtual machine rather
than via the FreeBSD boot loader, the smbios.system.uuid environment
variable might not be set; in this case, there's no need to alert the
user and delay the boot process since the lack of a "hardware" uuid is
entirely expected.
Distinguish between the cases of "invalid UUID" and "no UUID", warning
and delaying the boot only in the former case. In both cases we still
generate a random UUID in software.
Reviewed by: delphij
Sponsored by: https://www.patreon.com/cperciva
Differential Revision: https://reviews.freebsd.org/D36185
The mountd script in rc.d sets vfs.nfsd.server_max_nfsvers correctly
when it is run at system startup, relying on the kernel default.
However, if NFSv4 was enabled in /etc/rc.conf later, and the script
was re-run to restart mountd, the sysctl was still set to 3.
Set the sysctl to the right value in all cases.
Reviewed by: rmacklem
MFC after: 1 week
ntpd does not always gracefully handle clock steps during resume.
This is probably most useful in conjunction with
ntpd_sync_on_start=YES which will work around any clock skew while
suspended.
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D35479
bapt@ had discovered a noticeable boot improvement without the sleep.
Without the sleep does not affect warm or cold boot however a
service netif restart may cause dhclient to spend a few extra seconds
to rerequest the DHCP request.
Reported by: bapt
Reviewed by: bapt
MFC after: 2 months
Differential Revision: https://reviews.freebsd.org/D35457
If one boots up multiple copies of a template VM image containing a
zpool, the pool GUIDs will be identical, making it impossible to, e.g.,
share datasets between them.
This diff introduces a simple workaround for the problem: one can use
the script to, upon first boot, assign a new GUID to one or more zpools.
This will be useful when building ZFS-based VM images from release(7).
Reviewed by: mav, allanjude, asomers
Reviewed by: Pau Amma (docs)
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D35336
When no interface is specified results in a syntax error in the rc
script. Only execute poststart when an interface has been specified.
PR: 263358
Submitted by: markj
Reported by: Joshua Kinard <freebsd@kumba.dev>
Fixes: 0da2c91e64
MFC after: 3 days
The zfskeys service script starts before the zfs service script, so that
dataset decryption keys are available when `zfs mount -a` is run. One of
the potential edge cases of this design is that if a key is stored on
ZFS it won't be loaded until `zfs mount -a` is issued.
In order to address that let's try to load the additional keys and mount
related ZFS datasets after the zfs script finishes its standard mounting
procedure.
PR: 262468
Reported by: Graham Perrin <grahamperrin@gmail.com>
Reviewed by: allanjude
Approved by: allanjude (src)
Fixes: 33ff39796f Add zfskeys rc.d script for auto-loading encryption keys
MFC after: 3 days
Sponsored by: Modirum
Sponsored by: Klara Inc.
Differential Revision: https://reviews.freebsd.org/D34601
By rc.conf(5), setting rc_startmsgs="NO" should silence start messages.
Fix a few rc scripts by using startmsg.
PR: 255207
Reported by: Jose Luis Duran <jlduran@gmail.com>
Reviewed by: imp, 0mp
Approved by: imp (src)
Differential Revision: https://reviews.freebsd.org/D34514
startmsg is a new rc.subr(8) function function to be used instead of
echo(1) when for boot messages. It replaces the often forgotten
check_startmsgs && echo ...
with
startmsg ...
No functional change intended.
I adjusted the commit message and did some final clean-ups of the patch
before committing.
PR: 255207
Reported by: Jose Luis Duran <jlduran@gmail.com>
Reviewed by: imp, 0mp
Approved by: imp (src)
Differential Revision: https://reviews.freebsd.org/D34514
/etc/rc.d/dumpon runs before /etc/rc.d/swap. When encrypted swap is in
use the .eli or .bde device will not exist at the time dumpon runs.
Even if this is addressed it does not make sense to dump core to
encrypted swap, as the encryption key will not be available after
reboot rendering the dump useless. Thus, for the case that dumpdev=AUTO
and encrypted swap is in use, strip the extension and use the underlying
device.
Emit a warning if we are using the underlying device and the user has not
configured dump encryption, so that the user knows that the will not be
encrypted.
PR: 238301
Reported by: Ivan Rozhuk
Reviewed by: jilles
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D34474
- Use the standard *_flags variable for additional flags.
- Style: do not create unnecessary variables
- Do not set the defaults in the service script. This is what
/etc/defaults/rc.conf is for.
- Do not set additional flags via commands_args. ggated_flags are
already included in the final invocation. See rc.subr(8) for details.
- Document the meaning of ggated_config in /etc/defaults/rc.conf.
Approved by: eugen (src)
Fixes: c068632981 Add ggated rc script
Differential Revision: https://reviews.freebsd.org/D34439
Arno Tuber reported via email that he needed to restart the gssd daemon
after booting, to get his Kerberized NFS mount to work.
Without this patch, rcorder shows that the gssd starts before NETWORKING
and kdc. The gssd will need NETWORKING to connect to the KDC and, if
the kdc is running on the same system, it does not make sense to start it
before the kdc. This fixed the problem for Arno.
While here, I also added a "# BEFORE: mountcritremote".
It does not affect ordering at this time, but I felt
it should be added, since the gssd needs to be running
when remote NFS mounts are done.
PR: 261939
Reported by: anothatuber@gmail.com
Tested by: anothatuber@gmail.com
Reviewed by: rew
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D34265
PR#254282 reports a problem where nullfs mounts cannot be
exported via mountd for FreeBSD 13.0.
The problem seems to be that, to do the nullfs mounts in
/etc/fstab, they require the "late" mount option, so that the
underlying filesystem is mounted (ZFS for the PR).
Adding "mountlate" to the REQUIRE list in /etc/rc.d/mountd
fixes the problem, but that results in a dependency cycle
because /etc/rc.d/lockd specifies:
REQUIRE: nfsd
BEFORE: DAEMON
--> which forces mountd to preceed DAEMON.
This patch removes "nfsd" from REQUIRE for lockd and statd,
then adds mountlate to REQUIRE for mountd, to fix this
problem. Having lockd REQUIRE nfsd was done in the NetBSD
code when it was pulled into FreeBSD and there does not
seem to be a need for this.
In case this causes problems, a long MFC has been specified.
PR: 254282
Differential Revision: https://reviews.freebsd.org/D33256
MFC after: 3 months
When a use sets umask in login.conf(5) to 027 or 077 a subsequently
fetched /var/db/ntpd.leap-seconds.list will inherit the permissions
allowed by the umask, resulting in a file that may not be readable
ntpd running under the ntp account. This patch adds a umask command
to preempt the umask in login.conf(5) prior to fetching a new copy
of the leap-seconds file.
PR: 261298
Reported by: Martin Waschbusch <martin@waschbuesch.de>
MFC after: 3 days
Like wpa_supplicant, hostapd does not automatically UP the interface
when configured. The fix is similar to 5fcdc19a81.
Reported by: avg
Tested by: avg
MFC after: 1 week
This reverts commit 266f97b5e9, reversing
changes made to a10253cffe.
A mismerge of a merge to catch up to main resulted in files being
committed which should not have been.
Variables must be quoted if they contain non-alphanumeric characters.
Warner noted in the review that the lack of quoting causing problems
here is rather an edge case. I believe that it's worth adding the quotes
here anyway because this is what the specification says and there is no
good reason not to follow it.
Reviewed by: imp
Approved by: imp (src)
MFC after: 7 days
Add in all the variables set in the kenv variable devmatch_blocklist
too. This allows blocking autoloading from the boot loader.
Sponsored by: Netflix
Reviewed by: 0mp
Differential Revision: https://reviews.freebsd.org/D32171
Since vfs.nfsd.srvmaxio can only be set when nfsd.ko
is loaded, but nfsd is not running, setting it in
/etc/sysctl.conf is not feasible when "options NFSD"
was not specified for the kernel.
This patch adds a new rc variable nfs_server_maxio,
which sets vfs.nfsd.srvmaxio at the correct time.
rc.conf.5 will be patched separately.
Reviewed by: 0mp
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D32997
Currently, if the linux service is run twice, mount(8) fails with:
mount: linprocfs: Device busy
mount: linsysfs: Device busy
mount: devfs: Device busy
mount: fdescfs: Device busy
mount: tmpfs: Device busy
It is a bit more user-friendly if before running mount(8) the service
checks if there are any file systems left to be mounted. This patch
implements this behavior.
Also, while here, create mount points directories (as suggested by
otis).
Reviewed by: trasz
Approved by: trasz (src)
Differential Revision: https://reviews.freebsd.org/D32463
The last two drivers that required sppp are cp(4) and ce(4).
These devices are still produced and can be purchased
at Cronyx <http://cronyx.ru/hardware/wan.html>.
Since Roman Kurakin <rik@FreeBSD.org> has quit them, they no
longer support FreeBSD officially. Later they have dropped
support for Linux drivers to. As of mid-2020 they don't even
have a developer to maintain their Windows driver. However,
their support verbally told me that they could provide aid to
a FreeBSD developer with documentaion in case if there appears
a new customer for their devices.
These drivers have a feature to not use sppp(4) and create an
interface, but instead expose the device as netgraph(4) node.
Then, you can attach ng_ppp(4) with help of ports/net/mpd5 on
top of the node and get your synchronous PPP. Alternatively
you can attach ng_frame_relay(4) or ng_cisco(4) for HDLC.
Actually, last time I used cp(4) back in 2004, using netgraph(4)
instead of sppp(4) was already the right way to do.
Thus, remove the sppp(4) related part of the drivers and enable
by default the negraph(4) part. Further maintenance of these
drivers in the tree shouldn't be a big deal.
While doing that, remove some cruft and enable cp(4) compilation
on amd64. The ce(4) for some unknown reason marks its internal
DDK functions with __attribute__ fastcall, which most likely is
safe to remove, but without hardware I'm not going to do that, so
ce(4) remains i386-only.
Reviewed by: emaste, imp, donner
Differential Revision: https://reviews.freebsd.org/D32590
See also: https://reviews.freebsd.org/D23928
The 3com bluetooth PC Card adapter was removed from the tree when PC
Card support was removed earlier this year. Remove stray references to
it still in the tree.
Sponsored by: Netflix
compatibility layer. When /compat is located on a ZFS other than /,
mount would fail because they were not mounted.
Solve this by moving `linux` to depend on `zfs` which mounts all ZFS
filesystems.
Differential Revision: https://reviews.freebsd.org/D31848
MFC after: 2 weeks
Using /etc/jail.{jailname}.conf is nice, however it makes /etc/ very
messy if you have many jails. This patch allows one to move these
config files out of the way into /etc/jail.conf.d/{jailname}.conf.
Note that the same caveat as /etc/jail.*.conf applies: the jail service
will not autodiscover all of these for starting 'all' jails. This is
considered future work, since the behavior matches.
Reviewed by: kevans
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D24570
5fcdc19a81 didn't fully resolve the issue. There remains a report
that an ifconfig wlan0 up by itself is insufficient. Ifconfig down
must precede it.
Reported by: Filipe da Silva Santos <contact _ shiori_com_br>
Fixes: 5fcdc19a81
MFC after: 3 days
Some installations may experience CTRL-EVENT-SCAN-FAILED when
associating to an AP. Installations that specify
ifconfig_wlan0="WPA ... up" in rc.conf do not experience
the problem whereas those which specify ifconfig_wlan0="WPA" without
the "up" will experience CTRL-EVENT-SCAN_FAILED.
However those that specify "up" in ifconfig_wlan0 will be able to
reproduce this problem by service netif stop wlan0;
service netif start wlan0. Interestingly The service netif stop/start
problem is reproducible on the older wpa 2.9 as well.
Reported by: dhw
Reported by: "Oleg V. Nauman" <oleg _ theweb_org_ua>
Reported by: Filipe da Silva Santos <contact _ shiori_com_br>
Reported by: Jakob Alvermark <jakob _ alvermark_net>
MFC after: 3 days
