Original log:
Do not initialize the adapter on MTU change when adapter status is down.
This fixes long-standing problems when changing settings of the adapter.
Discussed in:
https://lists.freebsd.org/pipermail/freebsd-net/2016-June/045509.html
Reported by: Franco Fichtner <franco@opnsense.org>
MFH: 2 days
- iflib - add checksum in place support (mmacy)
- iflib - initialize IP for TSO (going to be needed for e1000) (mmacy)
- iflib - move isc_txrx from shared context to softc context (mmacy)
- iflib - Normalize checks in TXQ drainage. (shurd)
- iflib - Fix queue capping checks (mmacy)
- iflib - Fix invalid assert, em can need 2 sentinels (mmacy)
- iflib - let the driver determine what capabilities are set and what
tx csum flags are used (mmacy)
- add INVARIANTS debugging hooks to gtaskqueue enqueue (mmacy)
- update bnxt(4) to support the changes to iflib (shurd)
Some other various, sundry updates. Slightly more verbose changelog:
Submitted by: mmacy@nextbsd.org
Reviewed by: shurd
mFC after:
Sponsored by: LimeLight Networks and Dell EMC Isilon
(disabled by default).
To enable it, dev.rtwn.%d.radar_detection tunable need to be set
to a nonzero value.
Tested with RTL8821AU, AP mode (no radar events were seen - so,
I have no idea if it is really correct / working)
Reviewed by: adrian
Differential Revision: https://reviews.freebsd.org/D8903
* Firmware oriented NICs may need to sleep in their configuration paths.
Use RLOCK instead of WLOCK to allow this to again occur.
This fixes netmap on cxgbe.
* Change the worker lock to a normal mutex rather than a spin lock.
Drivers shouldn't be doing netmap work from the fast interrupt
handlers, so it's not required to be a spinlock.
Submitted by: luigi, Vincenzo Maffione <v.maffione@gmail.com>
Reviewed by: jhb
This allows the common code to use the correct type for the lock state
local variable passed to EFSYS_LOCK() and EFSYS_UNLOCK().
On Windows, this allows warning supression pragmas to be removed.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Wake-on-lan is not supported in production on any of our adapters, as
they don't have the required AUX power connector. (It's possible that
AUX power is supplied to some of our ALOM or mezz adapters, but if so
then we've never implemented or tested WoL support.)
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D8972
The previous API had various problems, including the length of the
caller provided buffer not being specified, no means being available
to discover how big the buffer needs to be, and a lack of clarity of
what the resulting list contains.
To fix it:
- add the buffer length as a parameter
- if the provided buffer is too short, fail with ENOSPC and return the
required length
- ensure that the list contents are valid and add comments
describing it
It is safe to change this API as, unsuprisingly, it has no users.
Submitted by: Mark Spender <mspender at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D8971
Manftest needs to know exactly what went wrong with the verified update
so that failing boards can be correctly diagnosed.
Submitted by: Tom Millington <tmillington at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D8969
In newer firmware that supports multithreaded MCDI processing,
longer running commands may be run ina background thread. Add
support for drivers to query the appropriate timeout for each
MCDI request.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D8968
Poll-mode driver does not use interrupts and number of used event queues
should not be limitted by the number of interrupts allocated for the
NIC.
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D8967
- Update struct link_settings and associated shared code.
- Add tunables to control FEC and autonegotiation. All ports inherit
these values as their initial settings.
hw.cxgbe.fec
hw.cxgbe.autoneg
- Add per-port sysctls to control FEC and autonegotiation. These can be
modified at any time.
dev.<port>.<n>.fec
dev.<port>.<n>.autoneg
MFC after: 3 days
Sponsored by: Chelsio Communications
This patch solves IRQ generation problems using the mlx5en(4) driver
with xenserver v6.5.0 in SRIOV and PCI-passthrough modes.
Until further the hw.pci.msix_rewrite_table quirk must be set manually
in /boot/loader.conf .
Reviewed by: jhb @
Sponsored by: Mellanox Technologies
MFC after: 2 weeks
ICC complains that enumerated type mixed with another type.
Found by DPDK upstream build sanity check.
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D8954
It is not 100% correct to assign non-enum values to enum type
variables.
Found by ICC build (DPDK PMD upstreaming).
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D8953
It is not safe to push TSO option descriptors if pacer bypass is
enabled, so to make sure that doesn't happen never push TSO option
descriptors.
Submitted by: Mark Spender <mspender at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D8952
The flag EFX_FILTER_MATCH_LOC_MAC_IG to represent filtering on the
individual/group bit of the MAC address (with the two cases being
distingusished by the MAC address in the filter specification) was
introduced to mirror the Linux driver filtering code, but the
implementations are different enough anyway that it isn't of much value.
Having separate flags for unknown unicast and multicast simplifies
the code and allows the set of flags to match those used by MCDI.
It will also makes it easier to report whether these filters are
supported.
In the MCDI definitions, the unknown multicast and unicast flags have
the values 0x40000000 and 0x80000000 respectively, and so using the
same values for simplicity requires 32 bits in the filter specification
to store the flags. This means the structure is now a little bigger
than 64 bytes, but filters are not often used on critical paths so this
shouldn't have much impact - on Linux they are also bigger than they
used to be.
Submitted by: Mark Spender <mspender at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D8951
It is required to minimize RxQ context in the driver or avoid chaising
for the NIC handle in adapter (global per-interface) structure.
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D8950
The semantics of the MCDI interfacve require reading the first
dword of the header before any other data in the buffer. Add
a barrier to the common code MCDI handler to enforce this.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D8949
The port mask used for per-port sensors in mcdi_sensor_map
assumes zero-based port numbering. The port mask used in
the code is based on the one-based MCDI port number.
Fix this to lookup the correct per-port sensors, and to
allow reporting of sensor events from higher port numbers.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D8947
Both Siena and EF10 use the siena_ev_qpoll() implementation, but this
function is not defined in builds without EFSYS_OPT_SIENA.
Remove siena_ev_qpoll and inline it into efx_ev_qpoll to allow it
to be used in non-Siena builds.
Also remove outdated FIXME comment, as EF10 event batching/merging has
been implemented long ago without needing to modify this code.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D8939
The function flags were changed to mirror the privileges, but
the privileges are preferred.
Submitted by: Mark Spender <mspender at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D8936
