Currently when the dataset is in use we can't receive snapshots.
zfs send test/1@asd | zfs recv -FM test/2
cannot unmount '/test/2': Device busy
This commits add option 'M' which attempts to forcibly unmount the
dataset. Thanks to this we can enforce receiving snapshots in a
single step.
Note that this functionality is not supported on Linux because the
VFS will prevent active mounted filesystems from being unmounted,
even with the force option. This is the intended VFS behavior.
Discussed-with: Pawel Jakub Dawidek <pjd@FreeBSD.org>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Allan Jude <allanjude@freebsd.org>
Differential Revision: https://reviews.freebsd.org/D22306openzfs/zfs@a57d3d45d6
zfs create, receive and rename can bypass this hierarchy rule. Update
both userland and kernel module to prevent this issue and use pyzfs
unit tests to exercise the ioctls directly.
Note: this commit slightly changes zfs_ioc_create() ABI. This allow to
differentiate a generic error (EINVAL) from the specific case where we
tried to create a dataset below a ZVOL (ZFS_ERR_WRONG_PARENT).
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Approved by: mav (mentor)
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
openzfs/zfs@d8d418ff0c
We've observed that on some highly fragmented pools, most metaslab
allocations are small (~2-8KB), but there are some large, 128K
allocations. The large allocations are for ZIL blocks. If there is a
lot of fragmentation, the large allocations can be hard to satisfy.
The most common impact of this is that we need to check (and thus load)
lots of metaslabs from the ZIL allocation code path, causing sync writes
to wait for metaslabs to load, which can take a second or more. In the
worst case, we may not be able to satisfy the allocation, in which case
the ZIL will resort to txg_wait_synced() to ensure the change is on
disk.
To provide a workaround for this, this change adds a tunable that can
reduce the size of ZIL blocks.
External-issue: DLPX-61719
Reviewed-by: George Wilson <george.wilson@delphix.com>
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes#8865openzfs/zfs@b8738257c2
MFC after: 2 weeks
This was the intent of the existing code, but instead it would
unconditionally load dtraceall.ko because of a stale errno value.
Reported by: pho
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
a single instance: use snd_recover also where sack_newdata was used.
Submitted by: Richard Scheffenegger
Differential Revision: https://reviews.freebsd.org/D18811
PPC64 ELFv2 acts like a "normal" platform in that it no longer needs
function descriptors. So, ensure we are only enabling them on ELFv1.
Additionally, ELFv2 requires that the ELF header have a nonzero e_flags,
so ensure that the synthesized ELF header in dt_link.c is setting it.
Reviewed by: jhibbits, markj
Approved by: gnn
Differential Revision: https://reviews.freebsd.org/D22403
By default, zpools may not be backed by zvols (that can be changed with the
"vfs.zfs.vol.recursive" sysctl). When that sysctl is set to 0, the kernel
does not attempt to read zvols when looking for vdevs. But the zpool command
still does. This change brings the zpool command into line with the kernel's
behavior. It speeds "zpool import" when an already imported pool has many
zvols, or a zvol with many snapshots.
PR: 241083
Reported by: Martin Birgmeier <d8zNeCFG@aon.at>
Reviewed by: mav, Ryan Moeller <ryan@freqlabs.com>
MFC after: 2 weeks
Sponsored by: Axcient
Differential Revision: https://reviews.freebsd.org/D22077
This will be used in libbe in place of the internal zmount(); libbe only
wants to be able to mount a dataset at an arbitrary mountpoint without
altering dataset/pool properties. The natural way to do this in a portable
way is by creating a zfs_mount_at() interface that's effectively zfs_mount()
+ a mountpoint parameter. zfs_mount() is now a light wrapper around the new
method.
The interface and implementation have already been accepted into ZFS On
Linux, and the next commit to switch libbe() over to this new interface will
solve the last compatibility issue with ZoL. The next sysutils/openzfs
rebase against ZoL should be able to build libbe/bectl with only minor
adjustments to build glue.
Reviewed by: Ryan Moeller <ryan freqlabs com>
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D23132
Previously libdtrace used ftok(3), which hashes the inode number of the
input object file. To increase reproducibility of builds that embed
USDT probes, include a hash of the object file path in the symbol name
instead.
Reported and tested by: bdrewery
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
arm64 is still lacking a fasttrap implementation, which is required to
actually enable userland probes, but this at least allows USDT probes to
be linked into userland applications.
Submitted by: Klaus Küchemann <maciphone2@googlemail.com> (original)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D22360
gcc9 grew a new warning for unbounded allocas, such as the one in
dt_options_load. Remove both uses of alloca in dt_options.c.
Reviewed by: markj
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D22880
Update a bunch of Makefile.depend files as
a result of adding Makefile.depend.options files
Reviewed by: bdrewery
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org/D22494
illumos/illumos-gate@555d674d5d555d674d5dhttps://www.illumos.org/issues/10592
This is a collection of recent fixes from ZoL:
8eef997679 Error path in metaslab_load_impl() forgets to drop ms_sync_lock
928e8ad47d Introduce auxiliary metaslab histograms
425d3237ee Get rid of space_map_update() for ms_synced_length
6c926f426a Simplify log vdev removal code
21e7cf5da8 zdb -L should skip leak detection altogether
df72b8bebe Rename range_tree_verify to range_tree_verify_not_present
75058f3303 Remove unused vdev_t fields
Portions contributed by: Jerry Jelinek <jerry.jelinek@joyent.com>
Author: Serapheim Dimitropoulos <serapheim@delphix.com>
MFC after: 4 weeks
illumos/illumos-gate@663207adb1663207adb1
10601 Pool allocation classes
https://www.illumos.org/issues/10601
illumos port of ZoL Pool allocation classes. Includes at least these two
commits:
441709695 Pool allocation classes misplacing small file blocks
cc99f275a Pool allocation classes
10757 Add -gLp to zpool subcommands for alt vdev names
https://www.illumos.org/issues/10757
Port from ZoL of
d2f3e292d Add -gLp to zpool subcommands for alt vdev names
Note that a subsequent ZoL commit changed -p to -P
a77f29f93 Change full path subcommand flag from -p to -P
Portions contributed by: Jerry Jelinek <jerry.jelinek@joyent.com>
Portions contributed by: Håkan Johansson <f96hajo@chalmers.se>
Portions contributed by: Richard Yao <ryao@gentoo.org>
Portions contributed by: Chunwei Chen <david.chen@nutanix.com>
Portions contributed by: loli10K <ezomori.nozomu@gmail.com>
Author: Don Brady <don.brady@delphix.com>
11541 allocation_classes feature must be enabled to add log device
illumos/illumos-gate@c1064fd7cec1064fd7cehttps://www.illumos.org/issues/11541
After the allocation_classes feature was integrated, one can no longer add a
log device to a pool unless that feature is enabled. There is an explicit check
for this, but it is unnecessary in the case of log devices, so we should handle
this better instead of forcing the feature to be enabled.
Author: Jerry Jelinek <jerry.jelinek@joyent.com>
FreeBSD notes.
I faithfully added the new -g, -L, -P flags, but only -g does something:
vdev GUIDs are displayed instead of device names. -L, resolve symlinks,
and -P, display full disk paths, do nothing at the moment.
The use of special vdevs is backward compatible for read-only access, so
root pools should be bootable, but exercise caution.
MFC after: 4 weeks
Somehow I managed to commit the manual page with unresolved conflicts in
it.
While here, I also replaced .sp with .Pp.
MFC after: 3 weeks
X-MFC with: r354804
The DOF file output by dtrace -A contains only the loadable sections.
However, as it was created by a call to dtrace_dof_create() without
flags, the original DOF was created with the loadable sections. The
result is that the DOF includes the section headers for the unloadable
sections (COMMENTS and UTSNAME) without these sections actually being
present. This is inconsistent.
A simple change to anon_prog() ensures that the missing sections are
present in the outputted DOF. Alternatively, the call to
dtrace_dof_create() could pass the DTRACE_D_STRIP flag stripping out the
loadable sections. As the unloadable sections contain info useful for
debugging purposes they haven't been stripped.
Submitted by: Graeme Jenkinson <graeme.jenkinson@cl.cam.ac.uk>
MFC after: 1 week
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D21875
Since r354804 libzpool depends on libzfs for get_system_hostid symbol.
Except for zstreamdump, all binaries linked with libzpool were already
linked with libzfs. So, zstreamdump is the only fall-out.
It's interesting that on amd64 not only I was able to successfully build
zstreamdump, I am able to run it despite having the unresolved symbol in
libzpool.
MFC after: 4 weeks
X-MFC with: r354804
10499 Multi-modifier protection (MMP)
illumos/illumos-gate@e0f1c0afa4e0f1c0afa4https://www.illumos.org/issues/10499
Port the following ZFS commits from ZoL to illumos.
379ca9cf2 Multi-modifier protection (MMP)
bbffb59ef Fix multihost stale cache file import
0d398b256 Do not initiate MMP writes while pool is suspended
10701 Correct lock ASSERTs in vdev_label_read/write
illumos/illumos-gate@58447f688d58447f688dhttps://www.illumos.org/issues/10701
Port of ZoL commit:
0091d66f4e Correct lock ASSERTs in vdev_label_read/write
At a minimum, this fixes a blown assert during an MMP test run when running on
a DEBUG build.
11770 additional mmp fixes
illumos/illumos-gate@4348eb90124348eb9012https://www.illumos.org/issues/11770
Port a few additional MMP fixes from ZoL that came in after our
initial MMP port.
4ca457b065 ZTS: Fix mmp_interval failure
ca95f70dff zpool import progress kstat
(only minimal changes from above can be pulled in right now)
060f0226e6 MMP interval and fail_intervals in uberblock
Note from the committer (me).
I do not have any use for this feature and I have not tested it. I only
did smoke testing with multihost=off.
Please be aware.
I merged the code only to make future merges easier.
Portions contributed by: Jerry Jelinek <jerry.jelinek@joyent.com>
Portions contributed by: Tim Chase <tim@chase2k.com>
Portions contributed by: sanjeevbagewadi <sanjeev.bagewadi@gmail.com>
Portions contributed by: John L. Hammond <john.hammond@intel.com>
Portions contributed by: Giuseppe Di Natale <dinatale2@llnl.gov>
Portions contributed by: Prakash Surya <surya1@llnl.gov>
Portions contributed by: Brian Behlendorf <behlendorf1@llnl.gov>
Author: Olaf Faaland <faaland1@llnl.gov>
MFC after: 4 weeks
This change is based on
r354380 8899 zpool list property documentation doesn't match actual behaviour
There is no "used" pool property, "alloc" is actually spelled
"allocated".
MFC after: 5 days
illumos/illumos-gate@9c2acf00e29c2acf00e2https://www.illumos.org/issues/10554
During the port of MMP (illumos bug 10499) from ZoL, I found this
earlier ZoL project is a prerequisite. Here is the original
description. This addition will enable us to sync an open TXG to the
main pool on demand. The functionality is similar to 'sync(2)' but
'zpool sync' will return when data has hit the main storage instead of
potentially just the ZIL as is the case with the 'sync(2)' cmd.
Portions contributed by: Jerry Jelinek <jerry.jelinek@joyent.com>
Author: Alek Pinchuk <apinchuk@datto.com>
MFC after: 3 weeks
Relnotes: possibly
Port illumos change: https://www.illumos.org/issues/11667
Move lz4.c out of zfs tree to opensolaris/common/lz4, adjust it to be
usable from kernel/stand/userland builds, so we can use just one single
source. Add lz4.h to declare lz4_compress() and lz4_decompress().
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D22037
This patch modifies the zfs_ioc_snapshot_list_next() ioctl to enable it
to take input parameters that alter the way looping through the list of
snapshots is performed. The idea here is to restrict functions that
throw away some of the snapshots returned by the ioctl to a range of
snapshots that these functions actually use. This improves efficiency
and execution speed for some rollback and send operations.
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Signed-off-by: Alek Pinchuk <apinchuk@datto.com>
Closes#8077zfsonlinux/zfs@4c0883fb4a
MFC after: 2 weeks
illumos/illumos-gate@7931524763
FreeBSD note: some tweaking was needed to avoid a conflict with
sys/rangelock.h.
Author: Matthew Ahrens <mahrens@delphix.com>
Obtained from: illumos
MFC after: 3 weeks
Not sure if we need anything better.
Maybe we should try to port illumos libfakekernel or provide something
similar natively.
MFC after: 4 weeks
X-MFC with: r353618
illumos/illumos-gate@a0b03b161ca0b03b161chttps://www.illumos.org/issues/10330
3 recent ZoL changes in the vdev and metaslab code which we can pull over:
PR 8324 c853f382db 8324 Change target size of metaslabs from 256GB to 16GB
PR 8290 b194fab0fb 8290 Factor metaslab_load_wait() in metaslab_load()
PR 8286 419ba59145 8286 Update vdev_is_spacemap_addressable() for new spacemap
encoding
Author: Serapheim Dimitropoulos <serapheimd@gmail.com>
Obtained from: illumos, ZoL
MFC after: 2 weeks
8423 8199 7432 Implement large_dnode pool feature
7432 Large dnode pool feature
8199 multi-threaded dmu_object_alloc()
8423 Implement large_dnode pool feature
10406 large_dnode changes broke zfs recv of legacy stream
llumos/illumos-gate@54811da5ac54811da5achttps://www.illumos.org/issues/8423https://www.illumos.org/issues/8199https://www.illumos.org/issues/7432illumos/illumos-gate@811964cd9f811964cd9fhttps://www.illumos.org/issues/10406
ZoL issues:
Improved dnode allocation #6564
Clean up large dnode code #6262
Fix dnode_hold() freeing dnode behavior #8172
Fix dnode allocation race #6414, #6439
Partial: Raw sends must be able to decrease nlevels #6821, #6864
Remove unnecessary txg syncs from receive_object() Closes#7197
This updates FreeBSD large_dnode code (that was imported from ZoL) to a
version that was committed to illumos. It has some cleanups,
improvements and fixes comparing to what we have in FreeBSD now.
I think that the most significant update is 8199 multi-threaded
dmu_object_alloc().
This commit reverts r351077 that was a revert of r351074 and r351076 and
restores those changes. Required atomic operations should be available
now on all platforms where we build ZFS.
Obtained from: illumos
MFC after: 3 weeks
The feature is implemented as an extension of the existing
ZFS_IOC_RENAME ioctl. Both the userland and the DSL interfaces support
renaming only a single bookmark at a time. As of now, there is no ZCP
interface to the new functionality. I am going to add it once the DSL
interface passes a test of time.
This change picks up support for zfs_ioc_namecheck_t::ENTITY_NAME that
was added to ZoL as part of Redacted Send/Receive feature by Paul
Dagnelie <pcd@delphix.com>. This is needed to allow a bookmark name in
zc_name.
Discussed with: mahrens
Reviewed by: bcr (man page)
Sponsored by: CyberSecure
Differential Revision: https://reviews.freebsd.org/D21795
Add a small wrapper around libzfs_core's lzc_send_space() to libzfs so
that every legacy ZFS_IOC_SEND consumer, along with their userland
counterpart estimate_ioctl(), can leverage ZFS_IOC_SEND_SPACE to
request send space estimation.
The legacy functionality in zfs_ioc_send() is left untouched for
compatibility purposes.
Obtained from: ZoL
Obtained from: zfsonlinux/zfs@cf7684bc8d
Author: loli10K <ezomori.nozomu@gmail.com>
MFC after: 2 weeks
Although there is always a single stream and the total size in the
summary is always equal to the size reported for the stream, it's nice
to follow the usual output format.
MFC after: 3 days
zfsonlinux/zfs@835db58592
We have long supported estimating a size of an incremental stream from a
snapshot. We should do the same for bookmarks as well.
Obtained from: ZoL
Author: loli10K <ezomori.nozomu@gmail.com>
MFC after: 3 days
Those commands are needed to repair a FreeBSD installation so add them
to the runtime package
Reviewed by: bapt, gjb
Differential Revision: https://reviews.freebsd.org/D21498
This fixes a hole in the situation where the resume state is left from
receiving a new dataset and, so, the state is set on the dataset itself
(as opposed to %recv child).
Additionally, distinguish incremental and resume streams in error
messages.
This was also committed to ZoL:
zfsonlinux/zfs@ebeb6f23bf
MFC after: 2 weeks
Sponsored by: CyberSecure
