Only perform the call when a qfull bit transitions. While here, avoid
assignments in declarations in iwm_mvm_rx_tx_cmd().
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
This ensures that the driver softc reflects device capabilities as early
as possible, for use by device initialization code that is conditional
on certain capabilities.
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Also ensure that the htole* macros are applied correctly when specifying
the segment length and upper address bits. No functional change
intended (unless you use iwm(4) on a big-endian machine).
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
This is a standard required property for interrupt controllers, and present
on the bcm_lintc nodes for currently supported RPi models. For the RPi4, we
have both bcm_lintc as well as GIC-400, but only one may be active at a
time.
Don't probe bcm_lintc if it's missing the "interrupt-controller" property --
in RPi 4 DTS, the bcm_lintc node is actually missing this along with other
required interrupt properties. Presumably, if the earlier boot stages will
support switching to the legacy interrupt controller (as is suggested
possible by the documentation), the DTS will need to be updated to indicate
the proper interrupt-parent and hopefully also mark this node as an
interrupt-controller instead.
handlers can be greatly simplified. All the previous double
cycling and complex locking was added to avoid these functions
holding global PCB locks for extended period of time, preventing
addition of new entries.
in the network epoch, we can greatly simplify synchronization.
Remove all unneccesary epoch enters hidden under INP_INFO_RLOCK macro.
Remove some unneccesary assertions and convert necessary ones into the
NET_EPOCH_ASSERT macro.
x86 stack_save_td_running() can work safely only if IPI_TRACE is a
non-maskable interrupt. But at the moment FreeBSD/Xen does not provide
support for the NMI delivery mode. So, mark the functionality as
unsupported similarly to other platforms without NMI.
Maybe there is a way to provide a Xen-specific working
stack_save_td_running(), but I couldn't figure it out.
MFC after: 3 weeks
Sponsored by: Panzura
locking in udp_output() and udp6_output().
First, we select if we need read or write lock in PCB itself, we take
the lock and enter network epoch. Then, we proceed for the rest of
the function. In case if we need to modify PCB hash, we would take
write lock on it for a short piece of code.
We could exit the epoch before allocating an mbuf, but with this
patch we are keeping it all the way into ip_output()/ip6_output().
Today this creates an epoch recursion, since ip_output() enters epoch
itself. However, once all protocols are reviewed, ip_output() and
ip6_output() would require epoch instead of entering it.
Note: I'm not 100% sure that in udp6_output() the epoch is required.
We don't do PCB hash lookup for a bound socket. And all branches of
in6_select_src() don't require epoch, at least they lack assertions.
Today inet6 address list is protected by rmlock, although it is CKLIST.
AFAIU, the future plan is to protect it by network epoch. That would
require epoch in in6_select_src(). Anyway, in future ip6_output()
would require epoch, udp6_output() would need to enter it.
we lookup PCBs. Thus, do not enter epoch recursively in
in_pcblookup_hash() and in6_pcblookup_hash(). Same applies to
tcp_ctlinput() and tcp6_ctlinput().
This leaves several sysctl(9) handlers that return PCB credentials
unprotected. Add epoch enter/exit to all of them.
Differential Revision: https://reviews.freebsd.org/D22197
- amd_intr() does not account for the offset (0x200) in the counter
MSR address and ends up accessing invalid regions while reading
counter value after the 4th counter (0xC001000[8,9,..]) and
erroneously updates the counter values for counters [1-4].
- amd_intr() should only check core pmcs for interrupts since
other types of pmcs (L3,DF) cannot generate interrupts.
- fix pmc NMI's being ignored due to NMI latency on newer AMD processors
Note that this fixes a kernel panic due to GPFs accessing MSRs on
higher core count AMD cpus (seen on both Rome 7502P, and
Threadripper 2990WX 32-core CPUs)
Discussed with: markj
Submitted by: Shreyank Amartya
Differential Revision: https://reviews.freebsd.org/D21553
These files already have 'device' lines that they require; adding a
dependency on SOC_* options is an extra restriction that adds extra
verbosity when future supported Broadcom-based SOC will also feature the
same compatible device.
Users wishing to not compile these devices in should remove the 'device'
lines from their config.
In preparation for another change factor out various variable cleanups.
These mainly include:
(1) do not assign values to variables during declaration: this makes
the code more readable and does allow for better grouping of
variable declarations,
(2) do not assign values to variables before need; e.g., if a variable
is only used in the 2nd half of a function and we have multiple
return paths before that, then do not set it before it is needed, and
(3) try to avoid assigning the same value multiple times.
MFC after: 3 weeks
Sponsored by: Netflix
Before the page busy code was converted to make direct use of
sleepqueues, this was handled by _sleep().
Reported by: glebius
Reviewed by: kib
Sponsored by: The FreeBSD Foundation
[libc++] Add `__truncating_cast` for safely casting float types to
integers
This is needed anytime we need to clamp an arbitrary floating point
value to an integer type.
Thanks to Eric Fiselier for the patch.
Differential Revision: https://reviews.llvm.org/D66836
llvm-svn: 370891
Merge commit b92deded8 from llvm git (by Louis Dionne):
[libc++] Move __clamp_to_integral to <cmath>, and harden against
min()/max() macros
llvm-svn: 370900
Merge commit 0ec6a4882 from llvm git (by Louis Dionne):
[libc++] Fix potential OOB in poisson_distribution
See details in the original Chromium bug report:
https://bugs.chromium.org/p/chromium/issues/detail?id=994957
Together, these fix a security issue in libc++'s implementation of
std::poisson_distribution, which can be exploited to read data which is
out of bounds.
Note there are no programs in the FreeBSD base system that use
std::poisson_distribution, so this is only a possible issue for ports
and external programs which have been built against libc++. Therefore,
I am bumping __FreeBSD_version for the benefit of our port maintainers.
Requested by: emaste
Security: potential OOB read
MFC after: 3 days
These are direct copies of the 32 bit functions, adjusted ad needed.
While here fix atomic_fcmpset_16 to use the valid load and store exclusive
instructions.
Sponsored by: DARPA, AFRL
In the cases where Linux returns an error (e.g. passing in an undefined
flag) there's no need for us to emit a message. (The target of this
message is a developer working on the linuxulatorm, not the author of
presumably broken Linux software).
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21606
interface has changed.
During vlan reconfiguration without destroying interface, it is possible,
that parent interface will be changed. This usually means, that link
layer address of vlan will be different. Therefore we need to update all
associated with vlan's addresses permanent llentries - NDP for IPv6
addresses, and ARP for IPv4 addresses. This is done via lladdr_task
execution. To avoid extra work, before execution do the check, that L2
address is different.
No objection from: #network
Obtained from: Yandex LLC
MFC after: 1 week
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D22243
illumos/illumos-gate@9c2acf00e29c2acf00e2https://www.illumos.org/issues/10554
During the port of MMP (illumos bug 10499) from ZoL, I found this
earlier ZoL project is a prerequisite. Here is the original
description. This addition will enable us to sync an open TXG to the
main pool on demand. The functionality is similar to 'sync(2)' but
'zpool sync' will return when data has hit the main storage instead of
potentially just the ZIL as is the case with the 'sync(2)' cmd.
Portions contributed by: Jerry Jelinek <jerry.jelinek@joyent.com>
Author: Alek Pinchuk <apinchuk@datto.com>
MFC after: 3 weeks
Relnotes: possibly
and busy pages. Add code that would carefully cleanups the state in case
of synchronous error return. Cover a case when a first I/O went on
asynchronously, but second or N-th returned error synchronously.
In collaboration with: chs
Reviewed by: jtl, kib
If we pass in a NULL mbuf to m_pulldown() we are in a bad situation
already. There is no point in doing that check for production code.
Change the if () panic() into a KASSERT.
MFC after: 3 weeks
Sponsored by: Netflix
a tmpfs to be mounted there, and because they like to verify it's
actually a mountpoint, a symlink won't do.
Reviewed by: dchagin (earlier version)
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20333
The Microchip LAN7430 is a PCIe 10/100/1000 Ethernet MAC with integrated
PHY, and the LAN7431 is a MAC with RGMII interface.
To be connected to the build after further testing and review.
Committing now so that changes like r354345 (adding a common
ETHER_IS_ZERO macro) will update this driver too.
Submitted by: Gerald ND Aryeetey <aryeeteygerald_rogers.com>
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20079
On platforms where pointers are larger than 64-bits, struct statsblob
may be harmlessly padded out such that opaque[] always has some included
space. Make the assertion more general by comparing to the offset of
opaque rather than the size of struct statsblob.
Discussed with: jhb, James Clarke
Reviewed by: trasz, lstewart
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D22188
In the past, we would add symbolic links for MACHINE_CPUARCH when it differed
from MACHINE. This was for pc98 only, however. All other architectures didn't
need this and it was really due to pc98 pulling from i386 rather than something
more intrinsic. At the time, we had the split we did to mimic what NetBSD did
for its 68k ports where many different kernels were possible for the same
architecture. Since then, both projects have moved away from this convention to
having a more generic MACHINE for each architecture. FreeBSD's new arm64/aarch64
breaks this old notion and so was an exception to the rule. So, we no longer
need to create this link for any old machine or any new machine, delete it
entirely.
Differential Revision: https://reviews.freebsd.org/D22246
The pages stored in the ksyms object are not pageable. Moreover, this
obviates the need to set OBJ_NOSPLIT.
Reviewed by: alc, kib
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D22229
Since r354156 we may call release_page() without the page's object lock
held, specifically following the page copy during a CoW fault.
release_page() must therefore unbusy the page only after scheduling the
requeue, to avoid racing with a free of the page. Previously, the
object lock prevented this race from occurring.
Add some assertions that were helpful in tracking this down.
Reported by: pho, syzkaller
Tested by: pho
Reviewed by: alc, jeff, kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D22234
