Commit Graph

20076 Commits

Author SHA1 Message Date
Greg Lehey
6eb38370fb Remove MAINTAINER. 2000-04-16 00:17:46 +00:00
Duncan Barclay
9273e2696c A messy commit that checkpoints the driver (not known to actually work)
before I rip out the scheduler - whilst v. nice 'n all, it is doing the
wrong job. We need something that sends commands to the card atomically
so dhcp etc. works right.

I've renamed and moved a lot of the scheduler code so that it is all
in one place and all starts with ray_cmd_

ray_stop has some debugging crap left in - to be deleted rsn
2000-04-15 19:51:18 +00:00
Duncan Barclay
7bc2218cb9 Merged in a load of information from the card documentation - not finished yet. 2000-04-15 19:44:05 +00:00
Duncan Barclay
f448abcd92 A few comment tidy-ups.
Add a %b printf descriptor

Change the START command to DOWNLOAD to avoid confusion with start
as in transmitting a packet.
2000-04-15 19:21:02 +00:00
Jeroen Ruigrok van der Werven
aec5a3b342 Fix typo, extentions -> extensions
Submitted by:	George Cox <gjvc@sophos.com>
2000-04-15 18:46:15 +00:00
Robert Watson
7ef47eec4c ext2fs relies on UFS support code, and as a result also requires
extattr.h to be included.  This fixes the broken ext2fs build as of
the import of extattr code.

Also added $FreeBSD: $ to a couple of files that didn't have them,
without which I couldn't commit this fix.

Reported by:    "George W. Dinolt" <gdinolt@pacbell.net>
2000-04-15 17:14:22 +00:00
Gerard Roudier
454af27b5c First patch that prepares for the adding of multi-firmware
support. Changes are rather simplifications of the SCRIPTS
interface (prior to complexifying it again;) ), dead code
removes and comment fixes.

Code removed:
- Handling of kernel variables referenced from SCRIPTS.
- Handling of selection without ATN.

Slightly rewritten:
- Handling of illegal phase (4/5) and data overrun conditions.

Simplifications:
- Extended error flag and bits now only set from the C code.
- Move the extended error status (xerr_status) and nego
  status (nego_status) outside the data structure accessed
  by SCRIPTS (struct dsb).
- Get rid of the script status field (scr_st).
- Only patch SCR_NO_OP SCRIPTS instructions to adapt SCRIPTS
  to actual chip capabilities.

Cosmetic changes:
- Miscellaneous comments in SCRIPTS.
- FreeBSD_4_Bus define replaced by FreeBSD_Bus_Io_Abstraction.
2000-04-15 10:54:58 +00:00
Roger Hardiman
15c204466e Add include files to alpha/include directory.
Eventually the i386/include and alpha/include header files for the bktr
driver will be moved to a common directory.
2000-04-15 08:07:56 +00:00
Roger Hardiman
2767d675a6 Update to driver 2.11.
Driver now compiles on FreeBSD/Alpha, but still requires testing.
Remove a printf, submitted by Chris D. Faulhaber <jedgar@fxp.org>
2000-04-15 07:46:19 +00:00
Poul-Henning Kamp
8177437d85 Complete the bio/buf divorce for all code below devfs::strategy
Exceptions:
        Vinum untouched.  This means that it cannot be compiled.
        Greg Lehey is on the case.

        CCD not converted yet, casts to struct buf (still safe)

        atapi-cd casts to struct buf to examine B_PHYS
2000-04-15 05:54:02 +00:00
Cameron Grant
603ddb6d5d make mmap sort-of work. there seem to be interactions with certain hw
drivers, so still work in progress.

do various mmap-related ioctls right.

improve blocksize control.

bits of cleanup.
2000-04-15 05:04:12 +00:00
Robert Watson
a64ed08955 Introduce extended attribute support for FFS, allowing arbitrary
(name, value) pairs to be associated with inodes.  This support is
used for ACLs, MAC labels, and Capabilities in the TrustedBSD
security extensions, which are currently under development.

In this implementation, attributes are backed to data vnodes in the
style of the quota support in FFS.  Support for FFS extended
attributes may be enabled using the FFS_EXTATTR kernel option
(disabled by default).  Userland utilities and man pages will be
committed in the next batch.  VFS interfaces and man pages have
been in the repo since 4.0-RELEASE and are unchanged.

o ufs/ufs/extattr.h: UFS-specific extattr defines
o ufs/ufs/ufs_extattr.c: bulk of support routines
o ufs/{ufs,ffs,mfs}/*.[ch]: hooks and extattr.h includes
o contrib/softupdates/ffs_softdep.c: extattr.h includes
o conf/options, conf/files, i386/conf/LINT: added FFS_EXTATTR

o coda/coda_vfsops.c: XXX required extattr.h due to ufsmount.h
(This should not be the case, and will be fixed in a future commit)

Currently attributes are not supported in MFS.  This will be fixed.

Reviewed by:	adrian, bp, freebsd-fs, other unthanked souls
Obtained from:	TrustedBSD Project
2000-04-15 03:34:27 +00:00
Ruslan Ermilov
b5e819ec23 Apply TCP_EXPIRE_CONNECTED (86400 seconds) timeout only to established
connections, after SYN packets were seen from both ends.  Before this,
it would get applied right after the first SYN packet was seen (either
from client or server).  With broken TCP connection attempts, when the
remote end does not respond with SYNACK nor with RST, this resulted in
having a useless (ie, no actual TCP connection associated with it) TCP
link with 86400 seconds TTL, wasting system memory.  With high rate of
such broken connection attempts (for example, remote end simply blocks
these connection attempts with ipfw(8) without sending RST back), this
could result in a denial-of-service.

PR:		bin/17963
2000-04-14 15:34:55 +00:00
Bill Paul
9ed5b61bdd Change && to || in probe routine so that the mlphy driver doesn't
incorrectly attach itself to ThunderLAN adapters which happen to have
a PHY who's model number happens out to be 0.

Problem reported by: Peter L. Thomas <Pete@painless-computing.com>
2000-04-14 15:31:48 +00:00
Bill Paul
1d6431f625 Add vendor/device codes for SmartBridges SmartLink USB ethernet adapter
(which is actually a CATC Netmate).

Gee. I don't know why people make such a fuss over supporting USB ethernet
NICs. This is easier than collecting graft.
2000-04-14 14:46:22 +00:00
Bill Paul
92ed1e40ae Regenerate. 2000-04-14 14:44:54 +00:00
Bill Paul
cd29a8ae0f Add entry for SmartBridges SmartLink USB ethernet adapter. 2000-04-14 14:43:34 +00:00
Yoshihiro Takahashi
b638de134f The printf function of boot2 can't recognize "%lx" format.
Submitted by:	Nobuyuki Koganemaru <kogane@koganemaru.co.jp>
2000-04-14 14:25:13 +00:00
Yoshihiro Takahashi
1e6081a12f Merged from sys/boot/i386/loader/Makefile revision 1.43. 2000-04-14 13:51:14 +00:00
Yoshihiro Takahashi
e81dafee50 Added wdreg.h. PC-98 still uses the wd driver. 2000-04-14 11:29:15 +00:00
Jonathan Lemon
e6affa6696 Change the maximum I/O transfer size to DFLTPHYS. This should fix
write corruption that some users were experiencing.
2000-04-13 23:42:55 +00:00
Matthew N. Dodd
22ca1311c0 - Add an additional call to eisa_add_iospace() so we get the right IOPORT
in attach.
- Change a EISA_CHANNEL_CLEAR to EISA_CHANNEL_BUSY in ida_v1_submit().

This may fix the problem with EISA IDA adapters though we have not heard
back from testers yet.

Reviewed by:	 jlemon
2000-04-13 18:09:05 +00:00
Ruslan Ermilov
a29006665c A complete reformatting of manual page. 2000-04-13 14:04:01 +00:00
Yoshihiro Takahashi
f71c82a792 Added wdreg.h and fixed path. 2000-04-13 10:37:49 +00:00
Warner Losh
3a6352bdee checkpoint latest pccard/pcic hacking:
o Eliminate cross calls between the devices.  Instead move to using the
  newbus messaging system.  Added three new card calls: attach_card,
  detach_card, get_type.
o Eliminate interrupt routine in pccard we never use.
o Move from deactivate to detach for removing cards.
o Start mapping CIS memory, but it is broken and causes panics.  At least
  it is closer to working than before.
o Eliminate struct device everywhere.  It was bogus.
o Initialize softc for pccard device so we have valid pointers to
  ourselves.
o Implement routine to find the pcic ivar for a child device of the pccard so
  we can use it to talk to the pcic hardware.
o Lots of minor tiding up.

This version now panics when we try to read the CIS.  The next batch
of work to make this work is what was outlined in my posting to mobile
about resource allocation and such.
2000-04-13 06:42:58 +00:00
Greg Lehey
7a1d9495b7 Enable building Vinum on alpha.
Submitted-by:	Bernd Walter <ticso@cicely.de>
Reminded-by:	Pedro A M Vazquez <vazquez@iqm.unicamp.br>
2000-04-13 04:08:24 +00:00
Archie Cobbs
71bd3f0cc1 Only build the ng_mppc KLD if !NOCRYPT and required crypto sources exist. 2000-04-12 19:57:32 +00:00
Archie Cobbs
ee5bb5a822 Revert to previous state, plus a few cleanups pointed out by bde.
Instead, make the decision as to whether to build this KLD in ../Makefile.
2000-04-12 19:56:16 +00:00
Ruslan Ermilov
f167e54283 Make partially specified permanent links without `dst_addr'
but with `dst_port' work for outgoing packets.

This case was not handled properly when I first fixed this
in revision 1.17.

This change is also required for the upcoming improved PPTP
support patches -- that is how I found the problem.

Before this change:

# natd -v -a aliasIP \
  -redirect_port tcp localIP:localPORT publicIP:publicPORT 0:remotePORT

Out [TCP]  [TCP] localIP:localPORT -> remoteIP:remotePORT aliased to
           [TCP] aliasIP:localPORT -> remoteIP:remotePORT

After this change:

# natd -v -a aliasIP \
  -redirect_port tcp localIP:localPORT publicIP:publicPORT 0:remotePORT

Out [TCP]  [TCP] localIP:localPORT -> remoteIP:remotePORT aliased to
           [TCP] publicIP:publicPORT -> remoteIP:remotePORT
2000-04-12 18:44:50 +00:00
Archie Cobbs
52ec4a0370 Fix uninitialized variable.
PR:		kern/17911
Submitted by:	Tom Pavel <pavel@alum.mit.edu>
2000-04-12 17:29:33 +00:00
KATO Takenori
df01d25d3e Include pc98.h instead of isareg.h.
Submitted by:	Akio Morita <amorita@meadow.scphys.kyoto-u.ac.jp>
Reminded by:	nyan
2000-04-12 14:08:02 +00:00
KATO Takenori
86cc4d7dfa - Fixed counter number (timer2 -> timer1).
- Fixed operator in pcaintr (andb -> orb).

Pointed out by:	nyan
2000-04-12 13:19:44 +00:00
Yoshihiro Takahashi
00add4ed4f The nss driver is compatible mode.
Submitted by:	Akio Morita <amorita@meadow.scphys.kyoto-u.ac.jp>
2000-04-12 13:02:54 +00:00
Yoshihiro Takahashi
8f230c9baf - Release allocated resources on error.
Reported by YAMAMOTO Shigeru <shigeru@iij.ad.jp>
- Clean up some code.
- Set the value of rid variable to PCI_BASEADR0(== 0x10) (adv_pci.c).
2000-04-12 11:32:13 +00:00
KATO Takenori
cae3675927 Merged from sys/i386/isa/isa_compat.c revisions 1.19 and 1.20. 2000-04-12 11:23:16 +00:00
Yoshihiro Takahashi
f3e2cba02f Set the value of rid variable for bus_alloc_resource(dev, SYS_RES_IOPORT,...)
to PCI_BASE_ADDR0 (== 0x10).

Tested by:	Brian Somers <brian@Awfulhak.org>
2000-04-12 11:21:55 +00:00
KATO Takenori
49a8300403 Merged from sys/conf/Makefile.i386 rev 1.182. 2000-04-12 11:19:56 +00:00
KATO Takenori
117a0be4e9 Merged from sys/boot/i386/loader/main.c rev 1.19. 2000-04-12 11:17:08 +00:00
Semen Ustimenko
0f9ee76b22 Driver is now using miibus, and newbus.
PR:		kern/17601
2000-04-12 06:51:43 +00:00
Semen Ustimenko
b3f8014465 Premier version of Makefile to build tx driver as KLD 2000-04-11 18:40:30 +00:00
Semen Ustimenko
5f045e1e09 As tx driver was patched for newbus, we can now build it as module!
Add it to Makefile.
2000-04-11 18:39:52 +00:00
Semen Ustimenko
b72407814b Added code to handle QS6612 PHY as standard NS PHY
for support of tx driver.
2000-04-11 18:39:00 +00:00
Archie Cobbs
2a92d3584c Turn off build of ng_mppc KLD until I can figure out how to have the
Makefile correctly handle all the possible permutations (including
missing crypto sources). Suggestions welcome.
2000-04-11 17:14:48 +00:00
John Baldwin
2cb6d95d48 Add a missing dependency: boot2 depends on the BTX kernel. 2000-04-11 14:49:13 +00:00
Wes Peters
732f6a4376 PR: kern/17872
Submitted by:	csg@waterspout.com (C. Stephen Gunn)
2000-04-11 06:55:09 +00:00
Mike Smith
421f2f7d74 Add features required for basic userland management utility:
- implement user-initiated background drive rebuild
 - implement user-initiated background consistency check
 - log controller-initiated background rebuild/check operations

Try to fix the elusive "invalid log operation" bug, and panic if we do
hit this one in the hopes of getting better information.

Tidy up diagnostic messages.

Try to use disk_create/disk_destroy correctly.  This isn't working
properly yet, but it's not clear whose fault that is.
2000-04-11 02:52:46 +00:00
Archie Cobbs
8e5b414e24 Turn off MPPE encryption if NOCRYPT is defined. If neither compression
nor encryption is enabled, don't build or install anything.
2000-04-10 22:22:18 +00:00
Jeroen Ruigrok van der Werven
9d45f43586 The ASUSCOM_IPAC isn't broken according to submitter.
PR:		17840
Submitted by:	Ari Suutari <ari@suutari.iki.fi>
2000-04-10 18:33:23 +00:00
Archie Cobbs
a2b408ad06 Add new options NETGRAPH_MPPC_COMPRESSION and NETGRAPH_MPPC_ENCRYPTION.
(Note: NETGRAPH_MPPC_COMPRESSION is disabled until we find a non-proprietary
implementation of the MPPC compression algorithm.)
2000-04-09 21:15:23 +00:00
Duncan Barclay
5cda0b02eb Most of this commit are minor changes whilst trying to make the driver
robust enough to work with dhcp. Essentially the driver returns to userland
before certain commands have been completed by the card. I'm trying to
work out the best way to fix this. There are very minor functional changes,
most of this is debugging.

Rework of debugging so a bit mask is used and re-allocation around the place.

Tried to protect ray_init with a tsleep until the network has been joined. I think this is only a partial fix as we also update the mcast and promisc
values.
2000-04-09 21:07:43 +00:00
Archie Cobbs
807a5caa14 Add ng_mppc(8) netgraph node as a KLD module.
Obtained from:  Whistle source tree
2000-04-09 21:07:39 +00:00
Archie Cobbs
af7ab18437 A netgraph node that implements Microsoft Point-to-Point compression
(MPPC) and Microsoft Point-to-Point encryption (MPPE) protocols.

Note: the MPPC part is disabled as it requires proprietary files.

Obtained from:	Whistle source tree
2000-04-09 21:04:55 +00:00
Archie Cobbs
018204af68 A simplified RC4 implementation for kernel use. 2000-04-09 21:01:01 +00:00
Archie Cobbs
3a83eefb2a Fix bogus const-ness in declaration of sha1_loop(). 2000-04-09 20:10:55 +00:00
Søren Schmidt
4175758a2d Add support for ATA66 on newer revisions of the VIA 82C596 2000-04-09 15:08:27 +00:00
Jordan K. Hubbard
4fbd258bcc Nuke duplicate struct declaration from somebody's paste-o 2000-04-08 22:50:18 +00:00
Warner Losh
d85d39f7d1 Re-enable probe for isa and correct the plug and play issue that
caused this device to be disabled.  It will no longer claim all
devices with PNPBIOS enabled.
2000-04-08 17:23:46 +00:00
Warner Losh
0491a49ae7 Don't complain about not getting resources for the compatibility shim
drivers unless booted -verbose.  This cleans up the boot messages
somewhat as the old messages were confusing and not helpful for most
people.
2000-04-08 17:21:15 +00:00
Warner Losh
9a8631b340 Add support for compiling kernel modules outside of the tree. If you
do not have the kernel you wish to compile against in either
/usr/src/sys or /sys, then you will need to set SYSDIR to point to the
sys directory of the source tree that contians the source.

Also, minor tweaks to the load/unload targets from Bruce.

I've had this through several make worlds, as well as using it on a
daily basis for the past couple of weeks to build modules needed for
testing at Timing Solutions.

Reviewed and revised by: bde
Work sponsored by: Timing Solutions
2000-04-08 17:20:00 +00:00
John Hay
49ce7a6052 Make the N2 isa cards probe again. Remove the unused frame relay hooks.
This should also fix PR 17814 where flags were ignored on the first
usage of ifconfig on the interface.

PR:		17814
2000-04-08 17:14:00 +00:00
Nick Hibma
de9e4dd6e4 Update the urio driver. It now works on NetBSD and OpenBSD as well.
Update the license in the rio_usb.h (now rio500_usb.h) to not be GPL.
Sorry for committing that file in the first place. The change of license
was agreed to by the original author.
2000-04-08 17:02:13 +00:00
Doug Rabson
c0de587901 Use makeobjops.pl instead of makedevops.pl. 2000-04-08 15:31:28 +00:00
Doug Rabson
f7b7769172 * Factor out the object system from new-bus so that it can be used by
non-device code.
* Re-implement the method dispatch to improve efficiency. The new system
  takes about 40ns for a method dispatch on a 300Mhz PII which is only
  10ns slower than a direct function call on the same hardware.

This changes the new-bus ABI slightly so make sure you re-compile any
driver modules which you use.
2000-04-08 14:17:18 +00:00
Paul Saab
d8af287caf Make PXE use the UDP API. This allows for both TFTP and NFS support.
You may specify TFTP or NFS via compile time options in the loader,
but not both at this time.

Also, remove a warning about not knowing how to boot from network
devices.  We can obviously do that now.
2000-04-08 01:22:14 +00:00
Brian Somers
b44dfc0d29 Don't use ``grep | sed'' in the example for INCLUDE_CONFIG_FILE
when sed can do both.
2000-04-08 00:02:53 +00:00
Yoshihiro Takahashi
249253e7a0 Newbusify amd driver.
Some error messages are added by Brian Somers <brian@Awfulhak.org>.
2000-04-07 11:36:11 +00:00
Yoshihiro Takahashi
4b00895121 Newbusify adv driver.
Reviewed by:	imp
2000-04-07 11:32:42 +00:00
Matthew N. Dodd
833d4d91bc Use correct offset into register window.
Noticed by: 	Manfred Antar <mantar@pacbell.net>
2000-04-07 07:29:31 +00:00
Matthew N. Dodd
bfae5e3a16 - Convert dpt_pci.c to newbus.
- Add support for ISA based DPT adapters (this doesn't quite work yet).
- Sync dpt_eisa.c with my local copy.
  - Simplify how EISA IDs are matched.
  - Prototype.
  - Formatting nits.
  - Conform to how I do things in dpt_pci.c/dpt_isa.c.
- Modify dpt_scsi.c:dpt_alloc() to DTRT with newbus.
- Add some comments to dpt_scsi.c:dpt_pio_get_conf().
- Add additional check to dpt_scsi.c:dpt_get_conf().
- Add some useful error messages to dpt_scsi.c:dpt_init().
2000-04-07 02:50:24 +00:00
Jonathan Lemon
9c117130a5 If we can't allocate an IRQ resource, fail in the attach routine. 2000-04-07 00:09:24 +00:00
Ruslan Ermilov
67b333b7e4 - Add support for FTP EPRT (RFC 2428) command.
- Minor optimizations.
- Minor spelling fixes.

PR:		14305
Submitted by:	ume
Rewritten by:	ru
2000-04-06 15:54:52 +00:00
Nick Hibma
cd37c0cba9 Regen. 2000-04-06 10:19:16 +00:00
Nick Hibma
5deaecf7cf Add Zip 250 2000-04-06 10:16:24 +00:00
Peter Wemm
6097b91867 Finally cvs rm these two files; they were not referenced in conf/files*,
and were accumulating history as a result of recursive script processing.
2000-04-06 08:18:30 +00:00
Greg Lehey
409875e46d open_drive: Add kludges for vn and md.
Submitted-by:	dillon (vn)
Requested-by:	phk (md)
2000-04-06 07:25:35 +00:00
Greg Lehey
6165ec2aad (finally!) add keywords raid4 and partition. 2000-04-06 07:13:44 +00:00
Boris Popov
8fc40832d5 Uncomment ETHER_II frame and remove BPF related variable. 2000-04-06 03:09:56 +00:00
Greg Lehey
bd131be7d1 complete_rqe: Remove a race condition in RAID-4 and RAID-5 where a
request could be deallocated before the top half had finished
	issuing it.  The problem seems only to happen with IDE drives
	and vn devices, but theoretically it could happen with any
	drive.  This is the most important part of a possible series
	of fixes designed to remove race conditions without locking
	out interrupts for longer than absolutely necessary.

Reported-by:	       sos
Fix-supplied-by:       dillon
2000-04-06 03:03:31 +00:00
Warner Losh
0d5c223da4 Awi driver, ported from NetBSD from Atsushi Once-san.
From the README:
	Any IEEE 802.11 cards use AMD Am79C930 and Harris (Intersil) Chipset
	with PCnetMobile firmware by AMD.
	   BayStack 650   1Mbps Frequency Hopping PCCARD adapter
	   BayStack 660   2Mbps Direct Sequence PCCARD adapter
	   Icom SL-200    2Mbps Direct Sequence PCCARD adapter
	   Melco WLI-PCM  2Mbps Direct Sequence PCCARD adapter
	   NEL SSMagic    2Mbps Direct Sequence PCCARD adapter
	   Netwave AirSurfer Plus
			  1Mbps Frequency Hopping PCCARD adapter
	   Netwave AirSurfer Pro
			  2Mbps Direct Sequence PCCARD adapter

Known Problems:
	WEP is not supported.
	Does not create IBSS itself.
	Cannot configure the following on FreeBSD:
		selection of infrastructure/adhoc mode
		ESSID
		...

Submitted by: Atsushi Onoe <onoe@sm.sony.co.jp>
2000-04-06 02:48:48 +00:00
Archie Cobbs
b76f24f759 Fix a bug where SIGIO was not being delivered to a process requesting
async I/O when a tty device became writable.

PR:		kern/8324
Submitted by:	Don Lewis <Don.Lewis@tsc.tdk.com>
2000-04-05 18:38:21 +00:00
Ruslan Ermilov
680c8244a9 - Remove unused includes.
- Minor spelling fixes.
- Make IcmpAliasOut2() really work.

Before this change:

# natd -v -n PUB_IFACE -p 12345 -redirect_address 192.168.1.1 P.P.P.P
natd[87923]: Aliasing to A.A.A.A, mtu 1500 bytes
In  [UDP]  [UDP] X.X.X.X:49562 -> P.P.P.P:50000 aliased to
           [UDP] X.X.X.X:49562 -> 192.168.1.1:50000
Out [ICMP] [ICMP] 192.168.1.1 -> X.X.X.X 3(3) aliased to
           [ICMP] A.A.A.A -> X.X.X.X 3(3)

# tcpdump -n -t -i PUB_IFACE host X.X.X.X and "(udp or icmp)"
tcpdump: listening on PUB_IFACE
X.X.X.X.49562 > P.P.P.P.50000: udp 3
A.A.A.A > X.X.X.X: icmp: A.A.A.A udp port 50000 unreachable

After this change:

# natd -v -n PUB_IFACE -p 12345 -redirect_address 192.168.1.1 P.P.P.P
natd[89360]: Aliasing to A.A.A.A, mtu 1500 bytes
In  [UDP]  [UDP] X.X.X.X:49563 -> P.P.P.P:50000 aliased to
           [UDP] X.X.X.X:49563 -> 192.168.1.1:50000
Out [ICMP] [ICMP] 192.168.1.1 -> X.X.X.X 3(3) aliased to
           [ICMP] P.P.P.P -> X.X.X.X 3(3)

# tcpdump -n -t -i PUB_IFACE host X.X.X.X and "(udp or icmp)"
tcpdump: listening on PUB_IFACE
X.X.X.X.49563 > P.P.P.P.50000: udp 3
P.P.P.P > X.X.X.X: icmp: P.P.P.P udp port 50000 unreachable
2000-04-05 14:27:34 +00:00
Ruslan Ermilov
79eef4b611 - Moved NULL definition into private include file.
- Minor spelling fixes.
2000-04-05 14:23:42 +00:00
KATO Takenori
e4197aa9d6 Synced with sys/conf/Makefile.i386 revision 1.181. 2000-04-05 12:54:13 +00:00
Boris Popov
424913b211 Do not panic if request issued by kernel.
Reported by:	Vladimir Poliakov <vnp@mail.kccm.ru>
2000-04-05 10:54:02 +00:00
Boris Popov
0f15f7aba5 Try to obtain timezone offset from an environment of mount program.
This helps in cases where CMOS clock set to UTC time.
2000-04-05 10:44:04 +00:00
Doug Rabson
d7a599a66f Make it possible to include a device interface description by a single
line in files or files.${arch} instead of 13 lines of code.

This is a small chance that this will break the alpha kernel build - I'll
fix it this evening if it does.
2000-04-05 10:33:55 +00:00
Doug Rabson
7fecffec3d Allow the calling Makefile to specify a list of device interfaces instead
of relying on the default list provided here.
2000-04-05 10:13:05 +00:00
Ruslan Ermilov
91cc2995af Minor spelling fixes. 2000-04-05 07:45:39 +00:00
Cameron Grant
7c7f2a4a81 make poll() dtrt, previously when playing it would trigger if there was less
than 1 byte ready to play instead of room for at least 1 byte to be written.
similarly for recording.
2000-04-05 05:54:02 +00:00
Cameron Grant
2d3ce9d56e decrease buffer size to 4k
use a seperate channel for generating irqs so we get a buffer-half-empty
interrupt, prevents repeating on underflow
2000-04-05 02:14:26 +00:00
Cameron Grant
bd18f33408 allow /dev/dsp to be opened seperately for reading and writing. 2000-04-05 01:13:42 +00:00
Cameron Grant
119a24a450 try increasing 2ndbuffer size to 64k 2000-04-05 00:56:02 +00:00
Cameron Grant
8b455f8d05 move buffer size definition to .c file for consistency, and reduce it to 4k 2000-04-05 00:38:00 +00:00
Nick Hibma
9011b59b70 Add automatic rescan on connect. This happens already if the drive is
connected during boot and the vpo module is in the kernel/loaded.

In the case where the module is loaded at some later stage with kldload,
the CAM bus is now rescanned as well.
2000-04-04 22:15:13 +00:00
Mike Smith
e36bc62387 Fix _zget() so that it checks the return from kmem_alloc(), to avoid
zttempting to bzero NULL when the kernel map fills up.  _zget() will
now return NULL as it seems it was originally intended to do.
2000-04-04 21:00:39 +00:00
Roger Hardiman
24cf43ae21 Upgrade the bktr driver from 2.07 to 2.10.
- The driver now uses bus_space() and runs on NetBSD 1.4.2
   Submitted by Thomas Klausner <wiz@danbala.ifoer.tuwien.ac.at>

 - Remove startup quirks for video and vbi capture for PAL users.
   PAL TV users can now run FXTV and Alevt in any order.

 - Add support for cable channels >100
   Submitted by Scott Presnell <srp@zgi.com>

 - New MSP3410/3415 setup code added. This is experimental.
   Please set the sysctl hw.bt848.slow_msp_audio to 1 for this.
   Submitted by Frank Nobis<fn@radio-do.de>
2000-04-04 16:54:13 +00:00
Roger Hardiman
bcc862e397 Add multiple #include protection
Submitted by:	 Thomas Klausner <wiz@danbala.ifoer.tuwien.ac.at>
2000-04-04 16:46:19 +00:00
Hellmuth Michaelis
afb8931fa8 Remove obsolete reference to PCVT_FREEBSD. 2000-04-04 13:14:43 +00:00
Gary Jennejohn
27173c13e8 Pass me the pointy hat.
It was not a good idea to remove csu_header from struct cspace, it had
ramifications which I didn't notice.

Restore src/usr.sbin/ppp/slcompress.h to the way it was, since MAX_HDR
was already defined as 128 there and it's a user program anyway.

In sys/net/slcompress.h make MAX_HDR 128 intead of MLEN to avoid
bloat.

My apologies for any inconvenience.
2000-04-04 09:20:53 +00:00
Doug Rabson
2e215a3dcc Allow MAXDEP dependants, not MAXDEP-1. 2000-04-04 07:48:04 +00:00
Paul Saab
dbe3e0f575 Add a missing PXE API call and structure. 2000-04-04 07:28:54 +00:00
Duncan Barclay
4b02e51324 Fix mbuf leaking - duh! 2000-04-04 06:43:30 +00:00
Warner Losh
1b23908082 Fix pcic_detach_socket to get right pcic_handle.
Pass sc->dev rather than a bogusly cast pccard_softc *sc.

This allows us to insert and remove cards w/o panicing the kernel.
However, the cis isn't mapped in, so the pccard_scan_cis function
fails.
2000-04-04 04:12:43 +00:00
Warner Losh
0d1337c6fa Be consistant about using the right child to get the ivars, which is
the pcic_handle structure for the socket.
2000-04-04 03:47:51 +00:00
Cameron Grant
fe9aab21ea enable emu10k1 (sblive) driver, though still playback only 2000-04-04 02:34:45 +00:00
Cameron Grant
97b3c9d804 make the click on starting output go away 2000-04-04 02:16:15 +00:00
Paul Saab
2efc827d19 Add all the PXE related structures from the 2.1 PXE spec from Intel.
Fix exsisting code to match the spec.
2000-04-04 00:38:59 +00:00
Nick Hibma
16fd39fc59 Dereference a pointer (print int instead of pointer value) 2000-04-03 22:28:13 +00:00
Nick Hibma
673ef6fe3a Numerous fixes brought in by Lennart Augustsson from NetBSD:
- Request the maximum number of LUNs on a device if it is
  a Bulk-Only device.

- Handle NO_TEST_UNIT_READY case for SCSI

- Add NO_START_STOP quirk for LS-120

- Fix a KASSERT which was the wrong way around.

- Kickstart the LS-120 with the infamous LS-120 specific command of
  which no one knows what it doesn, apart from the fact that it appeared
  in the Linux code someday.
2000-04-03 22:19:44 +00:00
Nick Hibma
cdb51d12a6 OpenBSD has a broken debugger that does not grok static. Use a
#define Static  static

that the OpenBSD folks can define it to be empty if they like.
2000-04-03 20:58:30 +00:00
Gary Jennejohn
8810489433 Nuke csu_hdr from struct cspace. csu_hdr is not used anywhere in the
tree. This considerably reduces unnecessary bloat in struct slcompress.

I'm running with this change right now and have seen no negative
side-effects.

On my sytem this reduced kernel BSS by about 25KB.

Submitted by:	bde
Approved by:	brian for user-ppp
2000-04-03 19:54:33 +00:00
Nick Hibma
329cac9cb7 Regen. 2000-04-03 15:15:50 +00:00
Nick Hibma
3a8acc3059 Add Freecom + product; Update NetBSD's copyright 2000-04-03 14:47:43 +00:00
Nick Hibma
540d9130cc Add a hack to cam that makes the cam_xpt available to the rest of the
kernel. Justin agress that there is no other reasonable alternative to
do automatic rescans on connect.

The problem is that when a new device attaches to a SIM (SCSI host
controller) we need to send a XPT_SCAN_BUS command to the SIM using
xpt_action. This requires however that there is a peripheral available
to take the command (otherwise xpt_done and later bomb). The RESCAN
ioctl uses the same periph.

This enables a USB mass storage drive to do an automatic rescan on
connection of the drive.

The automatic dropping of a CAM entry on disconnection was already
working (asynchronous event).

The next thing to do is find someone to commit a change to vpo to do the
same thing. Just port umass_cam_rescan and friends across to that
driver.

Approved by:   gibbs
2000-04-03 11:11:12 +00:00
Poul-Henning Kamp
296f1f066e Silence some warnings. 2000-04-03 10:09:18 +00:00
Kazutaka YOKOTA
c2c86c2b88 Unbreak LINT. 2000-04-03 09:24:16 +00:00
Alfred Perlstein
6288517674 regenerate with MPSAFE from syscalls.master 2000-04-03 06:36:57 +00:00
Alfred Perlstein
c01df63183 Make makesyscalls.sh parse an optional field 'MPSAFE' that specifies
that a syscall does not want the BGL to be grabbed automatically.

Add the new MPSAFE flag to the syscalls that dillon has determined to
be MPSAFE.
2000-04-03 06:36:14 +00:00
Mike Smith
48bb080006 Remove the !(I386 & SMP) tests; we don't run SMP on an i386 system, and
they break the LINT build.
2000-04-03 06:02:00 +00:00
Cameron Grant
8046c76306 fix missing defines and prototype for emu_vdump() 2000-04-03 00:28:43 +00:00
Nick Hibma
3768ac3452 Sync with NetBSD: Add a few id's and correct numerous typo's 2000-04-03 00:07:43 +00:00
Nick Hibma
c7de838d37 Sync with NetBSD: Keep the bit position even when the report descriptor says POP. 2000-04-02 23:15:08 +00:00
Nick Hibma
526e193e18 Shoot. Did a compile in the wrong directory and missed this compiler
error.

Could someone pass me the pointy hat, please?
2000-04-02 22:04:18 +00:00
Nick Hibma
767fd36c73 Remove a static variable, a uniquifier for a SCSI command. It might have
produced inadvertently failed transfers in the case were multiple
Bulk-Only devices are connected and a command is prepared at the same
time.
2000-04-02 21:59:27 +00:00
Brian Somers
3e6ac25bd6 Correct Charles Mott's email address
Requested by: Charles Mott <cmott@scientech.com>
2000-04-02 20:16:45 +00:00
Poul-Henning Kamp
282ac69ede Clone bio versions of certain bits of infrastructure:
devstat_end_transaction_bio()
        bioq_* versions of bufq_* incl bioqdisksort()
the corresponding "buf" versions will disappear when no longer used.

Move b_offset, b_data and b_bcount to struct bio.

Add BIO_FORMAT as a hack for fd.c etc.

We are now largely ready to start converting drivers to use struct
bio instead of struct buf.
2000-04-02 19:08:05 +00:00
Matthew Dillon
7c8fdcbd19 Make the sigprocmask() and geteuid() system calls MP SAFE. Expand
commentary for copyin/copyout to indicate that they are MP SAFE as
    well.

Reviewed by: msmith
2000-04-02 17:52:43 +00:00
Nick Hibma
b5cf22188d I got the CAM numbers (path id's, buses, unit numbers) and newbus
unit numbers all wrong. This did not show up because most of them where
zero anyway.

Use a separate buffer for command transforms instead of fiddling with
the existing cdb_bytes.

Take CAM_CDB_POINTER into account. Nobody is using it, but someone might
in the future.

Be more picky about what to accept in the UFI command set.

First attempt at implementing the ATAPI command protocol transforms.
This should at least make Imation Superdisk and other e-Shuttle based
devices show as attached. Maybe they even work to some extent.
2000-04-02 16:59:16 +00:00
Yoshinobu Inoue
fc8970f1c2 Print out more hints at illegal cksum len value. 2000-04-02 16:23:16 +00:00
Yoshinobu Inoue
7cba257ae5 Move htons() ip_len to after the in_delayed_cksum() call.
This should stop cksum error messages on IPsec communication
which was reported on freebsd-current.

Reviewed by: jlemon
2000-04-02 16:18:26 +00:00
Poul-Henning Kamp
c244d2de43 Move B_ERROR flag to b_ioflags and call it BIO_ERROR.
(Much of this done by script)

Move B_ORDERED flag to b_ioflags and call it BIO_ORDERED.

Move b_pblkno and b_iodone_chain to struct bio while we transition, they
will be obsoleted once bio structs chain/stack.

Add bio_queue field for struct bio aware disksort.

Address a lot of stylistic issues brought up by bde.
2000-04-02 15:24:56 +00:00
Jonathan M. Bresler
4c9805fafa Add support for the LinkSys USB10T network adapter that
contains the ADMtek Pegasus AN986 USB chipset.  The
	adapter supports both 10BaseT and 100BaseT (including
	full-duplex).  The product code for these adapters is
	0x2206.
2000-04-02 12:43:34 +00:00
Gerard Roudier
45b318264e This new driver version uses the DMA mapping interface
introduced in FreeBSD-4.0. The driver is now full up-to-date
with regards to the current kernel interfaces.

Another significant change in this driver version applies
to the checking of the data direction. The driver is now
able to check against the expected data direction in any
circumstance and will not hang either if direction is wrong
at the start of the IO, or if for some weird reason,
the device changes to the wrong direction during the IO.

This driver version is still usable under FreeBSD 3.2/3.3,
since it only requires CAM, other kernel interface dependencies
being #if'ed in the sources according to kernel version.
But, in order to use the driver under those early kernel
versions, user has to move the driver sources by hand and make
appropriate tiny changes to let the kernel know about the driver.

Other changes:
- Remove the debugging stuff for WSR bit.
- Get rid of some warnings about volatile being discarded.
2000-04-02 10:07:54 +00:00
Poul-Henning Kamp
8c125869a9 Draw the outline of "struct bio".
Struct bio is the future carrier of I/O requests for "struct buf".
2000-04-02 09:26:51 +00:00
Kazutaka YOKOTA
d0a99324a3 - Add temporary workaround to fool some "clever" KVM switch products
which think they know the IntelliMouse 4-byte packet and believe,
  wrongly, that any other protocols use 3-byte packets.
- Update a couple of comment lines for A4 Tech mice.
2000-04-02 08:28:21 +00:00
Kenneth D. Merry
a68fce35ea Fix two problems in the ch(4) driver.
- Mike Smith discovered a panic in the changer probe code if the probe
  command (mode sense) fails.  So we need to release the CCB used in the
  probe before we unlock the peripheral.  (i.e. the same fix mjacob put in
  the CD and DA drivers)

- A newline was missing in a warning message.  (PR kern/17512)

PR:		kern/17512
Submitted by:	Louis Mamakos <louie@uu.net> (newline fix)
2000-04-02 07:49:09 +00:00
Cameron Grant
c067afaa06 unfinished sblive driver, playback/mixer only for now - not enabled in
conf/files

i don't seem to be clearing the cache right resulting in a short initial
burst of noise, despite doing the same as creative and alsa.  i'm committing
now so more eyes can pore over the code.
2000-04-02 07:41:17 +00:00
Brian Feldman
f0cf8dfe0e One in a while, something happens so uncannily that you get knocked off
your feet.  The conversion of the "snp" device to a dynamically growing
device driver was done just a few days ago by Brooks Davis!  Shame on
me for not finding that PR :(

This is a forced commit of tty_snoop.c to give the submitter proper credit,
as most of the patch submitted is actually exactly the same code (by some
large amount of entropy).  Brooks also submitted the change to LINT to
set the example of "snp" usage to not include a number, as that number is
now deprecated, so that is also in this commit.

PR:		17629
Submitted by:	Brooks Davis <brooks@one-eyed-alien.net>
2000-04-02 07:02:48 +00:00
Jonathan M. Bresler
0fe00f48d0 if USB support is not compiled into the kernel,
and has not been loaded via a kldload,
	running usbd(8) will autoload the "usb.ko" kld.

	thanks to Peter Wemm for enlightening me on the
	differences between kldfind(2) and modfind(2).
2000-04-02 06:28:40 +00:00
Paul Saab
75daea9395 Try and make the kernel build again without INET6. 2000-04-02 03:49:25 +00:00
Matthew Dillon
e4649cfac3 Change the write-behind code to take more care when starting
async I/O's.  The sequential read heuristic has been extended to
    cover writes as well.  We continue to call cluster_write() normally,
    thus blocks in the file will still be reallocated for large (but still
    random) I/O's, but I/O will only be initiated for truely sequential
    writes.

    This solves a number of annoying situations, especially with DBM (hash
    method) writes, and also has the side effect of fixing a number of
    (stupid) benchmarks.

Reviewed-by: mckusick
2000-04-02 00:55:28 +00:00
Brian Feldman
76e90dbcc9 Unstaticize this driver. You can have as many snoop devices as you can
mknod :)

Clean things up a lot while I'm here.  A lot of KNF changes.
2000-04-02 00:35:37 +00:00
Yoshinobu Inoue
fdaf052eb3 Support per socket based IPv4 mapped IPv6 addr enable/disable control.
Submitted by: ume
2000-04-01 22:35:47 +00:00
Cameron Grant
e620d95952 fail in attach if we seem to have no ac97 codec 2000-04-01 22:24:03 +00:00
Cameron Grant
0a3eb835c2 bump the buffer size from 4k to 16k. should improve performance under load. 2000-04-01 21:28:09 +00:00
Jonathan Lemon
ea53ecd9d4 Calculate any delayed checksums before handing an mbuf off to a
divert socket.  This fixes a problem with ppp/natd.

Reviewed by:	bsd	(Brian Dean, gotta love that login name)
2000-04-01 18:51:03 +00:00
KATO Takenori
769e7115b7 Merged from sys/isa/sio.c revisions 1.293 and 1.294. 2000-04-01 11:27:31 +00:00
KATO Takenori
25ae42ba62 Merged from sys/conf/options.i386 rev 1.134. 2000-04-01 11:10:04 +00:00
Warner Losh
b6f6dacdd3 Add support for pci modems. ONLY CONTROLLER BASED MODEMS. This
doesn't support winmodems, softmodems, hcf or any other modem that
relies on the host to do any sort of soft control for any aspect of
the modem's function.  There are two modems known to work:
	3COM FaxModem PCI.
	ActionTec 56k VoiceMessaging PCI Modem
and the following modem might work
	Multitech PCI FaxModem	(not sure about this)
and the serial pci cards might work too.  I have neither these
hardware items so I can't add support for them.
2000-04-01 06:14:21 +00:00
Warner Losh
ce73953a1e device_set_unit() DO NOT USE THIS. This was approved before 4.0
release for inclusion into the release, but bde talked me out of
committing the module that needs this until after the release.  It is
after the release now. :-)
2000-04-01 06:06:37 +00:00
Mike Smith
78601fc5f8 Update to latest working version.
- Add periodic status monitoring routine.  Currently just detects
   lost commands, further functionality pending data from AMI.
   Add some new commands states; WEDGED (never coming back) and
   LATE (for when a command that wasmarked as WEDGED comes bacj,

 - Remove a number of redundant efforts to poll the card for completed
   commands.  This is what interrupt handlers are for.

 - Limit the maximum number of outstanding I/O transactions.  It seems
   that some controllers report more than they can really handle,
   and exceding this limit can cause the controller to lock up.

 - Don't use 'wait' mode for anything where the controller might not
   be able to generate interrupts.  (Keep the 'wait' mode though sa it
   will become useful when we start taking userspace commands.

 - Use a similar atomic locking trategy to the Mylex driver to prevent
   some reentrancy problems.

 - Correctly calculate the block count for non-whoile-bloch transfers
   (actually illegal).

 - Use the dsik device's si_drv1 field instead of b_driver1 in the
   buf struct to pass the driver identifier arond.

 - Rewrite amr_start and amr_done() along the lines of the Mylex driver
   in order to improve robustnes.

 - Always force the PCI busmaster bit on.
2000-04-01 00:35:15 +00:00
Brian Somers
5dd44916b7 Allow PacketAliasSetTarget() to be passed the following:
INADDR_NONE:   Incoming packets go to the alias address (the default)
  INADDR_ANY:    Incoming packets are not NAT'd (direct access to the
                 internal network from outside)
  anything else: Incoming packets go to the specified address

Change a few inaddr::s_addr == 0 to inaddr::s_addr == INADDR_ANY
while I'm there.
2000-03-31 20:36:29 +00:00
Duncan Barclay
22962767d5 Add signal strength cache structures. 2000-03-31 20:13:03 +00:00
Duncan Barclay
5d42d35e02 Use the right value for IFQ_MAXLEN and fix brokeness with gatewaying http from windows.
Add signal strength cache and antenna selection (untested as firmware v4 doesn't return the antenna).

KNF
2000-03-31 20:12:30 +00:00
Doug Rabson
ca403ff820 Don't use too-large stack buffers.
Submitted by: Nikolai Saoukh <nms@otdel-1.org>
2000-03-31 19:35:41 +00:00
Kazutaka YOKOTA
091323598f - Fix SC_ALT_MOUSE_IMAGE; don't blink the mouse cursor.
- Fix non-destructive, underline text cursor.
2000-03-31 16:05:46 +00:00
KATO Takenori
c1cdadfffe Synced with following files:
src/sys/boot/i386/Makefile.inc	1.1
  src/sys/boot/i386/btx/btx/btx.s	1.15
  src/sys/boot/i386/btx/btxldr/Makefile	1.8
  src/sys/boot/i386/btx/btxldr/btxldr.s	1.9
  src/sys/boot/i386/libi386/biosdisk.c	1.29
  src/sys/boot/i386/loader/Makefile	1.42
  src/sys/boot/i386/loader/main.c	1.18
(entry point address of loader was not changed.)

Reviewed by:	nyan
2000-03-31 16:03:02 +00:00
Brian Somers
1c4e6d2544 When an incoming packet is received that is not specifically
redirected and when no target address has been specified, NAT
the destination address to the alias address rather than
allowing people direct access to your internal network from
outside.
2000-03-31 14:03:37 +00:00
Hellmuth Michaelis
a06da08313 Oops, PCVT_FREEBSD is useless too. Add new PCVT_GREENSAVER option. 2000-03-31 09:05:19 +00:00
Hellmuth Michaelis
aae85521f6 Remove useless PCVT_FREEBSD and PCVT_EMU_MOUSE. Add PCVT_GREENSAVER. 2000-03-31 09:02:39 +00:00
Hellmuth Michaelis
7ec3d24bf1 remove useless PCVT_EMU_MOUSE option. 2000-03-31 08:58:50 +00:00
Hellmuth Michaelis
1f72235090 Add support for "green" saver mode. 2000-03-31 08:29:21 +00:00
Hellmuth Michaelis
e1916ce25d PR: kern/2327
Submitted by: Brian Campbell (brianc@netrover.com)

Add a "green" saver mode to pcvt.
2000-03-31 08:28:18 +00:00
Doug Rabson
acd3131b4b Fixes to parse more complex ISA PnP configurations.
Submitted by: Nikolai Saoukh <nms@Brigada-A.Ethereal.RU>
PR:	      kern/17219
2000-03-31 07:12:12 +00:00
Peter Wemm
39f1e703ec Recognize USR3050 "U.S. Robotics 56K FAX INT" fax modem.
PR:		17702
Submitted by:	Scot W. Hetzel <hetzels@westbend.net>
2000-03-31 07:09:08 +00:00
Doug Rabson
1f1624dcee Fix PnP memory range calculations.
Submitted by: Nikolai Saoukh <nms@Brigada-A.Ethereal.RU>
PR:	      kern/16712
2000-03-31 07:07:51 +00:00
Bill Fumerola
df38713c24 Avoid dividing by zero when beeping with a zero pitch. This was bad.
PR:		alpha/17637
Submitted by:	Bosko Milekic <bmilekic@dsuper.net>
Reported by:	Dennis Lindroos <lindroos@nls.fi>
2000-03-30 22:39:48 +00:00
Mitsuru IWASAKI
2058e7f3e0 Fix typo in description of Cirrus Logic PD6832 PCI-CardBus Bridge.
This don't hurt anything.
	PCI/CardBus Bridge -> PCI-CardBus Bridge

Submitted by:	Takeshi Shibagaki <sibagaki@lsi.melco.co.jp>
Obtained from:	bsd-nomads ML in Japan
2000-03-30 18:47:00 +00:00
Peter Wemm
a84e0a1cfe Remove #ifdef for sem_wakeup() - we just use wakeup(). 2000-03-30 11:35:25 +00:00
KATO Takenori
fdf884ea55 Separated serial boot block interface routine into NS16550 stuff and
i8251 stuff.
2000-03-30 09:25:03 +00:00
Peter Wemm
ad88c63413 Move linprocfs to the i386-only section so the Alpha buildworld has a
chance at finishing..
2000-03-30 08:04:01 +00:00
Peter Wemm
255108f385 Make sysv-style shared memory tuneable params fully runtime adjustable
via sysctl.  It's done pretty simply but it should be quite adequate.
Also move SHMMAXPGS from $machine/include/vmparam.h as the comments that
went with it were wrong... we don't allocate KVM space for the pages so
that comment is bogus..  The only practical limit is how much physical
ram you want to lock up as this stuff isn't paged out or swap backed.
2000-03-30 07:17:05 +00:00
Peter Wemm
27361f297c Try and make the Alpha kernel compile. There are still some loose ends
(eg: common declarations in includes that I think are causing gensetdefs
 warnings) that need to be tied up, but it compiles and runs.
2000-03-30 06:44:50 +00:00
Warner Losh
fd6715ee6a Oldconfig cs driver. Obsoleted by newbus driver in sys/dev/cs.
Implicitly submitted by: max@rsu.ru
2000-03-30 05:19:38 +00:00
Warner Losh
5664bf9cea NewBus the cs driver.
Submitted by: max@rsu.ru
2000-03-30 05:16:16 +00:00
Jonathan Lemon
20c822f399 If `ipfw fwd' loops an mbuf back to ip_input from ip_output and the
mbuf is marked for delayed checksums, then additionally mark the
packet as having it's checksums computed.  This allows us to bypass
computing/checking the checksum entirely, which isn't really needeed
as the packet has never hit the wire.

Reviewed by:		green
2000-03-30 02:16:40 +00:00
Peter Wemm
2af66d23ef Include param.o in the list of files that we scan for linker sets.
Without this, we cannot put sysctl nodes in there.
2000-03-29 23:20:35 +00:00
Bill Paul
7cfa339426 Two fixes for the RealTek:
- Only call m_pullup() when necessary.

- Check return value from rl_encap() in rl_start() to avoid panic when
  we run out of mbufs. (Fixes PR kern/17582)

PR:		kern/17582
2000-03-29 20:06:15 +00:00
Bill Paul
c57afb7f7e Regenerate. 2000-03-29 19:46:41 +00:00
Bill Paul
554d5470ef Add vendor/product ID for two more KLSI-based devices, including a
USB ethernet adapter being handed out by @Home.
2000-03-29 19:44:48 +00:00
Julian Elischer
bf7c9470c1 Slight cleanup of aarp code
Submitted by: Ian Dowse <iedowse@maths.tcd.ie>
PR: kern/17583

This PR is still open as Ther is still ongoing investigation.
2000-03-29 17:12:09 +00:00
Masahide MAEKAWA
de06b995e0 Regen. 2000-03-29 15:08:02 +00:00
Masahide MAEKAWA
c4fdea33fb Add ID (Keisokugiken Corp. HKS-0200 USBDAQ) 2000-03-29 15:07:20 +00:00
Yoshihiro Takahashi
239fe111cd - Added PC-98 Cbus frontend.
- Move dev/aic/aic_isa.c entry from conf/files to conf/files.MACHINE
   because PC-98 uses different file.

Submitted by:	nyan and IMAI Takeshi <take-i@ceres.dti.ne.jp>
2000-03-29 14:32:34 +00:00
Yoshihiro Takahashi
3de3db30db Newbusify mse driver. 2000-03-29 14:23:16 +00:00
KATO Takenori
61b64fdb1e PC-98 BIOS copies the DX register into its work area. The value of it
shows `CPUID' and it is useful to identify CPU.  So, it is copied from
BIOS work area to the cpu_id variable (PC-98 only).

Submitted by:	chi@bd.mbn.or.jp (Chiharu Shibata)
2000-03-29 13:45:40 +00:00
KATO Takenori
af5d822f28 Commented out apm0. It could cause hang-up. 2000-03-29 13:39:15 +00:00
KATO Takenori
f984cb1883 Ratoc REX-9880/83 support (PC-98 only). This commit added functions
fe_read_eeprom_rex() and fe_init_rex().  These functions should be
useful for REX-5580 series (for PC-AT).  But they are included in
`#ifdef PC98' to avoid warnings by unused static functions.  If you
try to support REX-5580, please be aware of these functions.

Submitted by:	chi@bd.mbn.or.jp (Chiharu Shibata)
2000-03-29 12:44:19 +00:00
Yoshihiro Takahashi
6566129694 - Supported display suspended mode.
- Switch on/off not only text screen but also graphic screen.

Submitted by:	chi@bd.mbn.or.jp (Chiharu Shibata)
2000-03-29 12:29:27 +00:00
Yoshihiro Takahashi
8b838a7ac2 Merge from the following changes.
File				Revision
sys/conf/files.i386		1.303 and 1.304
sys/dev/kbd/atkbd.c		1.23
sys/dev/syscons/scterm-sc.c	1.2
sys/dev/syscons/scvgarndr.c	1.5
sys/dev/syscons/scvtb.c		1.5
sys/dev/syscons/syscons.c	1.335
sys/isa/syscons_isa.c		1.11
sys/isa/vga_isa.c		1.17
2000-03-29 12:26:41 +00:00
Matthew Dillon
7da240d003 This should fix the lockups people have been experiencing. I muffed up
giving astpending two flag bits.  A cmpl $0 had to turn into a bit test.

Many thanks to: Alain Thivillon <Alain.Thivillon@hsc.fr>
2000-03-29 09:07:47 +00:00
Joerg Wunsch
f72d9d83f5 Peter Johnson found another log() call without a trailing newline.
All three of them have been introduced in rev 1.64, so i guess i've
got all of them now. :)

Submitted by:	Peter Johnson <locke@mcs.net>
2000-03-29 07:50:39 +00:00
Chris Piazza
7e1e216acf Add NVidia GeForce 2 and Quadro 2
Ids and names were taken from nv4_disp.inf in the latest windows drivers.
2000-03-29 06:49:25 +00:00
Matthew Dillon
bd5caafc4d The SMP cleanup commit broke need_resched, this fixes that and also
removed unncessary MPLOCKED and 'lock' prefixes from the interrupt
    nesting level, since (A) the MP lock is held at the time, and (B) since
    the neting level is restored prior to return any interrupted code
    will see a consistent value.
2000-03-29 06:15:43 +00:00
Jonathan Lemon
863bdc0cff Change the mbuf size from 128 -> 256. Increasing the mbuf header size
caused some headers not to fit in MHLEN any more.  This matches the
current size on the alpha, so it shouldn't cause problems.

Problem observed by:	   Geoff Rehmet <geoff@is.co.za>
Originally suggested by:   shin
2000-03-29 05:39:04 +00:00
KATO Takenori
91cb959ddb Added indirect pio into the bus space stuff for the NEC PC-98. bus.h
includes one of bus_at386.h and bus_pc98.h. Becuase only bus_pc98.h
supports indirect pio and bus_at386.h is identical to old bus.h, there
is no functional change in PC-AT's kernels.  That is, it cannot cause
performance loss.

Submitted by:	nyan
Reviewed by:	imp
bde and luoqi provided useful comments for earlier version.
2000-03-29 03:15:22 +00:00
Joerg Wunsch
e44d62832c Added two missing newlines in calls to log(9).
Reported in Usenet by: locke@mcs.net (Peter Johnson)

While i was at it, prepended a 0x to the %D output, to make it clear that
the printed value is in hex (i assume %D has been chosen over %#x to
obey network byte order).
2000-03-28 21:14:35 +00:00
Nick Hibma
1cd27266f4 Remove some cruft 2000-03-28 19:07:37 +00:00
Cameron Grant
57376530f0 split up ess and sb code
rewrite ess mixer to use native registers
rewrite play/rec code to use more accurate timer when available
add code to use audio2 for playback, but disable it as no irqs are generated
2000-03-28 18:31:01 +00:00
Matthew Dillon
db6a426158 The SMP cleanup commit broke UP compiles. Make UP compiles work again. 2000-03-28 18:06:49 +00:00
Nick Hibma
a0e14f58d9 Revert to a static value for the timeout. The timeout was supposedly
to be based on the transfer speed, but I got it all wrong. The by far
biggest factor in the timeout is the start of a removable device, which
is about 2 seconds anyway.

Prodded by: Lennart Augustsson
2000-03-28 17:38:00 +00:00
KATO Takenori
a729b39d7c Merged from sys/isa/fd.c revision 1.180. 2000-03-28 15:09:13 +00:00
KATO Takenori
ab067f0297 Merged from sys/i386/i386/userconfig.c revision 1.179. 2000-03-28 15:07:28 +00:00
KATO Takenori
d46a1af4b6 Merged from sys/i386/i386/machdep.c revision 1.387. 2000-03-28 15:04:29 +00:00
Hellmuth Michaelis
f4fbd51a87 pcvt cleanup.
after cleaning up pcvt_ioctl.h (and ispcvt) adjust kernel part
again to get everything in sync again (name, minor release no.
and major release no.)
2000-03-28 09:32:29 +00:00
Hellmuth Michaelis
a14dea64c1 pcvt cleanup.
remove obsolete stuff resulting from the pcvt kernel part cleanup.
2000-03-28 09:29:50 +00:00
Matthew Dillon
36e9f877df Commit major SMP cleanups and move the BGL (big giant lock) in the
syscall path inward.  A system call may select whether it needs the MP
    lock or not (the default being that it does need it).

    A great deal of conditional SMP code for various deadended experiments
    has been removed.  'cil' and 'cml' have been removed entirely, and the
    locking around the cpl has been removed.  The conditional
    separately-locked fast-interrupt code has been removed, meaning that
    interrupts must hold the CPL now (but they pretty much had to anyway).
    Another reason for doing this is that the original separate-lock for
    interrupts just doesn't apply to the interrupt thread mechanism being
    contemplated.

    Modifications to the cpl may now ONLY occur while holding the MP
    lock.  For example, if an otherwise MP safe syscall needs to mess with
    the cpl, it must hold the MP lock for the duration and must (as usual)
    save/restore the cpl in a nested fashion.

    This is precursor work for the real meat coming later: avoiding having
    to hold the MP lock for common syscalls and I/O's and interrupt threads.
    It is expected that the spl mechanisms and new interrupt threading
    mechanisms will be able to run in tandem, allowing a slow piecemeal
    transition to occur.

    This patch should result in a moderate performance improvement due to
    the considerable amount of code that has been removed from the critical
    path, especially the simplification of the spl*() calls.  The real
    performance gains will come later.

Approved by: jkh
Reviewed by: current, bde (exception.s)
Some work taken from: luoqi's patch
2000-03-28 07:16:37 +00:00
David Greenman
e9bf2fa7b3 Added support for cards and on-motherboard NICs that use an SEEPROM
address size that is different than the standard 6bits. This fixes
support for the Compaq NC3121 card, certain newer Intel Pro/100+
cards, and should also fix integrated NICs on SuperMicro and Compaq
motherboards.
The auto-sizing algorithm was taken from NetBSD (thanks!), which I
think got it from Linux originally.
Thanks also to Andrew Sparrow <spadger@best.com> and Joe Moore
<jomor@ahpcns.com> for supplying me with unworking Compaq and Intel
cards to develop and test the fixes with.
2000-03-28 04:41:42 +00:00
John Baldwin
48a0c4ea04 Mega i386 loader commit.
- Don't hard code 0x10000 as the entry point for the loader.  Instead add
  src/sys/boot/i386/Makefile.inc which defines a make variable with the
  entry point for the loader.  Move the loader's entry point up to
  0x20000, which makes PXE happy.
- Don't try to use cpp to parse btxldr for the optional BTXLDR_VERBOSE,
  instead use m4 to achieve this.  Also, add a BTXLDR_VERBOSE knob in the
  btxldr Makefile to turn this option on.
- Redo parts of cdldr's Makefile so that it now builds and installs cdboot
  instead of having i386/loader/Makefile do that.  Also, add in some more
  variables to make the pxeldr Makefile almost identical and thus to ease
  maintainability.
- Teach cdldr about the a.out format.  Cdldr now parsers the a.out header
  of the loader binary and relocates it based on that.  The entry point of
  the loader no longer has to be hardcoded into cdldr.  Also, the boot
  info table from mkisofs is no longer required to get a useful cdboot.
- Update the lsdev function for BIOS disks to parse other file systems
  (such as DOS FAT) that we currently support.  This is still buggy as
  it assumes that a floppy with a DOS boot sector actually has a MBR and
  parses it as such.  I'll be fixing this in the future.
- The biggie:  Add in support for booting off of PXE-enabled network
  adapters.  Currently, we use the TFTP API provided by the PXE BIOS.
  Eventually we will switch to using the low-level NIC driver thus
  allowing both TFTP and NFS to be used, but for now it's just TFTP.

Submitted by:	ps, alfred
Testing by:	Benno Rice <benno@netizen.com.au>
2000-03-28 01:19:53 +00:00
Matthew Dillon
8d1b3828fa Add a sysctl to specify the amount of UDP receive space NFS should
reserve, in maximal NFS packets.  Originally only 2 packets worth of
    space was reserved.  The default is now 4, which appears to greatly
    improve performance for slow to mid-speed machines on gigabit networks.

    Add documentation and correct some prior documentation.

Problem Researched by: Andrew Gallatin <gallatin@cs.duke.edu>
Approved by: jkh
2000-03-27 21:38:35 +00:00
Matthew Dillon
25db2c5417 Add necessary spl protection for swapper. The problem was located by
Alfred while testing his SPLASSERT stuff.   This is not a complete fix,
    more protections are probably needed.
2000-03-27 21:33:32 +00:00
Matthew Dillon
7c58e473f5 Commit the buffer cache cleanup patch to 4.x and 5.x. This patch fixes a
fragmentation problem due to geteblk() reserving too much space for the
    buffer and imposes a larger granularity (16K) on KVA reservations for
    the buffer cache to avoid fragmentation issues.  The buffer cache size
    calculations have been redone to simplify them (fewer defines, better
    comments, less chance of running out of KVA).

    The geteblk() fix solves a performance problem that DG was able reproduce.

    This patch does not completely fix the KVA fragmentation problems, but
    it goes a long way

Mostly Reviewed by: bde and others
Approved by: jkh
2000-03-27 21:29:33 +00:00
Philippe Charnier
5929bcfaba Revert spelling mistake I made in the previous commit
Requested by: Alan and Bruce
2000-03-27 20:41:17 +00:00
Warner Losh
d0d3b8345b Ahhrggg. Put the test for the compat shims AFTER the file that includes
them.

Pointed out by: bde
2000-03-27 20:24:02 +00:00
Poul-Henning Kamp
b9d308bed2 Allow reuse of hooks.
Remove debugging printfs.
Now compatible with ports/net/mpd-netgraph
2000-03-27 20:05:04 +00:00
Warner Losh
2b2ca8019f This file is obsolete, having long since been copied to sys/dev/adw/adw_pci.c
Pointed out by: gibbs
2000-03-27 19:57:40 +00:00
Jonathan Lemon
db4f9cc703 Add support for offloading IP/TCP/UDP checksums to NIC hardware which
supports them.
2000-03-27 19:14:27 +00:00
Warner Losh
76fbc068b8 Per conversations in -current, add #error to these drivers when you don't
have the right compatibility shims enabled.  ISA drivers to follow later.
2000-03-27 18:32:45 +00:00
Matt Jacob
8e3a167c1d It's the parent that is a CPU node- not GBus itself. 2000-03-27 08:22:23 +00:00
Matt Jacob
4cf46078d1 complain when you do not create a TLSB node 2000-03-27 08:20:44 +00:00
Larry Lile
ba5d95967f o Get basic if_media support working.
o Add more diagnostic and status messages.

o General clean up of old debug messages and
  small style fixes.
2000-03-26 23:56:15 +00:00
Alfred Perlstein
4bb4aee894 repair half-Danish b.b_iocmd damage where writes/reads weren't getting
set properly in the struct buf with vinum:

  Fix locations where B_READ was cleared in the old code but
    b.b_iocmd wasn't set to BIO_WRITE
  Fix propogation of b_iocmd
  Correct comments to reflect reality
  Don't compare b_flags with BIO_READ, it's in b_iocmd.

Submitted by: Bernd Walter <ticso@cicely.de>
2000-03-26 23:06:12 +00:00
Philippe Charnier
46a32e616a Remove duplicate word 2000-03-26 15:24:53 +00:00
Philippe Charnier
956f31353c Spelling 2000-03-26 15:20:23 +00:00
Søren Schmidt
eae50c69b3 Correct a mishap in phk's BIO_* changes. 2000-03-26 12:01:27 +00:00
Alfred Perlstein
fe3f12377c rqe->b.b_flags |= B_READ; became
rqe->b.b_iocmd == BIO_READ instead of
rqe->b.b_iocmd = BIO_READ;
fix it.
2000-03-26 09:20:33 +00:00
Hellmuth Michaelis
191293e031 Substantially cleanup of the pcvt kernel part. This cleanup does
not introduce (hopefully) any functional changes but gets rid of
the #ifdef spaghetti pcvt suffered from more and more over the
years.

Several no more used parts of the source were removed, others
which are used by default are now non-optional components:

PCVT_NETBSD		removed completety
PCVT_FREEBSD		removed option, code is now standard
PCVT_KBD_FIFO		removed option, code is now standard
PCVT_EMU_MOUSE		removed completety
PCVT_SW0CNOUTP		removed completety
PCVT_PORTIO_DELAY	obsolete, removed
PCVT_KEYBDID		removed option, code is now standard
PCVT_SIGWINCH		removed option, code is now standard
PCVT_PALFLICKER		removed completety
PCVT_WAITRETRACE	removed completety
PCVT_NOFASTSCROLL	removed option, code is now standard
PCVT_USL_VT_COMPAT	removed the "old" non-vt Xserver code completely,
			depending on XSERVER, this code is now standard.

Pcvt userland cleanup will follow as well as newbusifying the
kernel part.
2000-03-26 09:17:14 +00:00
Warner Losh
e14c13dae0 Minor changes to some of the interfaces.
Remove RF_PCCARD_ATTR in anticipation of removing it from sys/rman.h
Add interface for setting "attributes" of pccard/cardbus devices.
Minor formatting nits.
2000-03-26 07:01:52 +00:00
Nick Hibma
20c206fd53 The REQUEST SENSE command is 6b not 16b. Use the struct scsi_sense to
indicate that we are working with that command.

Some corrected/added comments.
2000-03-26 01:39:12 +00:00
Poul-Henning Kamp
56a2308964 Fix floppy driver after my isadma changes. 2000-03-25 21:20:23 +00:00
Kris Kennaway
8c6ac5e5a5 Reword warning to make it clearer (I read it as "remove block devices created
before 2000-06-01" which is obviously not what was intended :-)
2000-03-25 21:10:20 +00:00
Warner Losh
6ea2fbe9be More fully initialize cardbus bridges. We now call the new generic
cardbus bridge init routine for all cardbuses.  This routine attempts
to compensate for BIOSes that do not setup the cardbus bridge into
legacy mode.  Since this is becoming more common, and cardbus pci
cards have appeared on the market, this makes sense.

Do some TI113x specific initialization.  This came in as part of the
patch.  Report TI1[1234]XX specific config registers protected by
bootverbose.

Minor code cleanup while I'm here.  I've also removed the unused code
present in the original patches, and cleaned it up slightly in places
as well.

The original patches supported more than one card, but these patches
support just one.  We should likely revisit this in the future.

This makes the Compaq card that Walnut Creek CD purchased for me work
in my bouncer box.

This is a MFC candidate.  However, I'd like to get some airtime on
these patches on as many laptops as possible before doing the MFC.  It
does change things somewhat.  In theory, apart from the minor TI
tweaks, this shouldn't change anything if the bridge is in legacy mode
already.

Submitted by: sanpei@sanpei.org (MIHIRA Yoshiro)
2000-03-25 20:29:55 +00:00
Dag-Erling Smørgrav
c2c0fac9c9 Attempt to provide real values for meminfo. 2000-03-25 19:41:18 +00:00
Warner Losh
190701a53a Two new chips found in Steve Passe's Protoge' laptop:
Lucent 56Flex DVS LTMOTEM (winmodem and unsupported)
	Cinemaster C 3.0 DVD Decoder
2000-03-25 17:01:59 +00:00
Dag-Erling Smørgrav
8deca17b79 Linux /proc filesystem.
Submitted by:	pb
2000-03-25 13:23:02 +00:00
Warner Losh
fbeea60676 Regen 2000-03-25 04:05:16 +00:00
Warner Losh
23b295b874 Merge 1.60 to 1.85 of NetBSD's pcmciadevs into our database. 2000-03-25 04:04:24 +00:00
Warner Losh
be8bcd17eb More pnpids. 2000-03-25 03:24:43 +00:00
Warner Losh
2d268ca4c3 Make pcic module compile again for NEWCARD (not for old pccard). 2000-03-25 03:16:19 +00:00
Warner Losh
b9118590b8 Make this compile again and harmonize with GENERIC:
o added gif, faith, wx, ida, amr, mlw, INET6
o many comment nits
o Comment out all the compat shim devices, mostly so that I know what
  they are:
	amd, dpt, ncr, adv, tx, vx, fe, cs, lnc,
o Leave the following commented out:
	ie, le

NEWCARD now compiles again.  Back to testing...
2000-03-25 03:15:03 +00:00
Matthew N. Dodd
c9c222f749 Fix a problem that caused TCP fragments to be lost (among other things.) 2000-03-24 23:31:42 +00:00
John Baldwin
76b501da94 Update sysinstall to use struct uc_device instead of struct isa_device
for generating /boot/kernel.conf.  Since this structure is shared, move
its definition out to a header file, just as struct isa_device was defined
in a header file.  This fixes the sysinstall breakage in -current.
2000-03-24 22:24:09 +00:00
Jeroen Ruigrok van der Werven
53543772cb Fix spelling, slingly -> singly.
Submitted by:	nrahlstr
2000-03-24 21:02:14 +00:00
Bill Fumerola
a68c41beea Add Mach64-LB graphics accelerator
Submitted by:	Brandon Martus <bmartus@chc-chimes.com> (unwittingly)
Obtained from:	NetBSD (syssrc/sys/dev/pci/pcidevs)
2000-03-24 19:31:02 +00:00
Søren Schmidt
8c918526a5 Fix the panic occuring on non-changer devices. 2000-03-24 07:44:20 +00:00
Cameron Grant
6b4b88f7a2 don't check extended features on codecs known to hang. should fix neomagic
problems.
2000-03-24 03:14:35 +00:00
Matthew Dillon
f1924a54f8 Fix in-kernel infinite loop in pipe_write() when the reader goes away
at just the wrong time.
2000-03-24 00:47:37 +00:00
Bruce Evans
4a8d210268 Remove unused file. 2000-03-23 19:22:14 +00:00
Bruce Evans
83f7669eff Fixed most disordering (almost all except for i4b and targets with
complicated rules).
2000-03-23 19:08:49 +00:00
Bruce Evans
822dcb81d0 Fixed most disordering (all except for targets with complicated rules). 2000-03-23 19:03:26 +00:00