intended behaviour in its man page. Simplify tty_drain() to match.
Don't call ttydevsw methods in tty_flush() if the device is gone
since we now sometimes call it then.
The flushing was supposed to be implemented by passing the FNONBLOCK
flag to VOP_CLOSE() for revoke(). The tty driver is one of the few
that can block in close and was one of the fewer that knew about this.
This almost worked in FreeBSD-1 and similarly in Net/2. These
versions only almost worked because there was and is considerable
confusion between IO_NDELAY and FNONBLOCK (aka O_NONBLOCK). IO_NDELAY
is only valid for VOP_READ() and VOP_WRITE(). For other VOPs it has
the same value as O_SHLOCK. But since vfs_subr.c and tty.c
consistently used the wrong flag and the O_SHLOCK flag is rarely set,
this mostly worked. It also gave the feature than applications could
get the non-blocking close by abusing O_SHLOCK.
This was first broken then fixed in 1995. I changed only the tty
driver to use FNONBLOCK, as a hack to get non-blocking via the normal
flag FNONBLOCK for last closes. I didn't know about revoke()'s use
of IO_NDELAY or change it to be consistent, so revoke() was broken.
Then I changed revoke() to match.
This was next broken in 1997 then fixed in 1998. Importing Lite2 made
the flags inconsistent again by undoing the fix only in vfs_subr.c.
This was next broken in 2008 by replacing everything in tty.c and not
checking any flags in last close. Other bugs in draining limited the
resulting unbounded waits to drain in some cases.
It is now possible to fix this better using the new FREVOKE flag.
Just restore flushing for revoke() for now. Don't restore or undo any
hacks for ordinary last closes yet. But remove dead code in the
1-second relative timeout (r272789). This did extra work to extend
the buggy draining for revoke() for as long as possible. The 1-second
timeout made this not very long by usually flushing after 1 second.
Submitted by: bde
MFC after: 2 weeks
by application closing its stdin (i.e. STDIN_FILENO) prior to
calling readpassphrase WITHOUT setting RPP_STDIN. What happens
then is that the readpassphrase would open /dev/tty, and since
file descriptors are reused, the call would return first unused
fd, which is 0 which is also STDIN_FILENO. Then due to the usage
of "input != STDIN_FILENO" in the code to do its logic, that
would result in noecho flags not set on that file descriptor,
which was original issue I've been trying to fix.
In addition to that, the readpassphrase() would leak file
descriptor on its way out, so fix that one as well.
This problem can be tested with:
$ ssh-add - < /tmp/myprivate.key
The password will not be hidden as it should and ktrace will
show:
53326 ssh-add CALL open(0x80142443c,0x100002<O_RDWR|O_CLOEXEC>,<unused>0x165f030)
53326 ssh-add NAMI "/dev/tty"
53326 ssh-add RET open 0
53326 ssh-add CALL sigprocmask(SIG_SETMASK,0x802eb1324,0x7fffffffd5e0)
53326 ssh-add RET sigprocmask 0
53326 ssh-add CALL sigaction(SIGALRM,0x7fffffffd630,0x7fffffffd610)
Instead of:
57690 ssh-add CALL open(0x80142443c,0x100002<O_RDWR|O_CLOEXEC>,<unused>0x165f030)
57690 ssh-add NAMI "/dev/tty"
57690 ssh-add RET open 4
57690 ssh-add CALL ioctl(0x4,TIOCGETA,0x7fffffffd860)
57690 ssh-add RET ioctl 0
57690 ssh-add CALL ioctl(0x4,TIOCSETAF,0x7fffffffd680)
57690 ssh-add RET ioctl 0
57690 ssh-add CALL sigprocmask(SIG_SETMASK,0x802eb1324,0x7fffffffd620)
57690 ssh-add RET sigprocmask 0
57690 ssh-add CALL sigaction(SIGALRM,0x7fffffffd670,0x7fffffffd650)
For the case when the key is read from the file.
Technically this can also be workaround'ed at the application side
by not closing the STDIN_FILENO in the first place, but readpassphrase(3)
doesn't need to make any assumptions about that. Plus the file descriptor
leak confirms that this is an oversight, rather than a deliberate behaviour.
MFC after: 1 week
This bug could be reproduced easily by calling sem_open() with O_CREAT |
O_EXCL on a semaphore that is already open in the process. The struct
sem_nameinfo would be freed while still in sem_list and later calls to
sem_open() or sem_close() could access freed memory.
PR: 206396
MFC after: 5 days
All gmon want's is a region of memory without the overhead of malloc().
Just mapping some pages with mmap is an easy way to accomplish this.
Approved by: jhb, cem, emaste
Obtained from: CheriBSD (bf33e1e70b368ababde74aa3ac70d108c8a52c69)
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D5005
The PSEUDO* macros should not declare <syscall>, only _<syscall> and
__sys_<syscall>. This was causing the interposing C wrappers to be
ignored due to link order.
Reviewed by: kib
Obtained from: CheriBSD (4e8e13c90fc6a80e1520de44a6864cfd78b3b56d)
MFC after: 1 week
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D4097
First, the authfd API now uses a direct file descriptor for the control
socket instead of a more abstract AuthenticationConnection structure.
Second, the functions now consistently return an error value.
Reviewed by: bdrewery
Prior to this patch, unless SSL_CA_CERT_FILE is set in the environment,
libfetch will set the CA file to "/usr/local/etc/cert.pem" if it exists,
and to "/etc/ssl/cert.pem" otherwise. This has the consequence of
masking SSL_CA_CERT_PATH, because OpenSSL will ignore the CA path if a CA
file is set but fails to load (see X509_STORE_load_locations()).
While here, fall back to OpenSSL defaults if neither SSL_CA_CERT_FILE nor
SSL_CA_CERT_PATH are set in the environment, and if neither of the
libfetch default CA files exists.
PR: 193871
Submitted by: John W. O'Brien <john@saltant.com>
Approved by: des
MFC after: 1 week
- Remove unneeded fstat()/lseek() calls.
- Return NULL and set errno to EINVAL on negative length.
- Fix small style problems and expand variable names.
After this change, it is possible to use this code for some irregular
files. For example, 'md5 /dev/md0' should now succeed.
Differential Revision: https://reviews.freebsd.org/D4748
Suggested by: bde
Reviewed by: bde, allanjude, delphij
linking. These are too large for a branch instruction to branch from an
earlier point in the code to somewhere later.
This will also allow these to be build with Thumb-2 when we get this
infrastructure.
Reviewed by: dim
Differential Revision: https://reviews.freebsd.org/D4855
tdelete() is supposed to return the address of the parent node that has
been deleted. We already keep track of this node in the loop between
lines 94-107. The GO_LEFT()/GO_RIGHT() macros are used later on as well,
so we must make sure not to change it to something else.
terminated.
If this buffer is adjacent to an unmapped page or a version of C with
bounds checked is used this may result in a crash.
PR: 206178
Submitted by: Alexander Cherepanov <cherepan@mccme.ru>
MFC after: 1 week
terminated.
If this buffer is adjacent to an unmapped page or a version of C with
bounds checked is used this may result in a crash.
PR: 206177
Submitted by: Alexander Cherepanov <cherepan@mccme.ru>
MFC after: 1 week
stackpointer. Userland expects the kernel to pass it an aligned sp and
pass a pointer to the arguments in x0. The kernel side was updated in
r289502, 3 months ago.
Sponsored by: ABT Systems Ltd
* Fix __FreeBSD_version check.
* Update history section in man page.
An MFC of this commit to stable/10 will allow using the new system calls
instead of the fallback.
MFC after: 3 days
This fixes the potential NULL pointer dereference properly, and also fixes
memory leaks encountered in the process of iterating through `*rp`.
MFC after: 1 week
Found by: Valgrind
Reported by: Dan Roberts <dan.roberts@isilon.com>
Submitted by: Miles Ohlrich <miles.ohlrich@isilon.com>
Sponsored by: EMC / Isilon Storage Division
__rpcbind_is_up(..) if getnetconfig(3) is partly successful in allocating
resources, but not completely successful by moving the endnetconfig(3) call
up before we return from the function if nconf == NULL.
MFC after: 1 week
Reported by: Coverity
Submitted by: Miles Ohlrich <miles.ohlrich@isilon.com>
Sponsored by: EMC / Isilon Storage Division
In the event that the getconfig(3) call in svcunix_create is partly successful,
some of the netconfig(3) resources allocated might be leaked if the call returns
NULL as endnetconfig(3) wasn't called explicitly in that case. Ensure that the
resources are fully cleaned up by going to the `done` label, which will call
endnetconfig(3) for us.
MFC after: 1 week
Reported by: Coverity
Submitted by: Miles Ohlrich <miles.ohlrich@isilon.com>
Sponsored by: EMC / Isilon Storage Division
generate code to branch based on an address in a register. This allows us
to have binaries larger than the 32MiB limit of a branch instruction.
The main use of this is with clang. Clang 3.8.0 has been shown to be larger
than the above limit.
up to now.
The new sendfile is the code that Netflix uses to send their multiple tens
of gigabits of data per second. The new implementation features asynchronous
I/O, when I/O operations are launched, but not awaited to be complete. An
explanation of why such behavior is beneficial compared to old one is
going to be too long for a commit message, so we will skip it here.
Additional features of new syscall are extra flags, which provide an
application more control over data sent. The SF_NOCACHE flag tells
kernel that data shouldn't be cached after it was sent. The SF_READAHEAD()
macro allows to specify readahead size in pages.
The new syscalls is a drop in replacement. No modifications are required
to applications. One can take nginx binary for stable/10 and run it
successfully on head. Although SF_NODISKIO lost its original sense, as now
sendfile doesn't block, and now means something completely different (tm),
using the new sendfile the old way is absolutely safe.
Celebrates: Netflix global launch!
Sponsored by: Nginx, Inc.
Sponsored by: Netflix
Relnotes: yes
Although we don't use it in tree yet libstand is installed as user-
facing /usr/liblibstand.a, and some work in progress makes use of it.
Instead of conflicting with ongoing libstand Makefile deduplication,
just add it now.
Set _PATH_DEFPATH to
/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin. This is the
path in the default class in the default /etc/login.conf,
excluding ~/bin which would not be expanded properly in a string
constant.
For normal logins, _PATH_DEFPATH is overridden by /etc/login.conf,
~/.login_conf or shell startup files. _PATH_DEFPATH is still used as a
default by execlp(), execvp(), posix_spawnp() and sh if PATH is not set, and
by cron. Especially the latter is a common trap (most recently in PR
204813).
PR: 204813
Reviewed by: secteam (delphij), alfred
Just remove it completely from the test as it's initialized but unused apart
from the free(3) call
Differential Revision: https://reviews.freebsd.org/D4769 (part of larger diff)
MFC after: 5 days
Reported by: cppcheck
Reviewed by: oshogbo
Sponsored by: EMC / Isilon Storage Division
