to detect (or load) kernel NLM support in rpc.lockd. Remove the '-k'
option to rpc.lockd and make kernel NLM the default. A user can still
force the use of the old user NLM by building a kernel without NFSLOCKD
and/or removing the nfslockd.ko module.
user-mode lock manager, build a kernel with the NFSLOCKD option and
add '-k' to 'rpc_lockd_flags' in rc.conf.
Highlights include:
* Thread-safe kernel RPC client - many threads can use the same RPC
client handle safely with replies being de-multiplexed at the socket
upcall (typically driven directly by the NIC interrupt) and handed
off to whichever thread matches the reply. For UDP sockets, many RPC
clients can share the same socket. This allows the use of a single
privileged UDP port number to talk to an arbitrary number of remote
hosts.
* Single-threaded kernel RPC server. Adding support for multi-threaded
server would be relatively straightforward and would follow
approximately the Solaris KPI. A single thread should be sufficient
for the NLM since it should rarely block in normal operation.
* Kernel mode NLM server supporting cancel requests and granted
callbacks. I've tested the NLM server reasonably extensively - it
passes both my own tests and the NFS Connectathon locking tests
running on Solaris, Mac OS X and Ubuntu Linux.
* Userland NLM client supported. While the NLM server doesn't have
support for the local NFS client's locking needs, it does have to
field async replies and granted callbacks from remote NLMs that the
local client has contacted. We relay these replies to the userland
rpc.lockd over a local domain RPC socket.
* Robust deadlock detection for the local lock manager. In particular
it will detect deadlocks caused by a lock request that covers more
than one blocking request. As required by the NLM protocol, all
deadlock detection happens synchronously - a user is guaranteed that
if a lock request isn't rejected immediately, the lock will
eventually be granted. The old system allowed for a 'deferred
deadlock' condition where a blocked lock request could wake up and
find that some other deadlock-causing lock owner had beaten them to
the lock.
* Since both local and remote locks are managed by the same kernel
locking code, local and remote processes can safely use file locks
for mutual exclusion. Local processes have no fairness advantage
compared to remote processes when contending to lock a region that
has just been unlocked - the local lock manager enforces a strict
first-come first-served model for both local and remote lockers.
Sponsored by: Isilon Systems
PR: 95247 107555 115524 116679
MFC after: 2 weeks
shared libraries.
This fixes a problem which resulted in 6.x->7.x upgrades having the
/usr/lib/libpthread.so -> libthr.so symlink missing; what happened was
that the old libpthread.so symlink pointed to /lib/libpthread.so.2 --
which matched the "/lib/*\.so\.[0-9]+" regex -- but the new symlink
didn't, so FreeBSD Update got confused and deleted the symlink as part
of its "remove old shared libraries" step.
To recreate the symlink (which I understand is necessary for ports like
KDE to build) on a 7.x system which FreeBSD Update upgraded from 6.x:
# ln -s libthr.so /usr/lib/libpthread.so
Reported by: Dmitry RCL Rekman
Help diagnosing bug from: kris
MFC after: 7 days
(NAP, GN and PANU). No reason to not to support them.
Separate SDP parameters data structures for the BNEP based profiles.
Generalize Service Availability SDP parameter creation.
Requested by: Iain Hibbert < plunky at rya-online dot net >
MFC after: 3 days
not exist. /etc/rc.d/mixer tried to restore non-existent recording
source because /var/var/db/mixer*-state contains '=rec' for example.
- Remove hardcoded mixer2 and mixer3 and do the right thing.
- Replace getopt(3) with hand-rolled option parser. It was not able
to handle 'mixer -rec mic' although it is a valid command.
- Make '-s' and '-S' mutualy exclusive as mixer(8) says.
- Do not re-read recording source unless it has been modified.
Quoth the man-page:
Fifologs provide a compact round-robin circular storage for recording
text and binary information to permanent storage in a bounded and pre-
dictable fashion, time and space wise.
Not yet connected to the build, but feel free to test & review.
RFCOMM channel if needed. There is really no good reason to not to support
this. AT-command exchange can be faked with chat script in ppp.conf.
MFC after: 1 week
from a group without the need to perform the same operation by replacing
the existing list via the '-M' option. The '-M' option requires someone
to fetch the existing members with pw, deleting the undesired members from
the list and sending the altered list back to pw.
Approved by: wes (mentor)
MFC after: 5 days
find the corresponding AS for that IP (-a switch).
We can also choose a different whois server with the -A switch. The
default is whois.radb.net.
Obtained from: NetBSD
Reviewed by: bms, njl (mentor)
Approved by: njl (mentor)
1) Use [AP]F_LOCAL rather than [AP]F_UNIX.
2) When copying a pipe's name, use f->f_un.f_pipe.f_pname, not f->f_un.f_fname.
PR: 20889
Submitted by: Damieon Stark
PR: 116642
Submitted by: Jim Pirzyk
Reviewed by: md5
for rpcbind(8) to crash.
The crash was due to a boolean variable initialized
improperly. Besides fixing the initialization, pick
a better name for the variable so that its meaning is
clear and no more coding errors appear around it.
due to the way watch(8) looks for available snoop devices.
PR: bin/118286
Submitted by: Mykola Zubach <zuborg@advancedhosters.com>
Reviewed by: rwatson, csjp, imp (all a long time ago)
Approved by: imp (mentor) (long time ago)
MFC after: 1 week
FTSENTs and uses only what fts_read() has just returned can rely
on fts_path being NUL-terminated. Under these conditions, a plain
vanilla "%s" format can be safely used to printf an fts_path.
OK'ed by: rwatson
Use ioctl() to get the window size in iostat(8), and force a new
header to be prepended to the output every time the current
window size changes. Change the number of lines before each
header to `rows - 3' when the terminal is resized, so that the
full terminal length can be used for output lines.
PR: bin/119705
Submitted by: keramida
Approved by: maxim
MFC after: 2 weeks
-d destdir option. For an automounted src tree using the logical cwd
in the Makefile keeps amd(8)'s mount timeout refreshed. Code to check
$PWD's validity cribbed from pwd(1).
Discussed on hackers@.
remove the format specification from mtree.8.
I also need to reconcile a few issues between this
mtree.5 and what is actually implemented in FreeBSD's
mtree utility.
MFC after: 30 days
probably the right thing to do a while ago but xorg has progressed
to the point that for novice users (who are the ones expected to think
installing X11 during an install...) it's best to just install the
whole x11/xorg metaport for them. This removes the X11 sub-menus
and sets it up so you just select whether or not you want X11. While
here garbage collect an X11 configuration menu I missed removing when
I removed support for attempting xorg configuration from inside sysinstall
a while ago.
Discussed with: rwatson, kris
No objection from: re
Release build tested by: rwatson
MFC after: 1 week
we would leak a saved screen for every other package we tried to install
that listed perl as one of its dependencies. When installing things
like gnome and kde that wound up being a LOT of leaked memory.
Insta-MFC request coming so this can be tested as part of 6.3-RC2...
Testing help from: kris
paragraph clarifying that portsnap does not behave the same way as
cvs and cvsup where local modifications are concerned.
Submitted by: peter
Feet shot: peter, kris, obrien, + many others
too small for today's standards. While loading packages sysinstall
blows past this by a LOT but I think (hope...) that's caused by other
bugs. I'll look more into why sysinstall's memory use has gotten so
out of control as it loads packages but independent of that there really
is no reason to leave the limits on datasize and stacksize in place. And
they can cause problems for some of the things "modern packages" might
be doing via pkg_add which gets run by sysinstall and would inherit the
limits.
Another insta-MFC probably coming, this is holding up 6.3-RC2. Sysinstall's
memory use is so out of control it blows past the current limit before it
finishes loading either of the meta-packages kde or gnome...
manual's Appendix D ("Old Features Supported but not Encouraged") in
the Seventh Edition Unix Programmer's Manual (January, 1979) by
retiring the " = {" method of of action specification in favor of a
plain "{". It is no longer necessary for this bootstrap program to
be compatible with 6th Edition systems. Some yaccs in the wild do not
support this old syntax any more, and compatibility with those systems
is more important these days (as there are easily 7 orders of magnitude
more of them than real v6 systems today).
Reviewed by: jhb@ and dds@ (the latter gave the reference).
"build dependencies" field is 5,108 characters which overflows the
length of the junk buffer by a teeny bit. This whole section needs
much more error checking but for now just completely ignore stuff
we have no interest in instead of copying it to someplace we don't
use in the process.
Insta-MFC probably coming since this is holding up 7.0-RC1...
1. Start mergemaster
2. Interrupt it
3. < Somehow the temproot directory disappears >
4. mergemaster -r
Many bad things can happen, especially if the -i option is in use.
Therefore, add a check to make sure it still exists before we start
comparing files.
Brought to my attention by:
PR: bin/40538
Submitted by: Cyrille Lefevre <cyrille.lefevre@laposte.net>
xorg-server doesn't include any video drivers so install xorg-drivers as
well. And if font-alias isn't installed the X server won't start,
complaining it can't find the font "fixed".
Insta-MFC coming, this was tested with a RELENG_6_3 release build and
the necessary packages as part of the first round of testing for 6.3-RC2.
for the port to drain).
+ Handle "*" as a priority properly.
+ Test what is free'ed.
+ Dynamically determine length vs. hardcoding it.
+ Free the previous message buffer (f_prevline) only after logging all the
messages and just before the process exit. Also check f_prevline for NULL
before using it.
+ The time displayed is not synchornized with the other log destinations.
+ Fix a comment.
Obtained from: Juniper Networks
approval. These changes were approved by adding it as port to
ports/ tree, but not for src/. I talked to PR submitter and miwi@
some days ago and explained the reasons for it, the both were agree
to add it to ports/ only.
order. This allows direct comparison of the output of two different
runs, regardless of the order in which readdir(2) returns directory
entries.
MFC after: 3 weeks
to autoamu_autofs_prot.h. It is easier to just create shell header within
the Bmake framework.
For now it's a stub - fill out when we know our Autofs direction.
- Print a warning if the version number recorded in the log is not what the
tool expects.
- Print a tidier error message when an unrecognized event is encountered
in the log.
- Don't print a spurious 'Unknown error: 0' when exiting after a parse
error.
doesn't use the default CFLAGS which contain -fno-strict-aliasing.
Until the code is cleaned up, just add -fno-strict-aliasing to the
CFLAGS of these for the tinderboxes' sake, allowing the rest of the
tree to have -Werror enabled again.
shared object files which have the same name as currently-installed
shared object files should be reinstalled after binaries are rolled
back. The order for rolling back updates is therefore
1. Install any old shared object files which can be installed without
overwriting a new shared object file.
2. Rollback everything which isn't a shared object or kernel file.
3. Rollback any shared object files which we didn't deal with in (1).
4. Rollback to the old kernel.
Bug reported by: Jan Henrik Sylvester
MFC after: 3 days
upgrading to new releases. Important parts of this code include
* automatically determining which optional components (e.g., src,
info, proflibs) are installed.
* merging changes in files which are modified locally and have
changed between the currently running and new release.
* prompting the user to rebuild all 3rd party software before
deleting old shared libraries.
Yes, this is compatible with "freebsd-update rollback" -- you can
test a new -BETA and roll back to the old release if you don't
like it.
Subject to re@ approval, this will be MFCed before 7.0-BETA3 and
6.3-RC1.
MFC after: 2 days
* When installing updates, make sure that securelevel <= 0. Otherwise
we can't remove the schg flag from files.
* When preparing to download updates, check to see if we already have
them sitting in the /files/ directory. This saves bandwidth if users
run "freebsd-update fetch" more than once without installing updates
in between.
While I'm here, bump the copyright date.
MFC after: 3 days
wpa_supplicant expects that it has exclusive access to the net80211 state so
when its starts poking in the WEP/WPA settings and the card is already
scanning it can cause net80211 to try and associate incorrectly with a
protected AP.
This is an inconvenience for firmware based cards such as iwi where it can be
sent an auth instruction with incomplete security info and cause a firmware
error.
Remove the 'ifconfig up' from network.subr since wpa_supplicant will
immediately down the interface again.
Reported by: Guy Helmer (and others)
Reviewed by: sam, brooks, avatar
MFC after: 3 days
all ports/UPDATING entries that affect one of the installed ports,
and are relevant on the given machine.
PR: bin/117564
Submitted by: Beat Gaetzi <beat@chruetertee.ch>
MFC after: 14 days
nfsd(8), in mountd(8), and in rpc.statd(8)
-h bindip
Specify specific IP addresses to bind to for TCP and UDP requests.
This option may be specified multiple times. If no -h option is
specified, rpc.lockd will bind to INADDR_ANY. Note that when specifying
IP addresses with -h, rpc.lockd will automatically add 127.0.0.1 and
if IPv6 is enabled, ::1 to the list.
PR: bin/98500
MFC after: 1 week
and in mountd(8)
-h bindip
Specify specific IP addresses to bind to for TCP and UDP requests.
This option may be specified multiple times. If no -h option is
specified, rpc.statd will bind to INADDR_ANY. Note that when specifying
IP addresses with -h, rpc.statd will automatically add 127.0.0.1 and if
IPv6 is enabled, ::1 to the list.
(coming for rpc.lockd too)
PR: bin/98500
MFC after: 1 week
caused a segfault. It turns out that in pre-7.0 systems if you do
getenv("amd_enable=YES") it will return the setting of the environment
variable "amd_enable" but now it returns NULL. I think I found the
places where sysinstall was potentially relying on that old behavior.
Fix is to make a copy of the string to be used for the getenv(3) call,
look for a '=' character in it, and replace it with '\0' if one is
found. Stuck to sysinstall's typical coding standards despite urges
to do otherwise.
PR: 117642
MFC after: 2 days
argv[1] to mimic crt0 behaviour. Do the job by a direct assignment
to __progname in order to stay compatible with NetBSD, whose
setprogname() is a deliberate no-op.
The reason for this change is that some programs (usually those
imported from NetBSD) use getprogname() to distinguish between their
aliases. (See pkill aka pgrep for example.)
This change can be useful, and applicable, to NetBSD, too.
pkg_version tried to open instead of just "INDEX" to make the actual
problem more clear (e.g. missing INDEX-8).
MFC after: 3 days
Reviewed by: portmgr (pav)
own line. We made this change in traceroute(8) some time ago. This
is particularly useful when you are not resolving hostnames since ip6
addresses can be quite long, and lines wrap fairly easily in the
multi-path router case.
Discussed with: bz
MFC after: 1 month
-h bindip
Specify specific IP addresses to bind to for TCP and UDP requests.
This option may be specified multiple times. If no -h option is
specified, mountd will bind to INADDR_ANY. Note that when specifying
IP addresses with -h, mountd will automatically add 127.0.0.1 and if
IPv6 is enabled, ::1 to the list.
PR: bin/114097
Reviewed by: pjd (an eariler version of the patch)
MFC after: 1 week
This commit includes the following core components:
* sample configuration file for sensorsd
* rc(8) script and glue code for sensorsd(8)
* sysctl(3) doc fixes for CTL_HW tree
* sysctl(3) documentation for hardware sensors
* sysctl(8) documentation for hardware sensors
* support for the sensor structure for sysctl(8)
* rc.conf(5) documentation for starting sensorsd(8)
* sensor_attach(9) et al documentation
* /sys/kern/kern_sensors.c
o sensor_attach(9) API for drivers to register ksensors
o sensor_task_register(9) API for the update task
o sysctl(3) glue code
o hw.sensors shadow tree for sysctl(8) internal magic
* <sys/sensors.h>
* HW_SENSORS definition for <sys/sysctl.h>
* sensors display for systat(1), including documentation
* sensorsd(8) and all applicable documentation
The userland part of the framework is entirely source-code
compatible with OpenBSD 4.1, 4.2 and -current as of today.
All sensor readings can be viewed with `sysctl hw.sensors`,
monitored in semi-realtime with `systat -sensors` and also
logged with `sensorsd`.
Submitted by: Constantine A. Murenin <cnst@FreeBSD.org>
Sponsored by: Google Summer of Code 2007 (GSoC2007/cnst-sensors)
Mentored by: syrinx
Tested by: many
OKed by: kensmith
Obtained from: OpenBSD (parts)
gets cleaned up upon receiving SIGINT. This un-breaks subsequent
executions of ipfwpcap and helps when debugging network/divert
issues like this:
ipfwpcap -r 6000 - | tcpdump -r -
MFC after: 1 week
with identical meaning as the colon ":". This is to support a syntax
that is more similar to a PCI device specification in the device hints
file. The selector is not fully compatible with the specification in
the hints file, since entries in that file use a different prefix,
which needs to be added to the getsel() routine, if full support of
that syntax is found to be desirable.
Approved by: re (Ken Smith)
PCI selectors with 2 or 3 elements behave exactly as before (i.e. the
domain is 0 and in the 2 element case, the function is also 0).
The form with 4 selector elements works as in the previous revision
and provides the PCI domain number as the left-most selector element.
This change allows old scripts (which used the 2 or 3 selector element
formats) to be kept. Without this patch, the 3 element form was parsed
as starting with a domain number (and the function was assumed to be 0),
with this patch, the domain is assumed to be 0 (and the last value is
used as the function number).
The man page is updated to describe the new selector semantics.
Approved by: re (Ken Smith)
the threading libraries is built. This simplifies the
logic in makefiles that need to check if the pthreads
support is present. It also fixes a bug where we would
build a threading library that we shouldn't have built:
for example, building with WITHOUT_LIBTHR and the default
value of DEFAULT_THREADING_LIB (libthr) would mistakenly
build the libthr library, but not install it.
Approved by: re (kensmith)
support machines having multiple independently numbered PCI domains
and don't support reenumeration without ambiguity amongst the
devices as seen by the OS and represented by PCI location strings.
This includes introducing a function pci_find_dbsf(9) which works
like pci_find_bsf(9) but additionally takes a domain number argument
and limiting pci_find_bsf(9) to only search devices in domain 0 (the
only domain in single-domain systems). Bge(4) and ofw_pcibus(4) are
changed to use pci_find_dbsf(9) instead of pci_find_bsf(9) in order
to no longer report false positives when searching for siblings and
dupe devices in the same domain respectively.
Along with this change the sole host-PCI bridge driver converted to
actually make use of PCI domain support is uninorth(4), the others
continue to use domain 0 only for now and need to be converted as
appropriate later on.
Note that this means that the format of the location strings as used
by pciconf(8) has been changed and that consumers of <sys/pciio.h>
potentially need to be recompiled.
Suggested by: jhb
Reviewed by: grehan, jhb, marcel
Approved by: re (kensmith), jhb (PCI maintainer hat)
WPA_SUPPLICANT_CFLAGS, etc. (consult the Makefile's for details)
o enable ipv6 support in hostapd (for communication w/ a radius backend)
PR: bin/116164
Submitted by: "Scot Hetzel" <swhetzel@gmail.com>
Approved by: re (gnn)
MFC after: 2 weeks
