avoiding EC read errors on some laptops.
- Stop updating Battery info for all user requests
- Update Battery info by notify events and resume method
- Poll Battery info every one minute
Suggested by: takawata
is calculated. this caused some trouble in the code which the ip header
is not modified. for example, inbound policy lookup failed.
Obtained from: KAME
MFC after: 1 week
Move sio from isa/sio.c to dev/sio/sio.c. The next step is to break
out the front end attachments, improve support for these parts on
different busses, and maybe, if we're lucky, merging in pc98 support.
It will also be MI and live in conf/files rather than files.*.
Approved by: bde
Tested with: i386, pc98
{set,fill}_{,fp,db}regs() fixup:
- Add dummy {set,fill}_dbregs() on architectures that don't have them.
- KSEfy the powerpc versions (struct proc -> struct thread).
- Some architectures had the prototypes in md_var.h, some in reg.h, and
some in both; for consistency, move them to reg.h on all platforms.
These functions aren't really MD (the implementation is MD, but the interface
is MI), so they should move to an MI header, but I haven't figured out which
one yet.
Run-tested on i386, build-tested on Alpha, untested on other platforms.
- Add dummy {set,fill}_dbregs() on architectures that don't have them.
- KSEfy the powerpc versions (struct proc -> struct thread).
- Some architectures had the prototypes in md_var.h, some in reg.h, and
some in both; for consistency, move them to reg.h on all platforms.
These functions aren't really MD (the implementation is MD, but the interface
is MI), so they should move to an MI header, but I haven't figured out which
{set,fill}_{,fp,db}regs() fixup:
- Add dummy {set,fill}_dbregs() on architectures that don't have them.
- KSEfy the powerpc versions (struct proc -> struct thread).
- Some architectures had the prototypes in md_var.h, some in reg.h, and
some in both; for consistency, move them to reg.h on all platforms.
These functions aren't really MD (the implementation is MD, but the interface
is MI), so they should move to an MI header, but I haven't figured out which
one yet.
Run-tested on i386, build-tested on Alpha, untested on other platforms.
lengths for CONNECT_REQ and CONNECT_IND are incorrect, which causes
dialouts to fail after certain error situations (an invalid -- not
wrong! -- number has been dialed). Since these messages are tagged as
too short, the device reads trailing garbage as the B protocol
parameters; this is OK as long as the garbage consists of zero bytes,
which it usually does, except after the said error.
Another change we have taken into use is to send an explicit Q.850
"normal call clearing" code when a call is ignored using PRI equipment
(specifically AVM T1); the CAPI pseudo-code for ignore, 1, translates
into something at least Ericsson exchanges interpret oddly (message
"this area is not reachable from your number"). NCCLR makes the exchange
give a busy signal, which is the behaviour at least we prefer
(conceivably, the ignore code could be made a sysctl variable).
The attached patch corrects the message length issue. It also includes a
somewhat unpretty solution for the PRI ignore code (if device's number
of channels equals 30, assume PRI and send NCCLR, otherwise send CAPI
ignore). Tested using AVM B1 PCI and T1 PCI.
Submitted by: Juha-Matti Liukkonen <jml@cubical.fi>
Reviewed by: hm
MFC after: 1 month
- sys/pc98/pc98/npx.c 1.87 (2001/09/15; author: imp)
I don't think pc98 has acpi at all, so ifdef the acpi attachments for
now.
This completes merging sys/pc98/pc98/npx.c into sys/i386/isa/npx.c so
that the former can be removed.
and the irq are different for pc98, and are not very well handled (we
use a historical mess of hard-coded values, values from header files
and values from hints).
- 1.58 (2000/09/01; author: kato)
Fixed FPU_ERROR_BROKEN code. It had old-isa code.
- 1.33 (1998/03/09; author: kato)
Make FPU_ERROR_BROKEN a new-style option.
- 1.7 (1996/10/09; author: asami)
Make sure FPU is recognized for non-Intel CPUs.
The log for rev.1.7 should have said something like:
Added FPU_ERROR_BROKEN option. This forces a successful probe for
exception 16, so that hardware with a broken FPU error signal can sort
of work.
- fix KV macro in t2_pci.c to include the sable_lynx_base variable
so that the T2 CSRs can be found on lynxes. Current should be
bootable on lynxes now.
Jonathon Lemon's driver (gx) is at least as fast and has more features
and is likely to be better supported.
It is also possible that Intel might support this chipset in FreeBSD
with their own driver. Somewhat secretive and furtive rumblings from
certain Yahoo employees have indicated that this might happen soon.
I'm a little unhappy at the lack of discussion on the net list about
this, or on developers, or on hackers, or the lack of mention on
audit. This then leaves me to try and figure out the right thing
to do.
I've concluded that the right thing to do is to remove wx from FreeBSD,
as this is probably best for FreeBSD.
was used. This resulted in bogus bad window traps (invalid wstate).
Add a trace to sfsr traps (alignment among other things).
Use KTR_TRAP instead of KTR_CT1.
Use the right registers when storing the values of various
mmu registers into the trap frame. This fixes a bug where sometimes
the context number reported by a fault would be garbage. Sometimes
it would be zero for faults on user address space so the kernel would
wrongly think that it was a fault on kernel address space and fail.
Use the preloaded registers in the vectored interrupt trap instead
of reading pointers from memory. Remove traces due to register
pressure and excess verbosity. We can probably still sneak in one
trace. Remove some debug code.
Go back to using the tsb register during kernel page table lookups.
This is the best way to not have to have the address of the kernel tsb be
a compile time constant. We lie and say we have 1 page tsb when really
its much larger. This way the hardware provides bits 13-22 of the
virtual address (the lower 9 bits of the virtual page number) in the
form of the address of the tte corresponding to the fault address in
the (1 page) kernel tsb. With some clever arithmetic we can then get
bits 22 and up from the tte tag and add them to the tte address in
order to index massive tsbs (basically unlimited).
Add traps for physical address hardware watchpoints.
Don't try to pass the window state from the trap table entry point
all the way down to the common trap code. Its too easy to clobber
and reading it again doesn't cost much.
Fixup some traces.
Fiddle the cwp bits on return from the kernel to user mode so that
the window we are returning to is always the same as the one we
restore to in the trap code. Strictly speaking this is not necessary,
it only affects return from fork and exec, but setting up the windows
right would require hard coding the right cwp values in cpu_fork and
setregs, basically hard coding the number of frames between syscall and
tl0_ret. The result of getting it wrong is usually a spill to an invalid
stack pointer; either 0 or pointing into kernel space. This should also
alleviate the need to context switch the cwp.
Transfer the trap state from locals to alternate globals in the trap
return code so that we can do a restore and rotate the windows before
reloading the trap registers. If the restore fails we'll trap back
into the kernel, so there's no point in loading the trap registers
before hand. Its is crucial that the window trap recovery code not
clobber the alternate globals.
boundary. It must be on at least an 8 byte boundary so that the length
of the signal code is a multiple of 8 (well aligned). The size is used
in the calculation of the address of the argument and environment vectors
on the user stack; getting it wrong results in the string pointers being
misaligned and causes alignment faults in getenv() among other things.
Allocate a regular stack frame below the signal frame on the user stack
and join up the frame pointer to the previous frame. This fixes longjmp-ing
out of signal handlers. Longjmp traverses the stack upwards in order to
find the right frame to return to, so the frame pointers must join up
seamlessly. I thought this would just work, but obviously the frame
needs to be below the signal frame, not above it like before. Account
for the extra space in the signal code.
Preload pointers to interrupt data structures in interrupt globals.
This avoids the need to load the pointers from memory in the vectored
interrupt trap handler.
Transfer the first 2 out registers into td_retval in setregs. We use
the same registers for system call arguments as return values, so these
registers got clobbered by the system call return values on return from
execve. They now get clobbered by the right values. We must put the values
in both the out registers in the trapframe and in td_retval because init
calls exec but fails to transfer the return value into the out registers.
This fixes a bug where the first exec after init would pass junk to the
c runtime, instead of a pointer to the argument strings. A better solution
would be to return EJUSTRETURN on success from execve.
Adjust for change in pmap_bootstraps prototype.
Map the message buffer after the trap table is setup. We will fault
on it immediately.
Don't use a hard coded address constant for the virtual address of the
kernel tsb. Allocate kernel virtual address space for the kernel tsb
at runtime.
Remove unused parameter to pmap_bootstrap.
Adapt pmap.c to use KVA_PAGES.
Map the message buffer too.
Add some traces.
Implement pmap_protect.
the system load average. Previously, the load average measurement
was susceptible to synchronisation with processes that run at
regular intervals such as the system bufdaemon process.
Each interval is now chosen at random within the range of 4 to 6
seconds. This large variation is chosen so that over the shorter
5-minute load average timescale there is a good dispersion of
samples across the 5-second sample period (the time to perform 60
5-second samples now has a standard deviation of approx 4.5 seconds).
be used to index tables of counters.
Remove intr_dispatch() inline, it is implemented directly in tl*_intr now.
Count stray interrupts in a table of counters like intrcnt.
Disable interrupts briefly when setting up the interrupt vector table.
We must disable interrupts completely, not just raise the pil.
Pass pointers to the intr_vector structures rather than a vector number
to sched_ithd and intr_stray.
to kern_synch.c in preparation for adding some jitter to the
inter-sample time.
Note that the "vm.loadavg" sysctl still lives in vm_meter.c which
isn't the right place, but it is appropriate for the current (bad)
name of that sysctl.
Suggested by: jhb (some time ago)
Reviewed by: bde
off to witness_init() making the check for double intializating a lock by
testing the LO_INITIALIZED flag moot. Workaround this by checking the
LO_INITIALIZED flag ourself before we bzero the lock structure.
Add some missing break statements in the socket ioctl switch.
Check the return value from copyin() / copyout().
Fix some disorderings and misindentations.
Support a couple more socket ioctls.
Add missing break statements.
be so dangerous it isn't funny. eg: if you panic inside NFS or softdep,
and then try and sync you run into held locks and cause either deadlocks,
recursive panics or other interesting chaos. Default is unchanged.
- Change LOCK_DEBUG so that it is always on if KTR is compiled in
regardless of the state of KTR_COMPILE. This means that we no longer
need to include sys/ktr.h before sys/lock.h to ensure a valid setting
for LOCK_DEBUG.
- Change the use of LOCK_DEBUG so that it is now always defined and its
value is used instead of merely its definition. That is, instead of
#ifdef LOCK_DEBUG, code should now use #if LOCK_DEBUG > 0.
- Use this latest to #error out in sys/mutex.h if sys/lock.h isn't
included before sys/mutex.h to ensure that the proper versions of the
mutex operations are used.
- As a result of (2) sys/mutex.h no longer includes sys/ktr.h in the
KERNEL case.
Requested by: bde (1)
tracks as /dev/acdNtY.
This solves the problems with having to deal with howmany and which
devices are open.
For hysterical reasons ONLY, make a link to both the acdNa & acdNc devices.
structure. This makes it possible to pre-allocate PTEs for the kernel,
which is necessary for a reliable implementation of pmap_kenter(). This
also avoids wasting space (about 48 bytes per page) for kernel mappings
and user mappings of memory-mapped devices.
This also fixes a bug with the previous version where the implementation
required the pv_entry structure to be physically contiguous but did not
enforce this (the structure size was not a power of two). This meant
that the pv_entry free list was quickly corrupted as soon as the system
was even mildly loaded.
that appeared to be very different from the MI version. These
differences were mostly bogus and caused by copying octal
definitions and write them as hexadecimal values without doing
any base conversion (ie 010 was copied to 0x10). After filtering
out these differences, any remaining (real) incompatibilities
have been merged into the MI header file to make them more visible.
While here, fix the termios <-> termio conversion WRT to the c_cc
field for Alpha. The termios values do not match the termio values
and thus prevents us from copying.
By eliminating the Alpha MD copy of linux_ioctl.h we also fixed
the recent build breakage caused by putting new bits in the MI
header and not in the MD header.
Also slightly change the name translation policy - only rename interfaces
that have the IFF_BROADCAST flag set. This is not perfect, but is closer to
how Linux names network interfaces.
the existence of the __gnuc_va_list type[*] because our compiler is GCC.
[*] __gnuc_va_list is defined in the GCC ginclude/stdarg.h replacement
headerwhich we don't use.
- Only release Giant in trap() if we locked it, otherwise we could release
Giant in a kernel trap if we didn't get it for a page fault and the
previous frame had grabbed the lock.
- Only get Giant for !MP safe syscalls.
Have sys/net/route.c:rtrequest1(), which takes ``rt_addrinfo *''
as the argument. Pass rt_addrinfo all the way down to rtrequest1
and ifa->ifa_rtrequest. 3rd argument of ifa->ifa_rtrequest is now
``rt_addrinfo *'' instead of ``sockaddr *'' (almost noone is
using it anyways).
Benefit: the following command now works. Previously we needed
two route(8) invocations, "add" then "change".
# route add -inet6 default ::1 -ifp gif0
Remove unsafe typecast in rtrequest(), from ``rtentry *'' to
``sockaddr *''. It was introduced by 4.3BSD-Reno and never
corrected.
Obtained from: BSD/OS, NetBSD
MFC after: 1 month
PR: kern/28360
- Report destination address of a P2P link when servicing
routing socket messages.
- Report interface name, address, and destination address
of a P2P link when servicing NET_RT_{DUMP,FLAGS} sysctls.
Part of CSRG revision 8.6 coresponds to revision 1.12.
CSRG revision 8.7 corresponds to revision 1.15.
