Unfortunately, the stock zlib.h is not:
line 885: 'err' parameter shadows global 'err' definition from <err.h>
Back the WARNS level down to 3 to accomodate borked zlib.h.
reply with a 416 error code (requested range not satisfiable) because
we ask it to start at the end of the file. Handle this gracefully by
considering a 416 reply a success if the requested offset exactly
matches the length of the file and the requested length is zero.
This is the second of two commits; bring in the userland support to finish.
Teach libipsec and setkey about the tcp-md5 class of security associations,
thus allowing administrators to add per-host keys to the SADB for use by
the tcpsignature_compute() function.
Document that a single SPI must be used until such time as the code which
adds support to the SPD to specify flows for tcp-md5 treatment is suitable
for production.
Sponsored by: sentex.net
These files had tags after teh copyright notice,
inside the comment block (incorrect, removed),
and outside the comment block (correct).
Approved by: rwatson (mentor)
These files had tags after the copyright notice,
inside the comment block (incorrect, removed),
and outside the comment block (correct).
Approved by: rwatson (mentor)
What it is:
A library for reading and writing various streaming archive
formats, especially tar and cpio. Being a library, it should
be easy to incorporate into pkg_* tools, sysinstall, and any
other place that needs to read or write such archives.
Features:
* Full automatic detection of both compression and archive format.
* Extensible internal architecture to make it easy to add new formats.
* Support for "pax interchange format," a new POSIX-standard tar format
that eliminates essentially all of the restrictions of historic formats.
* BSD license
Thanks to: jkh for pushing me to start this work, gordon for
encouraging me to commit it, bde for answering endless style
questions, and many others for feedback and encouragement.
Status: Pretty good overall, though there are still a few rough edges and
the library could always use more testing. Feedback eagerly solicited.
overridden by the threads library to provide a userland version
of non-pshared semaphores and cancellation points. Also add
a sem_timedwait().
The libc version of semaphores always uses kernel semaphores
regardless of whether pshared is set or not. When threads are
not present, it is difficult to get sem_wait() or sem_timedwait()
to do the right thing (since pthread_cond_timedwait() and
pthread_cond_wait() are stubs in libc and just return immediately).
caller without closing the disk device and freeing allocated
memory. Not closing the disk device prevents GEOM from retasting
after spoiling.
Pointy hat: marcel
thread library for i386, amd64, and ia64. For alpha
and sparc64 the library is not changed and remains libkse,
and links are installed so that libpthread -> libc_r.
The gcc -pthread option will be changed in a separate
commit so that it links to -lpthread instead of -lc_r.
Approved by: re@
what do I get for my troubles? libc breaks offcourse!
Reimplement a hack (in libthr) that allows libc to use
rwlocks without initializing them first. The hack was reimplemented
so that only a private libc version of the rwlock locking functions
initializes an uninitialized rwlock. The application version will
correctly fail.
the system call got interrupted and the absolute timeout is
converted to a relative timeout, it may happen that we get a
negative number. In such a case, simply set the timeout to
zero so that if the event that the thread wants to wait for has
happened it can still return successfully, but if it hasn't
happened then the thread doesn't suspend indefinitely. This should
fix certain applications (including mozilla) that seem to hang
indefinitely sometimes.
Noticed and debugged by: Morten Johansen <root@morten-johansen.net>
return an error value that made Write_Disk() abort. While on the
subject, improve the initialization of the error variable in read_gpt()
and update_gpt() even though nothing was broken there.
and NgAllocRecvData(), that dynamically allocate buffer for a binary
message, an ascii message, and a data packet, respectively. The size
of the allocated buffer is equal to the socket's receive buffer size
to guarantee that a message or a data packet is not truncated.
- Get rid of the static size buffer in NgSendAsciiMsg().
OK'ed by: archie, julian
instead of creating them by hand and storing them in the CVS tree. Add
gensnmptree to the bootstrap tools (it is used to generated these files).
This simplifies the update procedure.
Submitted by: ru
- bzipfs and gzipfs now properly return errno values directly from their
read routines rather than returning -1.
- missing errno values on error returns for the seek routines on almost
all filesystems were added.
- fstat() now returns -1 if an error occurs rather than ignoring it.
- nfs's readdir() routine now reports valid errno values if an error or
EOF occurs rather than EPERM (It was just returning 0 for success and
1 for failure).
- nullfs used the wrong semantics for every function besides close() and
seek(). Getting it right for close() appears to be an accident at that.
- read() for buffered files no longer returns 0 (EOF) if an error occurs,
but returns -1 instead.
Extend libsdp(3) API to allow service registration and removal.
Fix uninitialized variable bug in sdpcontrol(8).
Reviewed by: imp (mentor)
No objection: ru
This results in no functional change, aside from fixing a data
corruption bug on LP64 platforms. The code here could still use a
significant amount of cleanup.
PR: 56502
Submitted by: hrs (earlier version)
o Simplify the logic by removing a lot of unnecesary nesting
o Reduce the amount of local variables
o Zero-out the allocated structure and get rid of
all the unnecessary setting to 0 and NULL;
Refactor _pthread_mutex_destroy
o Simplify the logic by removing a lot of unnecesary nesting
o No need to check pointer that the mutex attributes points
to. Checking passed in pointer is enough.
a list in the thread structure to keep track of the locks and
how many times they have been locked. This list is checked
on every lock and unlock. The traversal through the list is
O(n). Most applications don't hold so many locks at once that
this will become a problem. However, if it does become a problem
it might be a good idea to review this once libthr is
off probation and in the optimization cycle.
This fixes:
o deadlock when a thread tries to recursively acquire a
read lock when a writer is waiting on the lock.
o a thread could previously successfully unlock a lock it did not own
o deadlock when a thread tries to acquire a write lock on
a lock it already owns for reading or writing [ this is admittedly
not required by POSIX, but is nice to have ]
- Update and improve the documentation for %[aA]
o Like %[eE], %[aA] may round the result if a precision is specified.
o Grammar police: Fix a split infinitive.
o The FreeBSD implementation does better than the minimum required
by C99 (literal translation of the mantissa). The digit before
the hexadecimal-point is never 0 unless the number itself is 0.
o Clarify that the exponent field represents a decimal exponent of 2.
o Discuss the fact that multiple valid representations are possible.
o Remove the entry in the BUGS section claiming that %[aA] is not
implemented.
- Remove the entry in the BUGS section claiming that the ' flag for
printing thousands separators is unimplemented for floating-point.
- Remove the entry in the BUGS section claiming that the L modifier
reduces the precision to "double" before conversion.
on the release media -- only put what is different in the crypto
version compared to the base version. This reduces PAM entries
in /usr/lib in the "crypto" distribution to:
libpam.a
libpam.so@
libpam.so.2
pam_krb5.so@
pam_krb5.so.2
pam_ksu.so@
pam_ksu.so.2
pam_ssh.so@
pam_ssh.so.2
The libpam.so* is still redundant (it is identical to the "base"
version), but we can't set DISTRIBUTION differently for libpam.a
and libpam.so.
(The removal of libpam.so* from the crypto distribution could be
addressed by the release/scripts/crypto-make.sh script, but then
we'd also need to remove redundant PAM headers, and I'm not sure
this is worth a hassle.)
these are not fully implemented and ifdef'd out, the bugs have
never manifested themselves. Specifically:
- Fix a memory leak in the case where %a follows another
floating-point format.
- Make the %a/%A code behave like %e/%E with respect to
precision.
- It is no longer valid to assume that '-' and '0x' are
mutually exclusive.
- Address other minor issues.
Makes it possible to have multiple packet aliasing instances in a
single process by moving all static and global variables into an
instance structure called "struct libalias".
Redefine a new API based on s/PacketAlias/LibAlias/g
Add new "instance" argument to all functions in the new API.
Implement old API in terms of the new API.
For pshared semaphore, this commit still does not enable cancellation
point, I think there should be a pthread_enter_cancellation_point_np
for libc to implement a safe cancellation point.
code and simply return EINVAL (which is allowed by the standard) in
all those pthread functions that previously initialized it.
o Refactor the pthread_rwlock_[try]rdlock() and pthread_rwlock_[try]wrlock()
functions. They are now completeley condensed into rwlock_rdlock_common()
and rwlock_wrlock_common(), respectively.
o If the application tries to destroy an rwlock that is currently
held by a thread return EBUSY where it previously went ahead and
freed all resources associated with the lock.
o Refactor _pthread_rwlock_init() to make it look (relatively) sane.
o When obtaining a read lock on an rwlock the check for whether it
would exceed the maximum allowed read locks should happen *before*
we obtain the lock.
o The pthread_rwlock_* functions shall *never* return EINTR, so make
sure to requeue/resuspend the thread if it encounters such an error.
o Make a note that pthread_rwlock_unlock() needs to ensure it holds a
lock on an rwlock it tries to unlock. It will be implemented in a
separate commit because it requires some additional rwlock infrastructure.
associated floppy if needed into a static split_openfile() function.
- Use this function in splitfs_open() to open the first chunk rather
than using open() directly. This allows the first chunk to be located
on a different disk than the actual foo.split file.
getpwent(3) or getpwuid(3) when using NIS adjunct maps. The bug was
present in the internal `nis_passwd' function. The lookup in the
adjunct map used the name passed into `nis_passwd', however no name
was of course supplied by getpwent or getpwuid. Correctly use the
name from the `struct pwd' that was found instead.
PR: bin/59962
Submitted by: Gabriel Gomez <ggomez@fing.edu.uy>
in contributed sources with just a hack made possible
by bsd.sys.mk,v 1.33. This is better because it just
nulls out the warning flags rather than adding gcc(1)
specific -w option to CFLAGS.
must first attach to the traced process. If the tracing process
exits without detaching, the traced process will be killed rather
than continued. For the duration of the tracing session, the traced
process is reparented to the tracing process (with resulting expected
behaviors). It is permissible to trace more than one other process
at a time. When using waitpid() to monitor the behavior of the traced
process, signals are intercepted: they may optionally then be
forwarded using ptrace(). Signals are generated normally by and for
the process, but also by the tracing facility (SIGTRAP).
Product of: Suffering
Sponsored by: DARPA, AFRL
at it, use the ANSI C generic pointer type for the second argument,
thus matching the documentation.
Remove the now extraneous (and now conflicting) function declarations
in various libc sources. Remove now unnecessary casts.
Reviewed by: bde
incorrectly when encountering `large' groups (many members and/or many
long member names). The reporter tracked this down to the glibc NSS
module compatibility code (nss_compat.c): it would prematurely record
that a NSS module was finished iterating through its database in some
cases.
Two aspects are corrected:
1. nss_compat.c recorded that a NSS module was finished iterating
whenever the module reported something other than SUCCESS. The
correct logic is to continue iteration when the module reports
either SUCCESS or RETURN. The __nss_compat_getgrent_r and
__nss_compat_getpwent_r routines are updated to reflect this.
2. An internal helper macro __nss_compat_result is used to map glibc
NSS status codes to BSD NSS status codes (e.g. NSS_STATUS_SUCCESS ->
NS_SUCCESS). It provided the obvious mapping.
When a NSS routine is called with a too-small buffer, the
convention in the BSD NSS code is to report RETURN. (This is used
to implement reentrant APIs such as getpwnam_r(3).) However, the
convention in glibc for this case is to set errno = ERANGE and
overload TRYAGAIN. __nss_compat_result is updated to handle this
case.
PR: bin/60287
Reported by: Lachlan O'Dea <odela01@ca.com>
on a rwlock while there are writers waiting. We normally favor
writers but when a reader already has at least one other read lock,
we favor the reader. We don't track all the rwlocks owned by a
thread, nor all the threads that own a rwlock -- we just keep
a count of all the read locks owned by a thread.
PR: 24641
waiting on a locked mutex. This involves passing a struct timespec
from the pthread mutex locking interfaces all the way down to the
function that suspends the thread until the mutex is released.
The timeout is assumed to be an absolute time (i.e. not relative to
the current time).
Also, in _thread_suspend() make the passed in timespec const.
o Remove some code duplication between _thread_init(), which is run once
to initialize libthr and the intitial thread, and pthread_create(), which
initializes newly created threads, into a new function called from both
places: init_td_common()
o Move initialization of certain parts of libthr into a separate
function. These include:
- Active threads list and it's lock
- Dead threads list and it's lock & condition variable
- Naming and insertion of the initial thread into the
active threads list.
ó++ ABI document at http://www.codesourcery.com/cxx-abi/abi.html#dso-dtor
The ABI was initially defined for ia64, but GCC3 and Intel compilers
have adopted it on other platforms.
This is the patch from PR bin/59552 with a number of changes by
me.
PR: bin/59552
Submitted by: Bradley T Hughes (bhughes at trolltech dot com)
C++ ABI document at http://www.codesourcery.com/cxx-abi/abi.html#dso-dtor
The ABI was initially defined for ia64, but GCC3 and Intel compilers
have adopted it on other platforms.
This is the patch from PR bin/59552 with a number of changes by
me.
PR: bin/59552
Submitted by: Bradley T Hughes (bhughes at trolltech dot com)
work before anyways, and I didn't want to fix broken code I had no
way of testing. It was necessary however, in order to get rid of GIANT_LOCK.
Pthread priorities will have to wait a little longer to get fixed.
problems: (1) The wrong flag was being checked for in the attribute
(2) The pthread's state was not being set to indicate it was
suspended.
Noticed by: Igor Sysoev <is@rambler-co.ru>
call (pam_get_authtok() will return the previous token if try_first_pass
or use_first_pass is specified). Incidentally fix an ugly bug where the
buffer holding the prompt was freed immediately before use, instead of
after.
likely to be non-zero. When leaving the cancellation point, check
the return value against -1 to see if cancellation should be
checked. While I'm here, make the same change to connect() just
to be consisitent.
Pointed out by: davidxu
_thr_leave_cancellation_point to _thr_cancel_leave, add a parameter
to _thr_cancel_leave to indicate whether cancellation point should be
checked, this gives us an option to not check cancallation point if
a syscall successfully returns to avoid any leaks, current I have
creat(), open() and fcntl(F_DUPFD) to not check cancellation point
after they sucessfully returned.
Replace some members in structure kse with bit flags to same some
memory.
Conditionally compile THR_ASSERT to nothing if _PTHREAD_INVARIANTS is
not defined.
Inline some small functions in thr_cancel.c.
Use __predict_false in thr_kern.c for some executed only once code.
Reviewd by: deischen
flags. We now create asynchronous contexts or syscall contexts only.
Syscall contexts differ from the minimal ABI dictated contexts by
having the scratch registers saved and restored because that's where
we keep the syscall arguments and syscall return values.
Since this change affects KSE, have it use kse_switchin(2) for the
"new" syscall context.
Instead of just deleting it, turn the original page into a general
overview of the multibyte character conversion functions, somewhat
similar to stdio(3).
UTS with the stack correctly aligned. Also, while here, use an indirect
jump rather than the pushq/ret hack.
This fixes threaded apps that use floating point for me, although
it hasn't solved all the problems. It is an improvement though.
Preservation of the 128 byte red zone hasn't been resolved yet.
Approved by: re (scottl)
ABI-required stack alignment. C code expects that the push of the
return address disturbed the 16 byte alignment and it will take corrective
measures to fix it before making another call. Of course, if its wrong
to start with, then all hell breaks loose. Essentially we "fix" this
by making the stack alignment odd to start with.
This was one of the things that broke on libkse with apps that use
floating point/varargs/etc.
Approved by: re (scottl)
we can end up with some threads with a non-16-byte-aligned stack. This
causes some interesting side effects, including general protection
faults leading to a SIGBUS when doing floating point or varargs. This
should be just a verbose NOP for the other platforms.
Approved by: re (scottl)
to sendfile(2) being erroneously automatically restarted after a signal
is delivered. Fixed by converting ERESTART to EINTR prior to exiting.
Updated manual page to indicate the potential EINTR error, its cause
and consequences.
Approved by: re@freebsd.org
through branch predict as suggested in INTEL IA32 optimization guide.
2.Allocate siginfo arrary separately to avoid pthread to be allocated at
2K boundary, which hits L1 address alias problem and causes context
switch to be slow down.
3.Simplify context switch code by removing redundant code, code size is
reduced, so it is expected to run faster.
Reviewed by: deischen
Approved by: re (scottl)
in init_main_thread. Also don't initialize lock and lockuser again for initial
thread, it is already done by _thr_alloc().
Reviewed by: deischen
Approved by: re (scottl)
initialization overhead, there's a problem in that we never call
imalloc() and thus malloc_init() for zero-sized allocations. As a
result, malloc(0) returns NULL when it's the first or only malloc in
the program. Any non-zero allocation will initialize the malloc code
with the side-effect that subsequent zero-sized allocations return a
non-NULL pointer. This is because the pointer we return for zero-
sized allocations is calculated from malloc_pageshift, which needs
to be initialized at runtime on ia64.
The result of the inconsistent behaviour described above is that
configure scripts failed the test for a GNU compatible malloc. This
resulted in a lot of broken ports.
Other, even simpler, solutions were possible as well:
1. initialize malloc_pageshift with some non-zero value (say 13 for
8KB pages) and keep the runtime adjustment.
2. Stop using malloc_pageshift to calculate ZEROSIZEPTR.
Removal of the runtime adjustment was chosen because then ia64 is the
same as any other platform. It is not to say that using a page size
obtained at runtime is bad per se. It's that there's currently a high
level of gratuity for its existence and the moment it causes problems
is the moment you need to get rid of it. Hence, it's not unthinkable
that this commit is (partially) reverted some time in the future when
we do have a good reason for it and a good way to achieve it.
Approved by: re@ (rwatson)
Reported by: kris (portmgr@) -- may the ports be with you
that they will be installed before application constructors are invoked.
Its possible to link applications such that this fails, application code
is invoked before they are installed, but, well, Don't Do That.
Approved by: re (jhb)
was rejected as a range error, while any values less than LONG_MIN
were silently substituted with LONG_MIN. Furthermore, on some
platforms `time_t' has less range than `long' (e.g. alpha), which may
give incorrect results when parsing some strings.
context of sockets, and document EINVAL as a possible failure mode
based on the object selected, not just the label provided.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
SO_PEERLABEL. This provides an interface to query the label of a
socket peer without embedding implementation details of mac_t in
the application. Previously, sizeof(*mac_t) had to be specified
by an application when performing getsockopt().
Document mac_get_peer(3), and expand documentation of the other
mac_get(3) functions. Note that it's possible to get EINVAL back
from mac_get_fd(3) when pointing it at an inappropriate object.
NOTE: mac_get_fd() and mac_set_fd() support for sockets will
follow shortly, so the documentation is slightly ahead of the
code.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
mac_free(3), which is used only for variables of type mac_t in
the FreeBSD implementation.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
constants NG_*SIZ that include the trailing NUL byte. This change
is mostly mechanical except for the replacement of a couple of snprintf()
and sprintf() calls with strlcpy.
is accessed for the first time as a result of an application looking
up label configuration information. Previously, the check and read
were kicked off by mac_prepare_(typename)() functions; since
mac_prepare_type() may now be directly employed by a user process,
push the check and initialization into that function.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
Replace occurences of the magic constant 2 with an offsetof macro
call that computes the size of the leading members of the sockaddr.
Use strlcpy instead of sprintf where appropriate. Document the new changes
in the man page.
- In __sigreturn call sigprocmask() to restore our signal state rather than
returning through sigreturn(). jmp to ___sigreturn to restore our register
state following this.
Requested by: pete
symbols exported by newer versions of libc, and so we want applications
depending on the newer library code to be required to link against the
newer libc.
Discussed with: scottl, kris, imp
set NAS-IP-Address attribute in requests generated by the pam_radius
module. This attribute is mandatory for some Radius servers out there.
Reviewed by: des
MFC after: 2 weeks
on whether the parent chunk is of type whole. This also applies to
MBR slices for non-GPT disks. Since most of the GPT handling is
conditionally compiled, do the same with the partition naming.
This fixes a braino that caused slices to be named as GPT partitions
and generally messing up an install.
Pointy hat: marcel
string files (__SSTR flag set). This is necessary because __sputc()
does not respect the __SALC flag, and crashes trying to flush the buffer
instead of resizing it.
PR: 59167
