These functions get/set tty winsize respectively, and are trivial wrappers
around corresponding termio ioctls.
The functions are expected to be a part of POSIX.1 issue 8:
https://www.austingroupbugs.net/view.php?id=1151#c3856.
They are currently available in NetBSD and in musl libc.
PR: 251868
Submitted by: Soumendra Ganguly <soumendraganguly@gmail.com>
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D27650
This change introduces framework that allows to dynamically
attach or detach longest prefix match (lpm) lookup algorithms
to speed up datapath route tables lookups.
Framework takes care of handling initial synchronisation,
route subscription, nhop/nhop groups reference and indexing,
dataplane attachments and fib instance algorithm setup/teardown.
Framework features automatic algorithm selection, allowing for
picking the best matching algorithm on-the-fly based on the
amount of routes in the routing table.
Currently framework code is guarded under FIB_ALGO config option.
An idea is to enable it by default in the next couple of weeks.
The following algorithms are provided by default:
IPv4:
* bsearch4 (lockless binary search in a special IP array), tailored for
small-fib (<16 routes)
* radix4_lockless (lockless immutable radix, re-created on every rtable change),
tailored for small-fib (<1000 routes)
* radix4 (base system radix backend)
* dpdk_lpm4 (DPDK DIR24-8-based lookups), lockless datastrucure, optimized
for large-fib (D27412)
IPv6:
* radix6_lockless (lockless immutable radix, re-created on every rtable change),
tailed for small-fib (<1000 routes)
* radix6 (base system radix backend)
* dpdk_lpm6 (DPDK DIR24-8-based lookups), lockless datastrucure, optimized
for large-fib (D27412)
Performance changes:
Micro benchmarks (I7-7660U, single-core lookups, 2048k dst, code in D27604):
IPv4:
8 routes:
radix4: ~20mpps
radix4_lockless: ~24.8mpps
bsearch4: ~69mpps
dpdk_lpm4: ~67 mpps
700k routes:
radix4_lockless: 3.3mpps
dpdk_lpm4: 46mpps
IPv6:
8 routes:
radix6_lockless: ~20mpps
dpdk_lpm6: ~70mpps
100k routes:
radix6_lockless: 13.9mpps
dpdk_lpm6: 57mpps
Forwarding benchmarks:
+ 10-15% IPv4 forwarding performance (small-fib, bsearch4)
+ 25% IPv4 forwarding performance (full-view, dpdk_lpm4)
+ 20% IPv6 forwarding performance (full-view, dpdk_lpm6)
Control:
Framwork adds the following runtime sysctls:
List algos
* net.route.algo.inet.algo_list: bsearch4, radix4_lockless, radix4
* net.route.algo.inet6.algo_list: radix6_lockless, radix6, dpdk_lpm6
Debug level (7=LOG_DEBUG, per-route)
net.route.algo.debug_level: 5
Algo selection (currently only for fib 0):
net.route.algo.inet.algo: bsearch4
net.route.algo.inet6.algo: radix6_lockless
Support for manually changing algos in non-default fib will be added
soon. Some sysctl names will be changed in the near future.
Differential Revision: https://reviews.freebsd.org/D27401
If LED state is set through evdev interface, than asynchronous nature
of USB transfer callback can lead to change of order of events echoed
back to userland as it causes LED events to be echoed with some lag.
Fix that with echoing of LED events synchronously in ioctl handler.
Reviewed by: hselasky
Obtained from: sysutils/iichid
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D27750
Unlike AT keyboards, HID devices are able to send all pc105 key
states within a single report. Let evdev to transmit all key state
changes within a single report too.
Reviewed by: hselasky
Obtained from: sysutils/iichid
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D27749
Add support for LAN found on Thinkpad USB-C and Thunderbolt Gen 2
docking stations.
Submitted by: ali.abdallah@suse.com
MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking
Hardware timestamp reporting is disabled by default as it produces many
extra events which are not handled by consumers like libinput.
Add hw.usb.wmt.timestamps=1 tunable to loader.conf to enable it.
Obtained from: sysutils/iichid
In Hybrid mode, the number of contacts that can be reported in one
report is less than the maximum number of contacts that the device
supports. For example, a device that supports a maximum of 4
concurrent physical contacts, can set up its top-level collection to
deliver a maximum of two contacts in one report. If four contact
points are present, the device can break these up into two serial
reports that deliver two contacts each.
Obtained from: sysutils/iichid
When using NFS-over-TLS, an NFS client can optionally provide an X.509
certificate to the server during the TLS handshake. For some situations,
such as different NFS servers or different certificates being mapped
to different user credentials on the NFS server, there may be a need
for different mounts to provide different certificates.
This new mount option called "tlscertname" may be used to specify a
non-default certificate be provided. This alernate certificate will
be stored in /etc/rpc.tlsclntd in a file with a name based on what is
provided by this mount option.
Original if_dwc driver used m_defrag as an implementation shortcut but on
1000Mb networks it affects performance. Implement multi-descriptor support for
TX path.
Tested on RK3399-Firefly, patch adds ~15% of network throughput.
Reviewed By: manu
Differential Revision: https://reviews.freebsd.org/D27520
The existing values correspond to x86 exception vector numbers, but the
trap numbers used in the kernel do not match these 1-to-1. Prefer the
definitions from x86/trap.h, as they are what actually get passed to
kdb_trap(). This is of little consequence, as gdb_cpu_signal() only
reports the trap reason (signal number) to the gdb client.
This is limited to the subset of trap values for which kdb_trap() is
reachable.
Reviewed by: kib
Discussed with: jhb
MFC after: 1 week
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D27645
Add support for the remote 'G' packet. This is not widely used by gdb
when 'P' is supported, but is technically required by any remote gdb
stub implementation [1].
[1] https://sourceware.org/gdb/current/onlinedocs/gdb/Overview.html
Reviewed by: cem
MFC after: 1 week
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
NetApp PR: 44
Differential Revision: https://reviews.freebsd.org/D27644
We support bulk reads of the register set, but not reading specific
registers via the 'p' packet. This is useful at least for the 'call'
command in gdb.
Reviewed by: cem
MFC after: 1 week
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
NetApp PR: 44
Differential Revision: https://reviews.freebsd.org/D27644
Now that bhyve(8) supports UART, bvmconsole and bvmdebug are no longer needed.
This also removes the '-b' and '-g' flag from bhyve(8). These two flags were
marked deprecated in r368519.
Reviewed by: grehan, kevans
Approved by: kevans (mentor)
Differential Revision: https://reviews.freebsd.org/D27490
r368193 was suppsed to rename the MOF firmware image, but the
qat_c2xxxfw makefile defined the two images in the wrong order so the
MMP image was renamed instead.
MFC after: 3 days
Sponsored by: Rubicon Communications, LLC (Netgate)
When copying sockaddrs out to userspace, we pad them to a multiple of
the platform alignment (sizeof(long)). However, some sockaddr sizes,
such as struct sockaddr_dl, are not an integer multiple of the
alignment, so we may end up copying out uninitialized bytes.
Fix this by always bouncing through a pre-zeroed sockaddr_storage.
Reported by: KASAN
Reviewed by: melifaro
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27729
g_handleattr_int() consumes the bio if the attribute matches, so when we
check bp->bio_cmd bp may have been freed.
Move GETATTR handling to a separate function to avoid the problem. We
do not need to set bio_completed for such bios, g_handleattr_int() will
handle it. Also remove the setting of bio_resid before the
devstat_end_transaction_bio() call. All of the md(4) bio handlers set
bio_resid already.
Reported by: KASAN
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27724
We use a bitmap to track which cylinder groups have changed between
snapshot creation and filesystem suspension. The "legs" of the bitmap
are four bytes wide (see ACTIVESET()) so we must round up the allocation
size to a multiple of four bytes.
I believe this bug is harmless since UMA/kmem_* will both pad the
allocation and zero the full allocation. Note that malloc() does inline
zeroing when the allocation size is known at compile-time.
Reported by: pho (using KASAN)
Reviewed by: kib, mckusick
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27731
Vectored aio will require each aiocb to be associated with multiple
bios, so we can't store a link to the latter from the former. But we
don't really need to. aio_biowakeup already knows the bio it's using,
and the other fields can be stored within the bio and/or buf itself.
Also, remove the unused kaiocb.backend2 field.
Reviewed By: kib
Differential Revision: https://reviews.freebsd.org/D27682
This improves cache behaviour by not writing to the same variable from
multiple cores simultaneously.
pf_state is only used in the kernel, so can be safely modified.
Reviewed by: Lutz Donnerhacke, philip
MFC after: 1 week
Sponsed by: Orange Business Services
Differential Revision: https://reviews.freebsd.org/D27661
The algorithm we use to update checksums only works correctly if the
updated data is aligned on 16-bit boundaries (relative to the start of
the packet).
Import the OpenBSD fix for this issue.
PR: 240416
Obtained from: OpenBSD
MFC after: 1 week
Reviewed by: tuexen (previous version)
Differential Revision: https://reviews.freebsd.org/D27696
And switch from int to bool while at it.
Reviewed by: melifaro@
Differential Revision: https://reviews.freebsd.org/D27725
MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking
I suspect that virtualization techniques improved from the time when we
have to effectively disable TSC use in VM. For instance, it was reported
(complained) in https://github.com/JuliaLang/julia/issues/38877 that
FreeBSD is groundlessly slow on AWS with some loads.
Remove the check and start watching for complaints.
Reviewed by: emaste, grehan
Discussed with: cperciva
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27629
The packet, if processed at this point, was already parsed to be UDP
directed to a vxlan port.
Connect-X 4+ does not provide easy method to infer which parser
processed the packet, so driver cannot set the flag without a lot of
efforts which are only to satisfy the formal requirements.
Reviewed by: bryanv, np
Sponsored by: Mellanox Technologies/NVidia Networking
Differential revision: https://reviews.freebsd.org/D27449
MFC after: 1 week
Otherwise libinput refuses to recoginize some Synaptics touchpads with
"kernel bug: device has min == max on ABS_X" message in Xorg.log.
PR: 251149
Reported-by: Jens Grassel <freebsd-ports@jan0sch.de>
Tested-by: Jens Grassel <freebsd-ports@jan0sch.de>
MFC-after: 2 weeks
Conducted tests showed that Embedded Controller is not mandatory for
WMI extensions to work.
Reported-by: yuripv
Reviewed-by: avg
MFC-after: 2 weeks
Differential-Revision: https://reviews.freebsd.org/D27653
