Commit Graph

51 Commits

Author SHA1 Message Date
Alexander Motin
6d6fccace2 Fix NCQ TRIM emulation.
When this code was written, there was no guests using it to test.
2016-07-17 14:13:47 +00:00
Alexander Motin
3dd7961093 Add emulation for multiple (up to 16) MSI vectors for AHCI.
It was useless before, but may improve performance now if multiple devices
are configured and guest supports this feature.

Sponsored by:	iXsystems, Inc.
2016-07-08 21:30:18 +00:00
Alexander Motin
098f5155d1 Allow AHCI controller to support up to 32 arbitrary devices.
While old syntax is still supported, new syntax looks like this:

-s 3,ahci,hd:/dev/zvol/XXX,hd:/dev/zvol/YYY,cd:/storage/ZZZ.iso

Sponsored by:	iXsystems, Inc.
2016-07-08 21:25:37 +00:00
Enji Cooper
f94fd843f4 Fix gcc warnings
Put cfl/prdt under AHCI_DEBUG #defines as they are only used in
those cases.

Approved by: re (gjb)
Differential Revision: https://reviews.freebsd.org/D7119
MFC after: 1 week
Reported by: Jenkins
Reviewed by: grehan (maintainer)
Sponsored by: EMC / Isilon Storage Division
2016-07-06 04:58:42 +00:00
Marcelo Araujo
59c895f143 Use MIN()/MAX() macros from sys/param.h.
Reviewed by:	grehan
Differential Revision:	https://reviews.freebsd.org/D6054
2016-04-22 06:25:32 +00:00
Pedro F. Giffuni
91e34616df bhyve: Remove unneeded variable ncq.
ncq was not being inititialized properly but it was not actually
necessary either, so make the code smaller by removing it.

CID:		1248842
Reviewed by:	grehan
2016-04-05 19:30:19 +00:00
Marcelo Araujo
305b5a14e4 Cleanup unused-but-set-variable spotted by gcc-4.9.
Reviewed by:	neel
Approved by:	rodrigc (mentor)
Differential Revision:	https://reviews.freebsd.org/D5042
2016-01-26 07:17:21 +00:00
Peter Grehan
45b3ff5f61 Clean up some harmless unimplemented-command warning messages.
- Don't advertize trusted-computing capability in the Identify page.
  This prevents Windows from issuing a TRUSTED_RECEIVE_DMA command.
- Windows will send down SMART and SECURITY_FREEZE_LOCK
   even though smart and security capabilities were not advertized.
   Send back a silent abort.

Reviewed by:	mav
2015-10-05 14:57:45 +00:00
Peter Grehan
7a40703db9 Add simple (no-op) emulations for the CHECK_POWER_MODE,
READ_VERIFY and READ_VERIFY_EXT commands.

Reviewed by:	mav
2015-08-17 05:59:36 +00:00
Neel Natu
1cba333329 Allow byte reads of AHCI registers.
This is needed to support Windows guests that use byte reads to access certain
AHCI registers (e.g. PxTFD.Status and PxTFD.Error).

Reviewed by:	grehan, mav
Reported by:	Leon Dang (ldang@nahannisys.com)
Differential Revision:	https://reviews.freebsd.org/D2469
MFC after:	2 weeks
2015-05-07 18:35:15 +00:00
Alexander Motin
5b3ee130e3 Reimplement queue freeze on error, added in r282429:
It is not required to use CLO to recover from task file error, it should
be enough to do only stop/start, that does not clear the PxTFD.STS.ERR.

MFC after:	13 days
2015-05-06 09:59:19 +00:00
Alexander Motin
b208a147b9 Implement in-order execution of non-NCQ commands.
Using status updates in r282364, block queue on BSY, DRQ or ERR bits set.
This can be a performance penalization for non-NCQ commands, but it is
required for proper error recovery and standard compliance.

MFC after:	2 weeks
2015-05-04 19:55:01 +00:00
Alexander Motin
9dba9460d9 Implement basic PxTFD.STS.BSY reporting.
MFC after:	2 weeks
2015-05-03 07:43:58 +00:00
Alexander Motin
1025d8e679 Initialize PxCMD on reset and make its read-only bits such.
MFC after:	2 weeks
2015-05-02 16:11:29 +00:00
Alexander Motin
52f224dfbf Handle ATA_SEND_FPDMA_QUEUED as NCQ in ahci_port_stop().
MFC after:	1 week
2015-05-02 14:43:37 +00:00
Alexander Motin
fdd86701e5 Don't set bits that should be zero for SATA devices.
Old value made Linux think that it is PATA device with SATA bridge.

MFC after:	2 weeks
2015-04-20 19:11:27 +00:00
Alexander Motin
bb1524af0c Workaround bhyve virtual disks operation on top of GEOM providers.
GEOM does not support scatter/gather lists in its I/Os.  Such requests
are cut in pieces by physio(), that may be problematic, if those pieces
are not multiple of provider's sector size.  If such case is detected,
move the data through temporary sequential buffer.

MFC after:	2 weeks
2015-04-18 20:10:19 +00:00
Alexander Motin
0990a33089 Make virtual AHCI more careful with I/O lengths.
MFC after:	2 weeks
2015-04-17 20:20:55 +00:00
Alexander Motin
8187174a9b Add missing variable initialization.
Reported by:	Coverity
CID:		1288938
MFC after:	3 days
2015-03-20 16:05:13 +00:00
Alexander Motin
e72d4950e1 Give AHCI disk serial based on backing file path same as for virtio block.
It is still not good that they may intersect on different hosts, but that
is better then intersecting on the same host.

MFC after:	2 weeks
2015-03-15 15:29:03 +00:00
Alexander Motin
7e8e553940 Block delete capability for read-only devices.
Submitted by:	neel
MFC after:	2 weeks
2015-03-15 08:09:56 +00:00
Alexander Motin
df57ec4933 Add checksums to identify data and NCQ command error log.
MFC after:	2 weeks
2015-03-14 14:06:37 +00:00
Alexander Motin
b441dabf7e Slightly polish virtual AHCI CD reporting.
MFC after:	2 weeks
2015-03-14 12:18:26 +00:00
Alexander Motin
fb329df8e4 Fix NOP and IDLE commands for virtual AHCI disks.
MFC after:	2 weeks
2015-03-14 10:38:25 +00:00
Alexander Motin
1fcb801948 Add support for NCQ variant of DSM TRIM for virtual AHCI disks.
The code is not really tested yet due to lack of initiator support.

Requested by:	imp
MFC after:	2 weeks
2015-03-14 09:46:43 +00:00
Alexander Motin
9009f43407 Improve NCQ errors reporting for virtual AHCI disks.
While this implementation is still not perfect, previous was just broken.

MFC after:	2 weeks
2015-03-14 08:45:54 +00:00
Alexander Motin
dcd0c998a9 Remove incorrect SERR register setting.
At this point we have nothing to report through that register.

MFC after:	2 weeks
2015-03-13 21:01:25 +00:00
Alexander Motin
9463f47b3a Change prdbc value reporting.
MFC after:	2 weeks
2015-03-13 20:56:17 +00:00
Alexander Motin
295e61d6a3 Polish AHCI disk identify data and fix speed negotiation.
MFC after:	2 weeks
2015-03-13 20:14:35 +00:00
Alexander Motin
5f6b63de7a Add support for PIO variants of READ/WRITE commands for AHCI disks.
AHCI API hides all PIO specifics, so this functionality is almost free.

MFC after:	2 weeks
2015-03-13 18:35:38 +00:00
Alexander Motin
f7c5bc2cfe Use ahci_write_fis_d2h() for commands completion.
MFC after:	2 weeks
2015-03-13 18:04:07 +00:00
Alexander Motin
0b9d25c935 Add DSM TRIM command support for virtual AHCI disks.
It works only for virtual disks backed by ZVOLs and raw devices supporting
BIO_DELETE.  Virtual disks backed by files won't report this capability.

MFC after:	2 weeks
Relnotes:	yes
2015-03-13 16:43:52 +00:00
Alexander Motin
94682383d9 Report logical/physical sector sizes for virtual SATA disk.
MFC after:	2 weeks
2015-03-05 12:21:12 +00:00
Peter Grehan
65392c66a5 Don't close a block context if it couldn't be opened,
for example if the backing file doesn't exist,
avoiding a null deref.

Reviewed by:	neel
MFC after:	1 week.
2015-02-23 22:31:39 +00:00
Tycho Nightingale
26bf96112b If the start bit, PxCMD.ST, is cleared and nothing is in-flight then
PxCI, PxSACT, PxCMD.CCS and PxCMD.CR should be 0.

Reviewed by:	grehan
2014-11-03 12:55:31 +00:00
Tycho Nightingale
3ef05c4677 Support stopping and restarting the AHCI command list via toggling
PxCMD.ST from '1' to '0' and back.  This allows the driver a chance to
recover if for instance a timeout occurred due to activity on the
host.

Reviewed by:	grehan
2014-10-17 11:37:50 +00:00
Tycho Nightingale
42404fae46 Commands which encounter a fatal error shouldn't be marked as completed.
Furthermore, provide an indication of the current command so it can be
determined which one actually failed.

Reviewed by:	grehan
2014-07-30 18:47:31 +00:00
Peter Grehan
ad15140ee7 Use the blockif CHS routine to create fake CHS values,
and then populate them in the identity page.

This fixes a divide-by-zero error at probe time with NetBSD.

MFC after:	1 week.
2014-07-15 00:27:08 +00:00
Peter Grehan
67e1705297 Implement legacy interrupts for the AHCI device emulation
according to the method outlined in the AHCI spec.

Tested with FreeBSD 9/10/11 with MSI disabled,
and also NetBSD/amd64 (lightly).

Reviewed by:	neel, tychon
MFC after:	3 weeks
2014-04-28 18:41:25 +00:00
Xin LI
994f858a8b Use calloc() in favor of malloc + memset.
Reviewed by:	neel
2014-04-22 18:55:21 +00:00
Tycho Nightingale
8b4a7f857b Constrain the amount of data returned to what is actually available
not the size of the buffer.

Approved by:	grehan (co-mentor)
2014-04-09 14:50:55 +00:00
Tycho Nightingale
4feac03f2c Don't reissue in-flight commands.
Approved by:	neel (co-mentor)
2014-03-18 23:25:35 +00:00
Tycho Nightingale
7292923b49 Though there currently isn't a way to insert new media into an ATAPI
drive, at least pretend to support Asynchronous Notification (AN) to
avoid a guest needlessly polling for it.

Approved by:	grehan (co-mentor)
2014-03-16 12:33:40 +00:00
Tycho Nightingale
2a261121af Provide an indication a "PIO Setup Device to Host FIS" occurred while executing
the IDENTIFY DEVICE and IDENTIFY PACKET DEVICE commands.

Also, provide an indication a "D2H Register FIS" occurred during a SET FEATURES
command.

Approved by:	grehan (co-mentor)
2014-02-12 00:32:14 +00:00
Tycho Nightingale
4e5f86e009 Fix issue with stale fields from a recycled request pulled off the freelist.
Approved by:	grehan (co-mentor)
2014-01-22 01:57:52 +00:00
Peter Grehan
4b48ea6ab2 The Data Byte Count (DBC) field of a Physical Region Descriptor
Table is 22 bits, with the bit 31 being the interrupt-on-completion
bit.

OpenBSD and UEFI set this bit, resulting in large block i/o lengths
being sent to bhyve and coredumping the process. Fix by masking off
the relevant 22 bits when using the DBC field as a length.

Reviewed by:	Zhixiang Yu
Discussed with:	Tycho Nightingale (tycho.nightingale@pluribusnetworks.com)
MFC after:	10.0
2013-11-26 03:00:54 +00:00
Peter Grehan
7f5487aca1 Add the VM name to the process name with setproctitle().
Remove the VM name from some of the thread-naming calls
since it is now in the proc title.
Slightly modify the thread-naming for the net and block
threads.

This improves readability when using top/ps with the -a
and -H options on a system with a large number of bhyve VMs.

Requested by:	Michael Dexter
Reviewed by:	neel
MFC after:	4 weeks
2013-11-06 00:25:17 +00:00
Peter Grehan
10016ed51c Fix AHCI ATAPI emulation when backed with /dev/cd0
- remove assumption that the backing file/device had
  512-byte sectors
- fix incorrect iovec size variable that would result
  in a buffer overrun when an o/s issued an i/o request
  with more s/g elements than the blockif api

Reviewed by:	Zhixiang Yu (zxyu.core@gmail.com)
MFC after:	3 days
2013-10-22 19:55:04 +00:00
Peter Grehan
7b8d7047af Eliminate unconditional debug printfs.
Linux writes to these nominally read-only registers,
so avoid having bhyve write warning messages to stdout
when the reg writes can be safely ignored. Change the
WPRINTF to DPRINTF which is conditional.

Reviewed by:	mav
Discussed with:	mav, Zhixiang Yu
MFC after:	3 days
2013-10-17 21:56:39 +00:00
Dimitry Andric
cdb9cd7ad2 In usr.sbin/bhyve/pci_ahci.c, fix several gcc warnings of the form
"assignment makes pointer from integer without a cast", by changing the
cmd_lst and rbis members of struct ahci_port from integers to pointers.

Also surround a pow-of-2 test expression with parentheses to clarify it,
and avoid another gcc warning.

Approved by:	re (glebius)
Reviewed by:	grehan, mav
2013-10-08 19:39:21 +00:00