|I made ctm ignore deltas for files that match the "after edit" MD5.
|(In one case, I had the compiler fill all temporary space while CTM
|was editing files.)
Submitted by: se
Reviewed by: phk
Changes are:
- rpc.umntall is called at the right places now in /etc/rc*
- rpc.umntall timeout has been lowered from two days (too high) to one
- verbose messages in rpc.umntall have been clarified
- kill double entries in /var/db/mounttab when rpc.umntall is invoked
- ${early_nfs_mounts} has been removed from /etc/rc
- patched mount(8) -p to print different pass/dump values for ufs filesystems.
(last patch recieved from dan <bugg@bugg.strangled.net>)
Submitted by: Martin Blapp <mbr@imp.ch>, dan <bugg@bugg.strangled.net>
NICs. (Finally!) The PCMCIA, ISA and PCI varieties are all supported,
though only the ISA and PCI ones will work on the alpha for now.
PCCARD, ISA and PCI attachments are all provided. Also provided an
ancontrol(8) utility for configuring the NIC, man pages, and updated
pccard.conf.sample. ISA cards are supported in both ISA PnP and hard-wired
mode, although you must configure the kernel explicitly to support the
hardwired mode since you have to know the I/O address and port ahead
of time.
Special thanks to Doug Ambrisko for doing the initial newbus hackery
and getting it to work in infrastructure mode.
vogons, set the size of the receive buffer to 1 and rely on the kernel to
simply drop incoming packets. The logging code was buggy anyway.
Use socklen_t instead of int for the length argument to recvfrom.
Add a 'continue' at the end of a loop for ANSI conformance.
USB-EL1202A chipset. Between this and the other two drivers, we should
have support for pretty much every USB ethernet adapter on the market.
The only other USB chip that I know of is the SMC USB97C196, and right
now I don't know of any adapters that use it (including the ones made
by SMC :/ ).
Note that the CATC chip supports a nifty feature: read and write combining.
This allows multiple ethernet packets to be transfered in a single USB
bulk in/out transaction. However I'm again having trouble with large
bulk in transfers like I did with the ADMtek chip, which leads me to
believe that our USB stack needs some work before we can really make
use of this feature. When/if things improve, I intend to revisit the
aue and cue drivers. For now, I've lost enough sanity points.
in favour of placing information in the correct sections.
The ntp_acc(8), ntp_auth(8), ntp_clock(8), ntp_conf(8),
ntp_misc(8) and ntp_mon(8) pages have been merged into
ntp.conf(5) and ntp.keys(5).
Requested by: rgrimes, wollman
don't have an interface index that's the same as the if_msghdr
interface index.
This prevents the occasional perror("SIOCGIFFLAGS") from appearing
at boot time.
While I'm there:
Make a couple of error messages more useful.
Add a missing include.
Add some braces to silence gccs dumb complaints.
Add some consts
Ansify decls
Add copyright to pmap_check.h (well, you could say it's been rewritten)
Those pages which have not been transcribed are referenced as
gracefully as possible.
There is no perfect section for the ntp_* files, which document
configuration options for the NTP suite, so I'm putting them in
the same section as the pages for the utilities themselves.
instead of -2. This (I believe) caused static wirings to not match.
This should fix Bill Pechter's problem but we'll see.
Problem discovered by: Bill Pechter <pechter@shell.monmouth.com>
o Realloc memory leak fixed which won't matter but would trigger purify
o Default to sendmail when no mailer.conf exists.
Fixed bugs in OpenBSD version:
o Add NULL termination in the right place.
Also put back the err. free shouldn't touch errno.
Pointed out by: theo de raadt (except the NULL bug :-)
a string containign 'J'.
o Properly terminate argv list with a NULL entry.
o Use warn() to report the exec failure because free could change errno and
err would report the wrong reason.
o Don't terminate string to err with ':' since this results in two colons.
getipnodebyaddr().
This resolve 2 problems.
-can specify scope index(@ifname) for IPv6 link local addr
-reverse lookup for IPv6 loopback addr(::1) was strange, but fixed
This would mean that we could move files.alpha, files.i386, files.pc98
etc all next to conf/files, and the various Makefiles next to each
other. This should go a long way towards committers "seeing" the
Alpha etc stuff and remembering to update that too as it would be
right next to the i386 config files. Note this does not include
the GENERIC etc files as they can't be shared. I haven't actually
moved the files, but the support is here for it. It still supports
the per-machine conf directories so that folks working on a new arch
can just distribute a subdir of files.
- redo the "at" configuration system so that it just syntax checks
to make sure the device you're configuring something "at" appears to
exist. Nuke a bunch of complexity that was responsible for creating
"clones" of wildcard devices and some wierd stuff in a few places
including the scbus config tables etc.
- merge "controller" and "device" - there is no difference as far as
the kernel is concernend, it's just something there to make life
difficult for config file writers. "controller" is now an alias for
"device".
- emit full scsi config into the resource tables. We could trivially
change cam to use that rather than it's own "special" table for wiring
and static configuration. ATA could use this too for static wiring.
- try and emulate some of the quirks of the old system where it made
sense. Some were too strange though and I'd be very suprised if they
were features and not outright bugs. nexus handling is still strange.
One thing in particular is that some of the wierd entries in the
newbus devtables is now gone as it was a quirk side effect of the
wildcard/question-mark cloning above.
GENERIC and LINT still build etc.
known option, unknown options following the known option were not
removed. Now I think only unknown options in unknown options files
are not removed. This is harmless because unknown options files should
not be used, but removing the files would be cleaner.
Kawasaki LSI KL5KUSB101B chip, including the LinkSys USB10T, the
Entrega NET-USB-E45, the Peracom USB Ethernet Adapter, the 3Com
3c19250 and the ADS Technologies USB-10BT. This device is 10mbs
half-duplex only, so there's miibus or ifmedia support. This device
also requires firmware to be loaded into it, however KLSI allows
redistribution of the firmware images (I specifically asked about
this; they said it was ok).
Special thanks to Annelise Anderson for getting me in touch with
KLSI (eventually) and thanks to KLSI for providing the necessary
programming info.
Highlights:
- Add driver files to /sys/dev/usb
- update usbdevs and regenerate attendate files
- update usb_quirks.c
- Update HARDWARE.TXT and RELNOTES.TXT for i386 and alpha
- Update LINT, GENERIC and others for i386, alpha and pc98
- Add man page
- Add module
- Update sysinstall and userconfig.c
o s/unsigned/unsigned int/g
o Add -Wall
btxld can now be built as a cross-tool for cross-building i386/pc98 on
platforms that don't have btxld (such as alpha).
passed to libalias. If there's not enough space, things like ftp
PORT commands start failing....
Reported by: Gianmarco Giovannelli <gmarco@giovannelli.it>
4096 - sizeof struct mbuf, and set MAX_MRU and MAX_MTU
back to 2048.
2048 is big enough as an MTU/MRU, but we need to be able
to allocate larger mbufs after reassembling IP fragments.
twice (once for the arg parsing and once to make it a normal character).
Make the man page example consistent.
Reminded by: Bryan Liesner <bleez@netaxs.com>
would leave you with a broken sendmail and local mail loss.
This evil hack moves sendmail.cf from the old location to the new one (if
required) at install time.
is an application space macro and the applications are supposed to be free
to use it as they please (but cannot). This is consistant with the other
BSD's who made this change quite some time ago. More commits to come.
(1)added error check of if_nameindex() return value at getaddrinfo().
(2)print out more detailed information when getaddrinfo() error value
is EAI_SYSTEM.(in this case system error num is kept in errno)
(1) is Discovered by: jinmei@kame.net in KAME environment.
USB ethernet chip. Adapters that use this chip include the LinkSys
USB100TX. There are a few others, but I'm not certain of their
availability in the U.S. I used an ADMtek eval board for development.
Note that while the ADMtek chip is a 100Mbps device, you can't really
get 100Mbps speeds over USB. Regardless, this driver uses miibus to
allow speed and duplex mode selection as well as autonegotiation.
Building and kldloading the driver as a module is also supported.
Note that in order to make this driver work, I had to make what some
may consider an ugly hack to sys/dev/usb/usbdi.c. The usbd_transfer()
function will use tsleep() for synchronous transfers that don't complete
right away. This is a problem since there are times when we need to
do sync transfers from an interrupt context (i.e. when reading registers
from the MAC via the control endpoint), where tsleep() us a no-no.
My hack allows the driver to have the code poll for transfer completion
subject to the xfer->timeout timeout rather that calling tsleep().
This hack is controlled by a quirk entry and is only enabled for the
ADMtek device.
Now, I'm sure there are a few of you out there ready to jump on me
and suggest some other approach that doesn't involve a busy wait. The
only solution that might work is to handle the interrupts in a kernel
thread, where you may have something resembling a process context that
makes it okay to tsleep(). This is lovely, except we don't have any
mechanism like that now, and I'm not about to implement such a thing
myself since it's beyond the scope of driver development. (Translation:
I'll be damned if I know how to do it.) If FreeBSD ever aquires such
a mechanism, I'll be glad to revisit the driver to take advantage of
it. In the meantime, I settled for what I perceived to be the solution
that involved the least amount of code changes. In general, the hit
is pretty light.
Also note that my only USB test box has a UHCI controller: I haven't
I don't have a machine with an OHCI controller available.
Highlights:
- Updated usb_quirks.* to add UQ_NO_TSLEEP quirk for ADMtek part.
- Updated usbdevs and regenerated generated files
- Updated HARDWARE.TXT and RELNOTES.TXT files
- Updated sysinstall/device.c and userconfig.c
- Updated kernel configs -- device aue0 is commented out by default
- Updated /sys/conf/files
- Added new kld module directory
