NULL, but also can point to dead vnode, take that into account.
PR: kern/132068
Reported by: Edward Fisk" <7ogcg7g02@sneakemail.com>, kris
Fix based on patch from: Jaakko Heinonen <jh@saunalahti.fi>
MFC after: 1 week
commands executed by unprivileged users. Action is not really taken, but it is
logged to pool history, which might be confusing.
Reported by: Denis Ahrens <denis@h3q.com>
MFC after: 3 days
Such situation is not supported.
This problem was triggered by something like this:
# zpool create tank da0
# zfs snapshot tank@snap
# cd /tank/.zfs/snapshot/snap (this will mount the snapshot)
# cd
# mount -u nosuid /tank/.zfs/snapshot/snap (refcount leak)
# zpool export tank
cannot export 'tank': pool is busy
MFC after: 1 week
we will fail to unmount it, but it won't be removed from the tree,
so in that case there is no need to reinsert it.
This fixes a panic reproducable in the following steps:
# zfs create tank/foo
# zfs snapshot tank/foo@snap
# cd /tank/foo/.zfs/snapshot/snap
# umount /tank/foo
panic: avl_find() succeeded inside avl_add()
Reported by: trasz
MFC after: 3 days
provider is closed should be ok.
When administrator requests to change ZVOL size do it immediately if ZVOL
is closed or do it on last ZVOL close.
PR: kern/136942
Requested by: Bernard Buri <bsd@ask-us.at>
MFC after: 1 week
will always return failure. Fix this by bringing userland implementation of
xdrmem_control() back. This allow 'zpool import' to work again.
Reported by: Thomas Backman <serenity@exscape.org>
Reviewed by: kmacy
Approved by: re (kib)
(..), calling readdir and looking for previous directory inode. In case of
.zfs/ directory this doesn't work, because .zfs/ is hidden by default, so it
won't be visible in readdir output.
Fix this by implementing VPTOCNP for snapshot directories, so __getcwd()
doesn't fail and getcwd() doesn't have to use readdir method.
This fixes /bin/pwd from within .zfs/snapshot/<name>/.
Suggested by: kib
Approved by: re (rwatson)
replace it with wrappers around our taskqueue(9).
To make it possible implement taskqueue_member() function which returns 1
if the given thread was created by the given taskqueue.
Approved by: re (kib)
initialized. Also destroy /dev/zfs before doing other deinitializations.
- Initialization through taskq is no longer needed and there is a race
where one of the zpool/zfs command loads zfs.ko and tries to do some work
immediately, but /dev/zfs is not there yet.
Reported by: pav
Approved by: re (kib)
panic when in zfs_fuid_create_cred() when userid is negative. It is
converted to unsigned value which makes IS_EPHEMERAL() macro to
incorrectly report that this is ephemeral ID. The most reasonable
solution for now is to always report that the given ID is not ephemeral.
PR: kern/132337
Submitted by: Matthew West <freebsd@r.zeeb.org>
Tested by: Thomas Backman <serenity@exscape.org>, Michael Reifenberger <mike@reifenberger.com>
Approved by: re (kib)
MFC after: 2 weeks
doesn't exist and user doesn't have write access to the file.
Without this fix, it returns bogus value instead of 0. For some
reason this didn't manifest on my kernel compiled with -O0.
PR: kern/136601
Submitted by: Jaakko Heinonen <jh at saunalahti dot fi>
Approved by: re (kib)
this change, ZFS uses SunOS Alternate Data Streams semantics - each
EA has its own permissions, which are set at EA creation time
and - unlike SunOS - invisible to the user and impossible to change.
From the user point of view, it's just broken: sometimes access
is granted when it shouldn't be, sometimes it's denied when
it shouldn't be.
This patch makes it behave just like UFS, i.e. depend on current
file permissions. Also, it fixes returned error codes (ENOATTR
instead of ENOENT) and makes listextattr(2) return 0 instead
of EPERM where there is no EA directory (i.e. the file never had
any EA).
Reviewed by: pjd (idea, not actual code)
Approved by: re (kib)
Currently dtrace_gethrtime uses formula similar to the following for
converting TSC ticks to nanoseconds:
rdtsc() * 10^9 / tsc_freq
The dividend overflows 64-bit type and wraps-around every 2^64/10^9 =
18446744073 ticks which is just a few seconds on modern machines.
Now we instead use precalculated scaling factor of
10^9*2^N/tsc_freq < 2^32 and perform TSC value multiplication separately
for each 32-bit half. This allows to avoid overflow of the dividend
described above.
The idea is taken from OpenSolaris.
This has an added feature of always scaling TSC with invariant value
regardless of TSC frequency changes. Thus the timestamps will not be
accurate if TSC actually changes, but they are always proportional to
TSC ticks and thus monotonic. This should be much better than current
formula which produces wildly different non-monotonic results on when
tsc_freq changes.
Also drop write-only 'cp' variable from amd64 dtrace_gethrtime_init()
to make it identical to the i386 twin.
PR: kern/127441
Tested by: Thomas Backman <serenity@exscape.org>
Reviewed by: jhb
Discussed with: current@, bde, gnn
Silence from: jb
Approved by: re (gnn)
MFC after: 1 week
PCATCH, to indicate that thread shall not be stopped upon receipt of
SIGSTOP until it reaches the kernel->usermode boundary.
Also change thread_single(SINGLE_NO_EXIT) to only stop threads at
the user boundary unconditionally.
Tested by: pho
Reviewed by: jhb
Approved by: re (kensmith)
The programmer was aware that alignment was not guaranteed in the
packed structure and used bzero() to NULL out the pointers.
However, on ia64, the compiler is quite agressive in finding ILP
and calls to bzero() are often replaced by simple assignments (i.e.
stores). Especially when the width or size in question corresponds
with a store instruction (i.e. st1, st2, st4 or st8).
The problem here is not a compiler bug. The address of the memory
to zero-out was given by '&packed->nvl_priv' and given the type of
the 'packed' pointer the compiler could assume proper alignment for
the replacement of bzero() with an 8-byte wide store to be valid.
The problem is with the programmer. The programmer knew that the
address did not have the alignment guarantees needed for a regular
assignment, but failed to inform the compiler of that fact. In
fact, the programmer told the compiler the opposite: alignment is
guaranteed.
The fix is to avoid using a pointer of type "nvlist_t *" and
instead use a "char *" pointer as the basis for calculating the
address. This tells the compiler that only 1-byte alignment can
be assumed and the compiler will either keep the bzero() call
or instead replace it with a sequence of byte-wise stores. Both
are valid.
Approved by: re (kib)
On amd64 KERNBASE/kernbase does not mean start of kernel memory.
This should fix a KASSERT panic in dtrace_copycheck when copyin*()
is used in D program.
Also make checks for user memory a bit stricter.
Reported by: Thomas Backman <serenity@exscape.org>
Submitted by: wxs (kaddr part)
Tested by: Thomas Backman (prototype), wxs
Reviewed by: alc (concept), jhb, current@
Aprroved by: jb (concept)
MFC after: 2 weeks
PR: kern/134408
vn_open_cred invocations shall not audit namei path.
In particular, specify VN_OPEN_NOAUDIT for dotdot lookup performed by
default implementation of vop_vptocnp, and for the open done for core
file. vn_fullpath is called from the audit code, and vn_open there need
to disable audit to avoid infinite recursion. Core file is created on
return to user mode, that, in particular, happens during syscall return.
The creation of the core file is audited by direct calls, and we do not
want to overwrite audit information for syscall.
Reported, reviewed and tested by: rwatson
by prefetched than helped. On i386 systems and systems with less than 4GB,
prefetch is now disabled by default. I've added a prefetch enable tunable, to
enable prefetching for those systems. The prefetch disable tunable will continue
to unconditionally disable prefetching.
