check it for MT_CONTROL type too, otherwise the assertion
"m->m_type == MT_DATA" below may be triggered by the following scenario:
- the sender sends some data (MT_DATA) and then a file descriptor
(MT_CONTROL);
- the receiver calls recv(2) with a MSG_WAITALL asking for data larger
than the receive buffer (uio_resid > hiwat).
MFC after: 2 week
1. Process A pdfork(2)s process B.
2. Process A passes process descriptor of B to unrelated process C.
3. Hit CTRL+C to terminate process A. Process B is also terminated
with SIGINT.
4. init(8) collects status of process B.
5. Process C closes process descriptor associated with process B.
When we have such order of events, init(8), by collecting status of
process B, will call procdesc_reap(). This function sets pd_proc to NULL.
Now when process C calls close on this process descriptor,
procdesc_close() is called. Unfortunately procdesc_close() assumes that
pd_proc points at a valid proc structure, but it was set to NULL earlier,
so the kernel panics.
The patch also adds setting 'p->p_procdesc' to NULL in procdesc_reap(),
which I think should be done.
MFC after: 1 week
handler and not more statically.
Unfortunately, it seems that this is not ideal for new platform bringup
and boot low level development (which needs ktr_cpumask to be effective
before tunables can be setup).
Because of this, add a way to statically initialize cpusets, by passing
an list of initializers, divided by commas. Also, provide a way to enforce
an all-set mask, for above mentioned initializers.
This imposes some differences on how KTR_CPUMASK is setup now as a
kernel option, and in particular this makes the words specifications
backward wrt. what is currently in -CURRENT. In order to avoid mismatches
between KTR_CPUMASK definition and other way to setup the mask
(tunable, sysctl) and to print it, change the ordering how
cpusetobj_print() and cpusetobj_scan() acquire the words belonging
to the set.
Please give a look to sys/conf/NOTES in order to understand how the
new format is supposed to work.
Also, ktr manpages will be updated shortly by gjb which volountereed
for this.
This patch won't be merged because it changes a POLA (at least
from the theoretical standpoint) and this is however a patch that
proves to be effective only in development environments.
Requested by: rpaulo
Reviewed by: jeff, rpaulo
other CPUs doesn't require locking so get rid of it. As the latter is used
for the timecounter on certain machine models, using a spin lock in this
case can lead to a deadlock with the upcoming callout(9) rework.
- Merge r134227/r167250 from x86:
Avoid cross-IPI SMP deadlock by using the smp_ipi_mtx spin lock not only
for smp_rendezvous_cpus() but also for the MD cache invalidation and TLB
demapping IPIs.
- Mark some unused function arguments as such.
MFC after: 1 week
for getvfsbyname(3) operation when called from 32bit process, and
getvfsbyname(3) is used by recent bsdtar import.
Reported by: many
Tested by: David Naylor <naylor.b.david@gmail.com>
MFC after: 5 days
"device_free_softc()" and "device_claim_softc()",
to allow USB serial drivers refcounting the softc.
These functions are used to grab the softc from
auto-free and to free the softc back to the correct
malloc type, respectivly.
Discussed with: jhb
MFC after: 2 weeks
8 or more cores to improve utilization. None of my tests on 2xXeon (2x6x2)
system shown any slowdown from mentioned "excess thrashing". Same time in
pbzip2 test with number of threads more then number of CPUs I see up to 10%
speedup with SMT disabled and up 5% with SMT enabled. Thinking about
trashing I was trying to limit that stealing within same last level cache,
but got only worse results. Present code any way prefers to steal threads
from topologically closer cores.
Sponsored by: iXsystems, Inc.
- remove extra dynamic variable initializations;
- restore (4BSD) and implement (ULE) hogticks variable setting;
- make sched_rr_interval() more tolerant to options;
- restore (4BSD) and implement (ULE) kern.sched.quantum sysctl, a more
user-friendly wrapper for sched_slice;
- tune some sysctl descriptions;
- make some style fixes.
allocated softc structure which is returned by
device_get_softc(). This method can be used to
easily implement softc refcounting. This can be
desirable when the softc has memory references
which are controlled by userspace handles for
example.
This solves the problem of blocking the caller
of device_detach() for a non-deterministic time.
Discussed with: kib, ed
MFC after: 2 weeks
the wrong direction. Before it, if preemption and end of time slice happen
same time, thread was put to the head of the queue as for only preemption.
It could cause single thread to run for indefinitely long time. r220198
handles it by not clearing TDF_NEEDRESCHED in case of preemption. But that
causes delayed context switch every time preemption happens, even when not
needed.
Solve problem by introducing scheduler-specifoc thread flag TDF_SLICEEND,
set when thread's time slice is over and it should be put to the tail of
queue. Using SW_PREEMPT flag for that purpose as it was before just not
enough informative to work correctly.
On my tests this by 2-3 times reduces run time deviation (improves fairness)
in cases when several threads share one CPU.
Reviewed by: fabient
MFC after: 2 months
Sponsored by: iXsystems, Inc.
With switchticks variable being reset each time thread preempted (that is
done regularly by interrupt threads) scheduling quantum may never expire.
It was not noticed in time because several other factors still regularly
trigger context switches.
Handle the problem by replacing that mechanism with its equivalent from
SCHED_ULE called time slice. It is effectively the same, just measured in
context of stathz instead of hz. Some unification is probably not bad.
In rare event when fast and ithread interrupts share the same vector
and the fast handler was registered first, we can end up trying to
schedule the ithread that is not created yet. The kernel built with
INVARIANTS then triggers an assertion.
Change the order to create the ithread first and only then add the
handler that needs it to the interrupt event handlers list.
Reviewed by: jhb
to pull vm_param.h was removed. Other big dependency of vm_page.h on
vm_param.h are PA_LOCK* definitions, which are only needed for
in-kernel code, because modules use KBI-safe functions to lock the
pages.
Stop including vm_param.h into vm_page.h. Include vm_param.h
explicitely for the kernel code which needs it.
Suggested and reviewed by: alc
MFC after: 2 weeks
Fix an issue related to old periodic timers. The code in kern_clocksource.c
uses interrupt to keep track of time, and this time may not match with
binuptime(). In order to address such incoherency, switch periodic timers
to binuptime().
Except further calloutng it is needed for already present cyclic subsystem.
lock is obtained before the write count is increased during open() and the
lock is released after the write count is decreased during close().
The first change closes a race where an open() that will block with O_SHLOCK
or O_EXLOCK can increase the write count while it waits. If the process
holding the current lock on the file then tries to call exec() on the file
it has locked, it can fail with ETXTBUSY even though the advisory lock is
preventing other threads from succesfully completeing a writable open().
The second change closes a race where a read-only open() with O_SHLOCK or
O_EXLOCK may return successfully while the write count is non-zero due to
another descriptor that had the advisory lock and was blocking the open()
still being in the process of closing. If the process that completed the
open() then attempts to call exec() on the file it locked, it can fail with
ETXTBUSY even though the other process that held a write lock has closed
the file and released the lock.
Reviewed by: kib
MFC after: 1 month
I found 8.3 is a history BSD version using socket to implement FIFO
pipe, it uses per-file seqcount to compare with writer generation
stored in per-pipe object. The concept is after all writers are gone,
the pipe enters next generation, all old readers have not closed the
pipe should get the indication that the pipe is disconnected, result
is they should get EPIPE, SIGPIPE or get POLLHUP in poll().
But newcomer should not know that previous writters were gone, it
should treat it as a fresh session.
I am trying to bring back FIFO pipe to history behavior. It is still
unclear that if single EOF flag can represent SBS_CANTSENDMORE and
SBS_CANTRCVMORE which socket-based version is using, but I have run
the poll regression test in tool directory, output is same as the one
on 8.3-STABLE now.
I think the output "not ok 18 FIFO state 6b: poll result 0 expected 1.
expected POLLHUP; got 0" might be bogus, because newcomer should not
know that old writers were gone. I got the same behavior on Linux.
Our implementation always return POLLIN for disconnected pipe even it
should return POLLHUP, but I think it is not wise to remove POLLIN for
compatible reason, this is our history behavior.
Regression test: /usr/src/tools/regression/poll
flag but not PIPE_WANTW, but FIFO pipe code does not understand this internal
state, when a FIFO peer reader closes the pipe, it wants to notify the writer,
it checks PIPE_WANTW, if not set, it skips calling wakeup(), so blocked writer
never noticed the case, but in general, the writer should return from the
syscall with EPIPE error code and may get SIGPIPE signal. Setting the
PIPE_WANTW fixed problem, or you can turn off direct write, it should fix the
problem too. This bug is found by PR/170203.
Another bug in FIFO pipe code is when peer closes the pipe, another end which
is being blocked in select() or poll() is not notified, it missed to call
pipeselwakeup().
Third problem is found in poll regression test, the existing code can not
pass 6b,6c,6d tests, but FreeBSD-4 works. This commit does not fix the
problem, I still need to study more to find the cause.
PR: 170203
Tested by: Garrett Copper < yanegomi at gmail dot com >
ktr(4), was constrained to be a power of two. Remove this constraint and
update sys/conf/NOTES accordingly.
Reviewed by: jhb
Approved by: gnn (mentor)
Sponsored by: Google Summer of Code 2012
Append '__' prefix to the tag of struct oflock, and put it under BSD
namespace. Structure is needed both by libc and kernel, thus cannot be
hidden under #ifdef _KERNEL.
Move a set of non-standard F_* and O_* constants into BSD namespace.
SUSv4 explicitely allows implemenation to pollute F_* and O_* names
after fcntl.h is included, but it costs us nothing to adhere
to the specification if exact POSIX compliance level is requested by
user code.
Change some spaces after #define to tabs.
Noted by and discussed with: bde
MFC after: 1 week
ELF parser. Specifically, do not allow note reader and interpreter
path comparision in the brandelf code to read past end of the page.
This may happen if specially crafter ELF image is activated.
Submitted by: Lukasz Wojcik <lukasz.wojcik zoho com>
MFC after: 3 days
