and ACPI. As such pull out what will be the common parts of the FDT cpu
detection to a new function that can be shared between them.
Reviewed by: manu
Obtained from: ABT Systems Ltd
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D7262
The ELF e_phnum field is only 16 bits wide. To support more than 65535 segments
(program headers), Sun's "Linker and Libraries Guide" table 7-7 (or 12-7,
depending on document version) prescribes a special first section header where
sh_info represents the real number of program headers.
Test code to follow, when it is ready.
Reference: http://docs.oracle.com/cd/E18752_01/pdf/817-1984.pdf
Reviewed by: emaste, markj
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D7255
before UFS_BALLOC() is called. I do not believe that this caused any
real issue on FreeBSD because the exclusive vnode lock is held over
the balloc/resize, the change is to make formally correct KPI use.
Based on: the Matthew Dillon' patch from DragonFly BSD
PR: 93942
Reviewed by: mckusick
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
The rootkey is burnt at production and can't be changed, thus is can be used
as a device unique ID or to generate a MAC address (This is was u-boot does).
The rootkey is exposed as a sysctl (dev.aw_sid.<unit>.rootkey).
Reviewed by: jmcneill
Differential Revision: https://reviews.freebsd.org/D6383
Fix the following panic seen when migrating a FreeBSD guest on Xen:
panic: mtx_lock() of destroyed mutex @ /usr/src/sys/dev/fb/vesa.c:541
cpuid = 0
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe001d2fa4f0
vpanic() at vpanic+0x182/frame 0xfffffe001d2fa570
kassert_panic() at kassert_panic+0x126/frame 0xfffffe001d2fa5e0
__mtx_lock_flags() at __mtx_lock_flags+0x15b/frame 0xfffffe001d2fa630
vesa_bios_save_restore() at vesa_bios_save_restore+0x78/frame 0xfffffe001d2fa680
vga_suspend() at vga_suspend+0xa3/frame 0xfffffe001d2fa6b0
isavga_suspend() at isavga_suspend+0x1d/frame 0xfffffe001d2fa6d0
bus_generic_suspend_child() at bus_generic_suspend_child+0x44/frame
[...]
This is caused because vga_sub_configure (which is called if the VGA adapter
is attached after VESA tried to initialize), points to vesa_configure, which
doesn't initialize the VESA mutex. In order to fix it, make sure
vga_sub_configure points to vesa_load, so that all the needed vesa
components are properly initialized.
Sponsored by: Citrix Systems R&D
MFC after: 3 days
PR: 209203
Reviewed by: dumbbell
Differential revision: https://reviews.freebsd.org/D7196
The prepares to kill device private fields in channel struct, which
are not flexible and extensible.
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D7243
It is only needed when removing a full bucket from the per-CPU cache. The
bucket cache (uz_buckets) is protected by the zone mutex and thus the
critical section can be released before inserting into that list.
MFC after: 1 week
It's a threshold for v_free_count, which is of type u_int. This also lets
us get rid of a cast in vm_paging_needed().
Reviewed by: alc
MFC after: 1 week
Also reduce the diff between us and upstream: the input data model will
always be DATAMODEL_NATIVE because of a bug (p_model is never set but is
always initialized to 0), so we don't need to override the caller anyway.
This change is also necessary to support the pid provider for 32-bit
processes on amd64.
MFC after: 2 weeks
And rename "DEFAULT" constants to the more accurate "MAX."
PR: 210382
Submitted by: Felix <felixphew0 at gmail.com>
Reviewed by: wblock, cem
Tested by: Dave Cottlehuber <dch at skunkwerks.at>
fixes that I think closes up the races Gleb was
looking for. This is running quite nicely in Netflix and
now no longer causes TCP-tcb leaks.
Differential Revision: 7135
Summary:
This driver supports the following methods to trigger gathering random bits from the hardware:
1. interrupt when the FIFO is full (default) fed into the harvest queue
2. callout (when BCM2835_RNG_USE_CALLOUT is defined) every second if hz is less than 100, otherwise hz / 100, feeding the random bits into the harvest queue
If the kernel is booted with verbose enabled, the contents of the registers will be dumped after the RBG is started during the attach routine.
Author: hackagadget_gmail.com (Stephen J. Kiernan)
Test Plan: Built RPI2 kernel and booted on board. Tested the different methods to feed the harvest queue (callout, interrupt) and the interrupt driven approach seems best. However, keeping the other method for people to be able to experiment with.
Reviewed By: adrian, delphij, markm
Differential Revision: https://reviews.freebsd.org/D6888
And create cpu to channel map at device attach time for storvsc(4).
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D7229
when it is being opened. This should fix the possible loss of a resize
event when disk capacity changed.
PR: 211028
Reported by: Dexuan Cui <decui at microsoft dot com>
MFC after: 3 weeks
The keep-state, limit and check-state now will have additional argument
flowname. This flowname will be assigned to dynamic rule by keep-state
or limit opcode. And then can be matched by check-state opcode or
O_PROBE_STATE internal opcode. To reduce possible breakage and to maximize
compatibility with old rulesets default flowname introduced.
It will be assigned to the rules when user has omitted state name in
keep-state and check-state opcodes. Also if name is ambiguous (can be
evaluated as rule opcode) it will be replaced to default.
Reviewed by: julian
Obtained from: Yandex LLC
MFC after: 1 month
Relnotes: yes
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D6674
The 11n duration calculation function in net80211 and the HAL round /up/
the duration calculation for short-gi, so we can't use that.
The 11n duration calculation doesn't know about the extra symbol time
needed for STBC, nor the LDPC encoding duration, so we can't use
that.
This (along with other, local hacks) allow the locationing services to
get down to around 200nS (yes, nanoseconds) of variance when speaking
to a "good" AP.
Tested:
* AR9380, STA mode, local locationing frame hacks
as defined in RFC 6296. The module works together with ipfw(4) and
implemented as its external action module. When it is loaded, it registers
as eaction and can be used in rules. The usage pattern is similar to
ipfw_nat(4). All matched by rule traffic goes to the NPT module.
Reviewed by: hrs
Obtained from: Yandex LLC
MFC after: 1 month
Relnotes: yes
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D6420
When threads were added to the kernel, the pr_pid member of the
NT_PRSTATUS note was repurposed to store LWP IDs instead of process
IDs. However, the process ID was no longer recorded in core dumps.
This change adds a pr_pid field to prpsinfo (NT_PRSINFO). Rather than
bumping the prpsinfo version number, note parsers can use the note's
payload size to determine if pr_pid is present.
Reviewed by: kib, emaste (older version)
MFC after: 2 months
Differential Revision: https://reviews.freebsd.org/D7117
First, PL_FLAG_FORKED events now also set a PL_FLAG_VFORKED flag when
the new child was created via vfork() rather than fork(). Second, a
new PL_FLAG_VFORK_DONE event can now be enabled via the PTRACE_VFORK
event mask. This new stop is reported after the vfork parent resumes
due to the child calling exit or exec. Debuggers can use this stop to
reinsert breakpoints in the vfork parent process before it resumes.
Reviewed by: kib
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D7045
In particular for me this fixes checksum problem when if_bridge attached
to the interface requests TXCSUM to be disabled, but effectively ignored.
MFC after: 3 days
Sponsored by: iXsystems, Inc.
is delivered to vforked child. Issue is that we avoid stopping such
children in issignal() to not block parents. But executed AST, which
ignored stops, leaves the child with the signal pending but no AST
pending.
On first exec after vfork(), call signotify() to handle pending
reenabled signals. Adjust the assert to not check vfork children
until exec.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
simplebus_add_device() expect a simplebus_softc structure associated with
the device.
Add the simplebus_softc as first member in am335x_pwmss_softc structure.
Sponsored by: Rubicon Communications (Netgate)
superblock, allowing provider to be bit bigger, i.e. have some
extra padding after the FS image. That in some cases might be
a side-effect of using CLOOP format which enforces certain block
size and trying to compress image that is not exactly the number
of those blocks in size. The UFS itself does not have any issues
mounting such padded file systems, so it's what GEOM_LABEL should
do.
Submitted by: @mizhka_gmail.com
Differential Revision: https://reviews.freebsd.org/D6208
optimizations into two distinct pieces. The first piece consists of the
code that should only be performed once per page fault and requires the map
to be locked. The second piece consists of the code that should be
performed each time a pager is called on an object in the shadow chain.
(This second piece expects the map to be unlocked.)
Previously, the entire implementation could be executed multiple times.
Moreover, the second and subsequent executions would occur with the map
unlocked. Usually, the ensuing unsynchronized accesses to the map were
harmless because the map was not changing. Nonetheless, it was possible for
a use-after-free error to occur, where vm_fault() wrote to a freed map
entry. This change corrects that problem.
Reported by: avg
Reviewed by: kib
MFC after: 3 days
Sponsored by: EMC / Isilon Storage Division
