band-aid for the general problem that if_link_state_change can be
called between if_detach and if_free leaving a task queued that has
been free'd.
Spotted by: thompsa
Reviewed by: rwatson
Approved by: re (rwatson)
address is configured with a /128 prefix. This is no longer necessary due
to r192011. In fact that code conflicts with r192011. This patch removes
the host route installation when detecting the /128 prefix, and instead
let the code added by r192011 to install the loopback route for that IPv6
interface address.
Reviewed by: bz
Approved by: re
so that it returns failure instead of crashing when "m->m_len" is
executed and m == NULL. The mbuf ptr can be NULL when a call to
xdrmbuf_getbytes() gets the bytes it needs, but they are at the end
of a short RPC reply. When this happens, xdrmbuf_getbytes() returns
success, but advances the mbuf ptr (xdrs->x_private) to m_next, which
is NULL. If this is followed by a call to xdrmbuf_getlong(), it calls
xdrmbuf_inline(), which would cause a crash by accessing "m->m_len".
Tested by: pho, serenity at exscape dot org
Approved by: re (rwatson), kib (mentor)
for normal build, and doesn't export well to CVS.
If they are needed later a script will be added to recreate the symlinks
when needed at build time.
Approved by: re (rwatson)
While show pcpu prints pc_dynamic this also prints the original
memory address as well as the maths.
Once dpcpu goes NUMA this is considered to help debugging as well.
Reviewed by: rwatson
Approved by: re
the mkver which is used in builds is the one in usr.sbin/ntp/scripts,
not the one in contrib/ntp/scripts.
Pointy hat to: cperciva
Approved by: re (rwatson)
when adding the __start_ symbol knows the expected section alignment
and can place the __start_ symbol correctly.
These sections will not support symbols with super-cache line alignment
requirements.
For full details, see posting to freebsd-current, 2009-08-10,
Message-ID: <20090810133111.C93661@maildrop.int.zabbadoz.net>.
Debugging and testing patches by:
Kamigishi Rei (spambox haruhiism.net),
np, lstewart, jhb, kib, rwatson
Tested by: Kamigishi Rei, lstewart
Reviewed by: kib
Approved by: re
all pertinent statatistics for the subsystem. These structures are
sometimes "borrowed" by kernel modules that require a place to store
statistics for similar events.
Add KPI accessor functions for statistics structures referenced by kernel
modules so that they no longer encode certain specifics of how the data
structures are named and stored. This change is intended to make it
easier to move to per-CPU network stats following 8.0-RELEASE.
The following modules are affected by this change:
if_bridge
if_cxgb
if_gif
ip_mroute
ipdivert
pf
In practice, most of these statistics consumers should, in fact, maintain
their own statistics data structures rather than borrowing structures
from the base network stack. However, that change is too agressive for
this point in the release cycle.
Reviewed by: bz
Approved by: re (kib)
The newbus lock is responsible for protecting newbus internIal structures,
device states and devclass flags. It is necessary to hold it when all
such datas are accessed. For the other operations, softc locking should
ensure enough protection to avoid races.
Newbus lock is automatically held when virtual operations on the device
and bus are invoked when loading the driver or when the suspend/resume
take place. For other 'spourious' operations trying to access/modify
the newbus topology, newbus lock needs to be automatically acquired and
dropped.
For the moment Giant is also acquired in some key point (modules subsystem)
in order to avoid problems before the 8.0 release as module handlers could
make assumptions about it. This Giant locking should go just after
the release happens.
Please keep in mind that the public interface can be expanded in order
to provide more support, if there are really necessities at some point
and also some bugs could arise as long as the patch needs a bit of
further testing.
Bump __FreeBSD_version in order to reflect the newbus lock introduction.
Reviewed by: ed, hps, jhb, imp, mav, scottl
No answer by: ariff, thompsa, yongari
Tested by: pho,
G. Trematerra <giovanni dot trematerra at gmail dot com>,
Brandon Gooch <jamesbrandongooch at gmail dot com>
Sponsored by: Yahoo! Incorporated
Approved by: re (ksmith)
- fix write() on pseudo-terminal masters to return the amount of bytes
passed to the TTY, not the amount of bytes read from user.
- fix ttydisc_rint_bypass() to set the high watermark when it cannot
write all input, just like ttydisc_rint() itself.
Approved by: re (kib)
addresses several minor issues:
- Fix audit_event definitions of AUE_OPENAT_RWT and AUE_OPENAT_RWTC.
- Fix build on Linux.
- Fix printing of class masks in the audump tool.
MFC after: 3 weeks
Obtained from: TrustedBSD Project
Approved by: re (kib)
since the last imported OpenBSM release:
OpenBSM 1.1p2
- Fix audit_event definitions of AUE_OPENAT_RWT and AUE_OPENAT_RWTC.
- Fix build on Linux.
- Fix printing of class masks in the audump tool.
Obtained from: TrustedBSD Project
vnet.c to iterate virtual network stacks without being aware of
the implementation details previously hidden in kern_vimage.c.
Now they are in the same file, so remove this added complexity.
Reviewed by: bz
Approved by: re (vimage blanket)
vnet.h, we now use jails (rather than vimages) as the abstraction
for virtualization management, and what remained was specific to
virtual network stacks. Minor cleanups are done in the process,
and comments updated to reflect these changes.
Reviewed by: bz
Approved by: re (vimage blanket)
firmware loading bugs.
Target mode support has received some serious attention to make it
more usable and stable.
Some backward compatible additions to CAM have been made that make
target mode async events easier to deal with have also been put
into place.
Further refinement and better support for NP-IV (N-port Virtualization)
is now in place.
Code for release prior to RELENG_7 has been stripped away for code clarity.
Sponsored by: Copan Systems
Reviewed by: scottl, ken, jung-uk kim
Approved by: re
instead of whatever the parent/system has (which is generally 0). This
mirrors the old-style default used for jail(2) in conjunction with the
security.jail.enforce_statfs sysctl.
Approved by: re (kib), bz (mentor)
parameter unless a (numeric) IPv6 address is given. Even the default
binaries built with -DINET6 will work with IPv6-less kernels. With an
eye to the future, similarly handle the possibility of an IPv4-less kernel.
Approved by: re (kib), bz (mentor)
- Don't grab the filedesc lock just to read fd_cmask.
- Drop vnode locks earlier when mounting the root filesystem and before
sanitizing stdin/out/err file descriptors during execve().
Submitted by: kib
Approved by: re (rwatson)
MFC after: 1 week
- Limit suffix to be no more than 30 bytes long. This matches GNU
behavior.
- Correct usage of memcpy().
Note that this commit only corrects the stack underflow issue, we
still need some other fixes to cover other edges. [1]
Reported by: Ron Jude <ronj wytheville org>
Discussed with: Matthew Green (original NetBSD gzip author),
Eygene Ryabinkin <rea-fbsd codelabs ru> [1]
Approved by: re (kib)
in prison_equal_ip4/6 while an inp mutex was held. Locking allprison_lock
can be avoided by making a restriction on the IP addresses associated with
jails:
Don't allow the "ip4" and "ip6" parameters to be changed after a jail is
created. Setting the "ip4.addr" and "ip6.addr" parameters is allowed,
but only if the jail was already created with either ip4/6=new or
ip4/6=disable. With this restriction, the prison flags in question
(PR_IP4_USER and PR_IP6_USER) become read-only and can be checked
without locking.
This also allows the simplification of a messy code path that was needed
to handle an existing prison gaining an IP address list.
PR: kern/136899
Reported by: Dirk Meyer
Approved by: re (kib), bz (mentor)
USB core:
- add support for defragging of written device data.
- improve handling of alternate settings in device side mode.
- correct return value from usbd_get_no_alts() function.
- reported by: HPS
- P4 ID: 166156, 166168
- report USB device release information to devd and pnpinfo.
- reported by: MIHIRA Sanpei Yoshiro
- P4 ID: 166221
Submitted by: hps
Approved by: re
See PR description for more info. Patch is
implemented differently than suggested, but
having the same result.
PR: usb/137188
Submitted by: hps
Approved by: re
