in the new NFS server for NFSv4, where it would report ENOENT
when the file actually existed on the server. This turned out
to be caused by not initializing ni_topdir before calling lookup()
and there was a rare case where the value on the stack location
assigned to ni_topdir happened to be a pointer to a ".." entry,
such that "dp == ndp->ni_topdir" succeeded in lookup().
This patch initializes ni_topdir to fix the problem.
MFC after: 5 days
significantly. Upon investigation this was caused by name cache
misses for lookups of "..". For name cache entries for non-".."
directories, the cache entry serves double duty. It maps both the
named directory plus ".." for the parent of the directory. As such,
two ctime values (one for each of the directory and its parent) need
to be saved in the name cache entry.
This patch adds an entry for ctime of the parent directory to the
name cache. It also adds an additional uma zone for large entries
with this time value, in order to minimize memory wastage.
As well, it fixes a couple of cases where the mtime of the parent
directory was being saved instead of ctime for positive name cache
entries. With this patch, Lookup RPC counts return to values similar
to pre-r230394 kernels.
Reported by: bde
Discussed with: kib
Reviewed by: jhb
MFC after: 2 weeks
associated with the previous vnode (if any) associated with the target of
a rename(). Otherwise, a lookup of the target pathname concurrent with a
rename() could re-add a name cache entry after the namei(RENAME) lookup
in kern_renameat() had purged the target pathname.
MFC after: 2 weeks
instead of accepting half-constructed vnode. Previous code cannot decide
what to do with such vnode anyway, and although processing it for hash
removal, paniced later when getting rid of nullfs reference on lowervp.
While there, remove initializations from the declaration block.
Tested by: pho
MFC after: 1 week
function null_destroy_proto() from null_insmntque_dtr(). Also
apply null_destroy_proto() in null_nodeget() when we raced and a vnode
is found in the hash, so the currently allocated protonode shall be
destroyed.
Lock the vnode interlock around reassigning the v_vnlock.
In fact, this path will not be exercised after several later commits,
since null_nodeget() cannot take shared-locked lowervp at all due to
insmntque() requirements.
Reported by: rea
Tested by: pho
MFC after: 1 week
a new jail parameter node with the following parameters:
allow.mount.devfs:
allow mounting the devfs filesystem inside a jail
allow.mount.nullfs:
allow mounting the nullfs filesystem inside a jail
Both parameters are disabled by default (equals the behavior before
devfs and nullfs in jails). Administrators have to explicitly allow
mounting devfs and nullfs for each jail. The value "-1" of the
devfs_ruleset parameter is removed in favor of the new allow setting.
Reviewed by: jamie
Suggested by: pjd
MFC after: 2 weeks
"panic in 8.3-PRERELEASE" on Feb. 22, 2012. This panic was caused
by use of a mix of tsleep() and msleep() calls on the same event
in the new NFS server DRC code. It did "mtx_unlock(); tsleep();"
in two places, which kib@ noted introduced a slight risk that the
wakeup() would occur before the tsleep(), resulting in a 10sec
delay before waking up. This patch fixes the problem by replacing
"mtx_unlock(); tsleep();" with mtx_sleep(..PDROP..). It also
changes a nfsmsleep() call to mtx_sleep() so that the code uses
mtx_sleep() consistently within the file.
Tested by: hrs (in progress)
Reviewed by: jhb
MFC after: 5 days
Add the sysctl debug.iosize_max_clamp, enabled by default. Setting the
sysctl to zero allows to perform the SSIZE_MAX-sized i/o requests from
the usermode.
Discussed with: bde, das (previous versions)
MFC after: 1 month
A new jail(8) option "devfs_ruleset" defines the ruleset enforcement for
mounting devfs inside jails. A value of -1 disables mounting devfs in
jails, a value of zero means no restrictions. Nested jails can only
have mounting devfs disabled or inherit parent's enforcement as jails are
not allowed to view or manipulate devfs(8) rules.
Utilizes new functions introduced in r231265.
Reviewed by: jamie
MFC after: 1 month
Add support for updating the devfs mount (currently only changing the
ruleset number is supported).
Check mnt_optnew with vfs_filteropt(9).
This new option sets the specified ruleset number as the active ruleset
of the new devfs mount and applies all its rules at mount time. If the
specified ruleset doesn't exist, a new empty ruleset is created.
MFC after: 1 month
ext4 but that can be used in ext3 mode.
Also adjust the internal inode to carry the birthtime,
like in UFS, which is starting to get some use when
big inodes are available.
Right now these are just placeholders for features
to come.
Approved by: jhb (mentor)
MFC after: 2 weeks
a credential structure would corrupt it. This happened when the
p argument was != NULL. However, I now realize that the copying of
open credentials should only happen for p == NULL, since that indicates
that it is a read-ahead or write-behind. This patch fixes this.
After this commit, r228827 could be reverted, but I think the code is
clearer and safer with the patch, so I am going to leave it in.
Without this patch, it was possible that a NFSv4 VOP_SETATTR() could have
changed the credentials of the caller. This would have happened if
the process doing the VOP_SETATTR() did not have the file open, but
some other process running as a different uid had the file open for writing
at the same time.
MFC after: 5 days
mnt_noasync counter to temporary remove MNTK_ASYNC mount option, which
is needed to guarantee a synchronous completion of the initiated i/o
before syscall or VOP return. Global removal of MNTK_ASYNC option is
harmful because not only i/o started from corresponding thread becomes
synchronous, but all i/o is synchronous on the filesystem which is
initiated during sync(2) or syncer activity.
Instead of removing MNTK_ASYNC from mnt_kern_flag, provide a local
thread flag to disable async i/o for current thread only. Use the
opportunity to move DOINGASYNC() macro into sys/vnode.h and
consistently use it through places which tested for MNTK_ASYNC.
Some testing demonstrated 60-70% improvements in run time for the
metadata-intensive operations on async-mounted UFS volumes, but still
with great deviation due to other reasons.
Reviewed by: mckusick
Tested by: scottl
MFC after: 2 weeks
the original IPv4 implementation from r178888:
- Use RT_DEFAULT_FIB in the IPv4 implementation where noticed.
- Use rt*fib() KPI with explicit RT_DEFAULT_FIB where applicable in
the NFS code.
- Use the new in6_rt* KPI in TCP, gif(4), and the IPv6 network stack
where applicable.
- Split in6_rtqtimo() and in6_mtutimo() as done in IPv4 and equally
prevent multiple initializations of callouts in in6_inithead().
- Use wrapper functions where needed to preserve the current KPI to
ease MFCs. Use BURN_BRIDGES to indicate expected future cleanup.
- Fix (related) comments (both technical or style).
- Convert to rtinit() where applicable and only use custom loops where
currently not possible otherwise.
- Multicast group, most neighbor discovery address actions and faith(4)
are locked to the default FIB. Individual IPv6 addresses will only
appear in the default FIB, however redirect information and prefixes
of connected subnets are automatically propagated to all FIBs by
default (mimicking IPv4 behavior as closely as possible).
Sponsored by: Cisco Systems, Inc.
any thread doing an I/O RPC with a transfer size greater than
NFS_UDPMAXDATA will be hung indefinitely, retrying the RPC.
After a discussion on freebsd-fs@, I decided to add a warning
message for this case, as suggested by Jeremy Chadwick.
Suggested by: freebsd at jdc.parodius.com (Jeremy Chadwick)
MFC after: 2 weeks
NFS clients was reported to freebsd-fs@ under the subject "NFS
corruption in recent HEAD" on Nov. 26, 2011. This problem occurred when
a TCP mounted root fs was changed to using UDP. I believe that this
problem was caused by the change in mnt_stat.f_iosize that occurred
because rsize was decreased to the maximum supported by UDP. This
patch fixes the problem by using v_bufobj.bo_bsize instead of f_iosize,
since the latter is set to f_iosize when the vnode is allocated, but
does not change for a given vnode when f_iosize changes.
Reported by: pjd
Reviewed by: kib
MFC after: 2 weeks
appropriate timestamps. Restore the assertions which verify that
NCF_TS is set when timestamp is asked for.
Reviewed by: jhb (previous version)
MFC after: 2 weeks
we will only trust a positive name cache entry for a specified amount of
time before falling back to a LOOKUP RPC, even if the ctime for the file
handle matches the cached copy in the name cache entry. The timeout is
configured via a new 'nametimeo' mount option and defaults to 60 seconds.
It may be set to zero to disable positive name caching entirely.
Reviewed by: rmacklem
MFC after: 1 week
from TCP to UDP and the rsize/wsize/readdirsize is greater
than NFS_MAXDGRAMDATA, it is possible for a thread doing an
I/O RPC to get stuck repeatedly doing retries. This happens
because the RPC will use a resize/wsize/readdirsize that won't
work for UDP and, as such, it will keep failing indefinitely.
This patch returns an error for this case, to avoid the problem.
A discussion on freebsd-fs@ seemed to indicate that returning
an error was preferable to silently ignoring the "udp"/"mntudp"
option.
This problem was discovered while investigating a problem reported
by pjd@ via email.
MFC after: 2 weeks
entries on one client when a directory was renamed on another client. The
root cause for the stale entry being trusted is that each per-vnode nfsnode
structure has a single 'n_ctime' timestamp used to validate positive name
cache entries. However, if there are multiple entries for a single vnode,
they all share a single timestamp. To fix this, extend the name cache
to allow filesystems to optionally store a timestamp value in each name
cache entry. The NFS clients now fetch the timestamp associated with
each name cache entry and use that to validate cache hits instead of the
timestamps previously stored in the nfsnode. Another part of the fix is
that the NFS clients now use timestamps from the post-op attributes of
RPCs when adding name cache entries rather than pulling the timestamps out
of the file's attribute cache. The latter is subject to races with other
lookups updating the attribute cache concurrently. Some more details:
- Add a variant of nfsm_postop_attr() to the old NFS client that can return
a vattr structure with a copy of the post-op attributes.
- Handle lookups of "." as a special case in the NFS clients since the name
cache does not store name cache entries for ".", so we cannot get a
useful timestamp. It didn't really make much sense to recheck the
attributes on the the directory to validate the namecache hit for "."
anyway.
- ABI compat shims for the name cache routines are present in this commit
so that it is safe to MFC.
MFC after: 2 weeks
subject "Data corruption over NFS in -current". During investigation
of this, I came across an ugly bogusity in the new NFS client where
it replaced the cr_uid with the one used for the mount. This was
done so that "system operations" like the NFSv4 Renew would be
performed as the user that did the mount. However, if any other
thread shares the credential with the one doing this operation,
it could do an RPC (or just about anything else) as the wrong cr_uid.
This patch fixes the above, by using the mount credentials instead of
the one provided as an argument for this case. It appears
to have fixed Martin's problem.
This patch is needed for NFSv4 mounts and NFSv3 mounts against
some non-FreeBSD servers that do not put post operation attributes
in the NFSv3 Statfs RPC reply.
Tested by: Martin Cracauer (cracauer at cons.org)
Reviewed by: jhb
MFC after: 2 weeks
to read strings completely to know the actual size.
As a side effect it fixes the issue with kern.proc.args and kern.proc.env
sysctls, which didn't return the size of available data when calling
sysctl(3) with the NULL argument for oldp.
Note, in get_ps_strings(), which does actual work for proc_getargv() and
proc_getenvv(), we still have a safety limit on the size of data read in
case of a corrupted procces stack.
Suggested by: kib
MFC after: 3 days
vm_object_pip_{add,subtract}() on the swap object because the swap
object can't be destroyed while the vnode is exclusively locked.
Moreover, even if the swap object could have been destroyed during
tmpfs_nocacheread() and tmpfs_mappedwrite() this code is broken
because vm_object_pip_subtract() does not wake up the sleeping thread
that is trying to destroy the swap object.
Free invalid pages after an I/O error. There is no virtue in keeping
them around in the swap object creating more work for the page daemon.
(I believe that any non-busy page in the swap object will now always
be valid.)
vm_pager_get_pages() does not return a standard errno, so its return
value should not be returned by tmpfs without translation to an errno
value.
There is no reason for the wakeup on vpg in tmpfs_mappedwrite() to
occur with the swap object locked.
Eliminate printf()s from tmpfs_nocacheread() and tmpfs_mappedwrite().
(The swap pager already spam your console if data corruption is
imminent.)
Reviewed by: kib
MFC after: 3 weeks
the new NFSv4 server where the code follows the wrong list.
Fortunately, for these fairly rare cases, the lc_stateid[]
lists are normally empty. This patch fixes the code to
follow the correct list.
Reported by: tai.horgan at isilon.com
Discussed with: zack
MFC after: 2 weeks
