Commit Graph

1110 Commits

Author SHA1 Message Date
Ruslan Ermilov
99bca5069e Simplify the assignment statement. 2003-03-12 14:32:46 +00:00
Sam Leffler
98822e3945 fix module building; drivers now require opt_{ubsec,hifn}.h 2003-03-11 23:20:43 +00:00
Sam Leffler
ac7e2c0515 FIPS 140-2 rng data tester for h/w crypto devices. This driver periodically
monitors the entropy data harvested by crypto drivers to verify it complies
with FIPS 140-2.  If data fails any test then the driver discards it and
commences continuous testing of harvested data until it is deemed ok.
Results are collected in a statistics block and, optionally, reported on
the console.  In normal use the overhead associated with this driver is
not noticeable.

Note that drivers must (currently) be compiled specially to enable use.

Obtained from:	original code by Jason L. Wright
2003-03-11 19:26:16 +00:00
Shunsuke Akiyama
20280807ca Fix device freeze to reduce output packet size.
And make this value configurable by kernel config or sysctl.
2003-03-09 11:50:27 +00:00
Yoshihiro Takahashi
484be8eac1 Build the drm module also on pc98. 2003-03-09 10:12:58 +00:00
Eric Anholt
43e2d1e384 Update the DRM to latest from DRI CVS. This is approximately the version
included in XFree86 4.3, but includes some fixes.  Notable changes include
Radeon 8500-9100 support, PCI Radeon/Rage 128 support, transform & lighting
support for Radeons, and vblank syncing support for r128, radeon, and mga.
The gamma driver was removed due to lack of any users.
2003-03-09 02:08:30 +00:00
Jonathan Lemon
921f8bb982 Fix module build by adding options to Makefile. 2003-03-08 21:54:32 +00:00
Peter Wemm
3c6b084e96 Finish driving a stake through the heart of netns and the associated
ifdefs scattered around the place - its dead Jim!

The SMB stuff had stolen AF_NS, make it official.
2003-03-05 19:24:24 +00:00
David Schultz
9c62b3ee7c Make TTYHOG tunable.
Reviewed by:	mike (mentor)
2003-03-05 08:16:29 +00:00
Robert Watson
03d031626d A cute yet small MAC policy that provides a simple ACL mechanism to
permit users and groups to bind ports for TCP or UDP, and is intended
to be combined with the recently committed support for
net.inet.ip.portrange.reservedhigh.  The policy is twiddled using
sysctl(8).  To use this module, you will need to compile in MAC
support, and probably set reservedhigh to 0, then twiddle
security.mac.portacl.rules to set things as desired.  This policy
module only restricts ports explicitly bound using bind(), not
implicitly bound ports where the port number is selected by the
IP stack.  It appears to work properly in my local configuration,
but needs more broad testing.

A sample policy might be:

  # sysctl security.mac.portacl.rules="uid:425:tcp:80,uid:425:tcp:79"

This permits uid 425 to bind TCP sockets to ports 79 and 80.  Currently
no distinction is made for incoming vs. outgoing ports with TCP,
although that would probably be easy to add.

Obtained from:	TrustedBSD Project
Sponsored by:	DARPA, Network Associates Laboratories
2003-03-02 23:01:42 +00:00
Mark Murray
c1f4590524 This is not going to win prizes for the most useful module ever,
but it is useful to me for some testing and warns-fixing.
2003-02-27 18:08:44 +00:00
Ruslan Ermilov
e4de92ce2b Hook up the if_my module to the build. 2003-02-27 14:49:56 +00:00
Tim J. Robbins
ef9e45dd01 Build the ncp and nwfs modules again, but only on i386 for now. 2003-02-27 11:31:08 +00:00
Scott Long
3f9be55c27 Revert the use of -g that leaked in. 2003-02-26 06:56:46 +00:00
Scott Long
7874f606d5 Introduce a new taskqueue that runs completely free of Giant, and in
turns runs its tasks free of Giant too.  It is intended that as drivers
become locked down, they will move out of the old, Giant-bound taskqueue
and into this new one.  The old taskqueue has been renamed to
taskqueue_swi_giant, and the new one keeps the name taskqueue_swi.
2003-02-26 03:15:42 +00:00
Marcel Moolenaar
907cf80fbf Remove support for running in SimOS. The support has rotted over
time and there's no indication that it will improve anytime soon.
By removing support for SimOS it is possible to build LINT on
Alpha, which is considered more important at the moment.

Not objected to on: alpha@
2003-02-25 00:42:40 +00:00
Eric Anholt
05d1e23aa7 Split the arch-specific AGP files into the appropriate files.* and do the same
for the agp module, and add agp to the list of modules to compile for alpha.
Add an alpha_mb() to agp_flush_cache for alpha -- it's not correct but may
improve the situation, and it's what linux and NetBSD do.
2003-02-14 06:33:52 +00:00
Peter Wemm
f801952a0b We only provide agp drivers for the intel chipsets, move the agp
subdir to the i386-only section.
2003-02-13 21:13:10 +00:00
Hidetoshi Shimokawa
85c8ffea1d Remove unnecessary EXPORT_SYMS. 2003-02-13 13:42:19 +00:00
Yoshihiro Takahashi
f9df75c095 pci_if.h is not needed. 2003-02-07 15:05:37 +00:00
Yoshihiro Takahashi
3febcc57ec - Clean up ISA DMA supports.
- Rename all sndbuf_isadma* functions to sndbuf_dma* and move them into
  sys/dev/sound/isa/sndbuf_dma.c.

No response from:	sound
2003-02-07 14:05:34 +00:00
Yoshihiro Takahashi
6780ab5432 isa_if.h is not needed.
No response from:	sound
2003-02-07 13:56:33 +00:00
Doug Ambrisko
233896e9da Take the rc4 code out of ng_mppc module so we don't fail to load when
we have the rc4 code already in the kernel (via wlan stuff or awi).
Add a dependency on the rc4 module so if it doesn't exist then load it.

Reviewed by:	archie
2003-02-05 19:11:11 +00:00
Hajimu UMEMOTO
ca26842e2a Add IPv6 support for Linuxlator.
Reviewed by:	dwmalone
MFC after:	10 days
2003-02-03 17:43:20 +00:00
Yoshihiro Takahashi
83536948ae Add CanBe power management controller support.
Submitted by:	KIYOHARA Takashi <kiyohara@kk.iij4u.or.jp>
2003-02-03 14:46:26 +00:00
Orion Hodson
f9eb140935 Add ac97_patch.[ch] that provide space for ac97 codec specific patches. 2003-01-25 16:54:05 +00:00
Max Khon
6cdcc15976 - add support for IPX (tested with mount -t nwfs and mars_nwe),
IP fast forwarding, SIOCGIFADDR, setting hardware address (not currently
enabled in cm driver), multicasts (experimental)
- add ARC_MAX_DATA, use IF_HANDOFF, remove arc_sprintf() and some unused
variables
- if_simloop logic is made more similar to ethernet
- drop not ours packets early (if we are not in promiscous mode)

Submitted by:	mark tinguely (partially)
2003-01-24 01:32:20 +00:00
Justin T. Gibbs
295ebaf851 Update GENSRCS and aicasm options correctly depending on whether register
pretty printing is enabled

Add a dependency on the source files for aicasm so that it will be rebuilt
if out of date.

Simplify.
2003-01-22 21:56:54 +00:00
Jake Burkholder
4875819c6e Run kldxref on sparc64, it works now. 2003-01-21 05:52:48 +00:00
David E. O'Brien
2d3ce7133a Remove miidevs.h and generate it from miidevs at compile time.
The devlist2h.awk tool to do this has been repocopied to sys/tools/.
2003-01-19 02:59:34 +00:00
Matthew N. Dodd
7534ac7ab7 A driver for the System Management Application Program
Interface (SMAPI) BIOS, which is present on some IBM
Thinkpad models (560, 600, 770 to name a few.)

The SMAPI BIOS provides access to System Information,
System Configuration, and Power Management.
2003-01-17 08:10:18 +00:00
Sam Leffler
a7c02787d0 remove wi-specific host ap code; the wi driver now depends on the
wlan module for 802.11 core support
2003-01-15 20:13:30 +00:00
Sam Leffler
0ac19bd5dc hookup wlan and rcv4 modules to the build
Reviewed by:	imp
2003-01-15 20:06:38 +00:00
Sam Leffler
241ab3c6ef add module for 802.11 link layer code
Reviewed by:	imp
2003-01-15 20:05:52 +00:00
Sam Leffler
50b25cd7d2 make rc4 crypto support a module so other modules can depend on it
Submitted by:	imp
Reviewed by:	imp
2003-01-15 19:55:17 +00:00
Poul-Henning Kamp
528e3c946d Add opt_geom.h to the list. 2003-01-13 08:31:41 +00:00
David E. O'Brien
73badb2452 Build gem(4) on powerpc also. 2003-01-09 16:37:37 +00:00
David E. O'Brien
d16723e8e7 Moved if_hme to hme.
(I need a score card to keep track of the /sys layout fights)
2003-01-09 16:32:12 +00:00
David E. O'Brien
1c65ef9352 Add an hme(4) module.
PR:		46871
Submitted by:	Hartmut Brandt <brandt@fokus.gmd.de>
2003-01-09 16:29:03 +00:00
Thomas Moestl
2f28543e59 Include if_hme_sbus.c, so that the module can also be used on sbus
machines. Remove opt_bdg.h, which is not needed.
2003-01-09 00:46:41 +00:00
Thomas Moestl
28d187c626 Build a gem module, for sparc64 only for now. 2003-01-08 20:40:29 +00:00
David E. O'Brien
b1c519de65 Add an hme(4) module.
PR:		46871
Submitted by:	Hartmut Brandt <brandt@fokus.gmd.de>
2003-01-08 18:45:04 +00:00
Hidetoshi Shimokawa
d6105b602c - Replace printf() with device_printf().
- Separate fc->dev (i.e. fwohci0) and fc->bdev (i.e. firewire0).
- Remove unused firewirebusreg.h.
- Reduce size of descriptor block for asynchronous transmit and
	check the number of descriptor when copying from mbuf.
- Skip mbuf whose length is zero. NFS seems passing such mbuf and
	some chips generates unrecoverable error.
2003-01-04 10:21:11 +00:00
Hidetoshi Shimokawa
b018dcd1b8 - Implement primal Configuration ROM parser.
- Support multiple LUNs for SBP-II.
2002-12-31 10:28:49 +00:00
Julian Elischer
4ea478a43f Make it work -current style. 2002-12-23 22:33:08 +00:00
Tim J. Robbins
56c1b4ab77 libmchain no longer exports m_fixhdr(); remove it from EXPORT_SYMS. 2002-12-14 00:01:51 +00:00
Scott Long
1f380ae506 Move the amd(4) driver to it's own directory in preparation for it growing
an sbus front-end.
2002-12-13 22:59:18 +00:00
Jake Burkholder
f2de139378 Don't run kldxref when installing modules on sparc64. kldxref and the whole
module dependency system rely on linker behaviour that is machine dependent
and not part of the elf spec, and only work by accident on other platforms.

Approved by:	re
2002-12-13 00:32:29 +00:00
Robert Watson
f7883a793c Correct alphabetization of awi entry.
Inane act of:	re
Spotted by:	bde
2002-12-08 17:59:44 +00:00
Robert Watson
e6f88402ff Move the awi module build dependency into the MACHINE_ARCH=i386 entry. 2002-12-08 03:55:35 +00:00