adding this major feature to the driver. Secondly, this updates the base
driver with new 20G device support, and with the new firmware levels some
changes to link handling and initialization were required.
MFC after: 1 week
The MEM_UOPS_RETIRED actually work the same way as the Sandy
Bridge counters, but the counters were documented in a different
way and that seemed to cause the Ivy Bridge counters to be
implemented incorrectly. Use the same counter definitions as
Sandy Bridge. While I'm here, rename the counters to match
what's documented in the datasheet.
Differential Revision: https://reviews.freebsd.org/D1590
MFC after: 1 month
Sponsored by: Sandvine Inc.
On Sandy Bridge and later, to count branch-related events you
have to or together a mask indicating the type of branch
instruction to count (e.g. direct jump, branch, etc) and a bits
indicating whether to count taken and not-taken branches. The
current counter definitions where defining this bits individually,
so the counters never worked and always just counted 0.
Fix the counter definitions to instead contain the proper
combination of masks. Also update the man pages to reflect the
new counters.
Differential Revision: https://reviews.freebsd.org/D1587
MFC after: 1 month
Sponsored by: Sandvine Inc.
A couple of pmc counters did not work because there were being
restricted to the wrong PMC unit. I've verified that these
counters now work and match the documented restrictions.
Differential Revision: https://reviews.freebsd.org/D1586
MFC after: 1 month
Sponsored by: Sandvine Inc
- Bump link state when stopping or starting the interface;
- Don't handle SIOCGIFADDR specially, similar to r277103.
This change is based on a previous revision from Andy Zhang
(Microsoft) who did the diagnostic work and many thanks to
them for their help in supporting the HyperV work.
PR: kern/187203
MFC after: 2 weeks
All the per-port support is really doing is applying a port visibility
mask to each of the switchports. Everything still look like a single
portgroup (vlan id 1), but the per-port visibility mask is modified.
Whilst I'm here, also add some initial dot1q support - the pvid stuff
is doing the right thing, but it's not useful without the rest of
the VLAN table programming.
It's enough for me to be able to use the LAN/WAN port distinction
on the AP135, where there isn't (for now!) a dedicated PHY for the
"WAN" port.
Tested:
* AP135, QCA9558 SoC + AR8327 switch
been done by U-Boot. This allows the USB to work when we load the kernel
directly.
No dma sync is performed after these operations as the data we read/write
is not used by the cpu after the calls to the maimbox driver.
Differential Revision: https://reviews.freebsd.org/D1940
Reviewed by: imp, Michal Meloun (meloun AT miracle.cz)
MFC after: 1 Week
Sponsored by: ABT Systems Ltd
* Even though I got the registers around "right", it seems
I'm not tickling the MDIO access correctly for the internal PHY
bus. Some of the switches are fine poking at the external PHY
registers; others aren't. So, enable direct PHY bus access
for the AR8327, and leave the existing code in place for the
others.
* Go and shuffle the register access around. Whilst here,
restore the 2ms delay if changing page.
* Comment out some of the stub printf()s; there's some upcoming
work to add port VLAN support.
Tested:
* AP135 development board
* Carambola2 - AR9331 SoC
When a gpiobus child is added, use its name to identify the mapped pin
names.
Make the respective changes to libgpio.
Add a new '-n' flag to gpioctl(8) to set the pin name.
Differential Revision: https://reviews.freebsd.org/D2002
Reviewed by: rpaulo
Requested by: many
The vtophys() function is used to get the physical page address for
the virtually allocated frame buffers when a physically continuous
memory area is not available. This change also allows removing the
masking of the FB_FLAG_NOMMAP flag in the PS3 syscons driver.
The FB and VT drivers were tested using X.org/xf86-video-scfb and
syscons.
uart implementations, and export them using the new linker-set mechanism.
Differential Revision: https://reviews.freebsd.org/D1993
Submitted by: Michal Meloun
(class and device) FDT UART. Define second one, UART_FDT_CLASS, for UART
class only.
This paves the way for declaring uart_class data and ofw/fdt compat data
with a uart implementation, rather than needing a big global table of
compat data and weak-symbol declarations of every existing implementation.
Differential Revision: https://reviews.freebsd.org/D1992
Submitted by: Michal Meloun
netmap rx queues, and the "batchiness" of rx updates sent to the chip.
These knobs will probably become per-rxq in the near future and will be
documented only after their final form is decided.
MFC after: 1 month
rework the code a little bit to use this function consistently to cleanup
all the changes made as part of the probe phase.
This fixes an issue where a FDT child node without a matching driver could
leave the GPIO pins mapped and prevent the further use of them.
This prints a warning when your system have a hinted child or a FDT child
node for which you don't have a matching driver:
gpiobus0: <unknown device> at pin(s) 24 irq 24
is the case, depending on the options, in some of the ARM hardware
simulators. In these cases we don't get an interrupt so will need to
schedule the task to write more data to the uart.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
This new function can be used by other drivers to reserve the use of GPIO
pins.
Anyway, the use of ofw_gpiobus_parse_gpios() is preferred when possible.
Requested by: Michal Meloun
the CPU nexus.
* Add ahb as a possible bus attachment
* Lay a comment down to remind me or whoever else ends up trying
to debug why the EEPROM isn't mapped in as to what's going on.
