Null_open() was only here to handle MNT_NODEV, but since that does
not affect any filesystems anymore, it could only have any effect
if you nullfs mounted a devfs but didn't want devices to show up.
If you need that, there are easier ways.
window was 0 bytes in size. This may have been the cause of unsolved
"connection not closing" reports over the years.
Thanks to Michiel Boland for providing the fix and providing a concise
test program for the problem.
Submitted by: Michiel Boland
MFC after: 2 weeks
Historically, our contigmalloc1() and contigmalloc2() assumes
that a page in PQ_CACHE can be unconditionally reused by busying
and freeing it. Unfortunatelly, when object happens to be not
NULL, the code will set m->object to NULL and disregard the fact
that the page is actually in the VM page bucket, resulting in
page bucket hash table corruption and finally, a filesystem
corruption, or a 'page not in hash' panic.
This commit has borrowed the idea taken from DragonFlyBSD's fix
to the VM fix by Matthew Dillon[1]. This version of patch will
do the following checks:
- When scanning pages in PQ_CACHE, check hold_count and
skip over pages that are held temporarily.
- For pages in PQ_CACHE and selected as candidate of being
freed, check if it is busy at that time.
Note: It seems that this is might be unrelated to kern/72539.
Obtained from: DragonFlyBSD, sys/vm/vm_contig.c,v 1.11 and 1.12 [1]
Reminded by: Matt Dillon
Reworked by: alc
MFC After: 1 week
and assume that the BIOS has set it up for us. This allows folks with a
serial-aware BIOS to set the BIOS to speeds above 9600 and allow boot0 to
just use the existing settings.
- Purge some gratuitous cpp comments as per style(9).
Submitted by: Danny Braniss danny at cs dot huji dot ac dot il (1)
MFC after: 1 month
assembler to cpp(1) comment conversions. This allows btx to compile again
when BTX_SERIAL is defined.
Reported by: Danny Braniss danny at cs dot huji dot ac dot il
MFC after: 1 month
'binat from ... to ... -> (if)' are used, where the interface
is dynamic.
Discovered by: kos(at)bastard(dot)net
Analyzed by: Pyun YongHyeon
Approved by: mlaier (mentor)
MFC after: 1 week
contents of the tcpcb are read and modified in volume.
In tcp_input(), replace th comparison with 0 with a comparison with
NULL.
At the 'findpcb', 'dropafterack', and 'dropwithreset' labels in
tcp_input(), assert 'headlocked'. Try to improve consistency between
various assertions regarding headlocked to be more informative.
MFC after: 2 weeks
Printf() a warning if if_attachdomain() is called more than once on an
interface to generate some noise on mailing lists when this occurs.
Fix up style in if_start(), where spaces crept in instead of tabs at
some point.
MFC after: 1 week
MFC note: Not the printf().
When a series of traces is included in a bug report, this will make it
easier to tie the trace information back to ps or threads output,
each of which will show the pid or the tid, but usually not both.
- Use a new-bus device driver for the ACPI PCI link devices. The devices
are called pci_linkX. The driver includes suspend/resume support so that
the ACPI bridge drivers no longer have to poke the links to get them
to handle suspend/resume. Also, the code to handle which IRQs a link is
routed to and choosing an IRQ when a link is not already routed is all
contained in the link driver. The PCI bridge drivers now ask the link
driver which IRQ to use once they determine that a _PRT entry does not
use a hardwired interrupt number.
- The new link driver includes support for multiple IRQ resources per
link device as well as preserving any non-IRQ resources when adjusting
the IRQ that a link is routed to.
- The entire approach to routing when using a link device is now
link-centric rather than pci bus/device/pin specific. Thus, when
using a tunable to override the default IRQ settings, one now uses
a single tunable to route an entire link rather than routing a single
device that uses the link (which has great foot-shooting potential if
the user tries to route the same link to two different IRQs using two
different pci bus/device/pin hints). For example, to adjust the IRQ
that \_SB_.LNKA uses, one would set 'hw.pci.link.LNKA.irq=10' from the
loader.
- As a side effect of having the link driver, unused link devices will now
be disabled when they are probed.
- The algorithm for choosing an IRQ for a link that doesn't already have an
IRQ assigned is now much closer to the one used in $PIR routing. When a
link is routed via an ISA IRQ, only known-good IRQs that the BIOS has
already used are used for routing instead of using probabilities to
guess at which IRQs are probably not used by an ISA device. One change
from $PIR is that the SCI is always considered a viable ISA IRQ, so that
if the BIOS does not setup any IRQs the kernel will degenerate to routing
all interrupts over the SCI. For non ISA IRQs, interrupts are picked
from the possible pool using a simplistic weighting algorithm.
Tested by: ru, scottl, others on acpi@
Reviewed by: njl
release the pipe mutex before calling fsetown(), as fsetown()
may block. The sigio code protects the pipe sigio data using
its own mutex, and the pipe reference count held by the caller
will prevent the pipe from being prematurely garbage-collected.
Discovered by: imp
is a PAL ID, while PCPU_GET(cpuid) is a FreeBSD CPU ID. The FreeBSD CPU
ID of the BSP is always zero, so use that to see which CPU should run the
full clock functions.
structure, so assert the inpcb lock associated with the tcptw.
Also assert the tcbinfo lock, as tcp_timewait() may call
tcp_twclose() or tcp_2msl_rest(), which require it. Since
tcp_timewait() is already called with that lock from tcp_input(),
this doesn't change current locking, merely documents reasons for
it.
In tcp_twstart(), assert the tcbinfo lock, as tcp_timer_2msl_rest()
is called, which requires that lock.
In tcp_twclose(), assert the tcbinfo lock, as tcp_timer_2msl_stop()
is called, which requires that lock.
Document the locking strategy for the time wait queues in tcp_timer.c,
which consists of protecting the time wait queues in the same manner
as the tcbinfo structure (using the tcbinfo lock).
In tcp_timer_2msl_reset(), assert the tcbinfo lock, as the time wait
queues are modified.
In tcp_timer_2msl_stop(), assert the tcbinfo lock, as the time wait
queues may be modified.
In tcp_timer_2msl_tw(), assert the tcbinfo lock, as the time wait
queues may be modified.
MFC after: 2 weeks
but unlikely races that could be corrected by having tcp_keepcnt
and tcp_keepintvl modifications go through handler functions via
sysctl, but probably is not worth doing. Updates to multiple
sysctls within evaluation of a single addition are unlikely.
Annotate that tcp_canceltimers() is currently unused.
De-spl tcp_timer_delack().
De-spl tcp_timer_2msl().
MFC after: 2 weeks
on the tcpcb, but also calls into tcp_close() and tcp_twrespond().
Annotate that tcp_twrecycleable() requires the inpcb lock because it does
a series of non-atomic reads of the tcpcb, but is currently called
without the inpcb lock by the caller. This is a bug.
Assert the inpcb lock in tcp_twclose() as it performs a read-modify-write
of the timewait structure/inpcb, and calls in_pcbdetach() which requires
the lock.
Assert the inpcb lock in tcp_twrespond(), as it performs multiple
non-atomic reads of the tcptw and inpcb structures, as well as calling
mac_create_mbuf_from_inpcb(), tcpip_fillheaders(), which require the
inpcb lock.
MFC after: 2 weeks
protects access to the ISN state variables.
Acquire the tcbinfo write lock in tcp_isn_tick() to synchronize
timer-driven isn bumping.
Staticize internal ISN variables since they're not used outside of
tcp_subr.c.
MFC after: 2 weeks
It means, that node listens to flow control messages from downstreams
and removes link from list of active links whenever a LINK_IS_DOWN message
is received. If LINK_IS_UP message is received, then links is put
back into list of active links.
Approved by: julian (mentor), implicitly
MFC after: 1 week
o Implement some netgraph flow control:
- Whenever status of HDLC heartbeat from pear is timed out,
send NGM_LINK_IS_DOWN message.
- If HDLC link changes status from down to up, send
NGM_LINK_IS_UP message.
Approved by: julian (mentor), implicitly
MFC after: 1 week
- Let hme_start()/hme_init() acquire lock and then call
hme_start_locked()/hme_init_locked() respectivly.
- Teardown interrupt handler before hme_detach().
- Remove IFF_NEEDSGIANT flag and mark interrupt handler INTR_MPSAFE.
- Set callout handler to CALLOUT_MPSAFE.
- Add locks in hme MII interface.
Reviewed by: jake
Tested by: Julian C. Dunn <jdunn at opentrend dot net>
MFC after: 2 weeks
Consolidate all of the bounce tests into the BUS_DMA_COULD_BOUNCE flag.
Allocate the bounce zone at either tag creation or map creation to help
avoid null-pointer derefs later on. Track total pages per zone so that
each zone can get a minimum allocation at tag creation time instead of
being defeated by mis-behaving tags that suck up the max amount.
Allocate the bounce zone at either tag creation or map creation to help
avoid null-pointer derefs later on. Track total pages per zone so that
each zone can get a minimum allocation at tag creation time instead of
being defeated by mis-behaving tags that suck up the max amount.
without ever being changed to actually work with an i8251. Nobody is
working on this either at the moment, so it's not about to change
soon.
When the code necessary to support the i8251 is committed, this can
be reverted again.
not used and aliases for other defines.
o Add REG_DATA as an alias for com_data. Likewise for other register
defines.
o Add LCR_SBREAK and make CFCR_SBREAK an alias for it. Likewise for
the other LCR register bits that are known with the CFCR prefix.
o Add MCR_IE and make MCR_IENABLE an alias for it.
o Add LSR_TEMT and make LSR_TSRE an alias for it.
o Add LSR_THRE and make LSR_TXRDY as alias for it.
o Add FCR_ENABLE and make FIFO_ENABLE as alias for it. Likewise for
the other FCR register bits that are known with the FIFO prefix.
o Add EFR_CTS and make EFR_AUTOCTS an alias for it.
o Add EFR_RTS and make EFR_AUTORTS an alias for it.
This is a first step in cleaning up the definitions in this file.
USPACE_SVC_STACK_TOP, USPACE_SVC_STACK_BOTTOM, USPACE_UNDEF_STACK_TOP,
and USPACE_UNDEF_STACK_BOTTOM look wrong to me, so I'm leaving them
alone.
Reviewed by: arch@
mp_machdep.c was using UAREA_PAGES to allocate something that isn't a
U area, and that there seems to be an implicit assumption that the PCB
is just past the end of the kernel stack.
Reviewed by: arch@
