header with archive_crypto_private.h, and its ARCHIVE_HASH_xxx macros
were renamed to ARCHIVE_CRYPTO_xxx.
Rename these macros in lib/libarchive/config_freebsd.h, to re-enable the
hashes for libarchive again. This affects the mtree format writer, and
the xar format reader and writer modules.
This also requires changes in the library order for statically linking
rescue, otherwise ld would complain about redefined symbols. Thanks to
jkim for pointing out the solution.
Reviewed by: kientzle
MFC after: 1 week
Replace fprintf_l with fputs when output is unformatted.
Use locale_t in _conv() since it was using sprintf (now sprintf_l)
Use locale_t on _yconv() sinci it calls _conv()
Obtained from: Apple Inc. (Libc 997.90.3)
CR: D482
Reviewed by: theraven
MFC after: 1 week
Unlike disk devices ZVOLs process all requests synchronously. That makes
impossible sending multiple requests to them from single thread. From the
other side ZVOLs have real d_read/d_write methods, which unlike d_strategy
can handle uio scatter/gather and have no strict I/O size limitations.
So, if ZVOL in "dev" mode is detected, use of d_read/d_write methods instead
of d_strategy allows to avoid pointless splitting of large requests into
MAXPHYS (128K) sized chunks.
MFC after: 1 week
ability to specify the the full path name of the keymap file.
Instead leave the original search order intact, but insert the path for
newcons-specific fonts (if run on a system using newcons):
- KEYMAP_PATH in environment
- full path name
- /usr/share/vt/keymaps (only if newcons is in use!)
- /usr/share/syscons/keymaps (also as fall-back for newcons)
MFC after: 1 week
newcons specific keymap files, not prefix[2]. The result of this bug was
that kbdcontrol ignored the files in the syscons keymap directory, which
apparently still work under newcons, for most locales.
MFC after: 1 week
Import Illumos changes to address the following Illumos issues:
4976 zfs should only avoid writing to a failing non-redundant
top-level vdev
4978 ztest fails in get_metaslab_refcount()
4979 extend free space histogram to device and pool
4980 metaslabs should have a fragmentation metric
4981 remove fragmented ops vector from block allocator
4982 space_map object should proactively upgrade when feature
is enabled
4984 device selection should use fragmentation metric
MFC after: 2 weeks
This also fixes a few minor violations of the SD protocol, such as running
the bus at high speed during the card identification sequence.
The sdcard_init() routine now probes for SDHC cards so that later read
requests can make needed adjustments between block and byte offsets based
on card type.
There is a new MCI_readblocks() function that takes block number and block
count parameters instead of byte-offset values. Using this routine, boot
loader code can load a kernel from any location on an SDHC or standard SD.
The old MCI_read() interface remains unchanged so that existing customized
boot loader code will still keep working without changes. Using this
routine, boot loaders can load a kernel from anywhere in the first 4GB of
an SDHC card (or of course any location on a standard SD card).
A new sdcard_use4wire() routine allows boot loaders to request 4-bit
transfers; it should be called after sdcard_init(). The sdcard_init()
routine no longer assumes the hardware is 4-wire capable and by default
sets things up for 1-bit transfers. (4-wire mode is unreliable on
at91rm9200, works on later SoCs.)
PR: 155894
Submitted by: me. years ago.
forever in vm_handle_hlt().
This is usually not an issue as long as one of the other vcpus properly resets
or powers off the virtual machine. However, if the bhyve(8) process is killed
with a signal the halted vcpu cannot be woken up because it's sleep cannot be
interrupted.
Fix this by waking up periodically and returning from vm_handle_hlt() if
TDF_ASTPENDING is set.
Reported by: Leon Dang
Sponsored by: Nahanni Systems
This commit does not add error returns to minidumpsys() or
textdump_dumpsys(); those can also be added later.
Submitted by: Conrad Meyer (EMC / Isilon storage division)
instead of at the beginning. This allows an intra process signal
to be sent to the oldest thread with the signal unmasked - which,
if it still exists, is the main thread. This mimics behavior
found in Linux and Solaris.
change 0 means success and non-zero means failure.
This also helps to eliminate VMEXIT_POWEROFF and VMEXIT_RESET as return values
from VM-exit handlers.
CR: D480
Reviewed by: grehan, jhb
The SHT range 0x70000000-0x7fffffff is processor-specific. Pass the
ELF machine type header to sh_types so the section header type name can
be reported correctly for the given processor.
For all ranges report the actual value for unknown types.
Add MIPS-specific type SHT_MIPS_OPTIONS.
CR: D483
Reviewed by: sbruno, marcel
Sponsored by: DARPA, AFRL
link_elf_obj: symbol icl_pdu_new_bhs undefined
PR: 192031
Submitted by: Nils Beyer (earlier version)
MFC after: 3 days
Sponsored by: FreeBSD Foundation
been transferred from zio_compress_data to its caller. Therefore, passing
the 'minblocksize' down will be a no-op.
Eliminate the parameter to reduce diff against upstream.
MFC after: 2 weeks
- Make sure the tests go into the right directory. The location was
wrong so they were overwriting the bin/chown tests!
- Use the right naming scheme for the test program.
- Remove the svn:executable property from the shell script.
It is not possible to PUSH a 32-bit operand on the stack in 64-bit mode. The
default operand size for PUSH is 64-bits and the operand size override prefix
changes that to 16-bits.
vm_copy_setup() can return '1' if it encounters a fault when walking the
guest page tables. This is a guest issue and is now handled properly by
resuming the guest to handle the fault.
after an intervening call to rewinddir() is undefined, so reclaim any
pending telldir() cookies in the directory when rewinddir() is called.
CR: D459
Reviewed by: jilles
MFC after: 1 week
true on amd64 I'm not quite positive this is the "correct" solution for
this but it does seem to compile and shut up the spew of warnings when
compiling libstand for userboot.
Add two _Static_asserts() so that in the future somebody will get a compile
failure if an architecture develops that violates the assumptions of this
code. (strongly suggested by jmg)
Change commetns to indicate int types instead of long. (noted by ian in
phabric review)
Phabric: https://phabric.freebsd.org/D443
(I'm committing this on behalf of my colleagues in the Storage team
at Chelsio).
Submitted by: Sreenivasa Honnur <shonnur at chelsio dot com>
Sponsored by: Chelsio Communications.
PF_LINK, and multicast/broadcast flag should always be dropped because
the outer protocol uses unicast even when the inner address is not for
unicast. It had been broken since r236951 when gif_output() started to
use IFQ_HANDOFF().
and tmpfs object cannot shadow. In other words, tmpfs vm object is
always at the bottom of the shadow chain.
Reported and tested by: bdrewery
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
HSD131 erratum in [1]) at a considerable rate. So filter these (default),
unless logging is enabled. Unfortunately, there really is no better way to
reasonably implement suppressing these errors than to just skipping them
in mca_log(). Given that they are reported for bank 0, they'd need to be
masked in MSR_MC0_CTL. However, P6 family processors require that register
to be set to either all 0s or all 1s, disabling way more than the one error
in question when using all 0s there. Alternatively, it could be masked for
the corresponding CMCI, but that still wouldn't keep the periodic scanner
from detecting these spurious errors. Apart from that, register contents of
MSR_MC0_CTL{,2} don't seem to be publicly documented, neither in the Intel
Architectures Developer's Manual nor in the Haswell datasheets.
Note that while HSD131 actually is only about C0-stepping as of revision
014 of the Intel desktop 4th generation processor family specification
update, these corrected errors also have been observed with D0-stepping
aka "Haswell Refresh".
1: http://www.intel.de/content/dam/www/public/us/en/documents/specification-updates/4th-gen-core-family-desktop-specification-update.pdf
Reviewed by: jhb
MFC after: 3 days
Sponsored by: Bally Wulff Games & Entertainment GmbH
involves updating the corresponding page tables followed by accesses to the
pages in question. This sequence is subject to the situation exactly described
in the "AMD64 Architecture Programmer's Manual Volume 2: System Programming"
rev. 3.23, "7.3.1 Special Coherency Considerations" [1, p. 171 f.]. Therefore,
issuing the INVLPG right after modifying the PTE bits is crucial (see also
r269050).
For the amd64 PMAP code, the order of instructions was already correct. The
above fact still is worth documenting, though.
1: http://amd-dev.wpengine.netdna-cdn.com/wordpress/media/2012/10/24593_APM_v21.pdf
Reviewed by: alc
Sponsored by: Bally Wulff Games & Entertainment GmbH
corresponding page tables followed by accesses to the pages in question.
This sequence is subject to the situation exactly described in the "AMD64
Architecture Programmer's Manual Volume 2: System Programming" rev. 3.23,
"7.3.1 Special Coherency Considerations" [1, p. 171 f.]. Therefore, issuing
the INVLPG right after modifying the PTE bits is crucial.
For pmap_copy_page(), this has been broken in r124956 and later on carried
over to pmap_copy_pages() derived from the former, while all other places
in the i386 PMAP code use the correct order of instructions in this regard.
Fixing the latter breakage solves the problem of data corruption seen with
unmapped I/O enabled when running at least bare metal on AMD R-268D APUs.
However, this might also fix similar corruption reported for virtualized
environments.
- In pmap_copy_pages(), correctly set the cache bits on the source page being
copied. This change is thought to be a NOP for the real world, though. [2]
1: http://amd-dev.wpengine.netdna-cdn.com/wordpress/media/2012/10/24593_APM_v21.pdf
Submitted by: kib [2]
Reviewed by: alc, kib
MFC after: 3 days
Sponsored by: Bally Wulff Games & Entertainment GmbH
