- fix panic due to tqid overflow
- Improve libzfs_error_init messages
- Expose zfetch_max_idistance tunable
- Make dbufstat work on FreeBSD
- Fix EIO after resuming receive of new dataset over an existing one
Some vnodes come with a hack which inherits the fplookup flag despite having vops
which don't provide the routine.
Reported by: YAMAMOTO Shigeru <shigeru@os-hackers.jp>
The 32-bit counter eventually wraps to 0 which is a sentinel for invalid
id.
Make it 64-bit on LP64 platforms and 0-check otherwise.
Note: Linux counterpart uses id stored per queue instead of a global.
I did not check going that way is feasible with the goal being the
minimal fix doing the job.
Reported by: YAMAMOTO Shigeru <shigeru@os-hackers.jp>
Reviewed by: mav
Differential Revision: https://reviews.freebsd.org/D26759
Add support to the _STANDALONE environment enough bits of the kernel
that we can compile it. We still have a small zstd_shim.c since there
were 3 items that were a bit hard to nail down and may be cleaned up
in the future. These go hand in hand with a number of commits to
sys/sys in the past weeks, should this need be MFCd.
Discussed with: mmacy (in review and on IRC/Slack)
Reviewed by: freqlabs (on openzfs repo)
Differential Revision: https://reviews.freebsd.org/D26218
Dynamically created OIDs automatically get this flag set.
Reviewed by: jhb
MFC after: 1 week
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D26561
- Annotate FreeBSD sysctls with CTLFLAG_MPSAFE
- Reduce stack usage of Lua
- Don't save user FPU context in kernel threads
- Add support for procfs_list
- Code cleanup in zio_crypt
- Add DB_RF_NOPREFETCH to dbuf_read()s in dnode.c
- Drop references when skipping dmu_send due to EXDEV
- Eliminate gratuitous bzeroing in dbuf_stats_hash_table_data
- Fix legacy compat for platform IOCs
This was introduced when I merged r361287 to OpenZFS and has been fixed
there already, commit 3f6bb6e43fd68e.
Reported by: swills
Reviewed by: allanjude, freqlabs, mmacy
An upcoming change to include bitset(9) macros from vm_page.h
causes a macro name collision with vchi's custom bitset macros.
This change was performed mechanically by:
sed -i .orig s/BITSET/VCHI_BITSET/g $(grep -rl BITSET sys/contrib/vchiq)
Reviewed by: andrew
Approved by: scottl (implicit)
MFC after: 1 week
Sponsored by: Ampere Computing, Inc.
Differential Revision: https://reviews.freebsd.org/D26177
The pointer to vnode is already stored into f_vnode, so f_data can be
reused. Fix all found users of f_data for DTYPE_VNODE.
Provide finit_vnode() helper to initialize file of DTYPE_VNODE type.
Reviewed by: markj (previous version)
Discussed with: freqlabs (openzfs chunk)
Tested by: pho (previous version)
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D26346
This package is intended to be used with ice(4) version 0.26.16. That
update will happen in a forthcoming commit.
MFC after: 3 days
Sponsored by: Intel Corporation
Make the inlines static to avoid kernel build failure with Clang 11 on i386.
(The issue was not observed with Clang 10, currently in tree; reproduction
depends on compiler inlining choices.)
The compiler may choose not to inline 'bare' C inlines, and in that case
expects a symbol of the same name will be available. It does not
automatically define that symbol at use, because of traditional C linking
semantics. (In contrast, C++ does define it, and then deduplicates redundant
definitions at link). As we do not instantiate the C99 inline ('extern
inline ...;'), the linker errors with "undefined symbol."
Reported by: dim
Tested by: dim
Fixes: r364219
Add prng(9) as a replacement for random(9) in the kernel.
There are two major differences from random(9) and random(3):
- General prng(9) APIs (prng32(9), etc) do not guarantee an
implementation or particular sequence; they should not be used for
repeatable simulations.
- However, specific named API families are also exposed (for now: PCG),
and those are expected to be repeatable (when so-guaranteed by the named
algorithm).
Some minor differences from random(3) and earlier random(9):
- PRNG state for the general prng(9) APIs is per-CPU; this eliminates
contention on PRNG state in SMP workloads. Each PCPU generator in an
SMP system produces a unique sequence.
- Better statistical properties than the Park-Miller ("minstd") PRNG
(longer period, uniform distribution in all bits, passes
BigCrush/PractRand analysis).
- Faster than Park-Miller ("minstd") PRNG -- no division is required to
step PCG-family PRNGs.
For now, random(9) becomes a thin shim around prng32(). Eventually I
would like to mechanically switch consumers over to the explicit API.
Reviewed by: kib, markj (previous version both)
Discussed with: markm
Differential Revision: https://reviews.freebsd.org/D25916
It was pointed out to me that this is the convention for documenting upgrade
instructions, rather than just leaving the instructions in the commit message.
It's possible these commands won't be used again before we transition to git,
but then at least they'll give a path forward for whoever touches this next.
Suggested by: lwhsu
We use these to compile libefivar. The particular motivation for this update is
the inclusion of the RISC-V machine definitions that allow us to build the
library on the platform. This support could easily have been submitted as a
small local diff, but the timing of the release coincided with this work, and
it has been over 3 years since these sources were initially imported.
Note that this comes with a license change from regular BSD 2-clause to the
BSD+Patent license. This has been approved by core@ for this particular
project [1].
As with the original import, we retain only the subset of headers that we
actually need to build libefivar. I adapted imp@'s process slightly for this
update:
# Generate list of the headers needed to build
cp -r ../vendor/edk2/dist/MdePkg/Include sys/contrib/edk2
cd lib/libefivar
make
pushd `make -V .OBJDIR`
cat .depend*.o | grep sys/contrib | cut -d' ' -f 3 |
sort -u | sed -e 's=/full/path/sys/contrib/edk2/==' > /tmp/xxx
popd
# Merge the needed files
cd ../../sys/contrib/edk2
svn revert -R .
for i in `cat /tmp/xxx`; do
svn merge -c VendorRevision svn+ssh://repo.freebsd.org/base/vendor/edk2/dist/MdePkg/$i $i
done
svn merge -c VendorRevision svn+ssh://repo.freebsd.org/base/vendor/edk2/dist/MdePkg/MdePkg.dec MdePkg.dec
[1] https://www.freebsd.org/internal/software-license.html
The ice(4) driver is the driver for the Intel E8xx series Ethernet
controllers; currently with codenames Columbiaville and
Columbia Park.
These new controllers support 100G speeds, as well as introducing
more queues, better virtualization support, and more offload
capabilities. Future work will enable virtual functions (like
in ixl(4)) and the other functionality outlined above.
For full functionality, the kernel should be compiled with
"device ice_ddp" like in the amd64 NOTES file, and/or
ice_ddp_load="YES" should be added to /boot/loader.conf so that
the DDP package file included in this commit can be downloaded
to the adapter. Otherwise, the adapter will fall back to a single
queue mode with limited functionality.
A man page for this driver will be forthcoming.
MFC after: 1 month
Relnotes: yes
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D21959
* Removed adaptive interrupt moderation (not suported on FreeBSD).
* Use ena_com_free_q_entries instead of ena_com_free_desc.
* Don't use ENA_MEM_FREE outside of the ena_com.
* Don't use barriers before calling doorbells as it's already done in
the HAL.
* Add function that generates random RSS key, common for all driver's
interfaces.
* Change admin stats sysctls to U64.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Although I added the reset type field to ath_hal_reset() years ago,
I never finished adding it both throughout the HALs and in if_ath.c.
This will eventually deprecate the ath_hal force_full_reset option
because it can be requested at the driver layer.
So:
* Teach ar5416ChipReset() and ar9300_chip_reset() about the HAL type
* Use it in ar5416Reset() and ar9300_reset() when doing a full chip reset
* Extend ath_reset() to include the HAL_RESET_TYPE parameter added in the above functions
* Use HAL_RESET_NORMAL in most calls to ath_reset()
* .. but use HAL_RESET_BBPANIC for the BB panics, and HAL_RESET_FORCE_COLD during fatal, beacon miss and other hardware related hangs.
This should be a glorified no-op outside of actual hardware issues.
I've tested things with ath_hal force_full_reset set to 1 for years now,
so I know that feature and a full reset works (albeit much slower than
a warm reset!) and it does unwedge hardware.
The eventual aim is to use this for all the places where the driver
detects a potential hang as well as if long calibration - ie, noise floor
calibration - fails to complete. That's one of the big hardware related
things that causes station mode operation to hang without easy recovery.
Differential Revision: https://reviews.freebsd.org/D24981
As usual, the full release notes are found on Github:
https://github.com/facebook/zstd/releases/tag/v1.4.5
Notable changes include:
* Improved decompress performance on amd64 and arm (5-10%
and 15-50%, respectively).
* '--patch-from' zstd(1) CLI option, which provides something like a very fast
version of bspatch(1) with slightly worse compression. See release notes.
In this update, I dropped the 3-year old -O0 workaround for an LLVM ARM bug;
the bug was fixed in LLVM SVN in 2017, but we didn't remove this workaround
from our tree until now.
MFC after: I won't, but feel free
Relnotes: yes
Yes, people shouldn't use bitfields in C for structure parsing.
If someone ever wants a cleanup task then it'd be great to remove them
from this vendor code and other places in the ar9285/ar9287 HALs.
Alas, here we are.
AH_BYTE_ORDER wasn't defined and neither were the two values it could be.
So when compiling ath_ee_print_9300 it'd default to the big endian struct
layout and get a WHOLE lot of stuff wrong.
So:
* move AH_BYTE_ORDER into ath_hal/ah.h where it can be used by everyone.
* ensure that AH_BYTE_ORDER is actually defined before using it!
This should work on both big and little endian platforms.
Ok, yeah, the commit title is a bit misleading.
This has to do with CDD (cyclic delay diversity) - how this and later
wifi hardware transmits lower rates over more antennas. Eg, if you're
transmitting legacy 11abg rates on 2 or 3 antennas, you COULD just
send them all at the same time or you could delay each by tens/hundreds
of nanoseconds to try and get some better diversity characteristics.
However, this has a fun side effect - the antenna pattern is no longer
a bunch of interacting dipoles, but are a bunch of interacting dipoles
plus a bunch of changing phases. And it's frequency dependent - 50-200nS
is not exactly the same fraction of a wavelength across all of 2GHz or 5GHz!
Thus the power spectral density and maximum directional gain that you're
effectively getting is not .. well, as flat as it once was.
For more information, look up FCC/OET 13TR1003 in the FCC technical report
database. It has pretty graphics and everything.
Anyway, the problem lies thusly - the CDD code just subtracts another 3dB
or 5dB for the lower rates based on transmit antenna configuration.
However, it's not done based on operating configuration and it doesn't
take into account how far from any regulatory limits the hardware is at.
It also doesn't let us do things like transmit legacy rates and frames
on a single antenna without losing up to 5dB when we absolutely don't
need to in that case (there's no CDD used when one antenna is used!)
This shows up as the hardware behaving even worse for longer distance links
at 20MHz because, well, those are the exact rates losing a bunch more
transmit power.
* For lower power NICs (ie the majority of what is out there!) it's highly
unlikely we're going to hit anywhere near the PSD limits.
* It's doing it based on the existing limits from the CTL table (conformance
testing limits) - this isn't the regulatory max! It's what the NIC is
allowed to put out in each frequency and rate configuration! So things like
band edges, power amplifier behaviour and maximum current draw apply here.
Blindly subtracting 3 to 5dB from /this/ value is /very/ conservative..
* /and/ ath9k just plainly doesn't do any of this at all.
So, for now disable it and get the TX power back, thus matching what ath9k
in Linux is doing. If/once I get some more cycles I'll look at making it
a bit more adaptive and really only kick in if we're a few dB away from
hard regulatory limits.
Tested:
* AR9344 (2GHz + SoC, 2x2 configuration) - AP and STA modes
* QCA9580 (5GHz 2x2 and 3x3 configurations) - AP and STA modes
Now that armv4/v5 is gone, remove the bits that implemented atomic operations
by disabling interrupts.
Those were specific to FreeBSD and never reached upstream.
This is required to switch MIPS to compile with LLVM by default (D23204).
Reviewed By: brooks
Differential Revision: https://reviews.freebsd.org/D24091
