The aim is to permit mbuf allocations after a panic without calling into
the page allocator, without imposing any runtime overhead during regular
operation of the system, and without modifying driver code. The approach
taken is to preallocate a number of mbufs and clusters, storing them
in linked lists, and using the lists to back some UMA cache zones. At
panic time, the mbuf and cluster zone pointers are overwritten with
those of the cache zones so that the mbuf allocator returns
preallocated items.
Using this scheme, drivers which cache mbuf zone pointers from
m_getzone() require special handling when implementing netdump support.
Reviewed by: cem (earlier version), julian, sbruno
MFC after: 1 month
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D15251
Doing so introduces races which can lead to a use-after-free when
grabbing a snapshot of the GEOM mesh.
To ensure that a mirror's disk list remains stable, change its locking
protocol: both the softc lock and the topology lock are now required
to modify the list, so either lock is sufficient for traversal.
Tested by: pho
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
to avoid a LOR on the multicast list lock in the freemoptions routines.
As it turns out, tcp_usr_detach can acquire the tcbinfo lock readonly.
Trying to wunlock the pcbinfo lock in that context has caused a number
of reported crashes.
This change unclutters in_pcbfree and moves the handling of wunlock vs
runlock of pcbinfo to the freemoptions routine.
Reported by: mjg@, bde@, o.hartmann at walstatt.org
Approved by: sbruno
These firmwares and the following list of changes are from the public
ChelsioUwire-3.7.1.0 release.
T6 Firmware
================================================================================
Version : 1.19.1.0
Date : 04/23/2018
================================================================================
Fixes
-----
BASE:
- Fixed traffic stall when rate-limit is modified while running traffic.
- Fixes a firmware crash in FW_ETH_TX_EO_WR handling.
- Fixes host DCB support when FW_PORT_CMD is used.
ETH:
- Exit Auto-Negotiation if we don't receive base page from peer within 10s.
This fixes some cases where in we keep on restarting auto negotiation without
ever exiting, resulting in link failure.
- Fixes an issue where VF packets counter were not increasing if VF packets
coalesced WR is used by driver.
OFLD:
- Kernel and user mode NVMEoF performance enhancements.
FOiSCSI:
- Fixes fw crash when trying to connect to non-existence IPv6 iSNS target.
================================================================================
Version : 1.18.9.0
Date : 03/27/2018
================================================================================
Fixes
-----
BASE:
- For Ethernet frames less than 64B, pad them with zero bytes as per IEEE spec
(RFC 894).
- Added a new parameter iqtype to FW_IQ_CMD to identify the ingress NIC or offload
queues. This fixes an issue where driver was receiving interrupt with no new
messages in queue.
- FW_PARAMS_CMD processes all the valaid paramaters and returns value 0UL for
any unknown parameter.
OFLD:
- Fixes connection failure during SRQ reuse.
- Fixes incorrect cqe in case of WRITE with immediate operation.
FOiSCSI:
- Fixes a fw crash when wrong node-id is passed to FW_FOISCSI_CTRL_WR.
FOFCoE:
- Fixes a fw hang while creating NPIV.
Enhancements
------------
ETH:
- A new WR FW_ETH_TX_PKTS_VM_WR added to support VM packet coalescing.
================================================================================
Version : 1.18.4.0
Date : 02/28/2018
================================================================================
Fixes
-----
BASE:
- Fixed Rate limiting not working for 101Mbps<=rate limit<=163Mbps range.
- Fixed starting more than 32 VMs on PF4 causing firmware hang.
ETH:
- Fixed link failure due to FEC mismatch with optics.
- Fixed link failure with link toggle stress tests.
- Only BaseR FEC is supported for 50G.
- Fixed a bug in next page handling which sometimes causes link down.
- Fixed port down due to failre to read eeprom contents of some modules.
- Fixed a bug causing adapter to fail with spider configuration.
FOiSCSI:
- Fixed a bug causing login failure when connecting to multiple targets.
Enhancements
------------
BASE:
- Added a new firmware API to retrieve the maximum temperaturethreshold for
the chip (FW_PARAM_DEV_DIAG_MAXTMPTHRESH).
ETH:
- Added support for user to contol pause negotiation during auto negotiation.
FOiSCSI:
- Added a new facility to redirect few fw events to offload rx queue
(based on driver's configration)
- Driver can ignore providing ipv6 prefix len during ipv6 address configuration.
================================================================================
Version : 1.17.14.0
Date : 12/27/2017
================================================================================
FIXES
-----
BASE:
- Fixed an FLR failure during simulteneous power up of VM.
- Fixed an issue in vlan acl which was limiting vlan range to 1024.
ETH:
- Enabled RS-FEC for 25G active copper cable and 25GBASE-SR.
- When auto negotiation is enabled, final pause settings are resolved
based on local and peer pause settings.
- Handle NACK for an I2C access.
OFLD
- Fixed rdma connection cleanup in SO adpater.
- Fixed rdma connections during read invalidate.
- Fixed the crash when invalid BW rate is passed to fw.
- Fixed the traffic hang when BW allocation is changed from switch during traffic.
FOFCoE:
- Fixed an issue where initiator remains logged-in even after LLDP is disabled
on switch.
ENHANCEMENTS
------------
BASE:
- Added support for 248 VFs.
- Added fw driver periodic calibration for MC.
ETH:
- Added XLAUI port type support.
- Added raw mac entry deletion support (FW_VI_MAC_ID_BASED_FREE).
OFLD:
- Inline IPSec support added (flag F_FW_ULPTX_WR_DATA indicates the inline
IPSec WR).
- New work request FW_RI_RDMA_WRITE_CMPL_WR (write with completion) added to
T5 Firmware
================================================================================
Version : 1.19.1.0
Date : 04/23/2018
================================================================================
Fixes
-----
BASE:
- Fixes a firmware crash in FW_ETH_TX_EO_WR handling.
- Fixes host DCB support when FW_PORT_CMD is used.
ETH:
- Fixes an issue where VF packets counter were not increasing if VF packets
coalesced WR is used by driver.
OFLD:
- Fixes an issue where fw hangs if max traffic rate passed is 0.
FOiSCSI:
- Fixes fw crash when trying to connect to non-existence IPv6 iSNS target.
================================================================================
Version : 1.18.9.0
Date : 03/27/2018
================================================================================
Fixes
-----
BASE:
- For Ethernet frames less than 64B, pad them with zero bytes as per IEEE spec
(RFC 894).
- Added a new parameter iqtype to FW_IQ_CMD to identify the ingress NIC or offload
queues. This fixes an issue where driver was receiving interrupt with no new
messages in queue.
ETH:
- Pad the Ethernet packets of size less than 64B with zeros. This fixes the
incorrect checksum generation of packets less then 64B.
FOiSCSI:
- Fixes a fw crash when wrong node-id is passed to FW_FOISCSI_CTRL_WR.
FOFCoE:
- Fixes a fw hang while creating NPIV.
Enhancements
------------
ETH:
- A new WR FW_ETH_TX_PKTS_VM_WR added to support VM packet coalescing.
================================================================================
Version : 1.18.4.0
Date : 02/28/2018
================================================================================
Fixes
-----
BASE:
- Fixed starting more than 32 VMs on PF4 causing firmware hang.
FOiSCSI:
- Fixed a bug causing login failure when connecting to multiple targets.
Enhancements
------------
BASE:
- Added a new firmware API to retrieve the maximum temperaturethreshold for
the chip (FW_PARAM_DEV_DIAG_MAXTMPTHRESH).
ETH:
- Added support for user to contol pause negotiation during auto negotiation.
FOiSCSI:
- Added a new facility to redirect few fw events to offload rx queue
(based on driver's configration)
- Driver can ignore providing ipv6 prefix len during ipv6 address configuration.
================================================================================
Version : 1.17.14.0
Date : 12/27/2017
================================================================================
FIXES
-----
BASE:
- Fixed an issue in vlan acl which was limiting vlan range to 1024.
ETH:
- Corrected lane inversion logic.
- Fixed improper LED behavior in T580 cards.
- When auto negotiation is enabled, final pause settings are resolved
based on local and peer pause settings.
- Handle NACK for an I2C access.
OFLD
- Fixed rdma connections during read invalidate.
FOiSCSI:
- Fixed a connections hang when link is toggled frequently.
FOFCoE:
- Fixed an issue where initiator remains logged-in even after LLDP is disabled
on switch.
ENHANCEMENTS
------------
BASE:
- Added support for 124 VFs.
ETH:
- Added XLAUI port type support.
- Added raw mac entry deletion support (FW_VI_MAC_ID_BASED_FREE).
OFLD:
- New work request FW_RI_RDMA_WRITE_CMPL_WR (write with completion) added to
optimize NVMEoF write.
T4 Firmware
================================================================================
Version : 1.19.1.0
Date : 04/23/2018
================================================================================
Fixes
-----
BASE:
- Fixes a firmware crash in FW_ETH_TX_EO_WR handling.
- Fixes host DCB support when FW_PORT_CMD is used.
FOiSCSI:
- Fixes fw crash when trying to connect to non-existence IPv6 iSNS target.
================================================================================
Version : 1.18.9.0
Date : 03/27/2018
================================================================================
Fixes
-----
BASE:
- Added a new paramter iqtype to FW_IQ_CMD to identify the ingress NIC or
offload queues. This fixes an issue where driver was receiving interrupt with
no new messages in queue.
FOFCoE:
- Fixes a fw hang while creating NPIV.
Enhancements
------------
ETH:
- A new WR FW_ETH_TX_PKTS_VM_WR added to support VM packet coalescing.
================================================================================
Version : 1.18.4.0
Date : 02/28/2018
================================================================================
Enhancements
------------
BASE:
- Added a new firmware API to retrieve the maximum temperaturethreshold for
the chip (FW_PARAM_DEV_DIAG_MAXTMPTHRESH).
================================================================================
Version : 1.17.14.0
Date : 12/27/2017
================================================================================
FIXES
-----
BASE:
- Fixed an issue in vlan acl which was limiting vlan range to 1024.
MFC after: 3 days
Sponsored by: Chelsio Communications
This allows create/delete/attach/detach namespaces on new NVMe controllers.
This is only a first user-level part of the bigger change set. Kernel part
required to detect and handle the configuration changes without reboot is
completely independent and will be added separately.
Submitted by: Matt Williams <mffbsdw@gmail.com> (original version)
Differential Revision: https://reviews.freebsd.org/D11399
warning:
make[3]: "/usr/src/share/mk/bsd.prog.mk" line 274: warning: duplicate
script for target "_scriptsinstall" ignored
make[3]: "/usr/src/share/mk/bsd.prog.mk" line 274: warning: using
previous script for "_scriptsinstall" defined here
Reviewed by: kevans
The POWER9 MMU (PowerISA 3.0) is slightly different from current
configurations, using a partition table even for hypervisor mode, and
dropping the SDR1 register. Key off the newly early-enabled CPU features
flags for the new architecture, and configure the MMU appropriately.
The POWER9 MMU ignores the "PSIZ" field in the PTCR, and expects a 64kB
table. As we are enabled for powernv (hypervisor mode, no VMs), only
initialize partition table entry 0, and zero out the rest. The actual
contents of the register are identical to SDR1 from previous architectures.
Along with this, fix a bug in the page table allocation with very large
memory. The table can be allocated on any 256k boundary. The
bootstrap_alloc alignment argument is an int, and with large amounts of
memory passing the size of the table as the alignment will overflow an
integer. Hard-code the alignment at 256k as wider alignment is not
necessary.
Reviewed by: nwhitehorn
Tested by: Breno Leitao
Relnotes: Yes
The new POWER9 MMU configuration is slightly different from current setups.
Rather than special-casing on POWER9, move the initialization of cpu_features
and cpu_features2 to as early as possible, so that platform and MMU
configuration can be based upon CPU features instead of specific CPUs if at all
possible.
Reviewed by: nwhitehorn
POWER8 and POWER9 have similar configuration requirements for hypervisor setup,
and in the cases here they're identical. Add the POWER9 constant to the POWER8
list so it's initialized correctly.
Reviewed by: nwhitehorn
Originally, I overlooked that PMIO register 0xc0 has a dual personality.
It can either be S5/Reset Status register or Misc. Fix register (aka
debug status register). The mode is controlled by bit 2 in PMIO
register 0xc4. Apparently there are register programming requirements
for the second personality, so many BIOSes leave the register, after
programming it, in that mode. So, we need to switch the register to the
correct mode.
Additionally, AMDSB8_WD_RST_STS was defined incorrectly as bit 13 while
it is actually bit 25 (and the register's width is 32 bits, not 16).
With this change I see the following in dmesg after a reset by the
watchdog:
amdsbwd0: ResetStatus = 0x42000000
amdsbwd0: Previous Reset was caused by Watchdog
MFC after: 2 weeks
For most buses all children are equal, so the order does not matter.
Other buses, such as acpi, carefully order their child devices to
express implicit dependencies between them. For such buses it is safer
to bring down devices in the reverse order.
I believe that this is the reason why hpet_suspend had to be disabled.
Some drivers depend on a working event timer until they are suspended.
But previously we would suspend hpet very early.
I tested this change by makinbg hpet_suspend actually stop HPET timers
and tested that too.
Note that this change is not a complete solution as it does not take
into account bus passes.
A better approach would be to track the actual attach order of the
devices and to use the reverse of that.
Reviewed by: imp, mav
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D15291
by doing most of the work in a new function prison_add_vfs in kern_jail.c
Now a jail-enabled filesystem need only mark itself with VFCF_JAIL, and
the rest is taken care of. This includes adding a jail parameter like
allow.mount.foofs, and a sysctl like security.jail.mount_foofs_allowed.
Both of these used to be a static list of known filesystems, with
predefined permission bits.
Reviewed by: kib
Differential Revision: D14681
satisfying a requirement to allow FreeBSD to be considered
a top-tier supported OS in Google Compute Engine.
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
a gpio pin. If neither of the options is specified, pre-set the pin's
output value to the pin's current input value, to achieve glitch-free
transitions to output mode on pins that are pulled up or down at reset
or via fdt pinctrl data.
With r332974, when performing a synchronized access of a page's "queue"
field, one must first check whether the page is logically dequeued. If
so, then the page lock does not prevent the page from being removed
from its page queue. Intoduce vm_page_queue(), which returns the page's
logical queue index. In some cases, direct access to the "queue" field
is still required, but such accesses should be confined to sys/vm.
Reported and tested by: pho
Reviewed by: kib
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D15280
mode or not. An earlier attempt to make this work was done in r320456, by
always reading the pad status register (PSR) instead of the data register.
But it turns out the values in PSR only reflect the electrical level of an
output pin if the pad is configured with the SION (Set Input On) bit in the
pinmux config, and most output gpio pads are not configured that way.
So now a gpio read is done by returning the value from the data register,
which works right whether the pin is configured for input or output, unless
the pin has been set for OPENDRAIN mode, in which case the PSR is read
instead. For this to work, the pin must also be configured with SION turned
on in the fdt pinmux data, which is a reasonable thing to require for the
unusual case of reading an open-drain output pin.
In r301567, code was added to cleanup to prevent memory leaks for the
Tx and Rx ring structs. This code carefully tracked txq and rxq, and
made sure to free them properly during cleanup.
Because we assigned the txq and rxq pointers into the ctx->ifc_txqs and
ctx->ifc_rxqs, we carefully reset these pointers to NULL, so that
cleanup code would not accidentally free the memory twice.
This was changed by r304021 ("Update iflib to support more NIC designs"),
which removed this resetting of the pointers to NULL, because it re-used
the txq and rxq pointers as an index into the queue set array.
Unfortunately, the cleanup code was left alone. Thus, if we fail to
allocate DMA or fail to configure the queues using the drivers ifdi
methods, we will attempt to free txq and rxq. These variables would now
incorrectly point to the wrong location, resulting in a page fault.
There are a number of methods to correct this, but ultimately the root
cause was that we reuse the txq and rxq pointers for two different
purposes.
Instead, when allocating, store the returned pointer directly into
ctx->ifc_txqs and ctx->ifc_rxqs. Then, assign this to txq and rxq as
index pointers before starting the loop to allocate each queue.
Drop the cleanup code for txq and rxq, and only use ctx->ifc_txqs and
ctx->ifc_rxqs.
Thus, we no longer need to free txq or rxq under any error flow, and
intsead rely solely on the pointers stored in ctx->ifc_txqs and
ctx->ifc_rxqs. This prevents the invalid free(), and ensures that we
still properly cleanup after ourselves as before when failing to
allocate.
Submitted by: Jacob Keller
Reviewed by: gallatin, sbruno
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D15285
This pointer was no longer written to as of r315217. Since nothing writes
to the variable, remove it.
Submitted by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed by: gallatin, kmacy, sbruno
Differential Revision: https://reviews.freebsd.org/D15284
The monotonic clock is more appropriate than the realtime clock for
measuring durations.
Reviewed by: ken, jilles
Differential Revision: https://reviews.freebsd.org/D14032
zones. This does not affect the vast majority of users who do not care about
(or even know about) the tm_isdst flag but may be slightly surprising to those
with a more specialised interest in time zone arcana.
MFC after: 3 days
In r309610 and r315514 the behavior of handling EACCES was changed, and
tcp_output() now returns zero when EACCES happens. The reason of this
change was a hesitation that applications that use TCP-MD5 will be
affected by changes in project/ipsec.
TCP-MD5 code returns EACCES when security assocition for given connection
is not configured. But the same error code can return pfil(9), and this
change has affected connections blocked by pfil(9). E.g. application
doesn't return immediately when SYN segment is blocked, instead it waits
when several tries will be failed.
Actually, for TCP-MD5 application it doesn't matter will it get EACCES
after first SYN, or after several tries. Security associtions must be
configured before initiating TCP connection.
I left the EACCES in the switch() to show that it has special handling.
Reported by: Andreas Longwitz <longwitz at incore dot de>
MFC after: 10 days
x dup_before
+ dup_after
+------------------------------------------------------------+
| x + |
|x x x x ++ ++|
| |____AM___| |AM||
+------------------------------------------------------------+
N Min Max Median Avg Stddev
x 5 1.514954e+08 1.5230351e+08 1.5206157e+08 1.5199371e+08 341205.71
+ 5 1.5494336e+08 1.5519569e+08 1.5511982e+08 1.5508323e+08 96232.829
Difference at 95.0% confidence
3.08952e+06 +/- 365604
2.03266% +/- 0.245071%
(Student's t, pooled s = 250681)
Reported by: mjg@
MFC after: 1 week
The code was unnecessarily conditionally copying either 5 or 6 args.
It can blindly copy 6, which also means the size is known at compilation
time and the operation can be depessimized.
Note the entire syscall handling code is rather slow.
Tested on Skylake, sample result for getppid (calls/s):
without pti: 7310106 -> 10653569
with pti: 3304843 -> 4148306
Some syscalls (like read) did not note any difference, other have typically
very modest wins.
This fixes a regression that happened in r120492 (2003) where libkiconv
was introduced and we went from checking unlen to checking for '\0'.
PR: 111843
Patch by: Damjan Jovanovic
MFC after: 1 week
It was an old TRE that had plenty of bugs and no performance gain over
regex(3). I disabled it by default in r323615, and there was some confusion
about what the knob does- likely due to poor naming on my part- to the tune
of "well, it sounds like it should speed things up" (mentioned by multiple
people).
To compound this, I have no intention of maintaining a second regex
implementation. If someone would like to step up and volunteer to maintain a
lean-and-mean implementation for grep, this is OK, but we have very few
volunteers to maintain even our primary regex implementation.
The prior code only allowed multiples of 32 for the
numbers of columns. Remove this restriction to allow
a forthcoming UEFI firmware update to allow arbitrary
x,y resolutions.
(the code for handling rows already supported non mult-32 values)
Reviewed by: Leon Dang (original author)
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D15274
FAT32 partition with LBA addressing.
Reviewed by: marcel
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D15266
GPUs often have a VGA PCI class code and are probed/attached
by the VGA driver. Allow them to be detached so they can
be presented as passthru devices to VM guests.
Submitted by: mmacy
Reviewed by: jhb, imp, rgrimes
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D15269
ifuncs on x86.
Also keep helpers to define 'pseudo-ifuncs' which are emulated by the
indirect jmp.
Reviewed by: jhb (previous version, as part of the larger patch)
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D13838
Required MD bits are only provided for x86.
Reviewed by: jhb (previous version, as part of the larger patch)
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D13838
The 4.16 DTS import brought in emac support for the a83t. Since these
boards' DTS is pulled from /boot and I forgot to hook these up to the build,
they should be fairly safe to go away.
The a83t-sid and h3-sid overlays are still relevant. a83t-sid will likely
come in with 4.18 DTS.
