This has the useful side-effect of ensuring that opt_smp.h is
always generated, so we can assume it will always be available.
Prompted by: Andrew Gallatin <gallatin@cs.duke.edu>
out interrupts for too long. If you still see the "calcru: negative
time..." message you can increase NTIMECOUNTER (see LINT).
Sideeffect is that a timecounter is required to not wrap around in
less than (1 + delta) seconds instead of the (1/hz + delta) required
until now.
Many thanks to: msmith, wpaul, wosch & bde
file to a stream socket. sendfile(2) is similar to implementations in
HP-UX, Linux, and other systems, but the API is more extensive and
addresses many of the complaints that the Apache Group and others have
had with those other implementations. Thanks to Marc Slemko of the
Apache Group for helping me work out the best API for this.
Anyway, this has the "net" result of speeding up sends of files over
TCP/IP sockets by about 10X (that is to say, uses 1/10th of the CPU
cycles) when compared to a traditional read/write loop.
timeouts in the SA driver (timeouts for space, rewind and erase). Folks
can lengthen the timeouts if their hardware is especially slow, or shorten
them if they want to be notified of errors a little sooner.
Also, get rid of two OD driver options. The od driver has been made
obsolete by the da driver.
Reviewed by: ken, gibbs
Submitted by: Dag-Erling Coidan Smørgrav <des@FreeBSD.ORG>
The last consumer of this code (the old SCSI system) has left us and
the CAM code does it's own bouncing. The isa dma system has been
doing it's own bouncing for a while too.
Reviewed by: core
===================================
HARP | Host ATM Research Platform
===================================
HARP 3
What is this stuff?
-------------------
The Advanced Networking Group (ANG) at the Minnesota Supercomputer Center,
Inc. (MSCI), as part of its work on the MAGIC Gigabit Testbed, developed
the Host ATM Research Platform (HARP) software, which allows IP hosts to
communicate over ATM networks using standard protocols. It is intended to
be a high-quality platform for IP/ATM research.
HARP provides a way for IP hosts to connect to ATM networks. It supports
standard methods of communication using IP over ATM. A host's standard IP
software sends and receives datagrams via a HARP ATM interface. HARP provides
functionality similar to (and typically replaces) vendor-provided ATM device
driver software.
HARP includes full source code, making it possible for researchers to
experiment with different approaches to running IP over ATM. HARP is
self-contained; it requires no other licenses or commercial software packages.
HARP implements support for the IETF Classical IP model for using IP over ATM
networks, including:
o IETF ATMARP address resolution client
o IETF ATMARP address resolution server
o IETF SCSP/ATMARP server
o UNI 3.1 and 3.0 signalling protocols
o Fore Systems's SPANS signalling protocol
What's supported
----------------
The following are supported by HARP 3:
o ATM Host Interfaces
- FORE Systems, Inc. SBA-200 and SBA-200E ATM SBus Adapters
- FORE Systems, Inc. PCA-200E ATM PCI Adapters
- Efficient Networks, Inc. ENI-155p ATM PCI Adapters
o ATM Signalling Protocols
- The ATM Forum UNI 3.1 signalling protocol
- The ATM Forum UNI 3.0 signalling protocol
- The ATM Forum ILMI address registration
- FORE Systems's proprietary SPANS signalling protocol
- Permanent Virtual Channels (PVCs)
o IETF "Classical IP and ARP over ATM" model
- RFC 1483, "Multiprotocol Encapsulation over ATM Adaptation Layer 5"
- RFC 1577, "Classical IP and ARP over ATM"
- RFC 1626, "Default IP MTU for use over ATM AAL5"
- RFC 1755, "ATM Signaling Support for IP over ATM"
- RFC 2225, "Classical IP and ARP over ATM"
- RFC 2334, "Server Cache Synchronization Protocol (SCSP)"
- Internet Draft draft-ietf-ion-scsp-atmarp-00.txt,
"A Distributed ATMARP Service Using SCSP"
o ATM Sockets interface
- The file atm-sockets.txt contains further information
What's not supported
--------------------
The following major features of the above list are not currently supported:
o UNI point-to-multipoint support
o Driver support for Traffic Control/Quality of Service
o SPANS multicast and MPP support
o SPANS signalling using Efficient adapters
This software was developed under the sponsorship of the Defense Advanced
Research Projects Agency (DARPA).
Reviewed (lightly) by: phk
Submitted by: Network Computing Services, Inc.
Added PR kern/7177 for SECAM Video Highway Xtreme with single crystal
PLL configuration submitted by Vsevolod Lobko <seva@alex-ua.com>.
In kernel configuration file add
options OVERRIDE_CARD=2
options OVERRIDE_TUNER=11
options BKTR_USE_PLL
Submitted by: Roger Hardiman <roger@cs.strath.ac.uk>
Normally the full 640x480 (768x576 PAL) image is grabbed. This ioctl
allows a smaller area from anywhere within the video image to be
grabbed, eg a 400x300 image from (50,10).
See restrictions in BT848SCAPAREA.
Submitted by: Roger Hardiman <roger@cs.strath.ac.uk>
NFS_MINATTRTIMO VREG attrib cache timeout in sec
NFS_MAXATTRTIMO
NFS_MINDIRATTRTIMO VDIR attrib cache timeout in sec
NFS_MAXDIRATTRTIMO
NFS_GATHERDELAY Default write gather delay (msec)
NFS_UIDHASHSIZ Tune the size of nfssvc_sock with this
NFS_WDELAYHASHSIZ and with this
NFS_MUIDHASHSIZ Tune the size of nfsmount with this
NFS_NOSERVER (already documented in LINT)
NFS_DEBUG turn on NFS debugging
also, because NFS_ROOT is used by very different files, it has been
renamed to opt_nfsroot.h instead of the old opt_nfs.h....
FreeBSD/alpha. The most significant item is to change the command
argument to ioctl functions from int to u_long. This change brings us
inline with various other BSD versions. Driver writers may like to
use (__FreeBSD_version == 300003) to detect this change.
The prototype FreeBSD/alpha machdep will follow in a couple of days
time.
so that the new behaviour is now default.
Solves the "infinite loop in diversion" problem when more than one diversion
is active.
Man page changes follow.
The new code is in -stable as the NON default option.
Prior to this change, Accidental recursion protection was done by
the diverted daemon feeding back the divert port number it got
the packet on, as the port number on a sendto(). IPFW knew not to
redivert a packet to this port (again). Processing of the ruleset
started at the beginning again, skipping that divert port.
The new semantic (which is how we should have done it the first time)
is that the port number in the sendto() is the rule number AFTER which
processing should restart, and on a recvfrom(), the port number is the
rule number which caused the diversion. This is much more flexible,
and also more intuitive. If the user uses the same sockaddr received
when resending, processing resumes at the rule number following that
that caused the diversion. The user can however select to resume rule
processing at any rule. (0 is restart at the beginning)
To enable the new code use
option IPFW_DIVERT_RESTART
This should become the default as soon as people have looked at it a bit
_KPOSIX_PRIORITY_SCHEDULING options to work. Changes:
Change all "posix4" to "p1003_1b". Misnamed files are left
as "posix4" until I'm told if I can simply delete them and add
new ones;
Add _POSIX_PRIORITY_SCHEDULING system calls for FreeBSD and Linux;
Add man pages for _POSIX_PRIORITY_SCHEDULING system calls;
Add options to LINT;
Minor fixes to P1003_1B code during testing.
