Commit Graph

17801 Commits

Author SHA1 Message Date
Søren Schmidt
3082a6dc59 Add DMA support for the VIA 82C586 & 82C686 chips, also rearrange
to fall back to slower speeds if the faster ones fails to probe.

Log and retry request on UDMA CRC errors.

Fix a couple of warnings.
1999-11-24 21:40:05 +00:00
Søren Schmidt
84d1d01b7a Add 3 more parts of the VIA 82C686. 1999-11-24 21:07:29 +00:00
Poul-Henning Kamp
9b962c56a4 General clean-up of socket.h and associated sources to synchronise up
with NetBSD and the Single Unix Specification v2.

This updates some structures with other, almost equivalent types and
effort is under way to get the whole more consistent.

Also removes a double definition of INET6 and some other clean-ups.

Reviewed by: green, bde, phk
Some part obtained from: NetBSD, SUSv2 specification
1999-11-24 20:49:04 +00:00
Daniel C. Sobral
c124b1392d Activates password protection (if a password is defined).
Adds $FreeBSD$.
1999-11-24 17:59:37 +00:00
Daniel C. Sobral
d2290dd57e Add silly password feature. If people want to depend on a flawed
security measures, so be it. It costs us almost nothing.

Document some code in support.4th that I was unable to understand
just by reading.
1999-11-24 17:56:40 +00:00
Julian Elischer
62811dad5a Expand the field width for subtypes. We had already overflowed it
by 2 with people just adding numbers on the end of the ethernet subtypes.
We now have an additional 14 subtypes available in ethernet.
Use one of them immediatly for homePNA.

Reviewed by: Garrett Wollman <wollman@khavrinen.lcs.mit.edu>
1999-11-24 02:40:12 +00:00
Archie Cobbs
25792ef324 Change the prototype of the strto* routines to make the second
parameter a char ** instead of a const char **.  This make these
kernel routines consistent with the corresponding libc userland
routines.

Which is actually 'correct' is debatable, but consistency and
following the spec was deemed more important in this case.

Reviewed by (in concept):	phk, bde
1999-11-24 01:03:08 +00:00
Brian Somers
a86ab8174f Only emit the ``wrong ifa'' message if the matching interface
is neither IFF_LOOPBACK or IFF_POINTOPOINT.  It's quite common
(and probably more correct) to route local IP numbers via lo0
and it makes configuration easier to assign the hostname address
to local POINTOPOINT links too.

This message usually remains hidden because the loopback interface
gets the highest interface number at boot time, but when the
ethernet interface is added later, the message can get pretty
annoying.

Also, fix a typo.

Not objected to by: freebsd-net
1999-11-23 22:30:01 +00:00
Guido van Rooij
5cb2cd9453 Add ipfilter kld and wire it in. 1999-11-23 22:18:17 +00:00
Guido van Rooij
47e3b8ce13 Get rid of useless osreldate include for KLD/LKM modules (sys/param.h
already carries what is needed).
This is needed for the KLD support.
1999-11-23 22:16:41 +00:00
Guido van Rooij
9cc86ee930 Add kernel parts of revived ipfilter (3.3.3.) 1999-11-23 21:44:59 +00:00
Matthew Dillon
4453311409 Even better then using %fs:0 in our locked synchronizing instruction,
we instead use 0(%esp), which is per-cpu, already pretty much
    guarenteed to be locked into the cache, and does not stress the cache's
    set associativity.  invlpg might also be a good choice (suggested by
    Ingo).

Obtained from:	Linus Torvalds <torvalds@transmeta.com>
1999-11-23 20:07:39 +00:00
Matthew Dillon
87c8f0c0f2 Add in required instruction serialization prior to releasing the
MP lock for the last time.  The use of a locked instruction to
    cpu-private memory is 3x faster then CPUID and 3x faster then the
    use of a locked instruction to shared memory (the lock itself).

    Instruction serialization is required to ensure that any pending
    memory ops are properly flushed prior to the release of the lock,
    due to out-of-order instruction execution by the cpu.
1999-11-23 18:46:09 +00:00
Marcel Moolenaar
84eadd6305 Add .ORDER which is needed for the previous commit to work with -jN.
Pointed out by: bde
1999-11-23 17:18:52 +00:00
Daniel C. Sobral
8a3f7b6ba9 Add machine-specific include path to ficl's sysdep.h. Wishes I had
gone to bed earlier.

Pointed by: peter
1999-11-23 16:30:48 +00:00
Daniel C. Sobral
0ae220095f Revert ill-considered simplification in 1.13.
Pointed by: peter
1999-11-23 16:28:39 +00:00
Daniel C. Sobral
83b912c6e6 Improve Makefile by using .PATH.
Taught by: peter
1999-11-23 15:55:28 +00:00
Daniel C. Sobral
8967d5f42e Improve on ficl port to alpha.
Files sysdep.[ch] are now in ${MACHINE_ARCH} subdirectory. Internal
#if's used to identify the platform where removed.

Make rule for target testmain was greatly simplified, because it was
easier simplifying it than changing it to support the new location of
sysdep.[ch].

(a repo-copy was done on sysdep.[ch], of course)
1999-11-23 15:24:30 +00:00
Daniel C. Sobral
99915e5b91 (Hopefully) make all necessary changes for ficl to support alpha. 1999-11-23 11:17:37 +00:00
Marcel Moolenaar
5f644e4c72 vnode_if.sh makes both vnode_if.c and vnode_if.h. Add vnode_if.c to
the LHS of the rule for vnode_if.h. This solves a "dunno how to make"
error.
1999-11-23 10:17:36 +00:00
Alan Cox
2ed14a92db Correct the following error: vm_map_pageable() on a COW'ed (post-fork)
vm_map always failed because vm_map_lookup() looked at
 "vm_map_entry->wired_count" instead of "(vm_map_entry->eflags &
 MAP_ENTRY_USER_WIRED)".  The effect was that many page
 wiring operations by sysctl were (silently) failing.
1999-11-23 06:51:28 +00:00
Yoshinobu Inoue
e1da8747e7 Removed IPSEC and IPV6FIREWALL because they are not ready yet. 1999-11-23 05:42:36 +00:00
Brian Feldman
9a46ff715e Fix a confusion between osigcontext and ucontext_t in the previous commit.
Since an osigcontext is smaller, if you check for a valid (much larger sized)
ucontext_t and it fails, we bogusly would reject the osigcontext as per
rev 1.378.  Instead, check for osigcontext range validity first, and
ucontext_t later.  This unbreaks Netscape.

Pointed to the right commit by:	peter
1999-11-23 04:09:13 +00:00
Yoshinobu Inoue
af4f75caf0 Temporaly re-enable IPSEC and IPV6FIREWALL to make the kernel buildable
with INET6
(I'll fix those dependency later, Sorry)

PR:		kern/15053
Submitted by:	ssar@stacken.kth.se
1999-11-23 02:01:49 +00:00
Cameron Grant
54671c035c fix panic for large writes in non-blocking mode 1999-11-22 21:16:01 +00:00
Cameron Grant
29618c3ae2 fix mixer to return properly scaled values 1999-11-22 16:20:48 +00:00
Peter Wemm
3ac8285030 Add pcm entries for the alpha too, since they were taken out of
conf/files and moved to i386/conf/files.i386

Forgotten by: tanimura
1999-11-22 16:10:26 +00:00
Peter Wemm
9565e721cb Update the Alpha makefile to be more in line with the x86 version. It
was getting quite dated.  Attempt to minimize diffs between the two so
it's not as painful to do this next time.
1999-11-22 15:39:13 +00:00
Poul-Henning Kamp
24e7ab7c0b Isolate the swapdev_vp "not quite" vnode in the only source file which
needs it now that /dev/drum is gone.

Reviewed by: eivind, peter
1999-11-22 15:27:09 +00:00
Peter Wemm
0171aaede2 Use %ll instead of %q as gcc moans bitterly about it. 1999-11-22 15:23:58 +00:00
Poul-Henning Kamp
8f52148e89 Isolate the swapdev_vp "not quite" vnode in the only source file which
needs it now that /dev/drum is gone.

Reviewed by: eivind, peter
1999-11-22 15:17:59 +00:00
Peter Wemm
33f86cee91 Zap some latent problems hidden by differences between KERNEL and _KERNEL.
The KAME code intruduces _KERNEL, which exposes some of them.
1999-11-22 15:14:56 +00:00
Nick Hibma
28d38bdf15 Fix some bugs in user-end output and add a reference to the original
copyright in the resulting file.
1999-11-22 14:40:04 +00:00
Nick Hibma
c577d56d33 Feh, kind of went wrong the previous commit. dev should child (in some
cases) plus a typo.
1999-11-22 14:39:21 +00:00
Nick Hibma
4755ea009e Add MOUSE_MSC_MAXBUTTON and MOUSE_IF_USB. 1999-11-22 14:38:11 +00:00
Andrew Gallatin
0e7e521cf3 Allow a DMA channel of 0. This gets the on-board mss audio device working
on Digital AlphaStations 200 and 500 machines (and probably others as well).

Submitted by: dfr
1999-11-22 14:30:41 +00:00
Yoshinobu Inoue
255717e065 Temporaly remove IPSEC and IPV6FIREWALL related options because they are not
ready for build yet.

Commented by: des
1999-11-22 13:25:21 +00:00
Yoshinobu Inoue
51f4c15279 move INET6 option from GENERIC to LINT.
Thanks for Brian Fundakowski Feldman and Dag-Erling Smorgrav,
to give me the comment and the patch.

Submitted by:Dag-Erling Smorgrav
1999-11-22 11:13:00 +00:00
Poul-Henning Kamp
38224dcd59 Convert various pieces of code to use vn_isdisk() rather than checking
for vp->v_type == VBLK.

In ccd: we don't need to call VOP_GETATTR to find the type of a vnode.

Reviewed by:    sos
1999-11-22 10:33:55 +00:00
Seigo Tanimura
125fdb9848 Comment out the newmidi stuff. 1999-11-22 10:28:05 +00:00
Brian Feldman
f7597900e9 Add vnode_if.c to CLEANFILES. 1999-11-22 06:38:30 +00:00
Brian Feldman
dc6fe48461 Change a CLEANFILES misspelling to get miibus_if.h removed. 1999-11-22 06:38:13 +00:00
Brian Feldman
aad0fe3efa Make this compile (remove vnode_if.c from SRCS) and clean properly
(add opt_bus.h to CLEANFILES).
1999-11-22 06:36:25 +00:00
Seigo Tanimura
46d6fe727e Add the descriptions of the bridge drivers for Sound Blaster, GUS
and Crystal Semiconductor CS461x/428x.
1999-11-22 06:10:25 +00:00
Seigo Tanimura
e2dc359f4c - Introduce the bridge drivers for Sound Blaser, GUS and Crystal
Semiconductor CS461x/428x.
- Add support for GUS and CS461x/428x pcm.
- Move newpcm drivers for ISA cards to files.i386. The drivers for
  PC98 would be something quite different from those for PC/AT.

Moving requested by:	nyan
1999-11-22 06:09:24 +00:00
Seigo Tanimura
fe1a5d1c2f - Introduce the bridge drivers for Sound Blaser, GUS and Crystal
Semiconductor CS461x/428x.
- Add support for GUS and CS461x/428x pcm.

Bridges reviewed by:			dfr, cg
GUS non-PnP support submitted by:	Ville-Pertti Keinonen <will@iki.fi>
GUS PnP support tested by:		Michiru Saito <mich@mtci.ne.jp>
1999-11-22 06:07:49 +00:00
Matthew Dillon
b314ed9662 nm_srtt and nm_sdrtt are arrays[4]. Remove explicit initialization
of element [4] in both, which goes beyond the end of the array, leaving
    [0], [1], [2], and [3].  This bug did not cause any problems since
    the overrun fields are initialized after the bogus array init but
    needs to be fixed anyway.

Submitted by:	 Ian Dowse <iedowse@maths.tcd.ie>
1999-11-22 04:50:09 +00:00
Nick Hibma
384781000e Add comments on what it the USB modules are. Add the usb module.
The USB module contains the OHCI and UHCI controllers as well.
Sticking them into separate modules might be possible after I have
untangled the mess.
1999-11-22 04:08:37 +00:00
Nick Hibma
8103624a82 Clean up the Makefiles, make them consistent with the others and remove
debugging falgs (-g).
1999-11-22 03:55:33 +00:00
Nick Hibma
256c40438f Add the usb module and move the USB related modules into the generic section
USB seems to compile on Alpha's as well.
1999-11-22 03:48:33 +00:00