This patch addes missing implementation of BHND_BUS_RESET_CORE function for BCMA.
The reset procedure is very simple: enable reset mode, stop clocking,
enable clocking & force clock gating, disable reset mode, stop clock gating.
Tested:
* (michael) Tested on ASUS RT-N53 for enabling/reset USB core
Submitted by: Michael Zhilin <mizhka@gmail.com>
Approved by: re (gjb)
We also need to consider the size of large firmware commands in iwm_alloc_tx_ring(),
in the dma tag creation, when qid == IWM_MVM_CMD_QUEUE. The old code apparently
only allocated a 2KB (MCLBYTES) sized buffer when it actually expected 4KB.
Submitted by: Imre Vadasz <imre@vdsz.com>
Approved by: re (gjb)
Differential Revision: https://reviews.freebsd.org/D6824
(Together with other iwm(4) memory leak fixes) Memory leakage in M_DEVBUF
is now at ca. 2KB for each iwm(4) module load/unload cycle.
Submitted by: Imre Vadasz <imre@vdsz.com>
Approved by: re (gjb)
Obtained from: DragonflyBSD git eaf551a1d464c643e98ce5781971dd32124e9af1
Differential Revision: https://reviews.freebsd.org/D6819
* When bus_dmamem_alloc is used, the bus_dmamap_t is usually set to NULL, so
we were never actually freeing any dma memory allocations done via
iwm_dma_contig_alloc(). So we should check dma->vaddr instead of dma->map here.
* Also, the dmamap is actually supposed to be invalidated as part of
bus_dmamem_free(), so bus_dmamap_destroy() is never needed here.
Submitted by: Imre Vadasz <imre@vdsz.com>
Approved by: re (gjb)
Obtained from: DragonflyBSD git ef2b29a7ba6ca8a9d2c82ab591c0622227ff84cb
ic_macaddr is only used for the initial mac address provided by NVM. We should
rather use vap->iv_myaddr when vap != NULL, to allow the MAC address
to be changed later with ifconfig(8).
Submitted by: Imre Vadasz <imre@vdsz.com>
Reviewed by: avos
Approved by: re (gjb)
Obtained from: DragonflyBSD git 4aee7a78275676d22d14c04177bd0c9377d91478
Differential Revision: https://reviews.freebsd.org/D6743
I keep asking myself "what do these fields mean" and so now I've clarified
it for myself.
Tested:
* Reading the comments, going "a-ha!" a couple times.
Approved by: re (gjb)
That way timers can finish cleanly and we do not gamble with a DELAY().
Reviewed by: gnn, jtl
Approved by: re (gjb)
Obtained from: projects/vnet
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D6923
Timewait code does a proper cleanup after itself.
Reviewed by: gnn
Approved by: re (gjb)
Obtained from: projects/vnet
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D6922
Mark the pipe() system call as COMPAT10.
As of r302092 libc uses pipe2() with a zero flags value instead of pipe().
Approved by: re (gjb)
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D6816
As of r302092 libc uses pipe2() with a zero flags value instead of pipe().
Commit with regenerated files and implementation to follow.
Approved by: re (gjb)
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D6816
value.
This eliminates the need for machine dependant assembly wrappers for
pipe(2).
It also make passing an invalid address to pipe(2) return EFAULT rather
than triggering a segfault. Document this behavior (which was already
true for pipe2(2), but undocumented).
Reviewed by: andrew
Approved by: re (gjb)
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D6815
This will result in lock recursion and is more generally incorrect since
the completion handlers will just reinsert the BIOs into the queue we're
trying to drain.
Reviewed by: imp, ngie
Approved by: re (gjb)
MFC after: 3 weeks
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D6908
There is an order between covered vnode lock and allproc_lock, which
is established by calling mountcheckdirs() while owning the covered
vnode lock. mountcheckdirs() iterates over the processes, protected by
allproc_lock. This order is needed and seems to be not avoidable.
On the other hand, various VM daemons also need to iterate over all
processes, and they lock and unlock user maps. Since unlock of the
user map may trigger processing of the deferred map entries, it causes
vnode locking to occur. Or, when vmspace is freed, dropping references
on the vnode-backed object also lock vnodes. We get reverted order
comparing with the mount/unmount order.
For VM daemons, there is no need to own allproc_lock while we operate
on vmspaces. If the process is held, it serves as the marker for
allproc list, which allows to continue the iteration.
Add _PHOLD_LITE() macro, similar to _PHOLD(), but not causing swap-in
of the kernel stacks. It is used instead of _PHOLD() in vm code,
since e.g. calling faultin() in OOM conditions only exaggerates the
problem.
Modernize comment describing PHOLD.
Reported by: lists@yamagi.org
Tested by: pho (previous version)
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 3 week
Approved by: re (gjb)
Differential revision: https://reviews.freebsd.org/D6679
after the underlying device went away.
The problem was that callers who queue the GEOM resize provider
event didn't check to make sure that the provider had not been
withered. For the other equivalent case, g_new_provider_event(),
the code checks to see whether the provider has been withered
before queueing a g_new_provider_event() to the event thread.
In some cases, a resize provider event would come through after
the provider had been withered and all of the existing consumers
had been orphaned. When the resize event triggered a taste of
the provider, that would attach a new consumer to the now
withered provider. The wither washer (g_wither_washer() would
never be able to completely tear down the GEOM because of the
consumers that were hanging around.
The solution was to check the G_PF_WITHER provider flag before
queueing the g_resize_provider_event(), and add an assert to
g_resize_provider_event() to insure that it isn't called on a
withered provider.
sys/geom/geom_subr.c:
In g_resize_provider(), don't try to continue if the
G_PF_WITHER flag is set.
In g_resize_provider_event(), add an assert that the
G_PF_WITHER flag is not set.
In g_access(), if a provider has an error, print out the
name of the provider with the error.
Sponsored by: Spectra Logic
Approved by: re (marius)
MFC after: 3 days
some fields to match the order in the struct. Especially needed
if_pf_kif to do pf(4) VNET debugging.
Approved by: re (marius)
Obtained from: projects/vnet
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
uncategorised reason. We need to read the fault address register before
enabling interrupts as the interrupt handler may cause this register to
change.
Approved by: re (marius, kib)
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
without VIMAGE support would dereference a NULL point unconditionally
leading to a panic. Wrap the entire VIMAGE related code with #ifdefs
rather than just the decision making part to save an extra bit of
resources.
Reported by: np
Sponsored by: The FreeBSD Foundation
MFC After: 13 days
Approved by: re (marius)
libusb_hotplug_deregister_callback() for the LibUSB v1.0 API and
update the libusb(3) manual page.
Approved by: re (kib)
Requested by: swills
MFC after: 1 week
version of the XHCI specification. Make sure the code can handle the
maximum number of allowed scratch pages.
Submitted by: Shichun_Ma@Dell.com
Approved by: re (hrs)
MFC after: 1 week
Update libarchive to 3.2.1 (bugfix and security fix release)
List of vendor fixes:
- fix exploitable heap overflow vulnerability in Rar decompression
(vendor issue 719, CVE-2016-4302, TALOS-2016-0154)
- fix exploitable stack based buffer overflow vulnebarility in mtree
parse_device functionality (vendor PR 715, CVE-2016-4301, TALOS-2016-0153)
- fix exploitable heap overflow vulnerability in 7-zip read_SubStreamsInfo
(vendor issue 718, CVE-2016-4300, TALOS-2016-152)
- fix integer overflow when computing location of volume descriptor
(vendor issue 717)
- fix buffer overflow when reading a crafred rar archive (vendor issue 521)
- fix possible buffer overflow when reading ISO9660 archives on machines
where sizeof(int) < sizeof(size_t) (vendor issue 711)
- tar and cpio should fail if an input file named on the command line is
missing (vendor issue 708)
- fix incorrect writing of gnutar filenames that are exactly 512 bytes
long (vendor issue 682)
- allow tests to be run from paths that are equal or longer than 128
characters (vendor issue 657)
- add memory allocation errors in archive_entry_xattr.c (vendor PR 603)
- remove dead code in archive_entry_xattr_add_entry() (vendor PR 716)
- fix broken decryption of ZIP files (vendor issue 553)
- manpage style, typo and description fixes
Post-3.2.1 vendor fixes:
- fix typo in cpio version reporting (Vendor PR 725, 726)
- fix argument range of ctype functions in libarchive_fe/passphrase.c
- fix ctype use and avoid empty loop bodies in WARC reader
MFC after: 1 week
Security: CVE-2016-4300, CVE-2016-4301, CVE-2016-4302
Approved by: re (kib)
File and disk-backed I/O requests store counts of read/written disk
blocks in each AIO job so that they can be charged to the thread that
completes an AIO request via aio_return() or aio_waitcomplete(). This
change extends AIO jobs to store counts of received/sent messages and
updates socket backends to set these counts accordingly. Note that
the socket backends are careful to only charge a single messages for
each AIO request even though a single request on a blocking socket might
invoke sosend or soreceive multiple times. This is to mimic the
resource accounting of synchronous read/write.
Adjust the UNIX socketpair AIO test to verify that the message resource
usage counts update accordingly for aio_read and aio_write.
Approved by: re (hrs)
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D6911
The DPADD data in .depend will be redundant with what is in the .meta file.
Also extend NO_EXTRADEPEND support to bsd.prog.mk.
Approved by: re (blanket, META_MODE)
Sponsored by: EMC / Isilon Storage Division
device is gone.
The problem was that when disk_gone() is called, if the GEOM disk
creation process has not yet happened, the withering process
couldn't start.
We didn't record any state in the GEOM disk code, and so the d_gone()
callback to the da(4) driver never happened.
The solution is to track the state of the creation process, and
initiate the withering process from g_disk_create() if the disk is
being created.
This change does add fields to struct disk, and so I have bumped
DISK_VERSION.
geom_disk.c: Track where we are in the disk creation process,
and check to see whether our underlying disk has
gone away or not.
In disk_gone(), set a new d_goneflag variable that
g_disk_create() can check to see if it needs to
clean up the disk instance.
geom_disk.h: Add a mutex to struct disk (for internal use) disk
init level, and a gone flag.
Bump DISK_VERSION because the size of struct disk has
changed and fields have been added at the beginning.
Sponsored by: Spectra Logic
Approved by: re (marius)
fully-pessimized implementation that requires a type to be aligned to
its natural size.
On armv6+ the compiler might generate load-/store-multiple instructions
which require 4-byte alignment even though the source code is only
accessing individual uint32_t values in a way that doesn't require any
particular alignment at all. The compiler apparently feels free to
combine multiple accesses into a single instruction that requires a
more-strict alignment, and no set of compiler flags seems to disable
this behavior (at least in clang 3.8).
This fixes alignment faults on arm systems using wifi adapters. The
wifi code uses ALIGNED_POINTER(p, uint32_t) to decide whether it needs
to copy-align tcp headers. Because clang is combining several uint32_t
accesses into a single ldm instruction, we need to say that accessing a
uint32_t requires 4-byte alignment.
Approved by: re(gjb)
statistics. Marking is done by setting the OBJ_ACTIVE flag. The
flags change is locked, but the problem is that many parts of system
assume that vm object initialization ensures that no other code could
change the object, and thus performed lockless. The end result is
corrupted flags in vm objects, most visible is spurious OBJ_DEAD flag,
causing random hangs.
Avoid the active object marking, instead provide equally inexact but
immutable is_object_alive() definition for the object mapped state.
Avoid iterating over the processes mappings altogether by using
arguably improved definition of the paging thread as one which sleeps
on the v_free_count.
PR: 204764
Diagnosed by: pho
Tested by: pho (previous version)
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Approved by: re (gjb)
It turns out that getting decent performance requires stacking the TX
FIFO a little more aggressively.
* Ensure that when we complete a frame, we attempt to push a new frame
into the FIFO so TX is kept as active as it needs to be
* Be more aggressive about batching non-aggregate frames into a single
TX FIFO slot. This "fixes" TDMA performance (since we only get one
TX FIFO slot ungated per DMA beacon alert) but it does this by pushing
a whole lot of work into the TX FIFO slot.
I'm not /entirely/ pleased by this solution, but it does fix a whole bunch
of corner case issues in the transmit side and fix TDMA whilst I'm at it.
I'll go revisit transmit packet scheduling in ath(4) post 11.
Tested:
* AR9380, STA mode
* AR9580, hostap mode
* AR9380, TDMA client mode
Approved by: re (hrs)
rS274085 made vt(4) the default system console. Catch up to this in
the man page description for the kern.vty tunable.
Reviewed by: bz
Approved by: re (hrs)
Differential Revision: https://reviews.freebsd.org/D6901
than removing the network interfaces first. This change is rather larger
and convoluted as the ordering requirements cannot be separated.
Move the pfil(9) framework to SI_SUB_PROTO_PFIL, move Firewalls and
related modules to their own SI_SUB_PROTO_FIREWALL.
Move initialization of "physical" interfaces to SI_SUB_DRIVERS,
move virtual (cloned) interfaces to SI_SUB_PSEUDO.
Move Multicast to SI_SUB_PROTO_MC.
Re-work parts of multicast initialisation and teardown, not taking the
huge amount of memory into account if used as a module yet.
For interface teardown we try to do as many of them as we can on
SI_SUB_INIT_IF, but for some this makes no sense, e.g., when tunnelling
over a higher layer protocol such as IP. In that case the interface
has to go along (or before) the higher layer protocol is shutdown.
Kernel hhooks need to go last on teardown as they may be used at various
higher layers and we cannot remove them before we cleaned up the higher
layers.
For interface teardown there are multiple paths:
(a) a cloned interface is destroyed (inside a VIMAGE or in the base system),
(b) any interface is moved from a virtual network stack to a different
network stack ("vmove"), or (c) a virtual network stack is being shut down.
All code paths go through if_detach_internal() where we, depending on the
vmove flag or the vnet state, make a decision on how much to shut down;
in case we are destroying a VNET the individual protocol layers will
cleanup their own parts thus we cannot do so again for each interface as
we end up with, e.g., double-frees, destroying locks twice or acquiring
already destroyed locks.
When calling into protocol cleanups we equally have to tell them
whether they need to detach upper layer protocols ("ulp") or not
(e.g., in6_ifdetach()).
Provide or enahnce helper functions to do proper cleanup at a protocol
rather than at an interface level.
Approved by: re (hrs)
Obtained from: projects/vnet
Reviewed by: gnn, jhb
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D6747
tests/sys/acl/Makefile
add perl to the required_programs for all tests in this directory
Reviewed by: ngie
Approved by: re (gjb)
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D6870
1) Unload mbuf instead of descriptor in rtwn_tx_done().
2) Add more synchronization for device visible mappings before
touching the memory.
3) Improve watchdog timer logic.
Reported and tested by: mva
Approved by: re (gjb)
Remove frames from active/pending Tx queues and free related node
references when vap is destroyed to prevent various use-after-free
scenarios.
Reported and tested by: Aleksander Alekseev <afiskon@devzen.ru>
PR: 208632
Approved by: re (gjb)
Use MPI2_IOCSTATUS_MASK when checking IOCStatus to mask off the log bit, and
make a few more things endian-safe.
- Fix possible use of invalid pointer.
It was possible to use an invalid pointer to get the target ID value. To fix
this, initialize a local Target ID variable to an invalid value and change that
variable to a valid value only if the pointer to the Target ID is not NULL.
- No need to set the MPSSAS_SHUTDOWN flag because it's never used.
- done_ccb pointer can be used if it is NULL.
To prevent this, move check for done_ccb == NULL to before done_ccb is used in
mpssas_stop_unit_done().
- Disks can go missing until a reboot is done in some cases.
This is due to the DevHandle not being released, which causes the Firmware to
not allow that disk to be re-added.
Reviewed by: ken
Approved by: re (gjb), ken, scottl, ambrisko (mentors)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D6872
Among other things, this introduces the idea of DBA-gated queues that
aren't the CABQ. The TDMA support requires this.
Tested:
* AR9580 (hostap mode)
* AR9380 (sta mode)
Approved by: re (gjb)
Serbian locales have triple components to represent the 2 variations of the
locale: Latin and Cyrillic. Previously the tools generatic the locale were
appending both definitions instead of differentiating them.
Reported by: ache
Approved by: re (gjb)
This started showing up when doing lots of aggregate traffic. For TDMA it's
always no-ACK traffic and I didn't notice this, and I didn't notice it
when doing 11abg traffic as it didn't fail enough in a bad way to trigger
this.
This showed up as the fifo depth being < 0.
Eg:
Jun 19 09:23:07 gertrude kernel: ath0: ath_tx_edma_push_staging_list: queued 2 packets; depth=2, fifo depth=1
Jun 19 09:23:07 gertrude kernel: ath0: ath_edma_tx_processq: Q1, bf=0xfffffe000385f068, start=1, end=1
Jun 19 09:23:07 gertrude kernel: ath0: ath_edma_tx_processq: Q1: FIFO depth is now 0 (1)
Jun 19 09:23:07 gertrude kernel: ath0: ath_edma_tx_processq: Q1, bf=0xfffffe0003866fe8, start=0, end=1
Jun 19 09:23:07 gertrude kernel: ath0: ath_edma_tx_processq: Q1: FIFO depth is now -1 (0)
So, clear the flags before adding them to a TX queue, so if they're
re-added for the retransmit path it'll clear whatever they were and
not double-account the FIFOEND flag. Oops.
Tested:
* AR9380, STA mode, 11n iperf testing (~130mbit)
Approved by: re (delphij)
explains the plausible scenario), resulting in EDEADLK returned on the
local registration attempt. Handle this by re-trying the local op [1].
On unmount, local registration abort is indicated as EINTR, abort the nlm
call as well.
Reported and tested by: pho
Suggested and reviewed by: dfr (previous version, [1])
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Approved by: re (delphij)
