Commit Graph

766 Commits

Author SHA1 Message Date
Hajimu UMEMOTO
06a99fe36f - Extend the nsswitch to support Services, Protocols and Rpc
databases.
- Make nsswitch support caching.

Submitted by:	Michael Bushkov <bushman__at__rsu.ru>
Sponsored by:	Google Summer of Code 2005
2006-04-28 12:03:38 +00:00
Christian Brueffer
5bb234b1a6 Correct two typos in comments. 2006-04-22 13:42:49 +00:00
Florent Thoumie
455c5d38be - Add new ntpd_config variable so that people can override it in rc.conf.
- Add default value in /etc/defaults/rc.conf.
- Add documentation bits to rc.conf(5).

Approved by:	cperciva (mentor)
MFC after:	1 week
2006-04-18 15:02:24 +00:00
Brooks Davis
c1ba2105e8 Spell synchronous with required silent 'h'.
Reported by:	ru, ceri
Pointy hat:	brooks
2006-04-13 18:34:14 +00:00
Brooks Davis
c4af136d49 Commit the various network interface configutation updates I've been
working on.
  1) Make it possible to configure interfaces with certain characters in
     their names that aren't valid in shell variables.  Currently supported
     characters are ".-/+".  They are converted into '_' characters.
  2) Replace nearly all eval statements in network.subr with a new
     function get_if_var which substitues an interface name (after the
     translations above) for "IF" in a variable name.
  3) Fix list_net_interfaces() in the nodhcp case.
  4) Allow the administrator to specify if dhclient should be started
     when /etc/rc.d/netif configures the interface or only by devd.
     This can be set on both a per interface and system wide basis.

PR:	conf/88974 [1,2], conf/92433 [1,2]
2006-04-13 06:50:46 +00:00
Florent Thoumie
4016cfa64c - Fix amd startup when amd is installed from ports.
- Add the according amd_program default value in defaults.

PR:		conf/82738
Submitted by:	TAOKA Fumiyoshi <fmysh@iijmio-mail.jp>
Approved by:	cperciva (mentor)
MFC after:	3 days
2006-04-11 09:02:07 +00:00
Christian Brueffer
20780934c5 Add the graid3(8), gstripe(8) and gconcat(8) status scripts, default is "off".
Approved by:	rwatson (mentor)
2006-03-02 14:46:00 +00:00
Warner Losh
ef716ed805 Remove vestiges of OLDCARD. 2006-02-14 04:16:56 +00:00
Matteo Riondato
82d95a96b0 Add a default ldconfig32_paths entry in default/rc.conf for 32-bit compatability shared libraries.
It is used by the ldconfig rc.d scripts.
Document this variable in the man page

PR:		amd64/91571
Approved by:	philip (mentor)
MFC after:	3
2006-02-13 21:10:03 +00:00
Doug Barton
196b6a193e Overhaul the named boot script:
1. Remove a now-spurious NetBSD CVS Id, as we are no longer synching work
2. Remove a now-spurious BEFORE, since ntpdate now REQUIRE's named
3. Replace the call to set rcvar with what that function would output,
and generally reduce indirection ($name -> named) since it's highly
unlikely the name of the named process or service will change any time soon.
4. Resort the order the variables at the top of the file to a more
traditional format, and remove a spurious required_dirs from the top, as it
works better after load_rc_config.
5. We do not want the default reload method with named, so define a simple
but appropriate substitute using rndc. If I were writing this script for
the first time I would not include this at all, since it's preferable to
control a running daemon with rndc to start with, but given that this is
already here, let's do it right. I hope that future generations will
however resist the tempation to add reconfig to extra_commands.
6. By the same token, we want to use rndc to shut down named, but given
that by defining a stop function we lose the "find the process by its
pid file in an emergency" goodness of rc.subr, try to do something useful
in the event that rndc is not available, and keep the user informed.
7. Replace some "test -f" with "test -r" to handle the unlikely event
that the relevant file exists, but is unreadable.
8. Twiddle whitespace in a few areas, remove a spurious blank line,
a bogus double space, and try to do better indenting.
9. Improve generation of the rndc.key file significantly
a. If for some reason a user has an rndc.conf file, assume that they
did that on purpose, and hence know what they are doing, so leave them alone.
b. Introduce a named_uid configuration variable so that the user which owns
the rndc.key file and the user named runs as always match, and is more
easily configurable. This should dramatically reduce problems with rndc.
c. Also test that the rndc.key file size is greater than zero, rather than
simply that the file exists. I have seen at least one user report this exact
problem, and although neither of us is sure where the empty file came from,
the fix is simple, so include it.
d. Rather than try to create an rndc.key file in both /etc/namedb and the
chroot'ed /etc/namedb, assume that they are be the same (which they should
be), and only create the file in the chroot'ed version of the directory.
This partially addresses the problem described in conf/73929, but I have
not yet finished thinking about the PREFIX issue that PR also raises.

As a result of introducing the named_uid knob, the default named_flags
are now empty.

Update defaults/rc.conf and rc.conf(5) to reflect these changes.
2006-02-13 08:45:51 +00:00
Florent Thoumie
b03bfd3552 - Add a startup script for hostapd.
- Document associated variable in rc.conf(5).

Approved by:	dougb
MFC after:	1 week
2006-02-03 01:35:36 +00:00
Robert Watson
e62911a34f Add auditd_enable and auditd_flags rc.d scripts.
Obtained from:	TrustedBSD Project
2006-02-02 10:02:19 +00:00
Matteo Riondato
a192a4640a Make df output more consistent:
Remove -k now that -h is present
use -l instead of -t nonfs to match smbfs too [1]
PR:	conf/50956 [1]
Approved by:	philip (mentor)
MFC after:	3 days
2006-01-30 19:23:24 +00:00
Matteo Riondato
2bf3c1f587 Make df output in periodic mail human readable
PR:		conf/87196
Submitted by:	Mike <mspam@ideaway.net>
Approved by:	philip (mentor)
MFC after:	3 days
2006-01-30 12:33:44 +00:00
Nate Lawson
410d3bd3ac Enable the lowest Cx state by default. This will save power and we have
had enough testing of acpi_cpu to know this is stable now.
2006-01-29 05:51:58 +00:00
Yaroslav Tykhiy
24c307eac7 Add an rc.d script for stand-alone ftpd.
Document the script's controls on the rc.conf(5)
manpage and touch its Dd.

PR:		conf/90893
MFC after:	5 days
2006-01-21 18:08:16 +00:00
Garrett Wollman
9960bd718b Add a daily script to show the status of gmirror(8) devices. 2006-01-13 18:07:52 +00:00
Doug Barton
dfdae5534f Add a mechanism to include files added by ports which contain
the names of directories to include in the base ldconfig script.
This will eliminate the need for each port to install its own
boot script which does nothing but ldocnfig a given directory.

This code was developed by flz (ports committer), discussed on
freebsd-rc@, and modified slightly by me.

Submitted by:	flz
Reviewed by:	brooks
2006-01-08 10:15:31 +00:00
Doug Barton
aa5affaf3b Brooks pointed out a potential problem with disabling the X cleaning
by default, so add a new knob that is on by default, and check that
knob in start_precmd so that it can run even if cleaning /tmp is
not enabled. This has the advantage of not violating POLA, while
still allowing the user to disable this behavior if they wish (for
example on a server that will never run X).
2005-12-20 20:36:48 +00:00
Doug Barton
ea871df08c Clear up problems with /etc/rc.d/{abi|cleanvar|cleartmp} brought
to light by the PR.  Specifically, convert these three scripts
into good rc.d citizens, making sure that their functionality
is preserved, but the rc.d framework rules are not broken.

Add support for cleanvar as a regular rc.d script in the
default rc.conf, and document this in the man page.

Add a descriptive comment to rc.conf that regarding the
three emulation/compatibility services provided by abi
so users will not be confused by these services not having
their own startup scripts.

PR:		conf/84574
Submitted by:	Alexander Botero-Lowry
2005-12-19 10:57:00 +00:00
Ian Dowse
2e46a159cc Remove usbd(8) and all references to it. It is no longer necessary
since devd(8) now provides the same functionality.

Submitted by:	Anish Mistry
2005-12-15 01:04:51 +00:00
Doug Barton
57e561c083 Remove rcconf.sh from /etc/rc.d, and instead load the configuration
as part of rc. Doing this, and the sourcing of rc.subr after we have
determined if we are booting diskless (and correspondingly run
rc.initdiskless if necessary) are safe, and actually allow fewer files
to be needed on the diskless box. This also allows variables from
the configuration to be available to rc itself, such as ...

Add a variable to rc.conf, early_late_divider, which designates the
script which separates the early and late stages of the boot process.
Default this to mountcritlocal, and add text to etc/defaults/rc.conf,
rc.conf(5) and diskless(8) which describes how and why one might want
to change this.

Reviewed by:	brooks
2005-12-10 20:21:46 +00:00
Ruslan Ermilov
02c29dd14d Files are installed with mode 444 by default. 2005-12-09 15:19:31 +00:00
Joseph Koshy
8334958a7f Add a -f configfile option to devd(8), based on a patch submitted by
Wojciech A. Koszek.

Submitted by:	Wojciech A. Koszek <dunstan@freebsd.czest.pl>
2005-11-24 14:39:41 +00:00
Maksim Yevmenkin
e08872c40b Revise hcsecd(8) and sdpd(8) rc.d scripts one more time
- Use _prestart rc.d method to automatically kldload ng_btsocket(4) if needed;

- Rename "sdpd_user" to "sdpd_username" and "sdpd_group" to "sdpd_groupname"
  to avoid collision with "magic" variables;

Inspired by:	yar
MFC after:	3 days
2005-11-22 18:51:43 +00:00
Brooks Davis
cda39c0193 Add a new configuration variable, ipv4_addrs_<ifn>, which adds one or
more IPv4 address from a ranged list in CIRD notation:

ipv4_addrs_ed0="192.168.0.1/24 192.168.1.1-5/28"

In the process move alias processing into new ipv4_up/down functions to
more toward a less IPv4 centric world.

Submitted by:	Philipp Wuensche <cryx dash freebsd at h3q dot com>
2005-11-14 23:34:50 +00:00
Maksim Yevmenkin
cdf98ad3e7 Start integrating Bluetooth into rc.d system.
Introduce /etc/rc.d/bluetooth script to start/stop Bluetooth devices. It
will be called from devd(8) in response to device arrival/departure events.
It is also possible to call it by hand to start/stop particular device
without unplugging it.

Introduce generic way to set configuration parameters for Bluetooth devices.
By default /etc/rc.d/bluetooth script has hardwired defaults compatible
with old rc.bluetooth from /usr/share/netgraph/bluetooth/examples. These
can be overridden using /etc/defaults/bluetooth.device.conf file (system
wide defaults). Finally, there could be another device specific override
file located in /etc/bluetooth/$device.conf (where $device is ubt0, btccc0
etc.)

The list of configuration parameters and their meaning described in the
/etc/defaults/bluetooth.device.conf file. Even though Bluetooth device
configuration files are not shell scripts, they must follow basic sh(1) syntax.

The bluetooth.device.conf(5) and handbook update will follow shortly.

Inspired by:	Panagiotis Astithas ( past at ebs dot gr )
Reviewed by:	brooks, yar
MFC after:	1 week
2005-11-10 19:09:22 +00:00
Maksim Yevmenkin
412d0f16d1 Add rc.d scripts for the hcsecd(8) and sdpd(8) daemons. Put defaults into
/etc/defaults/rc.conf. Both daemons can run even if no Bluetooth devices
are attached to the system. Both daemons depend on Bluetooth socket layer
and thus disabled by default. Bluetooth sockets layer must be either loaded
as a module or compiled into kernel before the daemons can run.

MFC after:	1 month
2005-10-11 19:16:48 +00:00
Yaroslav Tykhiy
c8a0dfab83 Add an rc.d script to start pfsync at the right moment of the
system boot, and hook it up in the system.

The separate script is needed because in the presence of various
interface lists in rc.conf ($network_interfaces, $cloned_interfaces,
$sppp_interfaces, $gif_interfaces, more to come) it is hard to start
them orderly, so that pfsync is brought up after its syncdev, which
is required for the proper startup of pfsync.

Discussed with:	mlaier on -pf
MFC after:	5 days
2005-10-02 18:59:02 +00:00
Robert Watson
1a51e01115 Add a new rc.conf entry, kerberos5_server_flags, which allows the
administrator to specify additional start-up flags to the Kerberos
5 Authentication Server.

MFC after:	3 days
2005-09-20 11:13:28 +00:00
Yaroslav Tykhiy
4986c6d8e2 Stop hard-coding an -M flag to mdmfs(8) in /etc/rc.subr.
Now this flag can be set, or not set, for memory-backed
file systems on individual basis, as illustrated by the
rc.conf(5) variables tmpmfs_flags and varmfs_flags.  The
flag is set for those FS'en by default, in /etc/defaults/rc.conf,
in order to stay compatible with the old rc.subr behaviour.

Submitted by:	marck
MFC after:	3 days
2005-08-24 16:25:47 +00:00
Brooks Davis
41f7ee42ae - Remove the removable_interfaces variable. /etc/pccard_ether will
now run on any interface.
- Add a new ifconfig_<ifn> keyword, NOAUTO which prevents configuration
  of an interface at boot or via /etc/pccard_ether.  This allows
  /etc/rc.d/netif to be used to start and stop an interface on a purely
  manual basis.  The decision to affect pccard_ether may be revisited at
  a later date.

Requested by:	imp, gallatin (removable_interfaces)
Discussed with:	sam, Randy Bush (NOAUTO)
2005-08-24 01:23:49 +00:00
Pawel Jakub Dawidek
b12cfed25c Add scripts for GELI device configuration on boot.
rc.d/geli - configures encryption (ask for passphrases, etc.);
rc.d/geli2 - is called after file systems are mounted and mark devices for
             detach on last close.

Sponsored by:	Wheel Sp. z o.o.
		http://www.wheel.pl
MFC after:	3 days
2005-08-14 18:02:22 +00:00
Pawel Jakub Dawidek
49ad116fcc Teach rc.d/encswap script how to use geli(8) for swap encryption.
MFC after:	3 days
2005-08-05 23:38:51 +00:00
Pawel Jakub Dawidek
39f1497151 Remove gbde_swap_enable option which doesn't work and doesn't really have to
work, as one still needs to put <device>.bde into /etc/fstab.
2005-08-04 08:19:13 +00:00
David E. O'Brien
e8e92a219f Minor comment re-alignment. 2005-07-22 00:38:55 +00:00
Pav Lucistnik
0da71daba6 - Mention special behaviour of init(8) when kern_securelevel="0"
Suggested by:	Miroslav Lachman <000.fbsd@quip.cz>
Approved by:	cperciva (src hat)
2005-07-21 15:17:54 +00:00
Pawel Jakub Dawidek
7db9a6fcd1 Introduce new per-jail variable jail_<name>_flags, which allows to specify
jail(8) flags (before the change we had hardcoded "-l -U root").

Submitted by:	Frank Behrens <frank@pinky.sax.de>
PR:		conf/80244
Approved by:	re (scottl)
MFC after:	1 week
2005-06-26 16:30:20 +00:00
Brooks Davis
1e03bb0312 Remove default and documenation for pccard_ether_delay since I removed
it from /etc/pccard_ether.

Submitted by:	Jeremie Le Hen <jeremie at le-hen dot org>
2005-06-08 00:05:58 +00:00
Dag-Erling Smørgrav
cad530b9d3 Change the default for dumpdev to "AUTO". It should be reverted to "NO"
on RELENG_* branches.
2005-06-07 15:22:08 +00:00
Brooks Davis
8e9e71f817 Support code for the OpenBSD dhclient. This significantly changes the
way interfaces are configured.  Some key points:

  - At startup, all interfaces are configured through /etc/rc.d/netif.
  - ifconfig_<if> variables my now mix real ifconfig commands the with
    DHCP and WPA directives.  For example, this allows media
    configuration prior to running dhclient.
  - /etc/rc.d/dhclient is not run at startup except by netif to start
    dhclient on specific interfaces.
  - /etc/pccard_ether calls "/etc/rc.d/netif start <if>" to do most of
    it's work.
  - /etc/pccard_ether no longer takes additional arguments to pass to
    ifconfig.  Instead, ifconfig_<if> variables are now honored in favor
    of pccard_ifconfig when available.
  - /etc/pccard_ether will only run on interfaces specified in
    removable_interfaces, even if pccard_ifconfig is set.
2005-06-07 04:49:12 +00:00
Gleb Smirnoff
8d6e44f80f Add startup script and default configuration file for bsnmpd.
Reviewed by:	harti
2005-04-17 10:47:58 +00:00
Thomas Quinot
a5562a139a Document that dumpdev may be set to AUTO to dump to the first appropriate
swap device listed in /etc/fstab.
2005-04-12 15:21:51 +00:00
Doug Barton
f297a20e30 The alternative suggested for /entropy as a shutdown
save file was /var/db/entropy, which also happens to
be the directory where the individual entropy files
created by /usr/libexec/save-entropy are stored.
Change the suggestion to be /var/db/entropy-file
instead.

In an error condition where the shutdown file is not
created, the error message accessed a variable that
doesn't exist.

PR:		conf/75722
Submitted by:	Nicolas Rachinsky <list@rachinsky.de>
2005-04-11 02:45:05 +00:00
Nate Lawson
0a133d67f3 Set CPU speed to 100% in acpi_throttle attach. This is needed for some
systems that boot with this value at the lowest setting.  Change the
default boot config back to "leave frequency as BIOS set it".  Also, fix
buglet where acpi_throttle wouldn't be used if p4tcc was present but
disabled by the user.

MFC after:	1 week
2005-04-10 20:04:30 +00:00
Nate Lawson
c2137e57f5 Instead of leaving the current frequency setting at whatever the BIOS set
on boot, force it to HIGH.  This is needed for some systems which appear
to boot with a low acpi_throttle setting by default.  Thanks to Christian
Brueffer for tracking this down on his system.

MFC after:	1 day
2005-04-03 21:45:20 +00:00
Tom Rhodes
a7efb70ebd Remove mac_lomac(4) functionality. The proper way is to use loader.conf
or build the policy into a kernel.

Approved by:	rwatson
2005-03-12 21:09:15 +00:00
Brooks Davis
c1c1542199 Allow chkprintcap(8) to be run before lpd is started. Disabled by
default for now.  Default flags create missing directories.

Remove comment about doing this in etc/rc.d/var.

Unlike in the PR, I chose to do this in the lpd script where we reliably
have /usr available.

PR:		conf/71488
Submitted by:	RZ-FreeBSD0904 at fh-karlsruhe dot de
2005-03-02 02:46:47 +00:00
Brooks Davis
bb4bd97c12 - Update etc/rc.d/newsyslog to FreeBSD standards and install it.
- Enable it by default, running newsyslog with -CN which creates files
   that have the C flag specified in /etc/newsyslog.conf.
 - Remove the "newsyslog -CC" call from etc/rc.d/var and the check for
   newsyslog.
 - Add the C flag to entries in /etc/newsyslog.conf that are currently
   installed as part of the base system.

There are two effects from this change:
 - Users who delete default syslog files to stop logging to them
   will need to set newsyslog_enable=NO in rc.conf or remove the C
   flag from those file in /etc/newsyslog.conf or they will come back
   on the next boot.
 - Diskless systems now create the same set of files that ordinary
   systems have by default instead of every file in newsyslog.conf.
2005-03-02 00:40:55 +00:00
Nate Lawson
570453011e Due to a couple complaints about C3 failing on an old Compaq Armada and
a mobile Celeron, disable it by default for the release.  We'll have to
nail the last few cases later.
2005-02-27 04:05:50 +00:00