The reference driver has a 3ms delay for the AR9130 but I'm not as yet
sure why. From what I can gather, it's likely waiting for some FIFO
flush to occur.
At some point in the future it may be worthwhile adding a WMAC
FIFO flush here, but that'd require some side-call through to the SoC
DDR flush routines.
Obtained from: Atheros
guarantees on acquire for the tlbie mutex. Conversely, the TLB invalidation
sequence provides guarantees that do not need to be redundantly applied on
release. Roll a small custom lock that is just right. Simultaneously,
convert the SLB tree changes back to lwsync, as changing them to sync
was a misdiagnosis of the tlbie barrier problem this commit actually fixes.
do not include file attributes in the reply to an NFS create RPC
under certain circumstances.
This resulted in a vnode of type VNON that was not usable.
This patch adds an NFS getattr RPC to nfs_create() for this case,
to fix the problem. It was tested by the person that reported
the problem and confirmed to fix this case for their server.
Tested by: Steven Haber (steven.haber at isilon.com)
MFC after: 2 weeks
ZFS volume is exported via the new NFS server. The leak occurred
because the new NFS server code didn't handle the case where
a file system sets the SAVENAME flag in its VOP_LOOKUP() and
ZFS does this for the DELETE case.
Tested by: Oliver Brandmueller (ob at gruft.de), hrs
PR: kern/167266
MFC after: 1 month
discrepancy between modules and kernel, but deal with SMP differences
within the functions themselves.
As an added bonus this also helps in terms of code readability.
Requested by: gibbs
Reviewed by: jhb, marius
MFC after: 1 week
to follow the example of OpenSolaris and its descendants, which implemented
cpu as an inline that took a value out of curthread. At certain points in
the FreeBSD scheduler curthread->td_oncpu will no longer be valid (in
particukar, just before the thread gets descheduled) so instead I have
implemented this as its own built-in variable.
Sponsored by: Sandvine Inc.
MFC after: 1 week
and voltage sensor, TWSI is used to get sensor data. msk(4) does
not monitor these sensors and interrupt for TWSI completion is
disabled by default.
However, due to unknown reason, the TWSI completion interrupt fires
and it resulted in interrupt storm. To fix it, acknowledges the
TWSI completion interrupt if driver see the event. Given that not
all Yukon II controllers show the issue it could be a silicon bug
which does not honor interrupt masking.
Probably the right way to address the issue is disabling automatic
TWSI cycle initiation against these sensors. It would be even
better to implement reading voltage/temperature from the NIC but it
requires access to National LM80 through TWSI and documentation to
do that is not available yet(probably will never happen).
Reported by: jhb
Tested by: jhb
MFC after: 2 weeks
which will be needed for AR7010 and AR9287 USB access.
The names differ slightly from Linux and Atheros, for the sake of
consistency.
A lot more work is required in order to convert the 11n HAL support to
fully support USB.
header will make the data go over the 64k limits announced to busdma as
maxsize and the transaction will fail.
With TSO this can result in a TCP regression due to the lost packet.
According to the data sheets ixgbe(4) 82598 and 82599 can handle up to
256k so increase the maximum.
Reported by: Jon Kåre Hellan, UNINETT (jon.kare.hellan uninett.no)
Tested by: Jon Kåre Hellan, UNINETT (jon.kare.hellan uninett.no)
MFC after: 1 week
to the process id. It follows the ptrace(2) interface and allows debugging
libraries to use thread ids directly, without slow and verbose conversion
of thread id into pid.
The PGET_NOTID flag is provided to allow a specific sysctl to disallow
this behaviour. All current callers of pget(9) have useful semantic to
operate on tid and do not need this flag.
Reviewed by: jhb, trocini
MFC after: 1 week
not provide general barriers, but only barriers in the context of the
atomic sequences here. As such, make them private and keep the global
*mb() routines using a variant of sync.
isync to implement read and write barriers, following Appendix B.2 of
Book II of the architecture manual. This provides a 25% speed increase
to fork() on the PowerPC G4.
of sync (lwsync is an alternate encoding of sync on systems that do not
support it, providing graceful fallback). This provides more than an order
of magnitude reduction in the time required to acquire or release a mutex.
MFC after: 2 months
sync performs a strict superset of the functions of eieio, so using both
is redundant. While here, expand bus barriers to all bus_space operations,
since many drivers do not correctly use bus_space_barrier().
In principle, we can also replace sync just with eieio, for a significant
performance increase, but it remains to be seen whether any poorly-written
drivers currently depend on the side effects of sync to properly function.
MFC after: 1 week
the page. This PMAP requires an additional lock besides the PMAP lock
in pmap_extract_and_hold(), which vm_page_pa_tryrelock() did not release.
Suggested by: kib
MFC after: 4 days
via sysctl(4) interface. This permits router not to stop forwarding
packets while route table is being written to user-supplied buffer.
Reported by: Pawel Tyll <ptyll@nitronet.pl>
Approved by: kib(mentor)
MFC after: 1 week
as otherwise the interrupt handling code may modify data in the non-DMA
part of the cache line while we have it stashed away in the temporary
stack buffer, then we end up restoring a stale value.
PR: 160431
Submitted by: Ian Lepore
MFC after: 1 week
