A misordering in the Via padlock driver really strongly suggested that these
should use C99 named initializers.
No functional change.
Sponsored by: Dell EMC Isilon
Theoretically, HMACs do not actually have any limit on key sizes.
Transforms should compact input keys larger than the HMAC block size by
using the transform (hash) on the input key.
(Short input keys are padded out with zeros to the HMAC block size.)
Still, not all FreeBSD crypto drivers that provide HMAC functionality
handle longer-than-blocksize keys appropriately, so enforce a "maximum" key
length in the crypto API for auth_hashes that previously expressed a
requirement. (The "maximum" is the size of a single HMAC block for the
given transform.) Unconstrained auth_hashes are left as-is.
I believe the previous hardcoded sizes were committed in the original
import of opencrypto from OpenBSD and are due to specific protocol
details of IPSec. Note that none of the previous sizes actually matched
the appropriate HMAC block size.
The previous hardcoded sizes made the SHA tests in cryptotest.py
useless for testing FreeBSD crypto drivers; none of the NIST-KAT example
inputs had keys sized to the previous expectations.
The following drivers were audited to check that they handled keys up to
the block size of the HMAC safely:
Software HMAC:
* padlock(4)
* cesa
* glxsb
* safe(4)
* ubsec(4)
Hardware accelerated HMAC:
* ccr(4)
* hifn(4)
* sec(4) (Only supports up to 64 byte keys despite claiming to
support SHA2 HMACs, but validates input key sizes)
* cryptocteon (MIPS)
* nlmsec (MIPS)
* rmisec (MIPS) (Amusingly, does not appear to use key material at
all -- presumed broken)
Reviewed by: jhb (previous version), rlibby (previous version)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12437
When crypto_newsession() is given a request for an unsupported capability,
raise a more specific error than EINVAL.
This allows cryptotest.py to skip some HMAC tests that a driver does not
support.
Reviewed by: jhb, rlibby
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12451
In particular, support chaining an AES cipher with an HMAC for a request
including AAD. This permits submitting requests from userland to encrypt
objects like IPSec packets using these algorithms.
In the non-GCM case, the authentication crypto descriptor covers both the
AAD and the ciphertext. The GCM case remains unchanged. This matches
the requests created internally in IPSec. For the non-GCM case, the
COP_F_CIPHER_FIRST is also supported since the ordering matters.
Note that while this can be used to simulate IPSec requests from userland,
this ioctl cannot currently be used to perform TLS requests using AES-CBC
and MAC-before-encrypt.
Reviewed by: cem
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D11759
This requests that the cipher be performed before rather than after
the HMAC when both are specified for a single operation.
Reviewed by: cem
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D11757
Software crypto implementations don't care how the buffer is laid out,
but hardware implementations may assume that the AAD is always before
the plain/cipher text and that the hash/tag is immediately after the end
of the plain/cipher text.
In particular, this arrangement matches the layout of both IPSec packets
and TLS frames. Linux's crypto framework also assumes this layout for
AEAD requests.
Reviewed by: cem
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D11758
- Mark the source buffer for a copyback operation as const in the kernel
API.
- Use const with input-only buffers in crypto ioctl structures used with
/dev/crypto.
MFC after: 1 month
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D10517
The header was added by the recent keybuf feature (r316343)
MODINFOMD_KEYBUF originally resided here, but was moved to linker.h
This change fixes the build on risc-5 which doesn't have a metadata.h
Detected by Jenkins: https://ci.freebsd.org/job/FreeBSD-head-riscv64-build/1167/console
Reported by: lwhsu
This patch adds a general mechanism for providing encryption keys to the
kernel from the boot loader. This is intended to enable GELI support at
boot time, providing a better mechanism for passing keys to the kernel
than environment variables. It is designed to be extensible to other
applications, and can easily handle multiple encrypted volumes with
different keys.
This mechanism is currently used by the pending GELI EFI work.
Additionally, this mechanism can potentially be used to interface with
GRUB, opening up options for coreboot+GRUB configurations with completely
encrypted disks.
Another benefit over the existing system is that it does not require
re-deriving the user key from the password at each boot stage.
Most of this patch was written by Eric McCorkle. It was extended by
Allan Jude with a number of minor enhancements and extending the keybuf
feature into boot2.
GELI user keys are now derived once, in boot2, then passed to the loader,
which reuses the key, then passes it to the kernel, where the GELI module
destroys the keybuf after decrypting the volumes.
Submitted by: Eric McCorkle <eric@metricspace.net> (Original Version)
Reviewed by: oshogbo (earlier version), cem (earlier version)
MFC after: 3 weeks
Relnotes: yes
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D9575
VFP code to store the old context, with lazy loading of the new context
when needed.
FPU_KERN_NOCTX is missing as this is unused in the crypto code this has
been tested with, and I am unsure on the requirements of the UEFI
Runtime Services.
Reviewed by: kib
Obtained from: ABT Systeems Ltd
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8276
This error looks like it was a simple copy-paste typo in the original commit
for this code (r275732).
PR: 204009
Reported by: Chang-Hsien Tsai <luke.tw AT gmail.com>
Sponsored by: EMC / Isilon Storage Division
Keep xform.c as a meta-file including the broken out bits
existing code that includes xform.c continues to work as normal
Individual algorithms can now be reused elsewhere, including outside
of the kernel
Reviewed by: bapt (previous version), gnn, delphij
Approved by: secteam
MFC after: 1 week
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D4674
cperciva's libmd implementation is 5-30% faster
The same was done for SHA256 previously in r263218
cperciva's implementation was lacking SHA-384 which I implemented, validated against OpenSSL and the NIST documentation
Extend sbin/md5 to create sha384(1)
Chase dependancies on sys/crypto/sha2/sha2.{c,h} and replace them with sha512{c.c,.h}
Reviewed by: cperciva, des, delphij
Approved by: secteam, bapt (mentor)
MFC after: 2 weeks
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D3929
Set zero ivsize for enc_xform_null and remove special handling from
xform_esp.c.
Reviewed by: gnn
Differential Revision: https://reviews.freebsd.org/D1503
defines the keys differently than NIST does, so we have to muck with
key lengths and nonce/IVs to be standard compliant...
Remove the iv from secasvar as it was unused...
Add a counter protected by a mutex to ensure that the counter for GCM
and ICM will never be repeated.. This is a requirement for security..
I would use atomics, but we don't have a 64bit one on all platforms..
Fix a bug where IPsec was depending upon the OCF to ensure that the
blocksize was always at least 4 bytes to maintain alignment... Move
this logic into IPsec so changes to OCF won't break IPsec...
In one place, espx was always non-NULL, so don't test that it's
non-NULL before doing work..
minor style cleanups...
drop setting key and klen as they were not used...
Enforce that OCF won't pass invalid key lengths to AES that would
panic the machine...
This was has been tested by others too... I tested this against
NetBSD 6.1.5 using mini-test suite in
https://github.com/jmgurney/ipseccfgs and the only things that don't
pass are keyed md5 and sha1, and 3des-deriv (setkey syntax error),
all other modes listed in setkey's man page... The nice thing is
that NetBSD uses setkey, so same config files were used on both...
Reviewed by: gnn
Though confusing, GCM using ICM_BLOCK_LEN, but ICM does not is
correct... GCM is built on ICM, but uses a function other than
swcr_encdec... swcr_encdec cannot handle partial blocks which is
why it must still use AES_BLOCK_LEN and is why XTS was broken by the
commit...
Thanks to the tests for helping sure I didn't break GCM w/ an earlier
patch...
I did run the tests w/o this patch, and need to figure out why they
did not fail, clearly more tests are needed...
Prodded by: peter
mode and with hardware support on systems that have AESNI instructions.
Differential Revision: D2936
Reviewed by: jmg, eri, cognet
Sponsored by: Rubicon Communications (Netgate)
It is not network-specific code and would
be better as part of libkern instead.
Move zlib.h and zutil.h from net/ to sys/
Update includes to use sys/zlib.h and sys/zutil.h instead of net/
Submitted by: Steve Kiernan stevek@juniper.net
Obtained from: Juniper Networks, Inc.
GitHub Pull Request: https://github.com/freebsd/freebsd/pull/28
Relnotes: yes
for counter mode), and AES-GCM. Both of these modes have been added to
the aesni module.
Included is a set of tests to validate that the software and aesni
module calculate the correct values. These use the NIST KAT test
vectors. To run the test, you will need to install a soon to be
committed port, nist-kat that will install the vectors. Using a port
is necessary as the test vectors are around 25MB.
All the man pages were updated. I have added a new man page, crypto.7,
which includes a description of how to use each mode. All the new modes
and some other AES modes are present. It would be good for someone
else to go through and document the other modes.
A new ioctl was added to support AEAD modes which AES-GCM is one of them.
Without this ioctl, it is not possible to test AEAD modes from userland.
Add a timing safe bcmp for use to compare MACs. Previously we were using
bcmp which could leak timing info and result in the ability to forge
messages.
Add a minor optimization to the aesni module so that single segment
mbufs don't get copied and instead are updated in place. The aesni
module needs to be updated to support blocked IO so segmented mbufs
don't have to be copied.
We require that the IV be specified for all calls for both GCM and ICM.
This is to ensure proper use of these functions.
Obtained from: p4: //depot/projects/opencrypto
Relnotes: yes
Sponsored by: FreeBSD Foundation
Sponsored by: NetGate
struct kinfo_file.
- Move the various fill_*_info() methods out of kern_descrip.c and into the
various file type implementations.
- Rework the support for kinfo_ofile to generate a suitable kinfo_file object
for each file and then convert that to a kinfo_ofile structure rather than
keeping a second, different set of code that directly manipulates
type-specific file information.
- Remove the shm_path() and ksem_info() layering violations.
Differential Revision: https://reviews.freebsd.org/D775
Reviewed by: kib, glebius (earlier version)
- Add invfo_rdwr() (for read and write), invfo_ioctl(), invfo_poll(),
and invfo_kqfilter() for use by file types that do not support the
respective operations. Home-grown versions of invfo_poll() were
universally broken (they returned an errno value, invfo_poll()
uses poll_no_poll() to return an appropriate event mask). Home-grown
ioctl routines also tended to return an incorrect errno (invfo_ioctl
returns ENOTTY).
- Use the invfo_*() functions instead of local versions for
unsupported file operations.
- Reorder fileops members to match the order in the structure definition
to make it easier to spot missing members.
- Add several missing methods to linuxfileops used by the OFED shim
layer: fo_write(), fo_truncate(), fo_kqfilter(), and fo_stat(). Most
of these used invfo_*(), but a dummy fo_stat() implementation was
added.
This will allow us to more easily test the software versions of these
routines...
Considering that we've never had an software asymetric implmentation,
it's doubtful anyone has this enabled...
swcr_newsession can change the pointer for swcr_sessions which races with
swcr_process which is looking up entries in this array.
Add a rwlock that protects changes to the array pointer so that
swcr_newsession and swcr_process no longer race.
Original patch by: Steve O'Hara-Smith <Steve.OHaraSmith@isilon.com>
Reviewed by: jmg
Sponsored by: EMC / Isilon Storage Division
In its stead use the Solaris / illumos approach of emulating '-' (dash)
in probe names with '__' (two consecutive underscores).
Reviewed by: markj
MFC after: 3 weeks
option, unbreak the lock tracing release semantic by embedding
calls to LOCKSTAT_PROFILE_RELEASE_LOCK() direclty in the inlined
version of the releasing functions for mutex, rwlock and sxlock.
Failing to do so skips the lockstat_probe_func invokation for
unlocking.
- As part of the LOCKSTAT support is inlined in mutex operation, for
kernel compiled without lock debugging options, potentially every
consumer must be compiled including opt_kdtrace.h.
Fix this by moving KDTRACE_HOOKS into opt_global.h and remove the
dependency by opt_kdtrace.h for all files, as now only KDTRACE_FRAMES
is linked there and it is only used as a compile-time stub [0].
[0] immediately shows some new bug as DTRACE-derived support for debug
in sfxge is broken and it was never really tested. As it was not
including correctly opt_kdtrace.h before it was never enabled so it
was kept broken for a while. Fix this by using a protection stub,
leaving sfxge driver authors the responsibility for fixing it
appropriately [1].
Sponsored by: EMC / Isilon storage division
Discussed with: rstone
[0] Reported by: rstone
[1] Discussed with: philip
to implement fchown(2) and fchmod(2) support for several file types
that previously lacked it. Add MAC entries for chown/chmod done on
posix shared memory and (old) in-kernel posix semaphores.
Based on the submission by: glebius
Reviewed by: rwatson
Approved by: re (bz)
probe method return BUS_PROBE_NOWILDCARD so it doesn't get attached to real
devices hanging off of nexus(4) with no specific devclass set. Actually, the
more desirable fix for this would be to get rid of the newbus interface of
cryptosoft(4) altogether but apparently crypto(9) was written with support
for cryptographic hardware in mind so that approach would require some KPI
breaking changes which don't seem worth it.
MFC after: 1 week
use '-' in probe names, matching the probe names in Solaris.[1]
Add userland SDT probes definitions to sys/sdt.h.
Sponsored by: The FreeBSD Foundation
Discussed with: rwaston [1]
context from in-kernel execution of padlock instructions and to handle
spurious FPUDNA exceptions that sometime are raised when doing padlock
calculations.
Globally mark crypto(9) kthread as using FPU.
Reviewed by: pjd
Hardware provided by: Sentex Communications
Tested by: pho
PR: amd64/135014
MFC after: 1 month
