I'm seeing 5GHz association work but data not work until the rate drops,
so I need way more information about what's being programmed into the
transmit descriptors.
Tested:
* 7260AC, STA mode
This enables LDPC receive support for the AR9300 chips that support it.
It'll announce LDPC support via net80211.
Tested:
* AR9380, STA mode
* AR9331, (to verify the HAL didn't attach it to a chip which
doesn't support LDPC.)
TODO:
* Add in net80211 machinery to make this configurable at runtime.
Add support for the FHT_STBC_TX flag in iv_flags_ht, so it'll now obey
the per-vap ifconfig stbctx flag.
This means that we can do STBC TX on one vap and not another VAP.
(As well as STBC RX on said vap; that changes the HTCAP announcement.)
This adds the ability to view and configure the STBC parameter for
both transmit and receive.
Whilst here, fix a typo for AMSDU.
TODO:
* manpage update
This is in preparation for exposing configuring STBC flags up to ifconfig
so STBC TX/RX can be configured at runtime.
* Set the FHT_STBC flags for TX/RX if the HT capabilitiex exist
* Clear the RX STBC HT capability flag when creating a HTCAP IE, so
we only announce it if it's configured in the FHT flags.
Tested:
* AR9331 (carambola2), AP/STA modes
Always print out the firmware panic info before restarting; don't
put it behind IWM_DEBUG.
Submitted by: bapt
Differential Revision: https://reviews.freebsd.org/D6081
This allows for the long function components encountered in www/firefox.
This constant is part of DTrace's userland ABI, so this change may not be
MFC'ed.
PR: 207735
Without this change, DTrace will refuse to load a DOF section if the
function component of any of its probes exceeds DTRACE_FUNCNAMELEN (128).
Probes in C++ programs can have very long function components. Rather than
rejecting all probes if a single probe exceeds the limit, simply skip the
invalid probe and emit a warning. This ensures that valid probes are
instantiated.
PR: 207735
MFC after: 2 weeks
When this flag is turned on, DOF and DIF validation errors are printed to
the kernel message buffer. This is useful for debugging.
Also remove the debug.dtrace.debug sysctl, which has no effect.
sysvmsg, sysvsem, and sysvshm, with the following bahavior:
inherit: allow full access to the IPC primitives. This is the same as
the current setup with allow.sysvipc is on. Jails and the base system
can see (and moduly) each other's objects, which is generally considered
a bad thing (though may be useful in some circumstances).
disable: all no access, same as the current setup with allow.sysvipc off.
new: A jail may see use the IPC objects that it has created. It also
gets its own IPC key namespace, so different jails may have their own
objects using the same key value. The parent jail (or base system) can
see the jail's IPC objects, but not its keys.
PR: 48471
Submitted by: based on work by kikuchan98@gmail.com
MFC after: 5 days
ChipCommon probing uses mapping table "chipc_devices". It calls bhnd_device_lookup,
which iterate over mapping table with end condition:
entry->desc != NULL
So if mapping table contains row with description equals to NULL, it will
stop processing of mapping. I.e. description is mandatory field and should
be not NULL.
This patch corrects mapping table for ChipCommon.
Submitted by: Michael Zhilin <mizhka@gmail.com>
Differential Revision: https://reviews.freebsd.org/D6088
The iwm firmware has separate commands for add, modify and delete for
various things (mac, phy context, etc.) The openbsd driver has a habit
of just completely resetting the NIC each time, which is technically
mostly okay (as long as the reset doesn't actually fail!) but it means
a lot of the code is doing ADD when it should do MODIFY.
The firmware responds in kind - it just asserts.
This fixes auth attempts that occur after the NIC has been already
configured.
(I'm sure there are more instances of this!)
Tested:
iwm0: <Intel Dual Band Wireless AC 7260> mem 0xf1400000-0xf1401fff irq 17 at device 0.0 on pci2
iwm0: revision: 0x140, firmware 25.228 (API ver. 9)
.. STA mode.
Submitted by: Masachika ISHIZUKA <ish@amail.plala.or.jp>
memory system.
RISC-V ISA has only single page table base register for both kernel
and user addresses translation. Before this commit we were using an
extra (4th) level of pagetables for switching between kernel and user
pagetables, but then realized FPGA hardware has 3-level page system
hardcoded. It is also become clear that the bitfile synthesized for
4-level system is untested/broken, so we can't use extra level for
switching.
We are now share level 1 of pagetables between kernel and user VA.
This requires to keep track of all the user pmaps created and once we
adding L1 page to kernel pmap we have to add it to all the user pmaps.
o Change the VM layout as we must have topmost bit to be 1 in the
selected page system for kernel addresses and 0 for user addresses.
o Implement pmap_kenter_device().
o Create the l3 tables for the early devmap.
Sponsored by: DARPA, AFRL
Sponsored by: HEIF5
Sounds strange, but both RocketCore and lowRISC do not operate
if we set it.
All the known implementations (Spike, QEMU, RocketCore, lowRISC) uses
default machine trap vector address and operates fine with this.
Original Berkeley Boot Loader (bbl) does not set this as well.
Sponsored by: DARPA, AFRL
Sponsored by: HEIF5
There is no need to clear all the DDR memory (we only need to clear
BSS section).
I was playing with non-default version of hardware (the bitfile
synthesized for 4-level page memory system) and clearing was helpful,
but then realized support for 4-level page system is untested/broken
in both RocketCore and lowRISC.
until after the jail is found or created. This requires unlocking the
jail for the call and re-locking it afterward, but that works because
nothing in the jail has been changed yet, and other processes won't
change the important fields as long as allprison_lock remains held.
Keep better track of name vs namelc in kern_jail_set. Name should
always be the hierarchical name (relative to the caller), and namelc
the last component.
PR: 48471
MFC after: 5 days
removed from the user perspective, i.e. when the last pr_uref goes away,
even though the jail mail still exist in the dying state. It will also
be called if either PR_METHOD_CREATE or PR_METHOD_SET fail.
PR: 48471
MFC after: 5 days
a jail that might be seen mid-removal. It hasn't been doing the right
thing since at least the ability to resurrect dying jails, and such
resurrection also makes it unnecessary.
When ORing in a register_t to a wider integer (vm_paddr_t), it gets sign
extended, so high addresses overwrite the upper word with all 0xf. Cast to the
unsigned form (u_register_t), to avoid this problem, and get correct addresses
printed.
