refusing to use stdio.
Reduce nesting level in the sleep loop by returning earlier for negative
timeouts.
Limit the maximum timeout to INT_MAX seconds.
Submitted by: bde
MFC after: 3 weeks
This simply sets a flag in libedit. It has a shortcoming in that it does not
apply to multi-line commands.
Note that a configuration option for this is not going to happen, but always
having this seems better than not having it. NetBSD has done the same.
PR: bin/54683
Obtained from: NetBSD
MFC after: 1 month
So a command like
kill _HUP 1
now fails without sending SIGTERM to init.
The behaviour when kill(2) fails remains unchanged: processing continues.
This matches other implementations and POSIX and is useful for killing
multiple processes at once when some of them may already be gone.
PR: bin/40282
If an ; or & token was followed by an EOF token, pending here-documents were
left uninitialized. Execution would crash, either in the main shell process
for literal here-documents or in a child process for expanded
here-documents. In the latter case the problem is hard to detect apart from
the core dumps and log messages.
Side effect: slightly different retries on inputs where EOF is not
persistent.
Note that tools/regression/bin/sh/parser/heredoc6.0 still causes a similar
crash in a child process. The text passed to eval is malformed and should be
rejected.
simplecmd() only handles simple commands and function definitions, neither
of which involves the ! keyword. The initial token on entry to simplecmd()
is one of the following: TSEMI, TAND, TOR, TNL, TEOF, TWORD, TRP.
Unless $! has been referenced for a particular job or $! still contains that
job's pid, forget about it after it has terminated. If $! has been
referenced, remember the job until the wait builtin has reported its
completion (either with the pid as parameter or without parameters).
In interactive mode, jobs are forgotten after termination has been reported,
which happens before primary prompts and through the jobs builtin. Even
then, though, remember a job if $! has been referenced.
This is similar to what is suggested by POSIX and should fix most memory
leaks (which also tend to cause sh to use more CPU time) with long running
scripts that start background jobs.
Caveats:
* Repeatedly referencing $! without ever doing 'wait', like
while :; do foo & echo started foo: $!; sleep 60; done
will still use a lot of memory and CPU time in the long run.
* The jobs and jobid builtins do not cause a job to be remembered for longer
like expanding $! does.
PR: bin/55346
The LINENO code uses snprintf() and relied on "myhistedit.h" to pull in the
necessary <stdio.h>.
Compiling with -DNO_HISTORY disables all editing and history support and
allows linking without -ledit -ltermcap. This may be useful for embedded
systems.
MFC after: 2 weeks
This uses the new libedit completion function with quoting support.
Unlike NetBSD, there is no 'set +o tabcomplete' option to disable
completion. I do not see any reason for such a special treatment, as
completion is rather useful and it is possible to do
bind ^I ed-insert
to disable completion and insert a tab character instead.
Submitted by: Guy Yur
- .Nd in section NAME is not optional
- .Ed was missing
- "indent" is not a flag, but a literal argument for -offset
- stop switching font sizes for acronyms
- use .Brq instead of rolling our own
is enabled.
This already worked if without job control.
In either case, this depends on it that a process that terminates due to
SIGINT exits on it (so not with status 1, or worse, 0).
Example:
sleep 5; echo continued
This does not print "continued" any more if sleep is aborted via ctrl+c.
MFC after: 1 month
Previously, it would either try to copy it anyway and fail (without -R),
or create fifo instead of the socket (with -R).
Found with: Coverity Prevent
CID: 5623
MFC after: 2 weeks
usually be set first when using -v.
Adjust an example that sets the day to 30 before setting the month to 3 in
accordance with this approach as the example would always fail in February!
PR: 147354
MFC after: 2 weeks
Example (in interactive mode):
cat <<EOF && )
The next command typed caused sh to segfault, because the state for the here
document was not reset.
Like parser_temp, this uses the fact that the parser is not re-entered.
If a command substitution contains a newline token, this no longer starts
here documents of outer commands. This way, we follow POSIX's idea of the
command substitution being a separate script more closely. It also matches
other shells better and is consistent with newline characters in quotes not
starting here documents.
The extension tested in parser/heredoc3.0 ($(cat <<EOF)\ntext\nEOF\n)
continues to be supported.
In particular, this change allows things like
cat <<EOF && echo `pwd`
(a `` command substitution after a here document)
which formerly silently used an empty file as the here document, because the
EOF of the inner command "pwd" also forced an empty here document.
Although "--" historically has not been required to be recognized for
certain special builtins that do not take options in POSIX, some other
implementations recognize options for them, requiring scripts to use "--" or
avoid operands starting with "-".
Operands starting with "-" can be avoided with eval by prepending a space,
and cannot occur with break, continue, exit, return and shift as they only
take numbers, nor with times as it does not take operands. With . and exec,
avoiding "-" is not so easy as it may require reimplementing the PATH
search; therefore the current proposal for POSIX is to require recognition
of "--" for them.
We continue to accept other strings starting with "-" as operands to . and
exec, and also "--" if it is alone to . (which would otherwise be invalid
anyway).
* Move the "environment variables" that do not need exporting to be
effective or that are set by the shell without exporting to a new section
"Special Variables".
* Add special variables LINENO and PPID.
* Add environment variables LANG, LC_* and PWD; also describe ENV under
environment variables.
This prevents accumulating huge amounts of zombies if a script executes
many background commands but no external commands or subshells.
Note that zombies will not be reaped during long calculations (within
the shell process) or read builtins, but those actions do not create
more zombies.
The terminated background commands will also still be remembered by the
shell.
PR: bin/55346
pax(1) was trying to copy the back-referenced data from
the match pattern, not the matched data.
PR: bin/118132
Obtained from: Debian bug #451361
Reviewed by: jilles
MFC after: 3 weeks
These are git commits 36f0fa8fcbc8c7b2b194addd29100fb40e73e4e9 and
d6d06ff5c2ea0fa44becc5ef4340e5f2f15073e4 in dash.
Because this is the first code I'm importing from dash to expand.c, add the
Herbert Xu copyright notice which is in dash's expand.c.
When pathname expanding *\/, the CTLESC representing the quoted state was
erroneously taken as part of the * pathname component. This CTLESC was then
seen by the pattern matching code as escaping the '\0' terminating the
string.
The code is slightly different because dash converts the CTLESC characters
to backslashes and removes all the other CTL* characters to allow
substituting glob(3).
The effect of the bug was also slightly different from dash (where nothing
matched at all). Because a CTLESC can escape a '\0' in some way, whether
files were included despite the bug depended on memory that should not be
read. In particular, on many machines /*\/ expanded to a strict subset of
what /*/ expanded to.
Example:
echo /*"/null"
This should print /dev/null, not /*/null.
PR: bin/146378
Obtained from: dash
This allows doing things like LC_ALL=C some_builtin to run a builtin under a
different locale, just like is possible with external programs. The
immediate reason is that this allows making printf(1) a builtin without
breaking things like LC_NUMERIC=C printf '%f\n' 1.2
This change also affects special builtins, as even though the assignment is
persistent, the export is only to the builtin (unless the variable was
already exported).
Note: for this to work for builtins that also exist as external programs
such as /bin/test, the setlocale() call must be under #ifndef SHELL. The
shell will do the setlocale() calls which may not agree with the environment
variables.
in at least three ways, so do not say it is ignored:
* who may delete/rename a symlink in a sticky directory
* who may do lchflags(2)/lchown(2)/lchmod(2)
* whose inode quota is charged
MFC after: 1 week
In the 'ln source... directory' synopsis, the basename of each source
determines the name of the created link. Determine this using basename(3)
instead of strrchr(..., '/') which is incorrect if the pathname ends in a
slash.
The patch is somewhat changed to allow for basename(3) implementations that
change the passed pathname, and to fix the -w option's checking also.
The code to compare directory entries only applies to hard links, which
cannot be created to directories using ln.
Example:
ln -s /etc/defaults/ /tmp
This should create a symlink named defaults.
PR: 121568
Submitted by: Ighighi
MFC after: 1 week
Two pathnames refer to the same directory entry iff the directories match
and the final components' names match.
Example: (assuming file1 is an existing file)
ln -f file1 file1
This now fails while leaving file1 intact. It used to delete file1 and then
complain it cannot be linked because it is gone.
With -i, this error is detected before the question is asked.
MFC after: 2 weeks
Unset PWD if it is incorrect and no value for it can be determined.
This preserves the logical current directory across shell invocations.
Example (assuming /home is a symlink):
$ cd
$ pwd
/home/foo
$ sh
$ pwd
/home/foo
Formerly the second pwd would show the physical path (symlinks resolved).
Although groff_mdoc(7) gives another impression, this is the ordering
most widely used and also required by mdocml/mandoc.
Reviewed by: ru
Approved by: philip, ed (mentors)
These do pretty much nothing (except that parentheses are ignored), but
people seem to use them and allowing them does not hurt much.
Single-quotes seem not to be used and cause silently different behaviour
with ksh93 character constants.
This makes sh a bit more friendly in single user mode, make buildenv, chroot
and the like, and matches other shells.
The -o emacs can be overridden on the command line or in the ENV file.
Note that the following sentence
> Enclosing the full parameter expansion string in double-quotes does not
> cause the following four varieties of pattern characters to be quoted,
> whereas quoting characters within the braces has this effect.
is now true, but used to be incorrect.
This applies to word in ${v-word}, ${v+word}, ${v=word}, ${v?word} (which
inherits quoting from the outside) and in ${v%word}, ${v%%word}, ${v#word},
${v##word} (which does not inherit any quoting).
In all cases tilde expansion is only attempted at the start of word, even if
word contains spaces. This agrees with POSIX and other shells.
This is the last part of the patch tested in the exp-run.
Exp-run done by: erwin (with some other sh(1) changes)
Note that this depends on r206145 for allowing pattern match characters to
have their special meaning inside a double-quoted expansion like "${v%pat}".
PR: bin/117748
Exp-run done by: erwin (with some other sh(1) changes)
