serve two purposes: (1) so we can maintain backwards compatibility with
protocols (rwhod, dump, etc...) that either assume time_t is 32 bits or
assume sizeof(time_t) == sizeof(int), or make other similar assumptions.
(2) To tag such routines (by the presence of these calls) for future
cleanup/extension work.
The 32->64 routine, time32_to_time() (when time_t is 64 bits, that is),
is defined specifically to implement temporal locality to properly set the
msb bits of a 64 bit time_t quantity, using the 50 year rule. The locality
code has not been implemented yet (and doesn't need to be for a while),
but that is the intent. This will allow us to maintain backwards protocol
compatibility past 2038.
These routines are intended to be platform and time_t agnostic.
MFC after: 1 week
since that is what we use now and this insulates us from any time_t
tweaks here. We can define a record format that uses 64 bit times if/when
we need to.
using rcmd directly. This has been in my tree for a long time, but we
may need to sync with OpenBSD before MFC.
Obtained from: openbsd
PR: 15830
MFC after: 2 months
manual page), fix capitalization, and remove chflags reference from
SEE ALSO since the only time it's referenced is with an .Xr, anyway.
Submitted by: bde
Updated by peter following KSE and Giant pushdown.
I've running with this patch for two week with no ill side effects.
PR: kern/12014: Fix SysV Semaphore handling
Submitted by: Peter Jeremy <peter.jeremy@alcatel.com.au>
number of characters that are searched. This is especially useful
with file operations and non-NUL terminated strings.
Silence from: -audit, -hackers
MFC after: 5 days
1) Allow the sending of more than one control message at a time
over a unix domain socket. This should cover the PR 29499.
2) This requires that unp_{ex,in}ternalize and unp_scan understand
mbufs with more than one control message at a time.
3) Internalize and externalize used to work on the mbuf in-place.
This made life quite complicated and the code for sizeof(int) <
sizeof(file *) could end up doing the wrong thing. The patch always
create a new mbuf/cluster now. This resulted in the change of the
prototype for the domain externalise function.
4) You can now send SCM_TIMESTAMP messages.
5) Always use CMSG_DATA(cm) to determine the start where the data
in unp_{ex,in}ternalize. It was using ((struct cmsghdr *)cm + 1)
in some places, which gives the wrong alignment on the alpha.
(NetBSD made this fix some time ago).
This results in an ABI change for discriptor passing and creds
passing on the alpha. (Probably on the IA64 and Spare ports too).
6) Fix userland programs to use CMSG_* macros too.
7) Be more careful about freeing mbufs containing (file *)s.
This is made possible by the prototype change of externalise.
PR: 29499
MFC after: 6 weeks
is interrupted by saving the pid.
The old code would assign the return value to pid which would trash
it, to fix the problem save a copy of the pid to be used as the
paramter to wait4().
Submitted by: Toshihiko ARAI <toshi@jp.FreeBSD.org>
The corresponding bugs in <wchar.h> have no effect because the function
prototypes there don't have args so the __restrict "keyword" is
misinterpreted as an arg.
Note our implementation is not thread nor async-cancel safe.
Explicitely note atof() does not check nor report errors.
Note that strtod() should be used instead.
Also add C99 conformity status plus clarification that C99 leaves the
flushing of unwritten data, closure of open streams, and removal of
temporary files to the implementation.
of repeating unsuccessful lseek call on each write (original stdio bug).
2) Save errno accross _sseek call in _swrite to not touch it in case write
success (original stdio bug).
3) Add _sseek error checking back, but only for __SOPT mode now.
This is a first cut, but enough to help people interested in using it
further than before.
More text coming to illustrate use and provide more details.
Based on standards' text.
with non-seekable streams. Now here is what here was originally, but it is
ugly, producing unneded seek syscall on each non-seekable stream write. I'll
think about proper solution later.
manpage by taking its text from NetBSD and editing it further.
This also improves the page's mdoc(7) markup style.
Reviewed by: ru
Obtained from: NetBSD
my last version of this work due to HDD crash, but this version cleanly
passed all POSIX and SuSv2 tests. I am working on testing scripts which
should test this implementation against all locales and surely more fixes
will come soon.
Reviewed by: ache, silence at -audit & -developers
o Removed whitespace at EOL
o Removed hard sentence breaks
o Added cap_size() to the NAME section
o Normalized .Nd descriptions
o Fixed the abuses of .Nm and .Va
o Fixed some DESCRIPTION texts
o Fixed the RETURN VALUES and ERRORS texts to look more traditional
Reviewed by: tmm
'locale not used' statement from comments and BUGS section of manpage.
strtol(): fix non-portable 'cutoff' calculation using the same method as
in strtoll().
Cleanup 'cutoff' calculation, remove unneded casts. Misc. cleanup to
make all functions looks the same.
Implement EINVAL reaction per POSIX, document it in manpage, corresponding
POSIX example quotes here:
------------------------------------------------
If the subject sequence is empty or does not have the expected form, no
conversion is performed; the value of str is stored in the object pointed
to by endptr, provided that endptr is not a null pointer.
If no conversion could be performed, 0 shall be returned and errno may be
set to [EINVAL].
[EINVAL] The value of base is not supported.
Since 0, {LONG_MIN} or {LLONG_MIN}, and {LONG_MAX} or {LLONG_MAX} are
returned on error and are also valid returns on success, an application
wishing to check for error situations should set errno to 0, then call
strtol( ) or strtoll ( ), then check errno.
-----------------------------------------------------
are not used'. This is incorrect, as addr must be passed (caddr_t)1
to do anything useful. The source for gdb and a short test program
will confirm that this man page was in error.
PR: docs/27758
Submitted by: Jiangyi Liu <jyliu@163.net>
sys/capability.h--this compiled fine on i386 where (int) and (ssize_t)
are the same, but broke on Alpha where they differ.
Submitted by: Mike Barcroft <mike@FreeBSD.org>
Obtained from: TrustedBSD Project
plain regular files, i.e. files with __SOPT flag set. Fix it, so ftell(stdout)
always returns the same as lseek(1, 0, 1) now.
NOTE: this bug was in original stdio code
__swrite() and __sseek() to higher level. According to funopen(3) they all
are just wrappers to something like standard read(2), write(2) and
lseek(2), i.e. must not touch stdio internals because they are replaceable
with any other functions knows nothing about stdio internals. See example
of funopen(3) usage in sendmail sources f.e.
NOTE: this is original stdio bug, not result of my range checkin added.
internal functions there may fail and set (i.e. overwrite) errno in normal
(not error) situation). In original variant errno testing after call
(as POSIX suggest) is wrong when errno overwrite happens.
0, return that we can't specify it, i.e. error with ESPIPE.
(hint from: "Peter S. Housel" <housel@acm.org>)
Back out sinit() addition, not needed after various code simplifications.
support functions:
cap_subset_np() - Is cap1 a subset of cap2
cap_equal_np() - Is cap1 equal to cap2
o Introduce implementations of POSIX.1e capability support functions:
cap_copy_ext() - Externalize capability
cap_copy_int() - Internalize capability
cap_size() - Determine size required for cap_copy_ext()
Submitted by: tmm
Obtained from: TrustedBSD Project
When file offset tends to be negative due to internal and ungetc buffers
additions counted, try to discard some ungetc data first, then return EBADF.
Later one can happens if lseek(fileno(fd),...) called f.e. POSIX says that
ungetc beyond beginning of the file results are undefined, so we can just
discard some of ungetc data in that case.
Don't rely on gcc cast when checking for overflow, use OFF_MAX.
Cosmetique.
o Unify <machine/endian.h>'s across all architectures.
o Make bswapXX() functions use a different spelling of u_int16_t and
friends to reduce namespace pollution. The bswapXX() functions
don't actually exist, but we'll probably import these at some
point. Atleast one driver (if_de) depends on bswapXX() for big
endian cases.
o Deprecate byteorder(3) prototypes from <sys/types.h>, these are
now prototyped indirectly in <arpa/inet.h>.
o Deprecate in_addr_t and in_port_t typedefs in <sys/types.h>, these
are now typedef'd in <arpa/inet.h>.
o Change byteorder(3) prototypes to use standards compliant uint32_t
(spelled __uint32_t to reduce namespace pollution).
o Document new preferred headers and standards compliance.
Discussed with: bde
PR: 29946
Reviewed by: bmilekic
documented by POSIX.1e, and understand the opaque capability structures.
Introduce support in the userland POSIX.1e library for a
_CAPABILITY_NEEDMACROS define to remove these macros from the normal
namespace, but allow the libc functions to use them.
Submitted by: tmm
Obtained from: TrustedBSD Project
