The sponge command has been imported on 2017-12-05 but the import has
been reverted the next day.
A script failed and I found that it was due to the left-over broken
sponge binary in base being prefered over the port version. To prevent
a known non-working binary to persist in /usr/bin, I'm adding sponge
to the obsolete files list even though it could only be installed on
a single day in 2017.
I do not plan to MFC this change since the issue will only exist on
systems installed from -CURRENT sources in 2017, and I do assume that
such systems are not running -STABLE today
Until this change, any bindings set in histedit() were lost on calls to
bindcmd().
Only bind -e and bind -v call libedit's keymacro_reset(). Currently you
cannot fool libedit/map.c:map_bind() by trying something like bind -le
as when p[0] == '-', it does a switch statement on p[1].
Before this change long-term load balancer was unable to migrate
running threads, only ones waiting on run queues. But with growing
number of CPU cores it is quite typical now for system to not have
many waiting threads. But same time if due to some coincidence two
long-running CPU-bound threads ended up sharing same physical CPU
core, they could suffer from the SMT penalty indefinitely, and the
load balancer couldn't help.
Improve that by teaching the load balancer to hint running threads
to migrate by marking them with TDF_NEEDRESCHED and new TDF_PICKCPU
flag, making sched_pickcpu() to search for better CPU later, when
it is convenient.
Fix CPU search logic when balancing to limit round-robin migrations
in case of almost equal load to the group of physical cores. The
previous code bounced threads across all the system, that should be
pretty bad for caches and NUMA affinity, while additional fairness
was almost invisible, diminishing with number of cores in the group.
MFC after: 1 month
In cpu_set_upcall(), if the thread startup routine is a thumb routine, make
sure to set PSR_T, so that the CPU will run in thumb mode.
MFC After: 1 week
In cpu_set_upcall(), if the thread startup routine is a thumb routine, make
sure to set PSR_T, so that the CPU will run in thumb mode.
MFC After: 1 week
According to https://github.com/NuxiNL/cloudlibc:
CloudABI is no longer being maintained. It was an awesome experiment,
but it never got enough traction to be sustainable.
There is no reason to keep it in FreeBSD.
Approved by: ed (private mail)
Reviewed by: emaste
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D31923
Determine if a device supports "Extended" or "Separate" metadata, and
what the current metadata setting is (None, Extended, Separate)
Also determine if the device supports:
- Sanitize Crypto Erase
- Sanitize Block Erase
- Sanitize Overwrite
Reviewed by: chuck
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
X-NetApp-PR: #49
Differential Revision: https://reviews.freebsd.org/D31067
After b4cb3fe0e3, loader started crashing on PowerPC64, with a
Program Exception (700) error. The problem was that archsw was
used before being initialized, with the new mount feature. This
change fixes the issue by initializing archsw earlier, before
setting currdev, that triggers the mount.
Reviewed by: tsoome
MFC after: 1 month
X-MFC-With: b4cb3fe0e3
Sponsored by: Instituto de Pesquisas Eldorado (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D32027
In scenarios when first thread in the queue can migrate to specified
CPU, but later ones can't runq_steal_from() incorrectly returned NULL.
MFC after: 2 weeks
During VOP_GETPAGES, fusefs needs to determine the file's length, which
could require a FUSE_GETATTR operation. If that fails, it's better to
SIGBUS than panic.
MFC after: 1 week
Sponsored by: Axcient
Reviewed by: markj, kib
Differential Revision: https://reviews.freebsd.org/D31994
For signal send, copyout from the user FPU save area directly.
For sigreturn, we are in sleepable context and can do temporal
allocation of the transient save area. We cannot copying from userspace
directly to user save area because XSAVE state needs to be validated,
also partial copyins can corrupt it.
Requested by: jhb
Reviewed by: jhb, markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D31954
Instead do one more allocation at the thread creation time. This frees
a lot of space on the stack.
Also do not use alloca() for temporal storage in signal delivery sendsig()
function and signal return syscall sys_sigreturn(). This saves equal
amount of space, again by the cost of one more allocation at the thread
creation time.
A useful experiment now would be to reduce KSTACK_PAGES.
Reviewed by: jhb, markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D31954
when compiling in amd64 kernel environment with -m32. This is a temporal
workaround for some future proper (but unclear) fix.
Reviewed by: jhb, markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D31954
from machdep.c which is too large pile of unrelated things.
Some ptrace functions are moved from machdep.c to ptrace_machdep.c.
Now machdep.c contains code mostly related to the low level initialization
and regular low level operation of the architecture, while signal MD code
and registers handling is placed in exec_machdep.c.
Reviewed by: jhb, markj
Discussed with: jrtc27
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D31954
pfil_run_hooks which eventually can get called asserts on it.
Reviewed by: ae
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D32007
Write to the PWREN register should be done in update_ios based
on the power_mode value in the ios struct.
Also none of the manual (RockChip and Altera) and Linux talks about
the needed for an inverted PWREN value so just remove this.
This fixes eMMC (and possibly SD) when u-boot didn't setup the controller.
Reported by: avg
Tested-on: Rock64, RockPro64
This implementation is faster and doesn't modify the cpuset, so it lets
us avoid some unnecessary copying as well. No functional change
intended.
Reviewed by: cem, kib, jhb
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32029
These allow one to non-destructively iterate over the set or clear bits
in a bitset. The motivation is that we have several code fragments
which iterate over a CPU set like this:
while ((cpu = CPU_FFS(&cpus)) != 0) {
cpu--;
CPU_CLR(cpu, &cpus);
<do something>;
}
This is slow since CPU_FFS begins the search at the beginning of the
bitset each time. On amd64 and arm64, CPU sets have size 256, so there
are four limbs in the bitset and we do a lot of unnecessary scanning.
A second problem is that this is destructive, so code which needs to
preserve the original set has to make a copy. In particular, we have
quite a few functions which take a cpuset_t parameter by value, meaning
that each call has to copy the 32 byte cpuset_t.
The new macros address both problems.
Reviewed by: cem, kib
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32028
Callers are getting the stcb send lock, so just KASSERT that.
No need to signal this when calling stream scheduler functions.
No functional change intended.
MFC after: 1 week
A different exception is raised when we hit a 32bits breakpoint, rather than
a 64bits one, so handle those as well when COMPAT_FREEBSD32 is defined.
This should fix SIGBUS at least when using breakpoints with thumb2 code.
PR: 256468
MFC After: 1 week
When handling a data irq, the sdhci driver calls the
sdhci_platform_will_handle() method, to determine if it should allow the
platform driver to handle the transfer or fall back to programmed I/O.
While dumping, the data irq path may be invoked directly (not from an
interrupt context), which the bcm2835_sdhci DMA code is not prepared to
handle. Return early in this case, to force the fallback to PIO.
Otherwise, the KASSERT that follows will be triggered, and the dump will
fail. On non-INVARIANTS kernels, the system will hang, waiting for a DMA
interrupt that will never arrive.
Reviewed by: kevans
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D31893
Make it possible to have all these macros work without bswap* being
defined. bswap* is part of the application namespace and applications
are free to redefine those functions.
Reviewed by: emaste,jhb,markj
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D31964
Implement and document the new depop command. This command manages drive elements
for drives that support it. Storage elements are typically heads. Element status
can be discovered. Elements may be removed or restored. And the status of any
current depop operation can be assessed.
depop -d elm will remove element elm and truncate available capacity.
depop -l will list the current drive elements and their current status.
depop -r elm will try to restore all retired elements and rebuild capacity.
Changing storage elements may reinitialize the drive. This operation will lose
data and may take hours to complete. Use the drive provided timeout for
operations by default.
Reviewed by: gbe (manpages)
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D29018
Define structures related to the depop set of commands (GET PHYSICAL ELEMENT
STATUS, REMOVE ELEMENT AND TRUNCATE, and RESTORE ELEMENT AND REBUILD) as
well as the CDB construction routines.
Also create scsi_wrap.c. This will have convenience routines that will do all
the elements of allocating the ccb, generating the CDB, sending the command
(looping as necessary for cases where data is returned, but it's size isn't
known up front), etc. As this functionality is fleshed out, calling many
camcontrol commands programatically gets much easier.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D29017
In vt_kms, the postswitch callback restores fbdev mode when
panicking or entering the debugger. This ensures that even when
a graphical applicatino was running on the first tty, simple framebuffer
mode would be restored and the panic would be visible instead
of the frozen GUI. But vt wouldn't call the postswitch callback
when we're already on the first tty, so running a GUI on it
would prevent you from reading any panics.
Reviewed by: tsoome
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D29961
Add generic mmc_helper which uses newly introduced device_*_property
api. Thanks to this change the sd/mmc drivers will be capable
of parsing both DT and ACPI description.
Ensure backward compatibility for all mmc_fdt_helper users.
Reviewed by: manu, mw
Sponsored by: Semihalf
Differential revision: https://reviews.freebsd.org/D31598
