Commit Graph

236 Commits

Author SHA1 Message Date
Andrew Thompson
e31a070263 Add uslcom to the build too.
Reminded by:	Michael Butler
2009-02-15 23:40:29 +00:00
Andrew Thompson
e4edc14efd Switch over GENERIC kernels to USB2 by default.
Tested by:	make universe
2009-02-15 22:33:44 +00:00
Marius Strobl
638ed2cf8e - Use the generally more appropriate PROM base rather than the
kernel one as the non-faulting flush address in the loader so
  we can can change KERNBASE and VM_MIN_KERNEL_ADDRESS if we
  ever want to without needing to worry about using a compatible
  loader.
- Correctly check for LOADER_DEBUG.
- Add a missing const for page_sizes[].

This file was missed in r188455.
2009-02-11 07:50:07 +00:00
Marius Strobl
4c67374c75 Adjust the padding of struct pcpu to r187357. 2009-01-18 13:04:38 +00:00
Nathan Whitehorn
254aa062ad Missed the sun4v update to ofw_machdep.h in the OFW modularization commit. 2008-12-20 15:11:00 +00:00
Nathan Whitehorn
91416fb268 Modularize the Open Firmware client interface to allow run-time switching
of OFW access semantics, in order to allow future support for real-mode
OF access and flattened device frees. OF client interface modules are
implemented using KOBJ, in a similar way to the PPC PMAP modules.

Because we need Open Firmware to be available before mutexes can be used on
sparc64, changes are also included to allow KOBJ to be used very early in
the boot process by only using the mutex once we know it has been initialized.

Reviewed by:    marius, grehan
2008-12-20 00:33:10 +00:00
Marcel Moolenaar
05002c354b Make gpart the default partitioning class on all platforms.
Both ia64 and powerpc were using gpart exclusively already
so there's no change for those two.

Discussed on: arch@
2008-12-17 17:43:22 +00:00
Warner Losh
db3cd725a5 AT_DEBUG and AT_BRK were OBE like 10 years ago, so retire them.
Reviewed by:	peter
2008-12-17 06:56:58 +00:00
Nathan Whitehorn
94b4a038a1 Adapt parts of the sparc64 Open Firmware bus enumeration code (in particular,
the code for parsing interrupt maps) to PowerPC and reflect their new MI
status by moving them to the shared dev/ofw directory.

This commit also modifies the OFW PCI enumeration procedure on PowerPC to
allow the bus to find non-firmware-enumerated devices that Apple likes to add,
and adds some useful Open Firmware properties (compat and name) to the pnpinfo
string of children on OFW SBus, EBus, PCI, and MacIO links. Because of the
change to PCI enumeration on PowerPC, X has started working again on PPC
machines with Grackle hostbridges.

Reviewed by:	marius
Obtained from:	sparc64
2008-12-15 15:31:10 +00:00
Ed Schouten
bfba40a452 Remove "[KEEP THIS!]" from COMPAT_43TTY. It's not really that important.
Sgtty is a programming interface that has been replaced by termios over
the years. In June we already removed <sgtty.h>, which exposes the
ioctl()'s that are implemented by this interface. The importance of this
flag is overrated right now.
2008-12-02 19:09:08 +00:00
Kip Macy
db7f0b974f - bump __FreeBSD version to reflect added buf_ring, memory barriers,
and ifnet functions

- add memory barriers to <machine/atomic.h>
- update drivers to only conditionally define their own

- add lockless producer / consumer ring buffer
- remove ring buffer implementation from cxgb and update its callers

- add if_transmit(struct ifnet *ifp, struct mbuf *m) to ifnet to
  allow drivers to efficiently manage multiple hardware queues
  (i.e. not serialize all packets through one ifq)
- expose if_qflush to allow drivers to flush any driver managed queues

This work was supported by Bitgravity Inc. and Chelsio Inc.
2008-11-22 05:55:56 +00:00
Marius Strobl
c2526b097f - In GCC 4.2 __builtin_frame_address() was fixed to include the
V9 stack bias so we no longer need to add it in db_backtrace()
  and stack_capture() respectively. This also reverts r182018,
  which kludged around the resulting unaligned access.
- Sync the sun4v versions of db_trace.c and stack_machdep.c with
  the sparc64 ones and fix some style bugs.

MFC after:	3 days
2008-10-27 21:31:14 +00:00
Peter Wemm
e6592ee55c Collect N identical (or near identical) mkdumpheader() implementations into
one, as threatened in the comment.  Textdump magic can be passed in.
2008-10-01 22:08:53 +00:00
Marius Strobl
6f04e7b9aa Remove ipi_all() and ipi_self() as the former hasn't been used at
all to date and the latter also is only used in ia64 and powerpc
code which no longer serves a real purpose after bring-up and just
can be removed as well. Note that architectures like sun4u also
provide no means of implementing IPI'ing a CPU itself natively
in the first place.

Suggested by:	jhb
Reviewed by:	arch, grehan, jhb
2008-09-28 18:34:14 +00:00
Marius Strobl
d8f4dd34d6 Work around Cheetah+ erratum 34 (USIII+ erratum #10) by relocating
the locked entry in it16 slot 0, which typically is occupied by the
PROM, and manually entering locked entries in slots != 0.

Thanks to Hubert Feyrer for donating the Blade 2000 this change was
developed on.
2008-09-10 20:07:08 +00:00
Marius Strobl
fd9d647916 MFsparc64: r177642
Remove sysbeep() from the non-beeping archs.
2008-09-02 21:35:57 +00:00
Marius Strobl
b12572f400 Resurrect clock.c from r164371. 2008-09-02 21:28:04 +00:00
Ed Schouten
bc093719ca Integrate the new MPSAFE TTY layer to the FreeBSD operating system.
The last half year I've been working on a replacement TTY layer for the
FreeBSD kernel. The new TTY layer was designed to improve the following:

- Improved driver model:

  The old TTY layer has a driver model that is not abstract enough to
  make it friendly to use. A good example is the output path, where the
  device drivers directly access the output buffers. This means that an
  in-kernel PPP implementation must always convert network buffers into
  TTY buffers.

  If a PPP implementation would be built on top of the new TTY layer
  (still needs a hooks layer, though), it would allow the PPP
  implementation to directly hand the data to the TTY driver.

- Improved hotplugging:

  With the old TTY layer, it isn't entirely safe to destroy TTY's from
  the system. This implementation has a two-step destructing design,
  where the driver first abandons the TTY. After all threads have left
  the TTY, the TTY layer calls a routine in the driver, which can be
  used to free resources (unit numbers, etc).

  The pts(4) driver also implements this feature, which means
  posix_openpt() will now return PTY's that are created on the fly.

- Improved performance:

  One of the major improvements is the per-TTY mutex, which is expected
  to improve scalability when compared to the old Giant locking.
  Another change is the unbuffered copying to userspace, which is both
  used on TTY device nodes and PTY masters.

Upgrading should be quite straightforward. Unlike previous versions,
existing kernel configuration files do not need to be changed, except
when they reference device drivers that are listed in UPDATING.

Obtained from:		//depot/projects/mpsafetty/...
Approved by:		philip (ex-mentor)
Discussed:		on the lists, at BSDCan, at the DevSummit
Sponsored by:		Snow B.V., the Netherlands
dcons(4) fixed by:	kan
2008-08-20 08:31:58 +00:00
John Baldwin
70d12a18f2 Export 'struct pcpu' to userland w/o requiring _KERNEL. A few ports
already define _KERNEL to get to this and I'm about to add hooks to
libkvm to access per-CPU data.

MFC after:	1 week
2008-08-19 19:53:52 +00:00
Bjoern A. Zeeb
603724d3ab Commit step 1 of the vimage project, (network stack)
virtualization work done by Marko Zec (zec@).

This is the first in a series of commits over the course
of the next few weeks.

Mark all uses of global variables to be virtualized
with a V_ prefix.
Use macros to map them back to their global names for
now, so this is a NOP change only.

We hope to have caught at least 85-90% of what is needed
so we do not invalidate a lot of outstanding patches again.

Obtained from:	//depot/projects/vimage-commit2/...
Reviewed by:	brooks, des, ed, mav, julian,
		jamie, kris, rwatson, zec, ...
		(various people I forgot, different versions)
		md5 (with a bit of help)
Sponsored by:	NLnet Foundation, The FreeBSD Foundation
X-MFC after:	never
V_Commit_Message_Reviewed_By:	more people than the patch
2008-08-17 23:27:27 +00:00
Marius Strobl
0b1bfc4986 - Reimplement {d,i}tlb_enter() and {d,i}tlb_va_to_pa() in C. There's
no particular reason for them to be implemented in assembler and
  having them in C allows easier extension as well as using more C
  macros and {d,i}tlb_slot_max rather than hard-coding magic (and
  actually spitfire-only) values.
- Fix the compilation of pmap_print_tte().
- Change pmap_print_tlb() to use ldxa() rather than re-rolling it
  inline as well as TLB_DAR_SLOT and {d,i}tlb_slot_max rather than
  hardcoding magic (and actually spitfire-only) values.
- While at it, suffix the above mentioned functions with "_sun4u" to
  underline they're architecture-specific.
- Use __FBSDID and macros instead of magic values in locore.S.
- Remove unused includes and smp_stack in locore.S.
2008-08-07 22:46:25 +00:00
Ed Schouten
200d80cd74 Disconnect drivers that haven't been ported to MPSAFE TTY yet.
As clearly mentioned on the mailing lists, there is a list of drivers
that have not been ported to the MPSAFE TTY layer yet. Remove them from
the kernel configuration files. This means people can now still use
these drivers if they explicitly put them in their kernel configuration
file, which is good.

People should keep in mind that after August 10, these drivers will not
work anymore. Even though owners of the hardware are capable of getting
these drivers working again, I will see if I can at least get them to a
compilable state (if time permits).
2008-08-03 10:32:17 +00:00
Xin LI
dbd47f1592 Add HWPMC_HOOKS to GENERIC kernels, this makes hwpmc.ko work out
of the box.
2008-07-07 22:55:11 +00:00
Marius Strobl
1239136645 Given that sun4u uses sparc64/sparc64/in_cksum.c, use the sparc64
<machine/in_cksum.h> here also.

MFC after:	3 days
2008-06-25 21:03:26 +00:00
Ed Schouten
721351876c Remove the unused major/minor numbers from iodev and memdev.
Now that st_rdev is being automatically generated by the kernel, there
is no need to define static major/minor numbers for the iodev and
memdev. We still need the minor numbers for the memdev, however, to
distinguish between /dev/mem and /dev/kmem.

Approved by:	philip (mentor)
2008-06-25 07:45:31 +00:00
David E. O'Brien
99f233296d Use the "options " spelling (vs. "options<TAB>") so that commented lines
line up nicely.
2008-05-21 03:36:53 +00:00
Alan Cox
1ec1304bdb Retire pmap_addr_hint(). It is no longer used. 2008-05-18 04:16:57 +00:00
Alan Cox
2d17f90775 Add a stub for pmap_align_superpage() on machines that don't (yet)
implement pmap-level support for superpages.
2008-05-09 23:31:42 +00:00
Peter Wemm
43d7128c14 Expand kdb_alt_break a little, most commonly used with the option
ALT_BREAK_TO_DEBUGGER.  In addition to "Enter ~ ctrl-B" (to enter the
debugger), there is now "Enter ~ ctrl-P" (force panic) and
"Enter ~ ctrl-R" (request clean reboot, ala ctrl-alt-del on syscons).

We've used variations of this at work.  The force panic sequence is
best used with KDB_UNATTENDED for when you just want it to dump and
get on with it.

The reboot request is a safer way of getting into single user than
a power cycle.  eg: you've hosed the ability to log in (pam, rtld, etc).
It gives init the reboot signal, which causes an orderly reboot.

I've taken my best guess at what the !x86 and non-sio code changes
should be.

This also makes sio release its spinlock before calling KDB/DDB.
2008-05-04 23:29:38 +00:00
Marius Strobl
0b5a77c6a4 Remove an header which is unused for sun4v.
MFC after:	3 days
2008-05-02 17:44:18 +00:00
Marius Strobl
b7ee09f7b0 Remove the MD isa_irq_pending() and the underlying PCI-specific
infrastructure. Its only consumer ever was sio(4) and thus was
unused on sparc64 since removing the last traces of sio(4) in
sparc64 configuration files in favor for uart(4) over three
years ago. If similar functionality is required again it should
be brought back as an MD intr_pending() which works for all
busses by using for example interrupt controller hooks.
2008-04-26 11:01:38 +00:00
Jeff Roberson
6c47aaae12 - Add an integer argument to idle to indicate how likely we are to wake
from idle over the next tick.
 - Add a new MD routine, cpu_wake_idle() to wakeup idle threads who are
   suspended in cpu specific states.  This function can fail and cause the
   scheduler to fall back to another mechanism (ipi).
 - Implement support for mwait in cpu_idle() on i386/amd64 machines that
   support it.  mwait is a higher performance way to synchronize cpus
   as compared to hlt & ipis.
 - Allow selecting the idle routine by name via sysctl machdep.idle.  This
   replaces machdep.cpu_idle_hlt.  Only idle routines supported by the
   current machine are permitted.

Sponsored by:	Nokia
2008-04-25 05:18:50 +00:00
Poul-Henning Kamp
0051271e12 Make genclock standard on all platforms.
Thanks to: grehan & marcel for platform support on ia64 and ppc.
2008-04-21 10:09:55 +00:00
Jeff Roberson
9b33b154b5 - Add the interrupt vector number to intr_event_create so MI code can
lookup hard interrupt events by number.  Ignore the irq# for soft intrs.
 - Add support to cpuset for binding hardware interrupts.  This has the
   side effect of binding any ithread associated with the hard interrupt.
   As per restrictions imposed by MD code we can only bind interrupts to
   a single cpu presently.  Interrupts can be 'unbound' by binding them
   to all cpus.

Reviewed by:	jhb
Sponsored by:	Nokia
2008-04-11 03:26:41 +00:00
John Baldwin
1ee1b68792 Add a MI intr_event_handle() routine for the non-INTR_FILTER case. This
allows all the INTR_FILTER #ifdef's to be removed from the MD interrupt
code.
- Rename the intr_event 'eoi', 'disable', and 'enable' hooks to
  'post_filter', 'pre_ithread', and 'post_ithread' to be less x86-centric.
  Also, add a comment describe what the MI code expects them to do.
- On amd64, i386, and powerpc this is effectively a NOP.
- On arm, don't bother masking the interrupt unless the ithread is
  scheduled in the non-INTR_FILTER case to match what INTR_FILTER did.
  Also, don't bother unmasking the interrupt in the post_filter case if
  we never masked it.  The INTR_FILTER case had been doing this by having
  arm_unmask_irq for the post_filter (formerly 'eoi') hook.
- On ia64, stray interrupts are now masked for the non-INTR_FILTER case.
  They were already masked in the INTR_FILTER case.
- On sparc64, use the a NULL pre_ithread hook and use intr_enable_eoi() for
  both the 'post_filter' and 'post_ithread' hooks to match what the
  non-INTR_FILTER code did.
- On sun4v, retire the ithread wrapper hack by using an appropriate
  'post_ithread' hook instead (it's what 'post_ithread'/'enable' was
  designed to do even in 5.x).

Glanced at by:	piso
Reviewed by:	marius
Requested by:	marius [1], [5]
Tested on:	amd64, i386, arm, sparc64
2008-04-05 19:58:30 +00:00
Doug Rabson
fa9d9930ca Add kernel module support for nfslockd and krpc. Use the module system
to detect (or load) kernel NLM support in rpc.lockd. Remove the '-k'
option to rpc.lockd and make kernel NLM the default. A user can still
force the use of the old user NLM by building a kernel without NFSLOCKD
and/or removing the nfslockd.ko module.
2008-03-27 11:54:20 +00:00
John Birrell
e483943791 When building a kernel module, define MAXCPU the same as SMP so
that modules work with and without SMP.
2008-03-27 05:03:26 +00:00
Poul-Henning Kamp
8c0b6469bf Remove two variables which are handled MI now. 2008-03-26 20:28:52 +00:00
Poul-Henning Kamp
e465985885 The "free-lance" timer in the i8254 is only used for the speaker
these days, so de-generalize the acquire_timer/release_timer api
to just deal with speakers.

The new (optional) MD functions are:
	timer_spkr_acquire()
	timer_spkr_release()
and
	timer_spkr_setfreq()

the last of which configures the timer to generate a tone of a given
frequency, in Hz instead of 1/1193182th of seconds.

Drop entirely timer2 on pc98, it is not used anywhere at all.

Move sysbeep() to kern/tty_cons.c and use the timer_spkr*() if
they exist, and do nothing otherwise.

Remove prototypes and empty acquire-/release-timer() and sysbeep()
functions from the non-beeping archs.

This eliminate the need for the speaker driver to know about
i8254frequency at all.  In theory this makes the speaker driver MI,
contingent on the timer_spkr_*() functions existing but the driver
does not know this yet and still attaches to the ISA bus.

Syscons is more tricky, in one function, sc_tone(), it knows the hz
and things are just fine.

In the other function, sc_bell() it seems to get the period from
the KDMKTONE ioctl in terms if 1/1193182th second, so we hardcode
the 1193182 and leave it at that.  It's probably not important.

Change a few other sysbeep() uses which obviously knew that the
argument was in terms of i8254 frequency, and leave alone those
that look like people thought sysbeep() took frequency in hertz.

This eliminates the knowledge of i8254_freq from all but the actual
clock.c code and the prof_machdep.c on amd64 and i386, where I think
it would be smart to ask for help from the timecounters anyway [TBD].
2008-03-26 20:09:21 +00:00
Poul-Henning Kamp
b416a29043 Remove old sysctl stuff which is long gone in other arch's. 2008-03-26 13:03:51 +00:00
Pawel Jakub Dawidek
ab35440fa1 Oops. Use atomic_add_long() for atomic_fetchadd_long() (not atomic_add_int())
for sparc64 and sun4v.

Noticed by:	marius
2008-03-19 07:27:24 +00:00
John Baldwin
07f7fccaaf Catch up to intr_event_create() prototype change.
Pointy hat:	jhb
2008-03-18 13:31:45 +00:00
Pawel Jakub Dawidek
6eb4157ffc Implement atomic_fetchadd_long() for all architectures and document it.
Reviewed by:	attilio, jhb, jeff, kris (as a part of the uidinfo_waitfree.patch)
2008-03-16 21:20:50 +00:00
John Baldwin
eaf86d1678 Add preliminary support for binding interrupts to CPUs:
- Add a new intr_event method ie_assign_cpu() that is invoked when the MI
  code wishes to bind an interrupt source to an individual CPU.  The MD
  code may reject the binding with an error.  If an assign_cpu function
  is not provided, then the kernel assumes the platform does not support
  binding interrupts to CPUs and fails all requests to do so.
- Bind ithreads to CPUs on their next execution loop once an interrupt
  event is bound to a CPU.  Only shared ithreads are bound.  We currently
  leave private ithreads for drivers using filters + ithreads in the
  INTR_FILTER case unbound.
- A new intr_event_bind() routine is used to bind an interrupt event to
  a CPU.
- Implement binding on amd64 and i386 by way of the existing pic_assign_cpu
  PIC method.
- For x86, provide a 'intr_bind(IRQ, cpu)' wrapper routine that looks up
  an interrupt source and binds its interrupt event to the specified CPU.
  MI code can currently (ab)use this by doing:

	intr_bind(rman_get_start(irq_res), cpu);

  however, I plan to add a truly MI interface (probably a bus_bind_intr(9))
  where the implementation in the x86 nexus(4) driver would end up calling
  intr_bind() internally.

Requested by:	kmacy, gallatin, jeff
Tested on:	{amd64, i386} x {regular, INTR_FILTER}
2008-03-14 19:41:48 +00:00
Jeff Roberson
32c9d3a767 - Rather than repeating the same preemption code everywhere call the scheduler
specific sched_preempt() routine.
2008-03-10 01:32:48 +00:00
Jeff Roberson
81aa71755b - Remove the old smp cpu topology specification with a new, more flexible
tree structure that encodes the level of cache sharing and other
   properties.
 - Provide several convenience functions for creating one and two level
   cpu trees as well as a default flat topology.  The system now always
   has some topology.
 - On i386 and amd64 create a seperate level in the hierarchy for HTT
   and multi-core cpus.  This will allow the scheduler to intelligently
   load balance non-uniform cores.  Presently we don't detect what level
   of the cache hierarchy is shared at each level in the topology.
 - Add a mechanism for testing common topologies that have more information
   than the MD code is able to provide via the kern.smp.topology tunable.
   This should be considered a debugging tool only and not a stable api.

Sponsored by:	Nokia
2008-03-02 07:58:42 +00:00
Ruslan Ermilov
007b1b7bae Add a wrapper function that bound checks writes to the dump device. 2008-01-28 19:04:07 +00:00
Alan Cox
eb2a051720 Add an access type parameter to pmap_enter(). It will be used to implement
superpage promotion.

Correct a style error in kmem_malloc(): pmap_enter()'s last parameter is
a Boolean.
2008-01-03 07:34:34 +00:00
Alan Cox
b8e7fc24fe Add configuration knobs for the superpage reservation system. Initially,
the reservation will only be enabled on amd64.
2007-12-27 16:45:39 +00:00
Robert Watson
3de213cc00 Add a new 'why' argument to kdb_enter(), and a set of constants to use
for that argument.  This will allow DDB to detect the broad category of
reason why the debugger has been entered, which it can use for the
purposes of deciding which DDB script to run.

Assign approximate why values to all current consumers of the
kdb_enter() interface.
2007-12-25 17:52:02 +00:00