o Create struct mpserver as part of struct mp.
mpserver creates a unix-domain socket based on the
peers auth name and endpoint discriminator. If it
already exists, ppp will ``pass the link'' over to
the owner of the socket, joining it into the bundle
of another ppp invocation, otherwise ppp waits for
other invocations to pass it links through this
socket.
The final piece of code will be the code that flattens
our datalink info and passes it down this channel
(not yet implemented).
is particularily useful when creating dial filters.
Original work by: Junichi SATOH (junichi@astec.co.jp)
o Parse a filter IP of ``0.0.0.0'' as having a width of 0,
not 32.
o Correct "set filter" usage message.
o Warn about bad filter names.
o Expand and correct a number of the man page sections.
o Move Var*Version into command.c
o Remove struct pppVars (and there was much rejoicing) !
o Forward-decl some structs in .h files to avoid include
ordering requirements and remove a few more redundant
#includes.
o Our diagnostic socket has its password set in the `set socket'
line only (not in ppp.secret).
o Passwords are per server socket (*VarAuthKey are gone)
o Authority is per prompt (VarLocalAuth is gone).
o Local logging is per prompt.
o Add a `show who' command to see who's connected. No identd
routine - just a `where the connection came from' display.
o SIGUSR1 is disabled for now - we have no way of choosing a
password for the socket created :-(
Prompts are attached as a list of `struct descriptor's in
struct bundle, and serviced under the bundles descriptor
service routines. Ultimately, everything should be done
like this.
Cosmetic:
o alphabeticalise SRCS in Makefile.
o Add a few comments in command.h
TODO: Start checking that we don't overflow the descriptor sets
in select() now that we can have any number of descriptors.
phase DEAD. They'll almost definitely have timed out
by the time we dial anyway.
o Log dial filters again (LogTCPIP).
o Make DEBUG diagnostics for filter checking actually mean
something to the common observer.
o Do our best to keep any already-configured IP numbers at
IPCP negotiation time. We always first request our configured
IP, and if the peer asks for an invalid IP, we NAK with HISADDR
Cosmetic:
o Add a linefeed to the `set timeout' arg count error message.
o Log unacceptable address errors to LogPHASE if LogIPCP is
switched off.
o Fix ``destination system not found'' error message.
o Get out immediately if we get a fatal error before entering
the main loop.
o Remove bundle2lcp(), bundle2ccp() and bundle2link().
They're too resource-hungry and we have `owner pointers'
to do their job.
o Make our FSM understand LCPs that are always ST_OPENED
(with a minimum code that != 1).
o Send FSM code rejects for invalid codes.
o Make our bundle fsm_parent deal with multiple links.
o Make timer diagnostics pretty and allow access via ~t
in `term' mode (not just when logging debug) and
`show timers'. Only show timers every second in debug
mode, otherwise we get too many diagnostics to be useful
(we probably still do). Also, don't restrict ~m in term
mode to depend on debug logging.
o Rationalise our bundles' phases.
o Create struct mp (multilink protocol). This is both an
NCP and a type of struct link. It feeds off other NCPs
for output, passing fragmented packets into the queues
of available datalinks. It also gets PROTO_MP input,
reassembles the fragments into ppp frames, and passes
them back to the HDLC layer that the fragments were passed
from.
** It's not yet possible to enter multilink mode :-( **
o Add `set weight' (requires context) for deciding on a links
weighting in multilink mode. Weighting is simplistic (and
probably badly implemented) for now.
o Remove the function pointers in struct link. They ended up
only applying to physical links.
o Configure our tun device with an MTU equal to the MRU from
struct mp's LCP and a speed equal to the sum of our link
speeds.
o `show {lcp,ccp,proto}' and `set deflate' now have optional
context and use ChooseLink() to decide on which `struct link'
to use. This allows behaviour as before when in non-multilink
mode, and allows access to the MP logical link in multilink
mode.
o Ignore reconnect and redial values when in -direct mode and
when cleaning up. Always redial when in -ddial or -dedicated
mode (unless cleaning up).
o Tell our links to `staydown' when we close them due to a signal.
o Remove remaining `#ifdef SIGALRM's (ppp doesn't function without
alarms).
o Don't bother strdup()ing our physical link name.
o Various other cosmetic changes.
Increment OutPackets for any packet - not just LQRs
MFC:
o Fix a few comment typos.
o Fix ``set timeout'' usage message and documentation.
o Change ifOutPackets, ifOutOctets and ifOutLQRs to `u_int32_t's
so that they wrap correctly.
o Put the LQR in network byte order using the correct struct size
(sizeof u_int32_t, not sizeof u_long).
o Wrap LQR ECHO counters correctly.
o Don't increment OutLQR count if the last LQR hasn't been replied
to.
o Initialise last received LQR in StartLqm.
o Don't start the LQR timer if we're `disabled' and `accepted'.
o Generate LQR responses when both sides are using a timer and
we're not going to send our next LQR before the peers max timeout.
IPCP, CCP and LCP are now just derived FSMs.
Comment each of the FSM implementations so that we can
tell what's going on.
Revise the state transitions so that CCP and IPCP actually
send terminate REQs when appropriate.
The OS & IPCP layers are still like spagetti (next job).
o Use INADDR_ANY and INADDR_BROADCAST instead of 0 and 0xffffffff
for IP addresses & masks.
o Move struct compreq into ipcp.c (it's none of anyone elses
business).
o Rename MAX_STATES to MAX_VJ_STATES.
Validate the peers suggested IP by attempting to make a routing table
entry.
Give up IPCP negotiation if the peer NAKs us with an unusable IP.
Always SIOCDIFADDR then SIOCAIFADDR when configuring the tun device.
Using SIOCSIFDSTADDR allows duplicate dst addresses (which we don't
want)!!!
Allow up to 200 interface names (was 50) (now that ppp can play server
properly).
Up the version number (1.5 -> 1.6).
Cosmetic:
Log unexpected CCP packets in the CCP log rather than the ERROR log.
Log unexpected Config Reqs in the appropriate LCP/IPCP/CCP log rather
than the ERROR log.
Log failed route additions and deletions with WARN, not TCPIP.
Log the option id and length for unrecognised IPCP options.
Change some .Sq to .Ar in the man page.
Remove extraneous decls.
Add ``const'' to several places.
Allow ``make NOALIAS=1'' to remove IP aliasing.
Merge with OpenBSD - only the Makefiles vary.
We can now survive a compile with
-Wall -Wbad-function-cast -Wcast-align -Wcast-qual
-Winline -Wmissing-declarations -Wmissing-prototypes
-Wnested-externs -Wpointer-arith -Wredundant-decls
-Wshadow -Wstrict-prototypes -Wwrite-strings -Wchar-subscripts
(although the Makefile just contains -Wall).
o Add missing $Id$s
o Move extern decls from .c -> .h files
o Staticize
o Remove #includes from .h files
o style(9)ify includes
o bcopy -> memcpy
bzero -> memset
bcmp -> memcmp
index -> strchr
rindex -> strrchr
o Move timeout.h -> timer.h (making it consistent w/ timer.c)
o Add -Wmissing-prototypes
o Use syslog
o Remove references to stdout/stderr (incl perror())
o Introduce VarTerm - the interactive terminal or zero
o Allow "set timeout" to affect current session
o Change "set debug" to "set log"
o Allow "set log [+|-]flag"
o Make MSEXT and PASSWDAUTH stuff the default
o Move all #ifdef DEBUG stuff into the code - this
shouldn't be too much overhead. It's now controlled
with "set log +debug"
o Add "set log command, debug, tun, warn, error, alert"
o Remove cdefs.h, and assume an ansi compiler.
o Improve all diagnostic output
o Don't trap SIGSEGV
o SIGHUP now terminates again (log files are controlled
by syslog)
o Call CloseModem() when changing devices
o Fix parsing of third arg of "delete"
I think this fixes the "magic is same" problems that some
people have been experiencing.
The man page is being rewritten. It'll follow soon.
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.
Boy, I'm glad we're not using sup anymore. This update would have been
insane otherwise.
dropped - devet@adv.IAEhv.nl (Arjan de Vet)
2. Will not read data from telnet connection - John Capo <jc@irbs.com>
3. Using LQM option could be drop the link due to LcpLayerDown() doesn't
stop LQR timer. - Brian <brian@awfulhak.demon.co.uk>
4. Allow to describe a syntax of filters that is not only port number
but also by name in /etc/service. - Rich Murphey <rich@lamprey.utmb.edu>
Reviewed by: Atsushi Murai <amurai@spec.co.jp>
Submitted by: devet@adv.IAEhv.nl, jc@irbs.com, brian@awfulhak.demon.co.uk,
rich@lamprey.utmb.edu
o Supporting SYNC SIO device (But need a device driver)
- add "set speed sync"
o Fixing bug for Predictor-1 function.
o Add new parameter that re-sent interval for set timeout commands.
o Improving RTT (Round Trip Time) and reducing processor time.
- Previous Timer service was using polling, and now using
SIGALRM ;-)
- A 0.94beta2 will not work correctly....
-- Follows are additinal feature not including 0.94beta2
o Support Proxy ARP
- add "enable/disable proxy" commands
o Marging common routine in CHAP/PAP.
o Enhancing LCP/IPCP log information.
o Support local Authfication connection on port 300x and tty.
- You can set up pair of your "hostname -s" and
password in ppp.secret. if either ppp.secret file nor
your hostname line don't exist, It will notify a message
and working as same as previous version.(Backword compatibility)
- If you did set up them, It's allow connection but nothing to do
except help and passwd command.
- add "passwd yourpasswd" commands
o Support afilter - keep Alive filter that a packet can send/receiving
according to ifilter/ofilter but doesn't count it as preventing idle
timer expires.
- Same syntax of other filters.
o Fixing bugs reported by current user for previous one. Thanks !!
Reviewed by: Atsushi Murai (amurai@spec.co.jp)
IP addresses and/or protocol+port, but in the case where both are
supplied, it happily accepts the command but ignores the proto+port
It also attempts to handle the case where the second IP address
is omitted, but this doesn't work.
Reviewed by: amurai@spec.co.jp
Submitted by: Andrew.Gordon@net-tel.co.uk
