prototyped functions to get a sigset_t, and further to check for any
queued signals, rather than an empty signal set, to go with the move
to signal queues rather than signal sets.
obtain the send lock, we would bogusly try to unlock the send lock before
returning resulting in a panic. Instead, only unlock the send lock if
nfs_sndlock() succeeds and nfs_reconnect() fails.
MFC after: 3 days
Sponsored by: The Weather Channel
nfs_readlink() calls nfs_bioread() which passes in uio_td as the thread
argument to nfs_getcacheblk(). In nfs_getcacheblk() we dereference the
thread pointer to get a process pointer to pass to nfs_sigintr(). This
obviously results in a panic. :)
Rather than change nfs_getcacheblk() to check if the thread pointer is
NULL when calling nfs_sigintr() like other callers do, change
nfs_sigintr() to take a thread as the last argument instead of a
process so none of the callers have to care if the thread is NULL or not.
o Add a mutex (sb_mtx) to struct sockbuf. This protects the data in a
socket buffer. The mutex in the receive buffer also protects the data
in struct socket.
o Determine the lock strategy for each members in struct socket.
o Lock down the following members:
- so_count
- so_options
- so_linger
- so_state
o Remove *_locked() socket APIs. Make the following socket APIs
touching the members above now require a locked socket:
- sodisconnect()
- soisconnected()
- soisconnecting()
- soisdisconnected()
- soisdisconnecting()
- sofree()
- soref()
- sorele()
- sorwakeup()
- sotryfree()
- sowakeup()
- sowwakeup()
Reviewed by: alfred
where some client operations might be unexpectedly cancelled during
an unsuccessful non-forced unmount attempt. This causes problems
for amd(8), because it periodically attempts a non-forced unmount
to check if the filesystem is still in use.
Fix this by adding a new mountpoint flag MNTK_UNMOUNTF that is set
only during the operation of a forced unmount. Use this instead of
MNTK_UNMOUNT to trigger the cancellation of hung NFS operations.
Also correct a problem where dounmount() might inadvertently clear
the MNTK_UNMOUNT flag.
Reported by: simokawa
MFC after: 1 week
this is a low-functionality change that changes the kernel to access the main
thread of a process via the linked list of threads rather than
assuming that it is embedded in the process. It IS still embeded there
but remove all teh code that assumes that in preparation for the next commit
which will actually move it out.
Reviewed by: peter@freebsd.org, gallatin@cs.duke.edu, benno rice,
process of being unmounted. This allows forced NFS unmounts to
complete even if there are processes stuck holding the mnt_lock
while the server is down. The mechanism is not ideal in that there
is a small chance we might accidentally cancel requests during a
failed non-forced unmount attempt on that filesystem, but this
is not really a big problem.
Also, move the tsleep() in nfs_nmcancelreqs() so that we do not
sleep in the case where there are no requests to be cancelled.
down, even if there are hung processes and the mount is non-
interruptible.
This works by having nfs_unmount call a new function nfs_nmcancelreqs()
in the FORCECLOSE case. It scans the list of outstanding requests
and marks as interrupted any requests belonging to the specified
mount. Then it waits up to 30 seconds for all requests to terminate.
A few other changes are necessary to support this:
- Unconditionally set a socket timeout so that even hard mounts
are guaranteed to occasionally check the R_SOFTTERM flag on
requests. For hard mounts this flag can only be set by
nfs_nmcancelreqs().
- Reject requests on a mount that is currently being unmounted.
- Never grant the receive lock to a request that has been cancelled.
This should also avoid an old problem where a forced NFS unmount
could cause a crash; it occurred when a VOP on an unlocked vnode
(usually VOP_GETATTR) was in progress at the time of the forced
unmount.
socreate(), rather than getting it implicitly from the thread
argument.
o Make NFS cache the credential provided at mount-time, and use
the cached credential (nfsmount->nm_cred) when making calls to
socreate() on initially connecting, or reconnecting the socket.
This fixes bugs involving NFS over TCP and ipfw uid/gid rules, as well
as bugs involving NFS and mandatory access control implementations.
Reviewed by: freebsd-arch
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.
Sorry john! (your next MFC will be a doosie!)
Reviewed by: peter@freebsd.org, dillon@freebsd.org
X-MFC after: ha ha ha ha
other "system" header files.
Also help the deprecation of lockmgr.h by making it a sub-include of
sys/lock.h and removing sys/lockmgr.h form kernel .c files.
Sort sys/*.h includes where possible in affected files.
OK'ed by: bde (with reservations)
This is because calls with M_WAIT (now M_TRYWAIT) may not wait
forever when nothing is available for allocation, and may end up
returning NULL. Hopefully we now communicate more of the right thing
to developers and make it very clear that it's necessary to check whether
calls with M_(TRY)WAIT also resulted in a failed allocation.
M_TRYWAIT basically means "try harder, block if necessary, but don't
necessarily wait forever." The time spent blocking is tunable with
the kern.ipc.mbuf_wait sysctl.
M_WAIT is now deprecated but still defined for the next little while.
* Fix a typo in a comment in mbuf.h
* Fix some code that was actually passing the mbuf subsystem's M_WAIT to
malloc(). Made it pass M_WAITOK instead. If we were ever to redefine the
value of the M_WAIT flag, this could have became a big problem.
reserve, in maximal NFS packets. Originally only 2 packets worth of
space was reserved. The default is now 4, which appears to greatly
improve performance for slow to mid-speed machines on gigabit networks.
Add documentation and correct some prior documentation.
Problem Researched by: Andrew Gallatin <gallatin@cs.duke.edu>
Approved by: jkh
of element [4] in both, which goes beyond the end of the array, leaving
[0], [1], [2], and [3]. This bug did not cause any problems since
the overrun fields are initialized after the bogus array init but
needs to be fixed anyway.
Submitted by: Ian Dowse <iedowse@maths.tcd.ie>
-----------------------------
The core of the signalling code has been rewritten to operate
on the new sigset_t. No methodological changes have been made.
Most references to a sigset_t object are through macros (see
signalvar.h) to create a level of abstraction and to provide
a basis for further improvements.
The NSIG constant has not been changed to reflect the maximum
number of signals possible. The reason is that it breaks
programs (especially shells) which assume that all signals
have a non-null name in sys_signame. See src/bin/sh/trap.c
for an example. Instead _SIG_MAXSIG has been introduced to
hold the maximum signal possible with the new sigset_t.
struct sigprop has been moved from signalvar.h to kern_sig.c
because a) it is only used there, and b) access must be done
though function sigprop(). The latter because the table doesn't
holds properties for all signals, but only for the first NSIG
signals.
signal.h has been reorganized to make reading easier and to
add the new and/or modified structures. The "old" structures
are moved to signalvar.h to prevent namespace polution.
Especially the coda filesystem suffers from the change, because
it contained lines like (p->p_sigmask == SIGIO), which is easy
to do for integral types, but not for compound types.
NOTE: kdump (and port linux_kdump) must be recompiled.
Thanks to Garrett Wollman and Daniel Eischen for pressing the
importance of changing sigreturn as well.
txdr_hyper and fxdr_hyper tweaks to avoid excessive CPU order knowledge.
nfs_serv.c: don't call nfsm_adj() with negative values, windows clients
could crash servers when doing a readdir of a large directory.
nfs_socket.c: Use IP_PORTRANGE to get a priviliged port without a spin
loop trying to bind(). Don't clobber a mbuf pointer or we get panics
on a NFS3ERR_JUKEBOX error from a server when reusing a freed mbuf.
nfs_subs.c: Don't loose st_blocks on NFSv2 mounts when > 2GB.
Obtained from: OpenBSD
piecemeal, middle-of-file writes for NFS. These hacks have caused no
end of trouble, especially when combined with mmap(). I've removed
them. Instead, NFS will issue a read-before-write to fully
instantiate the struct buf containing the write. NFS does, however,
optimize piecemeal appends to files. For most common file operations,
you will not notice the difference. The sole remaining fragment in
the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache
coherency issues with read-merge-write style operations. NFS also
optimizes the write-covers-entire-buffer case by avoiding the
read-before-write. There is quite a bit of room for further
optimization in these areas.
The VM system marks pages fully-valid (AKA vm_page_t->valid =
VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This
is not correct operation. The vm_pager_get_pages() code is now
responsible for marking VM pages all-valid. A number of VM helper
routines have been added to aid in zeroing-out the invalid portions of
a VM page prior to the page being marked all-valid. This operation is
necessary to properly support mmap(). The zeroing occurs most often
when dealing with file-EOF situations. Several bugs have been fixed
in the NFS subsystem, including bits handling file and directory EOF
situations and buf->b_flags consistancy issues relating to clearing
B_ERROR & B_INVAL, and handling B_DONE.
getblk() and allocbuf() have been rewritten. B_CACHE operation is now
formally defined in comments and more straightforward in
implementation. B_CACHE for VMIO buffers is based on the validity of
the backing store. B_CACHE for non-VMIO buffers is based simply on
whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear,
and vise-versa). biodone() is now responsible for setting B_CACHE
when a successful read completes. B_CACHE is also set when a bdwrite()
is initiated and when a bwrite() is initiated. VFS VOP_BWRITE
routines (there are only two - nfs_bwrite() and bwrite()) are now
expected to set B_CACHE. This means that bowrite() and bawrite() also
set B_CACHE indirectly.
There are a number of places in the code which were previously using
buf->b_bufsize (which is DEV_BSIZE aligned) when they should have
been using buf->b_bcount. These have been fixed. getblk() now clears
B_DONE on return because the rest of the system is so bad about
dealing with B_DONE.
Major fixes to NFS/TCP have been made. A server-side bug could cause
requests to be lost by the server due to nfs_realign() overwriting
other rpc's in the same TCP mbuf chain. The server's kernel must be
recompiled to get the benefit of the fixes.
Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
routine was [ab]used for two different things, and you couldn't tell from
the wait channel which one had wedged.
Catch a few things missing from NFS_NOSERVER.
is less than NFS_MINPACKET or greater than NFS_MAXPACKET in size, it
barfs and, I think, drops the connection.
However, there's no guarantee that in a multi-fragment RPC, all the
fragments will be at least as large as NFS_MINPACKET.
In fact, with the version of "tclnfs" we have here, which supports NFS
over TCP, at least when built under SunOS 4.1.3 (i.e., with 4.1.3's
user-mode ONC RPC library), I can *repeatably* cause "tclnfs" to send a
request with more than one fragment, one of which is only 8 bytes long.
I just do a 3877-byte write to a file, at an offset of 0.
The check that "slp->ns_reclen" is greater than or equal to
NFS_MINPACKET serves no useful purpose - if the NFS server code can't
handle packets < NFS_MINPACKET bytes, it can't handle them over *any*
protocol, so the check has to be done above the RPC-over-TCP layer - and
should be removed.
Obtained from: Fix from Guy Harris, forwarded by Rick Macklem.
detachment of vfs sysctls. Unloading of vfs LKMs doesn't actually
work for any vfs, since it leaves garbage pointers to memory
allocation control structures.
another specialized mbuf type in the process. Also clean up some
of the cruft surrounding IPFW, multicast routing, RSVP, and other
ill-explored corners.
interface congestion (eg: nfs over a ppp link, etc). Don't log these
for UDP mounts, and don't cause syscalls to fail with EINTR.
This stops the 'nfs send error 55' warnings.
If the error is because the system is really hosed, this is the least
of your problems...
respectively. Most of the longs should probably have been
u_longs, but this changes is just to prevent warnings about
casts between pointers and integers of different sizes, not
to fix poorly chosen types.
FreeBSD/alpha. The most significant item is to change the command
argument to ioctl functions from int to u_long. This change brings us
inline with various other BSD versions. Driver writers may like to
use (__FreeBSD_version == 300003) to detect this change.
The prototype FreeBSD/alpha machdep will follow in a couple of days
time.
of this part of commits is to minimize unnecessary differences between
the other NFS's of similar origin. Yes, there are gratuitous changes here
that the style folks won't like, but it makes the catch-up less difficult.
We had run out of bits in the nfs mount flags, I have moved the internal
state flags into a seperate variable. These are no longer visible via
statfs(), but I don't know of anything that looks at them.
"time" wasn't a atomic variable, so splfoo() protection were needed
around any access to it, unless you just wanted the seconds part.
Most uses of time.tv_sec now uses the new variable time_second instead.
gettime() changed to getmicrotime(0.
Remove a couple of unneeded splfoo() protections, the new getmicrotime()
is atomic, (until Bruce sets a breakpoint in it).
A couple of places needed random data, so use read_random() instead
of mucking about with time which isn't random.
Add a new nfs_curusec() function.
Mark a couple of bogosities involving the now disappeard time variable.
Update ffs_update() to avoid the weird "== &time" checks, by fixing the
one remaining call that passwd &time as args.
Change profiling in ncr.c to use ticks instead of time. Resolution is
the same.
Add new function "tvtohz()" to avoid the bogus "splfoo(), add time, call
hzto() which subtracts time" sequences.
Reviewed by: bde
Distribute all but the most fundamental malloc types. This time I also
remembered the trick to making things static: Put "static" in front of
them.
A couple of finer points by: bde
socket addresses in mbufs. (Socket buffers are the one exception.) A number
of kernel APIs needed to get fixed in order to make this happen. Also,
fix three protocol families which kept PCBs in mbufs to not malloc them
instead. Delete some old compatibility cruft while we're at it, and add
some new routines in the in_cksum family.
This commit includes the following changes:
1) Old-style (pr_usrreq()) protocols are no longer supported, the compatibility
glue for them is deleted, and the kernel will panic on boot if any are compiled
in.
2) Certain protocol entry points are modified to take a process structure,
so they they can easily tell whether or not it is possible to sleep, and
also to access credentials.
3) SS_PRIV is no more, and with it goes the SO_PRIVSTATE setsockopt()
call. Protocols should use the process pointer they are now passed.
4) The PF_LOCAL and PF_ROUTE families have been updated to use the new
style, as has the `raw' skeleton family.
5) PF_LOCAL sockets now obey the process's umask when creating a socket
in the filesystem.
As a result, LINT is now broken. I'm hoping that some enterprising hacker
with a bit more time will either make the broken bits work (should be
easy for netipx) or dike them out.
form `tv = time'. Use a new function gettime(). The current version
just forces atomicicity without fixing precision or efficiency bugs.
Simplified some related valid accesses by using the central function.
changes, so don't expect to be able to run the kernel as-is (very well)
without the appropriate Lite/2 userland changes.
The system boots and can mount UFS filesystems.
Untested: ext2fs, msdosfs, NFS
Known problems: Incorrect Berkeley ID strings in some files.
Mount_std mounts will not work until the getfsent
library routine is changed.
Reviewed by: various people
Submitted by: Jeffery Hsu <hsu@freebsd.org>
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.
Boy, I'm glad we're not using sup anymore. This update would have been
insane otherwise.
if a single process is performing a large number of requests (in this
case writing a large file). The writing process could monopolise the
recieve lock and prevent any other processes from recieving their
replies.
It also adds a new sysctl variable 'vfs.nfs.dwrite' which controls the
behaviour which originally pointed out the problem. When a process
writes to a file over NFS, it usually arranges for another process
(the 'iod') to perform the request. If no iods are available, then it
turns the write into a 'delayed write' which is later picked up by the
next iod to do a write request for that file. This can cause that
particular iod to do a disproportionate number of requests from a
single process which can harm performance on some NFS servers. The
alternative is to perform the write synchronously in the context of
the original writing process if no iod is avaiable for asynchronous
writing.
The 'delayed write' behaviour is selected when vfs.nfs.dwrite=1 and
the non-delayed behaviour is selected when vfs.nfs.dwrite=0. The
default is vfs.nfs.dwrite=1; if many people tell me that performance
is better if vfs.nfs.dwrite=0 then I will change the default.
Submitted by: Hidetoshi Shimokawa <simokawa@sat.t.u-tokyo.ac.jp>
pr_usrreq mechanism which was poorly designed and error-prone. This
commit renames pr_usrreq to pr_ousrreq so that old code which depended on it
would break in an obvious manner. This commit also implements the new
interface for TCP, although the old function is left as an example
(#ifdef'ed out). This commit ALSO fixes a longstanding bug in the
TCP timer processing (introduced by davidg on 1995/04/12) which caused
timer processing on a TCB to always stop after a single timer had
expired (because it misinterpreted the return value from tcp_usrreq()
to indicate that the TCB had been deleted). Finally, some code
related to polling has been deleted from if.c because it is not
relevant t -current and doesn't look at all like my current code.
Poul mentioned that he thought this was some kind of timing problem, and
that started me thinking. After a little poking around, I found that
nfs_timer() was completely disabled when NFS_NOSERVER was #defined.
But after looking at nfs_timer(), it seemed like it was something
required by both the client and server code, and disabling it outright
just didn't seem to make any sense. Parts of it relate only to the
NFS server side code, so I disabled those, but I re-enabled the rest
of the function and made sure that it would be called from nfs_init()
(in nfs_subs.c).
With nfs_timer() re-enabled, everything seems to work again. The only
other changes I made were to #ifdef away some variable declarations
in the NFS_NOSERVER case so that gcc would stop complaining about
unused variables.
Reviewed by: phk
Submitted by: Bill Paul <wpaul@skynet.ctr.columbia.edu>
The version 2 support has been tested (client+server) against FreeBSD-2.0,
IRIX 5.3 and FreeBSD-current (using a loopback mount). The version 2 support
is stable AFAIK.
The version 3 support has been tested with a loopback mount and minimally
against an IRIX 5.3 server. It needs more testing and may have problems.
I have patched amd to support the new variable length filehandles although
it will still only use version 2 of the protocol.
Before booting a kernel with these changes, nfs clients will need to at least
build and install /usr/sbin/mount_nfs. Servers will need to build and
install /usr/sbin/mountd.
NFS diskless support is untested.
Obtained from: Rick Macklem <rick@snowhite.cis.uoguelph.ca>
