The micro-Firewall DTS is now a single BSD licensed file.
Reported by: manu
Obtained from: pfSense
MFC after: 2 weeks
Sponsored by: Rubicon Communications, LLC (Netgate)
Apparently the libstand dosfs optimization is a bit too optimistic
and did introduce possible memory corruption.
This patch is backing out the bad part and since this results in
dosfs reading full blocks now, we can also remove extra offset argument
from dv_strategy callback.
The analysis of the issue and the backout patch is provided by Mikhail Kupchik.
PR: 214423
Submitted by: Mikhail Kupchik
Reported by: Mikhail Kupchik
Reviewed by: bapt, allanjude
Approved by: allanjude (mentor)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D8644
The boot2 family of bootblocks (zfsboot/gptzfsboot) are using separate
implementation if keyboard reading code, which has deadlock case when
extended key (arrows etc) are pressed.
The problem is about avoiding the noise from some systems, generating
false key events with scan code 1 and ascii code 00, so the code
does attempt to filter such cases out. Unfortunately the extended keys
also set ascii 0, and therefore the pressed key event is ignored and
the keypress is never read, resulting in infinite loop.
This update is moving the check to keyhit() function and is allowing
the rest of the code to process the extended keys.
Reviewed by: bapt, allanjude
Approved by: allanjude (mentor)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D8608
Clang disallows ambiguous instructions (GNU as has a default based on
chosen .code setting). We only need 'orb' here because KARGS_FLAGS_PXE
fits in a byte; this is the same as done in bxeboot.
Reviewed by: kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8959
With default settings GNU ld generates two PT_LOADs for loader.sym while
LLD generates three, because it creates a rodata segment. Previously
btxldr terminated phdr processing after two PT_LOADs. Remove the early
termination to process all PT_LOADs.
Reviewed by: kib, tsoome
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8929
It is simpler and cleaner to have strip produce the stripped output
directly than copying the input to the output first.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
When WITH_REPRODUCIBLE_BUILD=yes is set in src.conf(5), eliminate the
time, user, and host from the loader's version information. This allows
builds to produce bit-for-bit identical output.
Reviewed by: bapt
MFC after: 1 month
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8842
The Makefile rule to create vers.c for loader version info was
previously duplicated in each of the various loader Makefiles.
Instead, share a common rule in Makefile.inc.
Reviewed by: bapt
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8841
Instead of repeating "%s, Revision %s" "(%s %s)" in each loader, just
create the full version string in vers.c
Reviewed by: bapt
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8823
being a bootstrap tool. However, for reproducible build output,
FreeBSD added dd status=none because it was otherwise difficult to
suppress the status information, but retain any errors that might
happen. There's no real reason that dd has to be a build tool, other
than we use status=none unconditional. Remove dd from a bootstrap tool
entirely by only using status=none when available. This may also help
efforts to build the system on non-FreeBSD hosts as well.
Differential Revision: https://reviews.freebsd.org/D8605
Prior to this change the loader self relocation code interpreted amd64's
rela relocations as if they were rel relocations, discarding the addend.
This "works" because GNU ld 2.17.50 stores the addend value in both the
r_addend field of the relocation (as expected) and at the target of the
relocation.
Other linkers, and possibly other versions of GNU ld, won't have this
behaviour, so interpret the relocations correctly.
Reported by: George Rimar
Reviewed by: andrew
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8681
UEXT are Universal EXTension connector from Olimex. They embed i2c, spi
and uart pins along power in one connector and are found on most,
if not all, Olimex boards.
The Olimex A20 SOM EVB have two UEXT connector so enable the nodes found on
those two connectors.
Patch has been applied upstream, in the meantime add the nodes to our custom
DTS.
Remove empty wrapper for sys/gnu version of am335x-evm.dts located in
sys/boot/fdt, with current include paths priority it's recursive #include
and current build system can find file in sys/gnu when generating dtb
Reported by: Jared McNeill
The version check for sku and family values is not correct, as this data is
valid for version 2.4+, that also includes version 3.0 and above.
Reported by: Dan McDonald
Reviewed by: allanjude
Approved by: allanjude (mentor)
Differential Revision: https://reviews.freebsd.org/D8578
lsdev command does walk over devsw list, prints list element name and
will use dv_print() callback to print the device list.
Unfortunately this approach will add unneeded noise when there are no
particular devices detected.
To remove "empty" device section headers, the dv_print() callback
should print the header instead.
In addition, fixed dv_print callback for md module.
Reviewed by: imp
Approved by: imp (mentor)
Differential Revision: https://reviews.freebsd.org/D8551
The salt based checksum mechanisms, such as skein, are storing the seed
in spa structure, and need to access the spa to use the seed. The current
mechanism for quick access to correct spa is via pointer provided by
vdev structure, but unfortunately the current code does set spa only
for the leaf vdev. This patch will fix the issue by making sure the
loader zfs reader will set spa also for top-level vdevs.
PR: 214375
Reported by: lstewart
Reviewed by: allanjude, imp
Approved by: allanjude (mentor), imp (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D8487
The https://reviews.freebsd.org/rS308434 did change the return type for
dv_print callbacks, but the return type for beri_sdcard_disk_print()
was left unchanged, causing compile errors.
Reported by: cy
Reviewed by: brooks, rstone, allanjude
Approved by: allanjude (mentor)
Differential Revision: https://reviews.freebsd.org/D8515
Linux has a slightly different device tree definition for DPAA than originally
done in the FreeBSD driver. This changes the driver to be mostly compatible
with the Linux device tree definitions. Currently the differences are:
bman-portals: compatible = "fsl,bman-portals" (Linux is "simple-bus")
qman-portals: compatible = "fsl,qman-portals" (Linux is "simple-bus")
fman: compatible = "fsl,fman" (Linux is "simple-bus")
The Linux device tree doesn't specify anything for rgmii in the mdio. This
change still requires the device tree to specify the phy-handle, and doesn't yet
support tbi.
/loader.rc) to specify a Forth file to read from the pkgfs tarball and
process by Ficl.
This allows for the tarball to do runtime things like load a
platform-specific FDT blob, among other things.
Reviewed by: imp
Approved by: sjg (mentor)
MFC after: 2 weeks
Sponsored by: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D8494
Always define boot.netif.server in kenv in pxeboot
Add "boot.tftproot.server" to kenv when pxeboot uses tftpfs
Change the code order when setting env for TFTP or NFS to be the same as
common/dev_net.c
Reported by: tsoome
This change does modify devsw dv_print() to return the int value,
enabling walkers to interrupt the walk on non zero value from dv_print().
This will allow the pager_print actually to stop displaying data on
user input, and additionally pager is used in various *dev_print callbacks,
where it was missing.
For test, lsdev [-v] command should display data by screenfuls and should
stop when the key 'q' is pressed on pager prompt.
Reviewed by: allanjude
Approved by: allanjude (mentor)
Differential Revision: https://reviews.freebsd.org/D5461
lsdev should display detailed information about net devices only with -v
switch. This will make EFI and BIOS version of the loader to have the
same behavior.
Reviewed by: bapt, imp
Approved by: imp (mentor)
Differential Revision: https://reviews.freebsd.org/D8415
first EFI device if we can't find the one from which the image was loaded.
Reviewed by: allanjude,imp,jhb
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D6780
(gpt)zfsboot will read one-time boot directives from a special ZFS pool
area. The area was previously described as "Boot Block Header", but
currently it is know as Pad2, marked as reserved and is zeroed out on
pool creation. The new code interprets data in this area, if any, using
the same format as boot.config. The area is immediately wiped out.
Failure to parse the directives results in a reboot right after the
cleanup. Otherwise the boot sequence proceeds as usual.
zfsbootcfg writes zfsboot arguments specified on its command line to the
Pad2 area of a disk identified by vfs.zfs.boot.primary_pool and
vfs.zfs.boot.primary_vdev kenv variables that are set by loader during
boot. Please see the manual page for more.
Thanks to all who reviewed, contributed and made suggestions! There are
many potential improvements to the feature, please see the review for
details.
Reviewed by: wblock (docs)
Discussed with: jhb, tsoome
MFC after: 3 weeks
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D7612
FICL definitions not in ficl/ficl32 files broke this generally. This
makes that stuff conditional on BOOT_FORTH. Also, move definitions
related to the architecture (FICL_CPUARCH and friends) into
Makefile.ficl that all parts of the tree that include files with ficl
need to include (but only if MK_FORTH == yes). In addition, had to fix
library ordering issue with LIBSTAND to keep it last. Without boot
forth, there's no references to memset to bring in memset.o from
libstand.a to satisfy libgeliboot.a's use of it. Listing libstand last
solves this issue (and it's the proper place for libstand to boot).
* On arm64 we need to use the ${MACHINE_CPUARCH} subdirectory.
* env.c is only needed when using forth so only build it there.
Sponsored by: ABT Systems Ltd
