vfsopt and the vfs_buildopts function public, and add some new fields
to struct vfsopt (pos and seen), and new functions vfs_getopt_pos and
vfs_opterror.
Further extend the interface to allow reading options from the kernel
in addition to sending them to the kernel, with vfs_setopt and related
functions.
While this allows the "name=value" option interface to be used for more
than just FS mounts (planned use is for jails), it retains the current
"vfsopt" name and <sys/mount.h> requirement.
Approved by: bz (mentor)
as a handler.
The variable was exported only for debugging, but there is little reason
to do it now that the timekeeping is supported by various other variables.
For the time being just comment out the sysctl, but I think this
should go away.
of sysctl_variables.
I would also remove it from the VNET record but I am unsure if
there is any ABI issue -- so for the time being just mark it as
unused in ip_fw.h, and then we will collect the garbage at some
appropriate time in the future.
MFC after: 3 days
operation is known and to retry or fail accordingly to that
outcome. This fixes the problem with namespace traversing
programs failing with random ENOENT errors if someone just
happened to try to unmount that same filesystem at the same
time.
Reported by: dhw
Reviewed by: kib, attilio
Sponsored by: Juniper Networks, Inc.
This addresses interrupt storms that were noticed after enabling MSI
in drm. I think this is due to a loose interpretation of the PCI 2.3
spec, which states that a function using MSI is prohibitted from using
INTx. It appears that some vendors interpretted that to mean that they
should handle it in hardware, while others felt it was the drivers
responsibility.
This fix will also likely resolve interrupt storm related issues with
devices other than drm.
Reviewed by: jhb@
MFC after: 3 days
memory from int to size_t. Implement a workaround for current ABI not
allowing to properly save size for and report more then 2Gb sized segment
of shared memory.
This makes it possible to use > 2 Gb shared memory segments on 64bit
architectures. Please note the new BUGS section in shmctl(2) and
UPDATING note for limitations of this temporal solution.
Reviewed by: csjp
Tested by: Nikolay Dzham <i levsha org ua>
MFC after: 2 weeks
name i2c-address instead of reg. Change the OFW I2C probe to check both
locations for the address.
Submitted by: Marco Trillo
Reported by: Justin Hibbits
contrib/openbsm (svn merge) and src/sys/{bsm,security/audit} (manual
merge).
OpenBSM history for imported revision below for reference.
MFC after: 1 month
Sponsored by: Apple, Inc.
Obtained from: TrustedBSD Project
OpenBSM 1.1 beta 1
- The filesz parameter in audit_control(5) now accepts suffixes: 'B' for
Bytes, 'K' for Kilobytes, 'M' for Megabytes, and 'G' for Gigabytes.
For legacy support no suffix defaults to bytes.
- Audit trail log expiration support added. It is configured in
audit_control(5) with the expire-after parameter. If there is no
expire-after parameter in audit_control(5), the default, then the audit
trail files are not expired and removed. See audit_control(5) for
more information.
- Change defaults in audit_control: warn at 5% rather than 20% free for audit
partitions, rotate automatically at 2mb, and set the default policy to
cnt,argv rather than cnt so that execve(2) arguments are captured if
AUE_EXECVE events are audited. These may provide more usable defaults for
many users.
- Use au_domain_to_bsm(3) and au_socket_type_to_bsm(3) to convert
au_to_socket_ex(3) arguments to BSM format.
- Fix error encoding AUT_IPC_PERM tokens.
changes since the last imported OpenBSM release:
OpenBSM 1.1 beta 1
- The filesz parameter in audit_control(5) now accepts suffixes: 'B' for
Bytes, 'K' for Kilobytes, 'M' for Megabytes, and 'G' for Gigabytes.
For legacy support no suffix defaults to bytes.
- Audit trail log expiration support added. It is configured in
audit_control(5) with the expire-after parameter. If there is no
expire-after parameter in audit_control(5), the default, then the audit
trail files are not expired and removed. See audit_control(5) for
more information.
- Change defaults in audit_control: warn at 5% rather than 20% free for audit
partitions, rotate automatically at 2mb, and set the default policy to
cnt,argv rather than cnt so that execve(2) arguments are captured if
AUE_EXECVE events are audited. These may provide more usable defaults for
many users.
- Use au_domain_to_bsm(3) and au_socket_type_to_bsm(3) to convert
au_to_socket_ex(3) arguments to BSM format.
- Fix error encoding AUT_IPC_PERM tokens.
Obtained from: TrustedBSD Project
Sponsored by: Apple Inc.
ready status. Most of controllers managed to issue coommand and set BUSY
bit almost simultaneously, before we will read it, but at least JMicron JMB363
don't. Ignore timeout errors to keep old behavior when error there was
impossible.
For me this fixes timeout errors on the first command after channel attach
or reinit. Boot in my case is not affected, as there is much time passing
between reset and next command giving reset time to complete.
Unlike GCC, LLVM defines __STDC_VERSION__ to 199901L by default. This
means `restrict' keywords in files end up being given to lint, which
results in errors during compilation of usr.bin/xlint.
Other keywords are also expanded to nothing when using lint, so do the
same with restrict.
done in other places. Until we have no support for command queueing we have
no any benefit from FBS, while enabling it only here somehow leads to
"port not ready" errors on Intel 63XXESB2 controller.
Tested by: Larry Rosenman <ler AT lerctr.org>
pointers together, move padding to the bottom of the structure, and add
two new integer spares due to attrition over time. Remove unused spare
"flags" field, we can use one of the spare ints if we need it later.
This change requires a rebuild of device driver modules that depend on
the layout of ifnet for binary compatibility reasons.
Discussed with: kmacy
which are not in a module of their own like gif.
Single kernel compiles and universe will fail if the size of the struct
changes. Th expected values are given in sys/vimage.h.
See the comments where how to handle this.
Requested by: peter
architecture to implement size-guards on the vimage vnet_* structures.
As CTASSERT_EQUAL() needs special compile time options we back it
by CTASSERT() in the default case. Unfortunately CTASSERT() triggers
first, thus add an option to allow compilation with CTASSERT_EQUAL() only.
See the comments how to get new values if you trigger the assert
and what to do in that case.
Reviewed by: rwatson, zec (earlier versions)
It's better to just use internal language constructs, because it is
likely the compiler has a better opinion on whether to perform inlining,
which is very likely to happen to struct winsize.
Submitted by: Christoph Mallon <christoph mallon gmx de>
It takes a positive integer constant (the expected value) and
another positive integer, usually compile-time evaluated,
e.g. CTASSERT_EQUAL(FOO_EXPECTED_SIZE, sizeof (struct foo));
While the classic CTASSERT() gives:
error: size of array '__assert60' is negative
this gives you:
In function '__ctassert_equal_at_line_60':
warning: '__expected_42_but_got[464ul]' is used uninitialized in this function
and you can directly see the difference in the expected and the
real value.
CTASSERT_EQUAL() needs special compile time options to trigger
thus keep it locally to this header. If it proves to be of general
interest it can be moved to systm.h.
Submitted by: jmallett
Reviewed by: sam, warner, rwatson, jmallett (earlier versions)
* Add RB_FOREACH_FROM() which continues traversal *at*
the y-node provided. There is no pre-increment.
* Nuke RB_FOREACH_SAFE as it was buggy; it would omit the final node.
* Replace RB_FOREACH_SAFE() with a working implementation
derived from RB_FOREACH_FROM().
The key observation is that we now only check the loop-control
variable, but still cache the next member pointer.
* Add RB_FOREACH_REVERSE_FROM() which continues backwards
traversal *at* the y-node provided. There is no pre-increment.
Typically this is used to back out of allocations made
whilst walking an RB-tree.
* Add RB_FOREACH_REVERSE_SAFE() which performs insertion and
deletion safe backwards traversal.
and partially r188903. Revert breaks new drives detection on reinit to the
state as it was before me, but fixes series of new bugs reported by some
people.
Unconditional queueing of ata_completed() calls can lead to deadlock if
due to timeout ata_reinit() was called at the same thread by previous
ata_completed(). Calling of ata_identify() on ata_reinit() in current
implementation opens numerous races and deadlocks.
Problems I was touching here are still exist and should be addresed, but
probably in different way.
When copying big structures, LLVM generates calls to memmove(), because
it may not be able to figure out whether structures overlap. This caused
linker errors to occur. memmove() is now implemented using bcopy().
Ideally it would be the other way around, but that can be solved in the
future. On ARM we don't do add anything, because it already has
memmove().
Discussed on: arch@
Reviewed by: rdivacky
drivers' probe routines. It allows not to sleep and so not drop Giant inside
ata_identify() critical section and so avoid crash if it reentered on
request timeout. Reentering of probe call checked inside of it.
Give device own knowledge about it's type (ata/atapi/atapicam). It is not
a good idea to ask channel status for device type inside ata_getparam().
Add softc memory deallocation on device destruction.
On FreeBSD, this is the default behaviour. According to the spec, we may
give this flag a value of zero, but I'd rather not do this. If we define
it to a non-zero value, we can always change default behaviour without
changing the ABI. This is very unlikely to happen, though.
wcscasecmp(), and wcsncasecmp().
- Make some previously non-standard extensions visible
if POSIX_VISIBLE >= 200809.
- Use restrict qualifiers in stpcpy().
- Declare off_t and size_t in stdio.h.
- Bump __FreeBSD_version in case the new symbols (particularly
getline()) cause issues with ports.
Reviewed by: standards@
at irq install/uninstall time, but when we vt switch, we uninstall the
irq handler. When the irq handler is reinstalled, the modeset ioctl
happens first. The modeset ioctl is supposed to tell us that we can
disable vblank interrupts if there are no active consumers. This will
fail after a vt switch until another modeset ioctl is called via dpms
or xrandr. Leading to cases where either interrupts are on and can't
be disabled, or worse, no interrupts at all.
MFC after: 2 weeks
usb stack rather than with the rest of the processor support code.
Not sure that's a good idea, as we were moving away from it, but this
fixes the build in the mean time so we can have that discussion.
- Fix the copy, we can't do a blind copy but must transfer
the data from the old to the new.
- Fix the ACK processing so we properly stop retransmitting
the thing.
- Fix it so if we get a retran we will properly reply with
the saved response without doing anything.
MFC after: 1 month
