Bootloaders for powerpc are not built as position independent
code. Since bsd.prog.mk is used for building, when PIE is enabled,
the PIE flags are added and that causes the build to fail.
Adding MK_PIE=no stops bsd.prog.mk from adding PIE specific flags.
Submitted by: Dawid Gorecki <dgr@semihalf.com>
Reviewed by: emaste
Obtained from: Semihalf
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D28893
When performing buildworld for MIPS with PIE enabled, the build fails
with "position-independent code requires '-mabicalls'" message.
-mno-abicalls and -fno-pic flags are explicitly set in MIPS ubldr
makefile, so to work around this problem, set MK_PIE=no for MIPS
ubldr.
Submitted by: Dawid Gorecki <dgr@semihalf.com>
Reviewed by: emaste
Obtained from: Semihalf
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D28370
Check whether we have reached the end of the buffer using search_size
instead of MULTIBOOT_SEARCH, which is the maximum defined by the
specification, but the file can be shorter than that.
This prevents printing a harmless error message when loading a file
that is smaller than MULTIBOOT_SEARCH.
Sponsored by: Citrix Systems R&D
MFC after: 3 days
Fixes: adda2797eb ('stand/multiboot2: add support for booting a Xen dom0 in UEFI mode')
Add a missing space in one error message.
Sponsored by: Citrix Systems R&D
MFC after: 3 days
Fixes: adda2797eb ('stand/multiboot2: add support for booting a Xen dom0 in UEFI mode')
If we start with console set to comconsole, the local
console (vidconsole, efi) is never initialized and attempt to
use the data can render the loader hung.
Reported by: Kamigishi Rei
MFC after: 3 days
Notable upstream changes:
778869fa1 Fix reporting of mount progress
e7adccf7f Disable use of hardware crypto offload drivers on FreeBSD
03e02e5b5 Fix checksum errors not being counted on repeated repair
64e0fe14f Restore FreeBSD resource usage accounting
11f2e9a49 Fix panic if scrubbing after removing a slog device
MFC after: 2 weeks
Do not attempt to add MODINFOMD_MODULEP to the kernel medatada on
arches that don't have it defined.
This fixes the build for arches different than amd64 after
7d3259775c.
Sponsored by: Citrix Systems R&D
Reported by: lwhsu, arichardson
Add some basic multiboot2 infrastructure to the EFI loader in order to
be capable of booting a FreeBSD/Xen dom0 when booted from UEFI.
Only a very limited subset of the multiboot2 protocol is implemented
in order to support enough to boot into Xen, the implementation
doesn't intend to be a full multiboot2 capable implementation.
Such multiboot2 functionality is hooked up into the amd64 EFI loader,
which is the only architecture that supports Xen dom0 on FreeBSD.
The options to boot a FreeBSD/Xen dom0 system are exactly the same as
on BIOS, and requires setting the xen_kernel and xen_cmdline options
in loader.conf.
Sponsored by: Citrix Systems R&D
Reviewed by: tsoome, imp
Differential revision: https://reviews.freebsd.org/D28497
This mirrors the functionality of the BIOS amd64 bi_load function,
that stashes the absolute address of the module metadata. This is
required for booting as a Xen dom0 that does relocate the modulep and
the loaded modules, and thus requires adjusting the offset.
No functional change introduced, further patches will make use of this
functionality for Xen dom0 loading.
Sponsored by: Citrix Systems R&D
Reviewed by: imp
Differential revision: https://reviews.freebsd.org/D28496
Xen requires that UEFI BootServices are enabled in order to boot, so
introduce a new parameter to bi_load in order to select whether BS
should be exited.
No functional change introduced in this patch, as all current users of
bi_load request BS to be exited. Further changes will make use of this
functionality.
Note the memory map is still appended to the kernel metadata, even
when it could be modified by further calls to the Boot Services, as it
will be used to detect if the kernel has been booted from UEFI.
Sponsored by: Citrix Systems R&D
Reviewed by: tsoome, imp
Differential revision: https://reviews.freebsd.org/D28495
While I was there:
- Fix some typos
- Fix an excessive argument "indent" reported by mandoc -Tlint
- Replace a dead link with the one suggested by
https://www.uefi.org/uefi
Submitted by: linimon (in part)
Reviewed by: bcr
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D27774
We use ascii box chars with serial console because we do not know
if terminal can draw unixode box chars. Same problem is about userboot
console.
MFC after: 5 days
The VT screen buffer size is calculated based on our default
built in (8x16) font.
With high-resolution display, we want to use at least 8x16 font,
or we will have large unused areas on screen.
MFC after: 1 week
BORDER_PIXELS is left over from picking up the source from illumos
port. Since FreeBSD VT does not use border in terminal size
calculation, there is no reason why should loader use it.
MFC after: 1 week
Conout does contian the default output device name.
ConOutDev does contain all possible output device names, so we can
use it as fallback, when there is no ConOut.
PR: 253253
All callers of bi_load64 pass 0 as the addr parameter, so just remove
it and always calculate the last load address from the module chain.
No functional change.
Sponsored by: Citrix Systems R&D
Reviewed by: tsoome, imp
Differential revision: https://reviews.freebsd.org/D28412
According to the Lua 5.4 manual section 6.4.1 ("Patterns"), the interaction
between ranges and classes is not defined and hyphens must be specified at
either the beginning or the end of a set if they are not escaped.
Move all such occurrences to the beginning.
Reported-by: _parv (twitter)
MFC-after: 3 days
This eliminates a lot of stat() calls that happen when lualoader renders the
menu with the default settings, and greatly speeds up rendering on my
laptop.
ftype is nil if loader/loader.efi hasn't been updated yet, falling back to
lfs.attributes() to test.
This is technically incompatible with lfs, but not in a particularly
terrible way.
Reviewed-by: cem
MFC-after: 4 days
Differential Revision: https://reviews.freebsd.org/D27542
There's a currently ad-hoc protocol to hand off the FreeBSD kernel
payload between the loader and the kernel itself when Xen is in the
middle of the picture. Such protocol wasn't very resilient to changes
to the loader itself, because it relied on moving metadata around to
package it using a certain layout. This has proven to be fragile, so
replace it with a more robust version.
The new protocol requires using a xen_header structure that will be
used to pass data between the FreeBSD loader and the FreeBSD kernel
when booting in dom0 mode. At the moment the only data conveyed is the
offset of the start of the module metadata relative to the start of the
module itself.
This is a slightly disruptive change since it also requires a change
to the kernel which is contained in this patch. In order to update
with this change the kernel must be updated before updating the
loader, as described in the handbook. Note this is only required when
booting a FreeBSD/Xen dom0. This change doesn't affect the normal
FreeBSD boot protocol.
This fixes booting FreeBSD/Xen in dom0 mode after
3630506b9d.
Sponsored by: Citrix Systems R&D
MFC after: 3 days
Reviewed by: tsoome
Differential Revision: https://reviews.freebsd.org/D28411
This is all code only run on ARMv4 and ARMv5. Support for these have
been dropped from FreeBSD.
Differential Revision: https://reviews.freebsd.org/D28314
While loading kernel, we check if vt/vbe backend support is included in
kernel and set the tg_kernel_supported flag in gfx_state. unload
command needs to reset this flag to allow next load to perform
this check with new kernel.
Reported by: jhb
On i386, after 6c7a932d0b, the vbefb vt
driver was no longer detected by the loader, if any kernel module was
loaded after the kernel itself.
This was caused by the parse_vt_drv_set() function being called multiple
times, resetting the detection flag. (It was called multiple times,
becuase i386 .ko files are shared objects like the kernel proper, while
this is not the case on amd64.)
Fix this by skipping the set_vt_drv_set lookup if vbefb was already
detected.
Reviewed by: tsoome
efi, like the various ${MACHINE} directories, should have a dependency on
the enabled interpreters.
The general rule here is that any top-level directory that has a program at
any depth within that includes loader.mk should add ${INTERP_DEPENDS} added
to its dependencies so that the appropriate ficl/lua bits are ready before
they begin.
Note that the only directories in-tree that require it but will not get it
in a more appropriate manner are i386 (on amd64), efi, and userboot. i386
and userboot are handled explicitly in Makefile.amd64 where they are added
to S.yes.
Reported-by: bcran
MFC-after: 3 days
lualoader was previously not processing \ as escapes; this commit fixes
that and does better error checking on the value as well.
Additionally, loader.conf had some odd restrictions on values that make
little sense. Previously, lines like:
kernel=foo
Would simply be discarded with a malformed line complaint you might not
see unless you disable beastie.
lualoader tries to process these as well as it can and manipulates the
environment, while forthloader did minimal processing and constructed a
`set` command to do the heavy lifting instead. The lua approach was
re-envisioned from building a `set` command so that we can appropriately
reset the environment when, for example, boot environments change.
Lift the previous restrictions to allow unquoted values on the right hand
side of an expression. Note that an unquoted value is effectively:
[A-Za-z0-9-][A-Za-z0-9-_.]*
This commit also stops trying to weirdly limit what it can handle in a
quoted value. Previously it only allowed spaces, alphanumeric, and
punctuation, which is kind of weird. Change it here to grab as much as it
can between two sets of quotes, then let processEnvVar() do the needful and
complain if it finds something malformed looking.
My extremely sophisticated test suite is as follows:
<<EOF
X_01_simple_string="simple"
X_02_escaped_string="s\imple"
X_03_unquoted_val=3
X_04_unquoted_strval=simple_test
X_05_subval="${X_03_unquoted_val}"
X_06_escaped_subval="\${X_03_unquoted_val}"
X_07_embedded="truth${X_03_unquoted_val}"
X_08_escaped_embedded="truth\${X_03_unquoted_val}"
X_09_unknown="${unknown_val}"
X_10_unknown_embedded="truth${unknown_val}"
X_11_crunchy="crunch$unknown_val crunch"
X_12_crunchy="crunch${unknown_val}crunch"
Y_01_badquote="te"lol"
Y_02_eolesc="lol\"
Y_02_noteolesc="lol\\"
Y_03_eolvar="lol$"
Y_03_noteolvar="lol\$"
Y_04_badvar="lol${"
exec="echo Done!"
EOF
Future work may provide a stub loader module in userland so that we can
formally test the loader scripts rather than sketchy setups like the above
in conjunction with the lua-* tools in ^/tools/boot.
There is no need to keep multiple copies of the relocation code. The
amd64 code works on arm64 with a few small changes to relocation types.
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D28213
Handle malloc failures in vbe_init().
If it should so happen and we do get malloc failure in vbe_init(),
use original mode list.
Replace nitems with nentries to have naming consistency and avoid
confusion with nitems() macro.
Reported by: yuripv, rpokala
Even if it didn't behave well previously this is fixed.
Tested on: OrangePi One (armv7 u-boot) (serial only and serial + HDMI)
Tested on: Pine64-LTS (aarch64 u-boot) (serial only and serial + HDMI)
Tested on: Honeycomb (aarch64 EDK2) (serial only)
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D28153
Some systems may provide multiple GOP instances and not all are
bound to hardware. The current loader is picking up the first GOP,
which may not be usable. Instead we load the GOP handle array,
and test every handle to have registered ConOut protocol. If ConOut is
present, we can use this GOP handle to open GOP protocol.
This fixes the positioning of the "Welcome to FreeBSD" heading, which was
misplaced after the recent update to Lua 5.4. The issue was previously
masked by a compatibility knob in Lua 5.3 that would cause float-tagged
numbers to render faithfully without the decimal component. Lua 5.4 dropped
that and ensures that it always prints a decimal component, even if it has
to append a ".0" to the value.
Standard division produces a "float", floor division (//) can be used to
guarantee an integer. Floating point operations have been completely ripped
out of the liblua compiled for the bootloader, so this is a nop. This is
decidedly better than trying to hack out the float tag entirely.
Reported-by: mjg, probably others
MFC-after: 3 days
Caller is not interested in symlinks follow them.
Throw an error if too many links encountered.
Reviewed by: stevek
Sponsored by: Juniper Networks
--This line, and those below, will be ignored--
> Description of fields to fill in above: 76 columns --|
> PR: If a GNATS PR is affected by the change.
> Differential Revision: https://reviews.freebsd.org/D### (*full* phabric URL needed).
> Submitted by: If someone else sent in the change.
> Reviewed by: If someone else reviewed your modification.
> Approved by: If you needed approval for this commit.
> Obtained from: If the change is from a third party.
> MFC after: N [day[s]|week[s]|month[s]]. Request a reminder email.
> MFH: Ports tree branch name. Request approval for merge.
> Relnotes: Set to 'yes' for mention in release notes.
> Security: Vulnerability reference (one per line) or description.
> Sponsored by: If the change was sponsored by an organization.
> Empty fields above will be automatically removed.
Change-Id: I4ef92ff256f503c620dc5bba79ed93b32cb2330d
We do select font based on desired terminal size, we do query
UEFI terminal size with conout->QueryMode(), but by mistake, the fallback
values are used.
Pass gfx_state to efi_find_framebuffer(), so we can pick between
GOP and UGA in efi_find_framebuffer(), also we can then
set up struct gen_fb in gfx_state from efifb and isolate efi fb data
processing into framebuffer.c.
This change does allow us to clean up efi_cons_init() and reduce
BS->LocateProtocol() calls.
A little downside is that we now need to translate gen_fb back to
efifb in bootinfo.c (for passing to kernel), and we need to add few
-I options to CFLAGS.
