11417 Commits

Author SHA1 Message Date
Lukas Ertl
d0834d4dc8 Add Intel PCI vendor ID. 2004-05-22 14:18:05 +00:00
Yaroslav Tykhiy
2d8c4e44b2 Don't forget to reset if_hwassist back to 0 when hardware checksumming
is being turned off, or else TCP/IP will keep assigning the job to us.

Drivers themselves should consult if_capenable, not if_hwassist--the
latter is for the TCP/IP stack.
2004-05-22 13:59:17 +00:00
Maxime Henrion
d8a821e8cf Get rid of a lockmgr consumer by making agp(4) use a standard mutex,
since it's always acquiring the lock exclusively.  This was tested
with X on an SMP box, with and without WITNESS.
2004-05-22 13:06:38 +00:00
Lukas Ertl
b2d36e0f30 Fix typos in comments.
Submitted by:   Gerhard Gonter <gonter@falbala.wu-wien.ac.at>
2004-05-22 09:29:52 +00:00
Marius Strobl
55fe3a872f Spelling and style fixes.
Obtained from:	NetBSD
2004-05-22 01:56:18 +00:00
Maxime Henrion
27d8bee2a7 Plug three lock leaks. 2004-05-22 00:44:08 +00:00
Yaroslav Tykhiy
5fe9116b72 Cosmetic:
Set capability bits in a consistent way.
Add a comment on why the VLAN_MTU stuff comes after ether_ifattach().
2004-05-21 20:34:04 +00:00
Warner Losh
c5b82061f4 Fix cutNpasto in last commit. 2004-05-21 19:47:55 +00:00
Yaroslav Tykhiy
21ce2bf290 The driver fxp(4) has reception of large frames enabled hardcodedly,
so let VLAN_MTU be marked in if_capenable from the beginning.
2004-05-21 18:11:38 +00:00
Yaroslav Tykhiy
7560265c18 Mark the capability of this driver to receive VLAN frames >1500 bytes
as initially active in if_capenable since it is always on.

Reviewed by:	simokawa
2004-05-21 17:11:34 +00:00
Warner Losh
d776e1167f ifdef writing to registers that the base pci standard says are
read-only on D3->D0 power state transition.  Add a define to enable
them, but include a comment to contact me if there's a problem.
2004-05-21 14:41:02 +00:00
Doug Rabson
95a2495411 Fix spelling. 2004-05-21 09:12:07 +00:00
Warner Losh
17249aab6e Compeletely rewrite the description of hw.pci.do_powerstate to sound
better.
2004-05-21 07:06:54 +00:00
Warner Losh
4c04937d5b Improve the English somewhat.
Prodded by: ru@
2004-05-21 07:03:07 +00:00
Warner Losh
cd677980a1 Ooops, forgot to commit the updated definition for hw.pci.do_powerstate
when I committed code that changed its meaning.
2004-05-21 06:43:46 +00:00
Warner Losh
b17653cf41 MFp4:
Split the baby.  For idepci devices, now both legacy mode bits need
not be set.  We can run an idepci in a split mode.  However, it only
works better than before, not works.  It works better in that when one
device is legacy and the other isn't and disabled, we now operate
correctly.

sos submitted a version of this patch.
2004-05-21 06:41:15 +00:00
Warner Losh
ae8b157fbf Move pci_do_powerstate up a level. Now it just means 'do not turn devices
off into d3 state when there's no driver for the device'.  This should
help suspend/resume in the default case.
2004-05-21 06:39:09 +00:00
Warner Losh
e5af1ba884 MFp4: o save/restore subvendor, subdevice, vendor, device, baseclass,
subclass, progif and revid.  While these are typically read
	only fields, they aren't always read-only.  progif is writable
	for ata devices, for example.  It does no harm when they are
	read only, and helps when they aren't.
2004-05-21 06:36:36 +00:00
Warner Losh
2a6c850c09 When attaching pccard and cardbus children, there's no need to set the
device == NULL on failure.  A warning should suffice.

# I wrote this back before I understood the unattached but loosely bound
# newbus concept...
2004-05-21 06:11:47 +00:00
Warner Losh
2a829b00f4 Now that we have the resource allocation code in current, the kludge
to try to allocate things on my parent can be taken out.  It duplicates code.

Also, add comment about why the power state stuff is here (type 2
devices don't participate in the power state save/restore due to
larger Bx issues).
2004-05-21 06:10:13 +00:00
Warner Losh
d53b25544c make the pci power state and resource code a lot less chatty. The
chattiness was left in for debugging, but now that nearly all of the
problems relating to the changes have been fixed, it is only annoying.  It
is still available via bootverbose.

Prodded by: jhb
2004-05-21 06:03:26 +00:00
MIHIRA Sanpei Yoshiro
c970d559f1 Sync to 1.178 of usbdevs 2004-05-21 01:39:38 +00:00
MIHIRA Sanpei Yoshiro
3ee4bca213 add support Kyocera AH-K3001V (cellular phone in Japan)
PR:		kern/66779
Submitted by:	Togawa Satoshi <toga@puyo.org>
MFC after:	1 week
2004-05-21 01:36:48 +00:00
Dag-Erling Smørgrav
76b108abfe Whitespace cleanup. 2004-05-20 14:49:12 +00:00
Yaroslav Tykhiy
1df1a82541 Stylistic changes around the previous commit:
- since the number of supported capabilities is growing,
  set bits in if_cap* in a consistent way;

- unexpand(1) leading SPACE characters.
2004-05-20 11:04:09 +00:00
Yaroslav Tykhiy
388305aceb Set the VLAN bits in if_capenable as well as in if_capabilities
because VLAN hardware features are enabled in em(4) by default.

Note: Currently vlan(4) has a bug that it consults
if_capabilities, not if_capenable.  This will be fixed
after all the network drivers set VLAN bits in
if_capenable properly.
2004-05-20 10:57:33 +00:00
Scott Long
7cb88a352e Update from vendor. This also adds support for newer management tools.
Submitted by:	Achim Leubner
2004-05-19 17:46:34 +00:00
Eric Anholt
f4078c527f Add explicit list of SiS AGP chipsets based on Linux kernel's list.
Prompted by:	i386/59503
2004-05-19 05:25:31 +00:00
Warner Losh
092d0b6b38 Replace the lame big endian crc with wpaul's standard big endian crc
algorithm, supplied by wpaul himself.  The lame one has an origin
that's been called into question, so rather than argue about that (one
could make an excellent fair use argument), replace it with better
code since that's what FreeBSD is about.

Submitted by: wpaul[1], Klaus Klein

[1] Bill called this a silly bikeshed.  Maybe his is not incorrect.
2004-05-19 02:16:46 +00:00
Nate Lawson
14e2b11f18 Use the simpler __BUS_ACCESSOR macros for ivars instead of defining them
ourselves.
2004-05-18 16:53:29 +00:00
Pawel Jakub Dawidek
6a40892929 Fix panic which occurs when given sector size for memory-backed device
is less than DEV_BSIZE (512) bytes.

Reported by:	Mike Bristow <mike@urgle.com>
Approved by:	phk
2004-05-18 07:30:04 +00:00
Joerg Wunsch
b3dd2b7bfc Fix various style(9) bugs. This includes the removal of wrong
reimplementations of enodev() (for the smbread() and smbwrite()
functions), as well as fixing various errno values to conform to
errno(3).

Bruce also points out that a number of the pointer == NULL tests
are probably nonsense because the respective checks are already
done at upper layers.

(Mostly) submitted by:	bde
2004-05-17 18:55:45 +00:00
Søren Schmidt
263b4cdea3 Rip out the too verbose "spurious interrupt" printf's, they dont serve
a purpose any longer.
2004-05-17 17:53:12 +00:00
Paul Saab
a891a3bf7c Turn SCSI pre-fetch ON. This is mainly for 64XX and 64X based
controllers and allows the controller to prefetch 1-2k on certain
PCI memory reads to the host.  The spec says this should only be
used for IA32 based systems.

Informed of feature by:	John Cagle <first.last@hp.com>
2004-05-17 17:27:38 +00:00
Vinod Kashyap
5bc4169411 Undid scottl's recent changes. 2004-05-17 17:16:58 +00:00
Roman Kurakin
b25d0ae0cb Add description of Cronyx Omega2-PCI (8x port serial adapter). 2004-05-17 12:57:30 +00:00
Warner Losh
734e3cc5fd Update to reflect new location in the tree. This has been repo copied
from sys/isa/fd.c in preparation for specialization of attachments for
different busses.
2004-05-17 05:42:04 +00:00
Peter Wemm
dbfcb6b2db Remove "register_t eflags; eflags = read_eflags();" because 1) it wasn't
subsequently used in the code, and 2) it doesn't compile on !i386.
2004-05-16 21:22:45 +00:00
Joerg Wunsch
69271da461 Another candidate that didn't use copyin/copyout for user<->kernel
transfers.

MFC after:	1 month
2004-05-16 21:19:59 +00:00
Joerg Wunsch
add37e1e86 You wouldn't believe a driver could survive doing userland IO without
properly using copyin/copyout for more than 5 years?  This one did. :-)

Properly encapsulate all user<->kernel data transfers using copy{in,out}.

MFC after:	1 month
2004-05-16 21:18:45 +00:00
Joerg Wunsch
c2d85eaa93 After successfully attaching an iicbus instance, instead of using a
NULL name in device_add_child(), explicitly name all of our known
child drivers in order to give them a chance to attach to us.
Otherwise, only the first one present would be probed and attached.

Reviewed by:	nsouch
MFC after:	1 month
2004-05-16 21:11:46 +00:00
Yoshihiro Takahashi
d385ba7313 - Initialize uart_bus_space_io and uart_bus_space_mem.
- Fix wrong comment.
2004-05-16 14:12:05 +00:00
Doug Rabson
c59285296e Don't use the node id as an index into the topology map. This breaks
if a node on the bus has more than three ports (like my cheapo six
port hub).
2004-05-16 11:26:39 +00:00
Scott Long
f3a537ca3f Remove twa_intrhook prototype.
Submitted by:	cperciva
2004-05-15 15:41:59 +00:00
Scott Long
e25b7fccd4 Set the cpi.hba_inquiry field to something useful. 2004-05-15 05:18:05 +00:00
Scott Long
bd4c922777 Remove the config_intrhook as it is not needed. 2004-05-15 05:17:42 +00:00
Dag-Erling Smørgrav
0f126ea09f Remove some debugging printf()s and a pointless device_set_desc() call. 2004-05-15 00:07:23 +00:00
MIHIRA Sanpei Yoshiro
e68f2db9a3 MFNetBSD (umodem.c 1.46):
URL updates
2004-05-14 15:16:09 +00:00
Nate Lawson
0025fb0f4f Add support for GPE being a package of { reference, gpe bit }.
Rework the ECDT probe to pass all the parameters in a temporary struct.
Note why we are mostly ok evaluating _GLK so early.
2004-05-14 04:17:56 +00:00
John Baldwin
92cb9c9b67 Different VIA host bridges use different offsets to their AGP config
registers, so add a register offset array to the softc.  We key off the
device ID to determine which set of register offsets.  Currently the 8385
host bridge used on amd64 is the only bridge to use the AGP3_VIA_*
register offsets and all other bridges use the AGP_VIA_* offsets.  It is
currently unclear if the AGP3_VIA_* offsets are for VIA bridges that
implement AGP 3.0 bridges or just for amd64 bridges.

Submitted by:	Kenneth Culver culverk at sweetdreamsracing dot biz
2004-05-13 20:05:42 +00:00