This was possible if a STANDALONE_SUBDIR_TARGET item came in
SUBDIR_TARGETS before 'all', which would then cause SUBDIR to
have all .WAIT's removed.
Sponsored by: Dell EMC Isilon
This fixes parallel build issues when trying to depend on ${SUBDIR}. An
example of this in share/i18n/csmapper/Makefile where mapper.dir depends
on ${SUBDIR} having been traversed and built already. Before this
change running make in that directory would build the subdirectories
twice. This led to obscure build races. While reworking that build
may be possible, the framework should not so easily allow creating such
problems.
Now depending on <directory> will properly redirect to the
all_subdir_<directory> target rather than invoking the inline shell.
This also makes 'make -jX <directory>' now respect any
SUBDIR_DEPEND_<directory> statements when SUBDIR_PARALLEL is defined.
This is not entirely intended and may be changed later.
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
This is part of an effort to cleanup handling of some edge cases
involving 'make <directory>'. It also provides the targets for
other uses.
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
This is unifying more of the logic. Rather than create targets such
as 'all: all_subdir_foo' when using SUBDIR_PARALLEL and using
'all: _SUBDIR' when not using SUBDIR_PARALLEL, always use the
expanded out <target>_subdir_<directory> pattern. When not using
SUBDIR_PARALLEL, have each directory-target depend on the previously
defined targets as to respect the *order* of SUBDIR.
Using 'make -N' now prints all directory traversals individually rather
than using a loop, since a loop is no longer used to traverse.
This is part of an effort to cleanup handling of some edge cases
involving 'make <directory>' and making it simpler in the sense
that the pattern used to build is the same for all modes.
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
This is mostly fixing META_MODE with realinstall wanting a .meta
file when it does not need one. These targets really should
always run though since they have _SUBDIR on them.
Approved by: re (implicit)
Sponsored by: EMC / Isilon Storage Division
for the CONFS issue with dma.conf and ppp.conf.
Thank you very much to Bryan Drewery for looking into the
problem and providing this fix.
Pointyhat: gjb
Sponsored by: The FreeBSD Foundation
No functional change.
This prevents adding empty targets to the main called target which is
confusing for debugging.
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
This allows 'make analyze' or 'make OBJ.clang-analyzer' to run the
Clang static analyzer and present results on stdout.
Obtained from: NetBSD (CVS Rev. 1.3)
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D5449
For example when building, from buildworld, lib/atf/libatf-c++/tests/detail:
--- all_subdir_atf ---
is now:
--- all_subdir_lib/atf/libatf-c++/tests/detail ---
Sponsored by: EMC / Isilon Storage Division
Replace `make regress` (legacy test make target) and `make test` (incomplete
test make target added with the FreeBSD test suite) with make check as it's
consistent with other open source projects.
`make check` defaults to running tests from `.OBJDIR`, but can be overridden
with the `CHECKDIR` variable.
Add `make checkworld` target to simplify running the FreeBSD test suite from
`TESTSBASE` (i.e. the top-level tests directory), similar to buildworld.
Document `make check` and `make checkworld` in build(7).
Other minor changes:
- Rename intermediate file (`Kyuafile.auto`) to `Kyuafile` to simplify
`make check`.
- Remove terse warnings attached to `beforetest`/`aftertest`.
- Add kyua binary check to check target in suite.test.mk; error out if it's
not found
The MFC is [partly] contingent on other build related changes being MFCed.
Differential Revision: https://reviews.freebsd.org/D4406
MFC after: 2 months
X-MFC to: stable/10
Relnotes: yes
Reviewed by: bdrewery, Evan Cramer <eccramer@gmail.com>
Sponsored by: EMC / Isilon Storage Division
This reworks r289254 and removes ALL_SUBDIR_TARGETS.
Because there is an include guard in this file there is no need for
LOCAL_ or ?= on SUBDIR_TARGETS or STANDALONE_SUBDIR_TARGETS. These can
just be set via src.conf. By the time bsd.subdir.mk is included it will
just append the values to the existing value and work fine. This allows
a consistent way to append to these variables without introducing a
LOCAL_ var for STANDALONE_SUBDIR_TARGETS or renaming the historical
SUBDIR_TARGETS.
Sponsored by: EMC / Isilon Storage Division
My changes in r291635 broke 'make install*' for DIRDEPS_BUILD but also
revealed that some other targets were not guaranteed to be created if
there was a SUBDIR defined. One example is 'installfiles' was never
defined if SUBDIR was not empty.
Sponsored by: EMC / Isilon Storage Division
The problem was that 'afterinstall' was not coming after SUBDIRs were
installed which was the expectation at least in sys/modules for kldxref.
Reported by: np
Pointyhat to: bdrewery
Sponsored by: EMC / Isilon Storage Division
This is to fix 'make all' causing it to recurse on both 'all' and 'buildconfig'
due to 'buildconfig' being in ALL_SUBDIR_TARGETS and being a dependency of
'all'.
This now adds all of the '*includes', '*files' targets as subdir targets,
allowing them to recurse.
This also removes the need for some 'realinstall' hacks in bsd.subdir.mk since
it no longer recurses; only 'install' will recurse and call the proper
'beforeinstall', 'realinstall', and 'afterinstall' in each sub-directory.
This fixes 'make includes' and 'make files' to not be a rerolled ${MAKE}
sub-shell but to rather just recurse on 'inclues' and 'files'. This avoids
various issues such as the one fixed in r289462. As such revert Makefile.inc1
back to using 'includes' which avoids an extra tree walk and parallelizes
the includes phases better.
Makefile.inc1 includes a guard so that 'make all' will not use SUBDIR_PARALLEL,
added in r289438. This is so users do not get a probably broken build if they
run 'make all' from the top-level. Before the change in this commit, the
workaround for 'make everything' was 'par-all' which would depend on 'all' and
cause a proper parallel recursion. Now that will not work so a new
_PARALLEL_SUBUDIR_OK is used to allow it.
This is still part of an effort to combine bsd.(files|incs|confs).mk and move
some of its logic out of bsd.subdir.mk, as attempted in r289282 and reverted in
r289331. This commit fixes the problems found there which was mostly double
recursing during 'includes' which would recurse on itself and 'buildincludes'
and 'installincludes', all in parallel. The logic is still in bsd.subdir.mk
for now.
I've been cautious about this commit but have experienced no breakage on the
tree except for the 'par-all' case which was already a hack. If something foo
is depending on something bar that should recurse, it is very likely that the
foo target is being recursed on already meaning that bar will still effectively
recurse once sub-directories call foo.
Discussed on: arch@
MFC after: never
Sponsored by: EMC / Isilon Storage Division
This is to fix 'make all' causing it to recurse on both 'all' and 'buildconfig'
due to 'buildconfig' being in ALL_SUBDIR_TARGETS and being a dependency of
'all'.
This now adds all of the '*includes', '*files' targets as subdir targets,
allowing them to recurse.
This also removes the need for some 'realinstall' hacks in bsd.subdir.mk since
it no longer recurses; only 'install' will recurse and call the proper
'beforeinstall', 'realinstall', and 'afterinstall' in each sub-directory.
This fixes 'make includes' and 'make files' to not be a rerolled ${MAKE}
sub-shell but to rather just recurse on 'inclues' and 'files'. This avoids
various issues such as the one fixed in r289462. As such revert Makefile.inc1
back to using 'includes' which avoids an extra tree walk and parallelizes
the includes phases better.
Makefile.inc1 includes a guard so that 'make all' will not use SUBDIR_PARALLEL,
added in r289438. This is so users do not get a probably broken build if they
run 'make all' from the top-level. Before the change in this commit, the
workaround for 'make everything' was 'par-all' which would depend on 'all' and
cause a proper parallel recursion. Now that will not work so a new
_PARALLEL_SUBUDIR_OK is used to allow it.
This is still part of an effort to combine bsd.(files|incs|confs).mk and move
some of its logic out of bsd.subdir.mk, as attempted in r289282 and reverted in
r289331. This commit fixes the problems found there which was mostly double
recursing during 'includes' which would recurse on itself and 'buildincludes'
and 'installincludes', all in parallel. The logic is still in bsd.subdir.mk
for now.
I've been cautious about this commit but have experienced no breakage on the
tree except for the 'par-all' case which was already a hack. If something foo
is depending on something bar that should recurse, it is very likely that the
foo target is being recursed on already meaning that bar will still effectively
recurse once sub-directories call foo.
Discussed on: arch@
MFC after: never
Sponsored by: EMC / Isilon Storage Division
This allows META_FILES option to be renamed META_MODE.
Also add META_COOKIE_TOUCH for use in targets that can benefit
from a cookie when in meta mode.
Differential Revision: https://reviews.freebsd.org/D4153
Reviewed by: bdrewery
Using .USEBEFORE had the unintended side-effect of changing the directory for
the real target ran in the current directory. For example this meant that
the 'make clean' would run in one of the SUBDIR.
Sponsored by: EMC / Isilon Storage Division
Pointyhat to: bdrewery
- Rather than allow 'make clean*' to ignore dependencies, make a static
list of targets in STANDALONE_SUBDIR_TARGETS that are known to be safe.
This allows a user to override them if needed and avoids adding this feature
to user-defined targets that are in ${SUBDIR_TARGETS}. [1]
- This now also allows to force SUBDIR_PARALLEL when calling these
targets, since no dependencies are needed.
Reported by: ian [1]
Sponsored by: EMC / Isilon Storage Division
MFC after: 3 weeks
X-MFC-With: r289778
This reverts r266473 as the need for it, working around .MAKE and '+'
issues, is no longer needed after r289460. This avoids extra log
output in -j builds of '-- _sub.TARGET --' that are redundant with the
'-- TARGET --' and '-- TARGET_subdir_DIR --' entries already showing.
r266473 also made a subtle change in the ordering of _SUBDIR handling. Before
the change, SUBDIRS were recursed into after building the TARGET due to the
.USE of _SUBDIR *appending* the commands onto the TARGET. After the change
though the indirection caused TARGET to depend on _sub.TARGET which had the
_SUBDIR handling in it. This TARGET would run after recursing. However, the
SUBDIR_PARALLEL handling from r263778 has this ordering as well. Since
this has so far not been a problem, for now make this behavior for
non-SUBDIR_PARALLEL use of _SUBDIR explicit by using .USEBEFORE.
Further research may change this back to .USE as well as the
SUBDIR_PARALLEL handling and bsd.progs.mk recursing.
Sponsored by: EMC / Isilon Storage Division
The 'config' target isn't really needed right now so just remove it to avoid
any clashes with config(8) building. It's also likely misspelled and should
be 'configs' if we decide to add it back. This was just a convenience
target recently added.
Sponsored by: EMC / Isilon Storage Division
more typical ALL_SUBDIR_TARGETS entries and target hooks in bsd.incs.mk,
bsd.files.mk and bsd.confs.mk.
This allows the targets to be NOPs if unneeded and still work with the
shortcut 'make includes' to build and then install in a parallel-safe manner.
Sort and re-indent the ALL_SUBDIR_TARGETS with the new entries.
Sponsored by: EMC / Isilon Storage Division
Also improve documentation.
The SUBDIR_TARGETS variable should really be named LOCAL_SUBDIR_TARGETS, but
renaming it may be a surprise for downstream vendors who use this variable.
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
Before this, the target was unknown. Now it will recurse on subdirs and run
the target in the current directory. It is required to recurse as there
may be subdirs that have objs in their directory or in the object directory,
so it is not enough to just delete the objdir of the subdir parent.
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
When bmake was initially imported at r241298 shell commands were no longer
ran with 'set -e' as they were before. This was fixed in r254980 so they
again always use 'set -e'.
Sponsored by: EMC / Isilon Storage Division
remove duplicates. We cannot sort SUBDIR because many Makefiles
have .WAIT in the list which is strongly ordering. Rather than
try to second guess when to sort and when to not sort depending
on .WAIT being in the list, just remove duplicates.
