Commit Graph

1250 Commits

Author SHA1 Message Date
KATO Takenori
a80a8d7271 Sync with sys/i386/conf/Makefile.i386 revision 1.124. 1998-09-22 16:11:08 +00:00
Mike Smith
26dd997fbe New major for 3dfx driver. 1998-09-21 22:04:07 +00:00
Bruce Evans
5b036e2b3c Fixed missing dependencies of genassym.o, gensetdefs.o and vers.o
on opt_global.h.  This actually matters for genassym.o (it depends
on at least SMP).

Don't undefine KERNEL for compiling genassym.c.  genassym.o really
depends on KERNEL, and the prototype mismatches that required
undefining KERNEL in rev.1.49 no longer exist.

Compile gensetdefs* with the same flags as genassym*.  External
`gen' programs such linux_genassym should also use these flags
(${GEN_CFLAGS}).

Fixed missing dependency generation for gensetdefs.o.  C sources
for external `gen' programs should be added to GEN_CFILES to get
their dependencies generated.

Cleaned up flags definitions and use.  All of ${CFLAGS} is now
passed to mkdep and the assembler (both are actually variants of
${CC} and will ignore the irrelevant flags).
1998-09-21 06:39:11 +00:00
Bruce Evans
641fc5df83 Clean aicasm's lex and yacc generated source files. 1998-09-21 04:41:11 +00:00
Nicolas Souchu
58bcaed08c vpo now compiles with CAM, #!CAM# removed. 1998-09-20 17:15:25 +00:00
KATO Takenori
47d002cf75 Sync with sys/i386/conf/files.i386 revision 1.205. 1998-09-20 10:50:18 +00:00
Justin T. Gibbs
3e82ad76da Re-enable the advansys driver. 1998-09-20 07:20:19 +00:00
Bruce Evans
9547f2c6d9 Remove unused file. It was missing about half the necessary entries. 1998-09-20 06:23:58 +00:00
Bruce Evans
3a049d0356 Removed entries for dead SLICE files.
Removed commented out entries for dead networking files (netccitt etc.).
Uncommented entries for zombie networking files (netns).
1998-09-20 06:17:49 +00:00
Bruce Evans
35b47c4228 Remove vestiges of SLICE code.
Forgotten by:	sos
1998-09-20 06:04:56 +00:00
Jordan K. Hubbard
534484343b Note that we're in BETA status. 1998-09-19 11:45:37 +00:00
Eivind Eklund
7c0daaa801 Make LINT compile and link again after the CAM merge. The little
annoying #!CAM# indicators are used to be clear, in the expectation
that the places they show will be either fixed or diked out reasonably
quickly.

Reviewed by:	ken
1998-09-18 20:17:41 +00:00
Doug Rabson
c6f34b8987 Change version number. 1998-09-18 18:41:49 +00:00
Matt Jacob
3dd37e4387 (requested by gibbs) Remove the SCSI_CAM option (and rework the isp driver
that had depended on it for compilation within or without CAM to use
__FreeBSD_version instead).
1998-09-18 00:46:42 +00:00
Kenneth D. Merry
5623443753 Move SCSI_DELAY and SCSI_CAM from the undocumented options section to the
CAM options section.

Document that SCSI_DELAY is in milliseconds, not seconds.

Tell users that SCSI_CAM is only needed if you've got the QLogic driver in
your kernel.

Reviewed by:	gibbs
1998-09-18 00:01:39 +00:00
Nicolas Souchu
f7d09fba58 vpo comments updated for cam, nlpt suggested instead of lpt 1998-09-17 21:54:17 +00:00
Doug Rabson
9604f809cd Merge with the latest i386 syscons. 1998-09-17 09:38:36 +00:00
Mike Smith
c009fe307d Mark the syscons and pcvt drivers as being allowed to conflict, so that
well-meaning but uneducated users don't exterminate the psm driver in
their zeal to achieve zero conflicts.
1998-09-17 03:15:30 +00:00
KATO Takenori
12629290f5 Sync with sys/i386/isa/files.i386 and options.i386 revisions 1.204 and
1.87, respectively.
1998-09-16 08:37:40 +00:00
Doug Rabson
657d6e769c Change to cam. 1998-09-16 08:22:09 +00:00
KATO Takenori
6b47fe275c Sync with sys/i386/conf/Makefile.i386 revision 1.123. 1998-09-16 08:04:40 +00:00
Justin T. Gibbs
79dadba22a Bump config version. 1998-09-15 21:07:07 +00:00
Søren Schmidt
a8445737e7 Add VESA support to syscons.
Kazu writes:

The VESA support code requires vm86 support. Make sure your kernel
configuration file has the following line.
        options "VM86"
If you want to statically link the VESA support code to the kernel,
add the following option to the kernel configuration file.
        options "VESA"

The vidcontrol command now accepts the following video mode names:
VESA_132x25, VESA_132x43, VESA_132x50, VESA_132x60, VESA_800x600

The VESA_800x600 mode is a raster display mode. The 80x25 text will
be displayed on the 800x600 screen. Useful for some laptop computers.

vidcontrol accepts the new `-i <info>' option, where <info> must be
either `adapter' or `mode'.  When the `-i adapter' option is given,
vidcontrol will print basic information (not much) on the video
adapter. When the `-i mode' option is specified, vidcontrol will
list video modes which are actually supported by the video adapter.

Submitted by:   Kazutaka YOKOTA yokota@FreeBSD.ORG
1998-09-15 18:16:39 +00:00
KATO Takenori
81083f630d Sync with sys/i386/conf/GENERIC, SMP-GENERIC, device.i386, files.i386,
majors.i386 and options.i386 revisions 1.116, 1.13, 1.14, 1.203, 1.49
and 1.86, respectively.
1998-09-15 14:10:56 +00:00
Poul-Henning Kamp
3f8c45065e (this is an extract from src/share/examples/atm/README)
===================================
                HARP  |  Host ATM Research Platform
                ===================================

                              HARP 3

What is this stuff?
-------------------
The Advanced Networking Group (ANG) at the Minnesota Supercomputer Center,
Inc. (MSCI), as part of its work on the MAGIC Gigabit Testbed, developed
the Host ATM Research Platform (HARP) software, which allows IP hosts to
communicate over ATM networks using standard protocols.  It is intended to
be a high-quality platform for IP/ATM research.

HARP provides a way for IP hosts to connect to ATM networks.  It supports
standard methods of communication using IP over ATM.  A host's standard IP
software sends and receives datagrams via a HARP ATM interface.  HARP provides
functionality similar to (and typically replaces) vendor-provided ATM device
driver software.

HARP includes full source code, making it possible for researchers to
experiment with different approaches to running IP over ATM.  HARP is
self-contained; it requires no other licenses or commercial software packages.

HARP implements support for the IETF Classical IP model for using IP over ATM
networks, including:

   o IETF ATMARP address resolution client
   o IETF ATMARP address resolution server
   o IETF SCSP/ATMARP server
   o UNI 3.1 and 3.0 signalling protocols
   o Fore Systems's SPANS signalling protocol

What's supported
----------------
The following are supported by HARP 3:

   o ATM Host Interfaces
        - FORE Systems, Inc. SBA-200 and SBA-200E ATM SBus Adapters
        - FORE Systems, Inc. PCA-200E ATM PCI Adapters
        - Efficient Networks, Inc. ENI-155p ATM PCI Adapters

   o ATM Signalling Protocols
        - The ATM Forum UNI 3.1 signalling protocol
        - The ATM Forum UNI 3.0 signalling protocol
        - The ATM Forum ILMI address registration
        - FORE Systems's proprietary SPANS signalling protocol
        - Permanent Virtual Channels (PVCs)

   o IETF "Classical IP and ARP over ATM" model
        - RFC 1483, "Multiprotocol Encapsulation over ATM Adaptation Layer 5"
        - RFC 1577, "Classical IP and ARP over ATM"
        - RFC 1626, "Default IP MTU for use over ATM AAL5"
        - RFC 1755, "ATM Signaling Support for IP over ATM"
        - RFC 2225, "Classical IP and ARP over ATM"
        - RFC 2334, "Server Cache Synchronization Protocol (SCSP)"
        - Internet Draft draft-ietf-ion-scsp-atmarp-00.txt,
                "A Distributed ATMARP Service Using SCSP"

   o ATM Sockets interface
        - The file atm-sockets.txt contains further information

What's not supported
--------------------
The following major features of the above list are not currently supported:

        o UNI point-to-multipoint support
        o Driver support for Traffic Control/Quality of Service
        o SPANS multicast and MPP support
        o SPANS signalling using Efficient adapters

This software was developed under the sponsorship of the Defense Advanced
Research Projects Agency (DARPA).

Reviewed (lightly) by:	phk
Submitted by:	Network Computing Services, Inc.
1998-09-15 11:44:44 +00:00
Justin T. Gibbs
700daf5ea0 sd->da, od is gone, no SCSI control devices.
new pass, xpt, and targ devices.

Nuke no longer used AHC options.
1998-09-15 10:01:14 +00:00
Justin T. Gibbs
bf21c6337f Update for CAM. 1998-09-15 09:59:15 +00:00
KATO Takenori
c17091756f Sync with sys/i386/confMakefile.i386 revision 1.122. 1998-09-15 03:49:43 +00:00
Søren Schmidt
d024c95599 Remove the SLICE code.
This clearly needs alot more thought, and we dont need this to hunt
us down in 3.0-RELEASE.
1998-09-14 19:56:42 +00:00
Jordan K. Hubbard
ac80870e0b Decouple genassym flags from CFLAGS.
Submitted by:	jhay
1998-09-14 11:32:17 +00:00
John Polstra
22d4b0fb41 Add provisions for variant core dump file formats, depending on the
object format of the executable being dumped.  This is the first
step toward producing ELF core dumps in the proper format.  I will
commit the code to generate the ELF core dumps Real Soon Now.  In
the meantime, ELF executables won't dump core at all.  That is
probably no less useful than dumping a.out-style core dumps as they
have done until now.

Submitted by:	Alex <garbanzo@hooked.net> (with very minor changes by me)
1998-09-14 05:36:51 +00:00
Nicolas Souchu
15cc1109dc add immio.c for ZIP+ support 1998-09-13 18:24:38 +00:00
Robert V. Baron
d3459488ae Finish conversion of cfs -> coda 1998-09-13 13:57:59 +00:00
Robert V. Baron
9afcea2f4a All the references to cfs, in symbols, structs, and strings
have been changed to coda.  (Same for CFS.)
1998-09-11 18:50:17 +00:00
Søren Schmidt
6773d00e66 Oops missed a line in the previous commit 1998-09-10 11:23:08 +00:00
Søren Schmidt
a9c5b8d027 Update info on the bt848 driver.
Submitted by: Roger Hardiman <roger@cs.strath.ac.uk>
1998-09-10 08:20:46 +00:00
Nicolas Souchu
acd5ae9acc Major numbers allocated for generic SMB/I2C i/o 1998-09-09 18:57:59 +00:00
Warner Losh
e8ddcfd6a1 Add dependency for subr_bus.c on bus_if.h and device_if.h so that a make
depend is not required to just build the kernel.

Reviewed by: Doug Rabson
1998-09-09 17:23:25 +00:00
KATO Takenori
2663a4af57 Sync with sys/i386/conf/files.i386 revision 1.202. 1998-09-09 14:39:56 +00:00
KATO Takenori
c792da10e3 Sync with sys/i386/conf/options.i386 revision 1.85. 1998-09-09 14:39:20 +00:00
Bruce Evans
405b59bcb5 Turned on -Wformat -fformat-extensions. -fformat-extensions requires a
-current version of gcc.  Without it, -Wformat would complain about all
the nonstandard %[Dbrz] formats in the kernel.
1998-09-09 10:04:58 +00:00
Justin T. Gibbs
e79363ba53 Reserve character major 104 for the CAM Transport Layer Services device. 1998-09-09 03:07:02 +00:00
Søren Schmidt
eeded4d82e Add new atapi-cd driver that supports atapi CD-R/RW drives.
This is only a stop-gab solution to get atapi burner support into 3.0.
1998-09-08 20:57:47 +00:00
Brian Somers
8aa2558802 Make PCIC_RESUME_RESET an proper option.
My laptop (a CTX Cybernote) needs this.  It claims to have a

  PC-Card VLSI 82C146 (5 mem & 2 I/O windows)
1998-09-08 18:09:51 +00:00
Doug Rabson
feb6634586 Device framework code now declared in MI code. 1998-09-07 07:29:30 +00:00
KATO Takenori
2bfe25d193 Sync with sys/i386/conf/files.i386 revision 1.201. 1998-09-05 02:36:18 +00:00
KATO Takenori
0e28be212a Sync with sys/i386/conf/Makefile.i386 revision 1.121. 1998-09-05 02:35:21 +00:00
Nicolas Souchu
f25c58e005 pcf.c added, support for the Philips PCF8584 I2C bus controller
(this is part of the iicbus system)
1998-09-04 06:06:55 +00:00
Nicolas Souchu
d41c96ee24 Reviewed by: Doug Rabson
Submitted by:	nsouch
I2C and SMB files added + new bus arch. files description
1998-09-03 21:10:54 +00:00
Nicolas Souchu
8afa373cc6 Reviewed by: Doug Rabson
Submitted by:	nsouch
Adding I2C and SMB entries to LINT, CONFIGVERS modified in Makefile.i386
1998-09-03 20:58:34 +00:00