Create libdl.so.1 as a filter for libc.so.7 which exports public dl*
functions. The functions are resolved from the rtld instead, the goal
of creating library is to avoid errors from the static linker due to
missed libdl. For static binaries, an empty .o is compiled into
libdl.a so that static binaries still get dl stubs from libc.a.
Right now lld cannot create filter objects, disable libdl on arm64
when binutils are not used.
Reviewed by: bdrewery, dim (previos version); emaste
Exp run: PR 220525, done by antoine
Sponsored by: The FreeBSD Foundation
MFC after: 1 month
Differential revision: https://reviews.freebsd.org/D11504
LIBADD is only supported for in-tree builds because we do not install
share/mk/src.libnames.mk (which provides LIBADD support) into /usr/share/mk.
So if a partial checkout is done then the LIBADDs are ignored and no LDADD is
ever added.
Provide limited support for this case for when LIBADD is composed entirely of
base libraries. This is to avoid clashes with ports and other out-of-tree
LIBADD uses that should not be mapped to LDADD and because we do not want to
support LIBADD out-of-tree right now.
Reported by: mckusick, kib
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
Since buildenv exports SYSROOT all of these uses will now look in
WORLDTMP by default.
sys/boot/efi/loader/Makefile
A LIBSTAND hack is no longer required for buildenv.
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
This fixes these cases which would rebuild every time:
make[6]: /usr/obj/usr/src/libexec/rtld-elf/tests/libpythagoras/.depend, 1: ignoring stale .depend for /usr/obj/usr/src/tmp/usr/tests/libexec/rtld-elf/libm.a
make[6]: /usr/obj/usr/src/lib/libxo/tests/encoder/.depend, 1: ignoring stale .depend for /usr/obj/usr/src/tmp/usr/tests/lib/libxo/libxo.a
make[7]: /usr/obj/usr/src/lib/libthr/tests/dlopen/dso/.depend, 1: ignoring stale .depend for /usr/obj/usr/src/tmp/usr/tests/lib/libthr/dlopen/libpthread.a
The problem is that some Makefiles will override LIBDIR to where they want
their library to install. bsd.libnames.mk will then use ${LIBDIR} to define
where *existing* libraries are. This then leads to looking for the
libraries in the *target* place rather than the *expected* place.
We may want to expand this (and all of the other *DIR variables in bsd.own.mk)
into something like what Ports has, a PREFIX and a LOCALBASE. PREFIX being
where things are being installed to and LOCALBASE being where they already are.
For now store the default expected LIBDIR into LIBDIR_BASE and use that for
library locations.
Reported by: sbruno
MFC after: 1 week
Sponsored by: Dell EMC Isilon
the same API as the GPL'd version of this library. It implements the common
Linux API for programatically manipulating UEFI environment varibales using
the UEFI Runtime Services the kernel provides. It replaces the old efi
library since it is programmed to a different interface, but retails the
CHAR16 to UTF-8 and vice versa conversion routines. The new name is to match
Linux program's expectations.
Differential Revision: https://reviews.freebsd.org/D8128
Reviewed by: kib@, wblock@, Ganael Laplanche
this library. Sticking to 'libifconfig' (and 'ifconfig_' as function prefix)
should reduce chances of namespace collisions, make it more clear what the
library does, and be more in line with existing libraries.
Submitted by: Marie Helene Kvello-Aune <marieheleneka@gmail.com>
Differential Revision: https://reviews.freebsd.org/D7742
Reviewed by: cem, kp
libifc (pronounced lib-ifconfig) aims to be a light abstraction layer between
programs and the kernel APIs for managing the network configuration.
This should hopefully make programs easier to maintain, and reduce code
duplication.
Work will begin on making ifconfig(8) use this library in the near future.
This code is still evolving. The interface should not be considered stable until
it is announced as such.
Submitted By: Marie Helene Kvello-Aune <marieheleneka@gmail.com>
Reviewed By: kp
Differential Revision: https://reviews.freebsd.org/D7529
Add zfsd, which deals with hard drive faults in ZFS pools. It manages
hotspares and replements in drive slots that publish physical paths.
cddl/usr.sbin/zfsd
Add zfsd(8) and its unit tests
cddl/usr.sbin/Makefile
Add zfsd to the build
lib/libdevdctl
A C++ library that helps devd clients process events
lib/Makefile
share/mk/bsd.libnames.mk
share/mk/src.libnames.mk
Add libdevdctl to the build. It's a private library, unusable by
out-of-tree software.
etc/defaults/rc.conf
By default, set zfsd_enable to NO
etc/mtree/BSD.include.dist
Add a directory for libdevdctl's include files
etc/mtree/BSD.tests.dist
Add a directory for zfsd's unit tests
etc/mtree/BSD.var.dist
Add /var/db/zfsd/cases, where zfsd stores case files while it's shut
down.
etc/rc.d/Makefile
etc/rc.d/zfsd
Add zfsd's rc script
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev.c
Fix the resource.fs.zfs.statechange message. It had a number of
problems:
It was only being emitted on a transition to the HEALTHY state.
That made it impossible for zfsd to take actions based on drives
getting sicker.
It compared the new state to vdev_prevstate, which is the state that
the vdev had the last time it was opened. That doesn't make sense,
because a vdev can change state multiple times without being
reopened.
vdev_set_state contains logic that will change the device's new
state based on various conditions. However, the statechange event
was being posted _before_ that logic took effect. Now it's being
posted after.
Submitted by: gibbs, asomers, mav, allanjude
Reviewed by: mav, delphij
Relnotes: yes
Sponsored by: Spectra Logic Corp, iX Systems
Differential Revision: https://reviews.freebsd.org/D6564
After calling the cap_init(3) function Casper will fork from it's original
process, using pdfork(2). Forking from a process has a lot of advantages:
1. We have the same cwd as the original process.
2. The same uid, gid and groups.
3. The same MAC labels.
4. The same descriptor table.
5. The same routing table.
6. The same umask.
7. The same cpuset(1).
From now services are also in form of libraries.
We also removed libcapsicum at all and converts existing program using Casper
to new architecture.
Discussed with: pjd, jonathan, ed, drysdale@google.com, emaste
Partially reviewed by: drysdale@google.com, bdrewery
Approved by: pjd (mentor)
Differential Revision: https://reviews.freebsd.org/D4277
system call information such as system call arguments. Initially this
will consist of pulling duplicated code out of truss and kdump though it
may prove useful for other utilities in the future.
This commit moves the shared utrace(2) record parser out of kdump into
the library and updates kdump and truss to use it. One difference from
the previous version is that the library version treats unknown events
that start with the "RTLD" signature as unknown events. This simplifies
the interface and allows the consumer to decide how to handle all
non-recognized events. Instead, this function only generates a string
description for known malloc() and RTLD records.
Reviewed by: bdrewery
Differential Revision: https://reviews.freebsd.org/D4537
Fix current findings, which should fix cases of NO_SHARED not building
properly.
Given libfoo:
- Ensure that a LIBFOO is set. For INTERNALLIBS advise setting this in
src.libnames.mk, otherwise bsd.libnames.mk.
- Ensure that a LIBFOODIR is properly set.
- Ensure that _DP_foo is set and matches the LIBADD in the build of foo's own
Makefile
Sponsored by: EMC / Isilon Storage Division
Fix current findings.
Given libfoo:
- Ensure that a LIBFOO is set. For INTERNALLIBS advise setting this in
src.libnames.mk, otherwise bsd.libnames.mk.
- Ensure that a LIBFOODIR is properly set.
- Ensure that _DP_foo is set and matches the LIBADD in the build of foo's own
Makefile
Sponsored by: EMC / Isilon Storage Division
This is going to be used to allow DIRDEPS to be bootstrapped off of
LIBADD/DPADD. It currently works for internal libraries which have a
DIR defined for them but also use the .a library from a src-mapped obj
directory. It can also be useful for using -L without a --sysroot per
LIBADD to use the OBJDIR version of the libraries.
I didn't review every LIBADD, so it is possible this is missing some.
Sponsored by: EMC / Isilon Storage Division
The primary focus of these changes is to modernize FreeBSD's
tape infrastructure so that we can take advantage of some of the
features of modern tape drives and allow support for LTFS.
Significant changes and new features include:
o sa(4) driver status and parameter information is now exported via an
XML structure. This will allow for changes and improvements later
on that will not break userland applications. The old MTIOCGET
status ioctl remains, so applications using the existing interface
will not break.
o 'mt status' now reports drive-reported tape position information
as well as the previously available calculated tape position
information. These numbers will be different at times, because
the drive-reported block numbers are relative to BOP (Beginning
of Partition), but the block numbers calculated previously via
sa(4) (and still provided) are relative to the last filemark.
Both numbers are now provided. 'mt status' now also shows the
drive INQUIRY information, serial number and any position flags
(BOP, EOT, etc.) provided with the tape position information.
'mt status -v' adds information on the maximum possible I/O size,
and the underlying values used to calculate it.
o The extra sa(4) /dev entries (/dev/saN.[0-3]) have been removed.
The extra devices were originally added as place holders for
density-specific device nodes. Some OSes (NetBSD, NetApp's OnTap
and Solaris) have had device nodes that, when you write to them,
will automatically select a given density for particular tape drives.
This is a convenient way of switching densities, but it was never
implemented in FreeBSD. Only the device nodes were there, and that
sometimes confused users.
For modern tape devices, the density is generally not selectable
(e.g. with LTO) or defaults to the highest availble density when
the tape is rewritten from BOT (e.g. TS11X0). So, for most users,
density selection won't be necessary. If they do need to select
the density, it is easy enough to use 'mt density' to change it.
o Protection information is now supported. This is either a
Reed-Solomon CRC or CRC32 that is included at the end of each block
read and written. On write, the tape drive verifies the CRC, and
on read, the tape drive provides a CRC for the userland application
to verify.
o New, extensible tape driver parameter get/set interface.
o Density reporting information. For drives that support it,
'mt getdensity' will show detailed information on what formats the
tape drive supports, and what formats the tape drive supports.
o Some mt(1) functionality moved into a new mt(3) library so that
external applications can reuse the code.
o The new mt(3) library includes helper routines to aid in parsing
the XML output of the sa(4) driver, and build a tree of driver
metadata.
o Support for the MTLOAD (load a tape in the drive) and MTWEOFI
(write filemark immediate) ioctls needed by IBM's LTFS
implementation.
o Improve device departure behavior for the sa(4) driver. The previous
implementation led to hangs when the device was open.
o This has been tested on the following types of drives:
IBM TS1150
IBM TS1140
IBM LTO-6
IBM LTO-5
HP LTO-2
Seagate DDS-4
Quantum DLT-4000
Exabyte 8505
Sony DDS-2
contrib/groff/tmac/doc-syms,
share/mk/bsd.libnames.mk,
lib/Makefile,
Add libmt.
lib/libmt/Makefile,
lib/libmt/mt.3,
lib/libmt/mtlib.c,
lib/libmt/mtlib.h,
New mt(3) library that contains functions moved from mt(1) and
new functions needed to interact with the updated sa(4) driver.
This includes XML parser helper functions that application writers
can use when writing code to query tape parameters.
rescue/rescue/Makefile:
Add -lmt to CRUNCH_LIBS.
src/share/man/man4/mtio.4
Clarify this man page a bit, and since it contains what is
essentially the mtio.h header file, add new ioctls and structure
definitions from mtio.h.
src/share/man/man4/sa.4
Update BUGS and maintainer section.
sys/cam/scsi/scsi_all.c,
sys/cam/scsi/scsi_all.h:
Add SCSI SECURITY PROTOCOL IN/OUT CDB definitions and CDB building
functions.
sys/cam/scsi/scsi_sa.c
sys/cam/scsi/scsi_sa.h
Many tape driver changes, largely outlined above.
Increase the sa(4) driver read/write timeout from 4 to 32
minutes. This is based on the recommended values for IBM LTO
5/6 drives. This may also avoid timeouts for other tape
hardware that can take a long time to do retries and error
recovery. Longer term, a better way to handle this is to ask
the drive for recommended timeout values using the REPORT
SUPPORTED OPCODES command. Modern IBM and Oracle tape drives
at least support that command, and it would allow for more
accurate timeout values.
Add XML status generation. This is done with a series of
macros to eliminate as much duplicate code as possible. The
new XML-based status values are reported through the new
MTIOCEXTGET ioctl.
Add XML driver parameter reporting, using the new MTIOCPARAMGET
ioctl.
Add a new driver parameter setting interface, using the new
MTIOCPARAMSET and MTIOCSETLIST ioctls.
Add a new MTIOCRBLIM ioctl to get block limits information.
Add CCB/CDB building routines scsi_locate_16, scsi_locate_10,
and scsi_read_position_10().
scsi_locate_10 implements the LOCATE command, as does the
existing scsi_set_position() command. It just supports
additional arguments and features. If/when we figure out a
good way to provide backward compatibility for older
applications using the old function API, we can just revamp
scsi_set_position(). The same goes for
scsi_read_position_10() and the existing scsi_read_position()
function.
Revamp sasetpos() to take the new mtlocate structure as an
argument. It now will use either scsi_locate_10() or
scsi_locate_16(), depending upon the arguments the user
supplies. As before, once we change position we don't have a
clear idea of what the current logical position of the tape
drive is.
For tape drives that support long form position data, we
read the current position and store that for later reporting
after changing the position. This should help applications
like Bacula speed tape access under FreeBSD once they are
modified to support the new ioctls.
Add a new quirk, SA_QUIRK_NO_LONG_POS, that is set for all
drives that report SCSI-2 or older, as well as drives that
report an Illegal Request type error for READ POSITION with
the long format. So we should automatically detect drives
that don't support the long form and stop asking for it after
an initial try.
Add a partition number to the sa(4) softc.
Improve device departure handling. The previous implementation
led to hangs when the device was open.
If an application had the sa(4) driver open, and attempted to
close it after it went away, the cam_periph_release() call in
saclose() would cause the periph to get destroyed because that
was the last reference to it. Because destroy_dev() was
called from the sa(4) driver's cleanup routine (sacleanup()),
and would block waiting for the close to happen, a deadlock
would result.
So instead of calling destroy_dev() from the cleanup routine,
call destroy_dev_sched_cb() from saoninvalidate() and wait for
the callback.
Acquire a reference for devfs in saregister(), and release it
in the new sadevgonecb() routine when all devfs devices for
the particular sa(4) driver instance are gone.
Add a new function, sasetupdev(), to centralize setting
per-instance devfs device parameters instead of repeating the
code in saregister().
Add an open count to the softc, so we know how many
peripheral driver references are a result of open
sessions.
Add the D_TRACKCLOSE flag to the cdevsw flags so
that we get a 1:1 mapping of open to close calls
instead of a N:1 mapping.
This should be a no-op for everything except the
control device, since we don't allow more than one
open on non-control devices.
However, since we do allow multiple opens on the
control device, the combination of the open count
and the D_TRACKCLOSE flag should result in an
accurate peripheral driver reference count, and an
accurate open count.
The accurate open count allows us to release all
peripheral driver references that are the result
of open contexts once we get the callback from devfs.
sys/sys/mtio.h:
Add a number of new mt(4) ioctls and the requisite data
structures. None of the existing interfaces been removed
or changed.
This includes definitions for the following new ioctls:
MTIOCRBLIM /* get block limits */
MTIOCEXTLOCATE /* seek to position */
MTIOCEXTGET /* get tape status */
MTIOCPARAMGET /* get tape params */
MTIOCPARAMSET /* set tape params */
MTIOCSETLIST /* set N params */
usr.bin/mt/Makefile:
mt(1) now depends on libmt, libsbuf and libbsdxml.
usr.bin/mt/mt.1:
Document new mt(1) features and subcommands.
usr.bin/mt/mt.c:
Implement support for mt(1) subcommands that need to
use getopt(3) for their arguments.
Implement a new 'mt status' command to replace the old
'mt status' command. The old status command has been
renamed 'ostatus'.
The new status function uses the MTIOCEXTGET ioctl, and
therefore parses the XML data to determine drive status.
The -x argument to 'mt status' allows the user to dump out
the raw XML reported by the kernel.
The new status display is mostly the same as the old status
display, except that it doesn't print the redundant density
mode information, and it does print the current partition
number and position flags.
Add a new command, 'mt locate', that will supersede the
old 'mt setspos' and 'mt sethpos' commands. 'mt locate'
implements all of the functionality of the MTIOCEXTLOCATE
ioctl, and allows the user to change the logical position
of the tape drive in a number of ways. (Partition,
block number, file number, set mark number, end of data.)
The immediate bit and the explicit address bits are
implemented, but not documented in the man page.
Add a new 'mt weofi' command to use the new MTWEOFI ioctl.
This allows the user to ask the drive to write a filemark
without waiting around for the operation to complete.
Add a new 'mt getdensity' command that gets the XML-based
tape drive density report from the sa(4) driver and displays
it. This uses the SCSI REPORT DENSITY SUPPORT command
to get comprehensive information from the tape drive about
what formats it is able to read and write.
Add a new 'mt protect' command that allows getting and setting
tape drive protection information. The protection information
is a CRC tacked on to the end of every read/write from and to
the tape drive.
Sponsored by: Spectra Logic
MFC after: 1 month
allows the user to request administrative changes to individual devices
such as attach or detaching drivers or disabling and re-enabling devices.
- Add a new /dev/devctl2 character device which uses ioctls for device
requests. The ioctls use a common 'struct devreq' which is somewhat
similar to 'struct ifreq'.
- The ioctls identify the device to operate on via a string. This
string can either by the device's name, or it can be a bus-specific
address. (For unattached devices, a bus address is the only way to
locate a device.) Bus drivers register an eventhandler to claim
unrecognized device names that the driver recognizes as a valid address.
Two buses currently support addresses: ACPI recognizes any device
in the ACPI namespace via its full path starting with "\" and
the PCI bus driver recognizes an address specification of
'pci[<domain>:]<bus>:<slot>:<func>' (identical to the PCI selector
strings supported by pciconf).
- To make it easier to cut and paste, change the PnP location string
in the PCI bus driver to output a full PCI selector string rather
than 'slot=<slot> function=<func>'.
- Add a devctl(3) interface in libdevctl which provides a wrapper around
the ioctls and is the preferred interface for other userland code.
- Add a devctl(8) program which is a simple wrapper around the requests
supported by devctl(3).
- Add a device_is_suspended() function to check DF_SUSPENDED.
- Add a resource_unset_value() function that can be used to remove a
hint from the kernel environment. This is used to clear a
hint.<driver>.<unit>.disabled hint when re-enabling a boot-time
disabled device.
Reviewed by: imp (parts)
Requested by: imp (changing PCI location string)
Relnotes: yes
This is a thin wrapper around the kernel interface which should make
it easier to write GPIO applications. gpioctl(8) will be converted to
use this library in a separate commit.
Differential Revision: https://reviews.freebsd.org/D1183
Reviewed by: adrian, loos
Discussed on: arm@, embedded@
Relnotes: yes
Add LIBSSP_NONSHARED to bsd.libnames.mk and append LIBSSP_NONSHARED to DPADD in
lib/libc when MK_SSP != no
Approved by: rpaulo (mentor)
MFC after: 3 days
Phabric: D675 (as part of a larger diff)
PR: 192728
Make sure everything linking to a privatelib and/or an internallib does it directly
from the OBJDIR rather than DESTDIR.
Add src.libnames.mk so bsd.libnames.mk is not polluted by libraries not existsing
in final installation
Introduce the LD* variable which is what ld(1) is expecting (via LDADD) to link to
internal/privatelib
Directly link to the .so in case of private library to avoid having to complexify
LDFLAGS.
Phabric: https://phabric.freebsd.org/D553
Reviewed by: imp, emaste
statically linked into consumers (GDB and variants) in the base
system, and the shared library is no longer installed.
That also allows ports to be able to use a modern version of readline
PR: 162948
Reviewed by: emaste
We should not be leaking these interfaces to the outside world given
that it's much easier for third-party components to use the devel/atf
package from ports.
As a side-effect, we can also drop the ATF pkgconfig and aclocal files
from the base system. Nothing in the base system needs these, and it
was quite ugly to have to get them installed only so that a few ports
could build. The offending ports have been fixed to depend on
devel/atf explicitly.
Reviewed by: bapt
IPX was a network transport protocol in Novell's NetWare network operating
system from late 80s and then 90s. The NetWare itself switched to TCP/IP
as default transport in 1998. Later, in this century the Novell Open
Enterprise Server became successor of Novell NetWare. The last release
that claimed to still support IPX was OES 2 in 2007. Routing equipment
vendors (e.g. Cisco) discontinued support for IPX in 2011.
Thus, IPX won't be supported in FreeBSD 11.0-RELEASE.
UCL is heavily infused by nginx configuration as the example of a convenient
configuration system. However, UCL is fully compatible with JSON format and is
able to parse json files.
UCL is used by pkg(8) for its configuration file as well for the manifest format
in packages, it will be used in base for the pkg boostrap (signature checking
and configuration file parsing.)
libucl has been developped and is maintained by vsevolod@
giving access to functionality that is not available in capability mode
sandbox. The functionality can be precisely restricted.
Start with the following services:
- system.dns - provides API compatible to:
- gethostbyname(3),
- gethostbyname2(3),
- gethostbyaddr(3),
- getaddrinfo(3),
- getnameinfo(3),
- system.grp - provides getgrent(3)-compatible API,
- system.pwd - provides getpwent(3)-compatible API,
- system.random - allows to obtain entropy from /dev/random,
- system.sysctl - provides sysctlbyname(3-compatible API.
Sponsored by: The FreeBSD Foundation
by hastctl(8), hastd(8) and auditdistd(8) and will soon be also used
by casperd(8) and its services. There is no documentation and pjdlog.h
header file is not installed in /usr/include/ to keep it private.
Unfortunately we don't have /lib/private/ at this point, only
/usr/lib/private/, so the library is installed in /lib/.
Sponsored by: The FreeBSD Foundation
