and the variable doesn't even exist (though it is referenced elsewhere).
Just make sure it produces error messages when Mike get back to it.
PR: kern/9934
Submitted by: Adrian Filipi-Martin
Change include() so it will be able to load files with forth code,
instead of just builtins. Remove #@- from the include section of the
help file, since they don't work in the new version of include, unless
BOOT_FORTH is not defined.
Change bf_run() so it will return the result returned by ficlExec(). Also,
make bf_run() push "interpret" to be executed by ficlExec(), since ficlExec()
doesn't do it by itself. (Things worked previously because nothing
recursed through ficlExec() by the way of bf_run()).
Change/extend comments on builtin behavior.
Search for "interpret" at the end of bf_init(), so /boot/boot.4th can
provide it's own version.
Remove dead code.
the interrupt which will be given to the PCIC. If the value supplied is
illegal or not available, interrupts will be turned off and polled mode
used instead.
bootinfo structure where bi_esymtab < bi_symtab was being passed
to the kernel. In the case of older 2.x kernels, this was causing
garbage to be printed to the video console, followed by an exception.
This should resolve a problem reported on -current by Peter Jeremy
<peter.jeremy@auss2.alcatel.com.au>.
help.common
interp.c
Rename the 'source' command to 'include' in order to avoid conflict
with the ANS Forth command of the same name. (kern/9473)
interp_forth.c:
Changes from kern/9412 (EXCEPTION word), kern/9442 (TIB buffer
sizing) and an improved version of kern/9460 (set
version numbers).
load_aout.c:
Trim some obsolete #if 0'ed cruft.
pnp.c:
Tidy the pnpscan output, turn off the module scanning until we
sort out how to do it right.
PR: kern/9412 kern/9442 kern/9460 kern/9473
Submitted by: PRs from Daniel Sobral <dcs@newsguy.com>
needs. This removes the dependancy on Perl for the generation of the
loader, allowing the world to be built on a perl-free system.
Submitted by: Joe Abley <jabley@clear.co.nz>
problems in case a wrong option was given previously, and no option
is given to the next command.
PR: kern/9371
Submitted by: "Daniel C. Sobral" <dcs@newsguy.com>
the first time block 0 is read. This fix initialises the block
numbers to -1 which isn't the most correct thing for a daddr_t but
it isn't likely to cause a problem in the boot blocks and it could
do with a more thought out fix later.
The bug is probably benign on the i386 but on the alpha it can
cause initial file opens to fail. This is the cause of the "can't
open /boot/boot.conf" errors.
It appears on the alpha because of a number of combining factors.
On the alpha the LABELSECTOR is 0 so block 0 needs to be read in
from the media. The first time this happens you get a false hit
because the bc_blkno field is zero initially. Also, the timestamp
check against this cache hit succeeds because on the alpha a hacked
getsecs() function can return 0 when it starts counting so that
the zero initial timestamp + BCACHE_TIMEOUT is greater than the
current time until getsecs() has counted passed BCACHE_TIMEOUT.
The overall effect is that the first open() that occurs gets a
false cache hit and returns garbage to the bd_strategy() function
which then fails the open() call. This false hit then stays in the
cache until BCACHE_TIMEOUT getsecs() ticks have passed; all open()
calls during this time fail.
This explains why you can generally access the media by the time
you get to interp() and start issuing commands but the earlier
attempts to run the boot scripts are failing.
It's possible that this is causing the problem switching to the
mfsroot floppy as well but I haven't confirmed that.
o Add fexists word to check for the presence of a file
o make fexists and fload immediate words which DTRT both interpreted
and compiled (doh!)
o add an init word which gets run at bootstrapping time to do extra
post-coldload initialization (in the default implementation, we
look for /boot/boot.4th and load it if found).
to the Forth interpreter. Instantiate all of our inbuilt commands
as Forth words, and handle them being called from there.
Add my copyright to the bcache module (oops).
and will bypass transfers for more than 8k. Blocks are invalidated after
2 seconds, so removable media should not confuse the cache.
The 8k threshold is a compromise; all UFS transfers performed by
libstand are 8k or less, so large file reads thrash the cache.
However many filesystem metadata operations are also performed using
8k blocks, so using a lower threshold gives poor performance.
Those of you with an eye for cache algorithms are welcome to tell me
how badly this one sucks; you can start with the 'bcachestats' command
which will print the contents of the cache and access statistics.
* Embed the stack into the bss section for loader and netboot. This
is required for netboot since otherwise the stack would be inside our
heap.
* Install loader and netboot in /boot by default.
* Fix getbootfile so that it searches for a ',' instead of a ';'
when terminating the filename.
filesystems.
- New 'help' command and data in the help.* files (not yet installed),
provides topic and subtopic help, indexes, etc.
- Don't crash if the user tries to set an invalid console. Be helpful
instead.
- Expand tabs (badly) on the i386 video console.
- Some minor cosmetic changes.
can fit into my test machine.
- Move to using STAILQs rather than ad-hoc singly-linked lists.
- Use a mostly procedural interface to the PnP information. This
improves data-hiding.
Implement a new linker-set technique (currently on i386 only but should work
on Alpha as well). This is a good candidate for replacing the current
gensetdefs cruft completely.
can seek back to the first PT_LOAD and doing a close/reopen if it cannot.
This is because the first PT_LOAD section includes the ELF headers.
This fixes gzipped kernels on the i386, it should solve mike's problem
for the Alpha.
