In addition to Clang 3.3, it turns out that GCC 4.7 in Ports also does
not support the _Thread_local keyword. Let's document this in a bit more
detail.
Reported by: antoine@
Prior to the change it would always return initproc for non-traced processes.
This fixes ps apparently always returning 1 as ppid.
Pointy hat: mjg
Reported by: many
MFC after: 1 week
friendliness. This should restore old-fashioned kernel building in a
cross environment, though this has only had limited testing.
Sponsored by: Netflix
This allows WITH_DEBUG_FILES to produce standalone debug for the ELF
runtime linker.
We previously disabled standalone debug files for bsd.prog.mk consumers
that included a non-default ${PROG} target, but this is not required.
Consumers that do not support standalone debug are still handled by
disabling it for statically linked binaries, and for those that specify
a non-default binary format.
Sponsored by: DARPA, AFRL
This happen when converting any JBOD to RAID or creating
any new RAID from Unconfigured Drives.
Without this fix, user may see below call trace if WITNESS is enabled.
witness_warn() at witness_warn+0x4b5/frame 0xfffffe011f929a00
uma_zalloc_arg() at uma_zalloc_arg+0x3b/frame 0xfffffe011f929a70
malloc() at malloc+0x192/frame 0xfffffe011f929ac0
mrsas_bus_scan_sim() at mrsas_bus_scan_sim+0x32/frame 0xfffffe011f929af0
mrsas_aen_handler() at mrsas_aen_handler+0x11c/frame 0xfffffe011f929b20
taskqueue_run_locked() at taskqueue_run_locked+0xf0/frame 0xfffffe011f929b80
taskqueue_thread_loop() at taskqueue_thread_loop+0x9b/frame 0xfffffe011f929bb0
fork_exit() at fork_exit+0x84/frame 0xfffffe011f929bf0
fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe011f929bf0
Submitted by: kadesai
Reviewed by: ambrisko
MFC after: 3 days
- Remove c++0x hack from <sys/cdefs.h> that was needed when Clang did
not fully implement C++11. We can now safely test against C++11 to
check whether thread_local is available, like we do for all other
C++11 keywords.
- Don't use __clang__ to test for thread safety annotation presence. It
turns out we have a proper attribute for this.
in the clocks=<...> properties of their FDT data. The clock properties
consist of 2-cell tuples, each containing a clock device node reference and
a clock number. A clock device driver can register itself as providing
this interface, then other drivers can turn the FDT clock node reference
into the corresponding device_t so that they can use the interface to query
and manipulate their clocks.
This provides convenience functions to enable or disable all the clocks
listed in the properties for a device, so most drivers will be able to
manage their clocks with a single call to fdt_clock_enable_all(dev).
used prior to f_dialog_init() -- e.g., in a script that sets
DIALOG_SELF_INITIALIZE to NULL, preventing f_dialog_init() from being run
automaticaly when `dialog.subr' is included. Caused by sub-shell processing
of arguments inheriting prior value of $OPTIND, used by getopts. Solved by
unsetting OPTIND prior to [re-]processing of positional arguments.
xref handle, and for registering that association. Also use the same data
for faster translations between node and xref handles.
Now when fdt properties contain &othernode references, a driver can find
the device instance that corresponds to &othernode, and thus can use
interfaces provided by that instance.
Reviewed by: nwhitehorn
bsearch_b is the Apple blocks enabled version of bsearch(3).
This was added to libc in Revision 264042 but the commit
missed the declaration required to make use of it.
While here move some other block-related functions to the
BSD_VISIBLE block as these are non-standard.
Phabric: D638
Reviewed by: theraven, wollman
While there, add a NO_WTHREAD_SAFETY flag that can be used to disable
this specific warning flag. Disable it for auditdistd. We can easily
patch up auditdistd to have the right annotations to build, but as
auditdistd is intended to be portable across other operating systems,
it's not worth the effort.
Approved by: brueffer@
- Add annotations to the lock/unlock function to indicate that the
function is allowed to lock and unlock the underlying pthread mutex.
- Add __guarded_by() annotations to the global variables.
Approved by: hselasky@
inf and raises the divided-by-zero exception. Compilers
constant fold one/zero to inf but do not raise the exception.
Introduce a volatile vzero to prevent the constant folding.
Move the declaration of zero into the main declaration block.
While here, fix a nearby disordering of 'lx,ix'
Discussed with: bde
This change extends all of the functions present in the <pthread.h> and
<threads.h> headers to have lock annotations. This will allow Clang to
warn about the following:
- Locking a function twice,
- Unlocking a function without a mutex being locked,
- Forgetting to unlock a mutex before returning,
- Destroying or reinitializing a mutex that is currenty locked,
- Using an unlocked mutex in combination with a condition variable.
Enabling these annotations already allowed me to catch a bug in one of
our userspace tools (r270749).
Clang has support for annotating mutexes and code that uses mutexes to
validate certain aspects of thread safety:
- Whether acquiring/releasing locks is done properly (e.g., whether you
unlock a mutex before leaving a function).
- Whether a lock is held while reading/writing data from/to memory.
Analysis is performed at the function level. Functions can be annotated
to indicate they:
- (try to) pick up a lock,
- release a lock,
- can only be called when (not) holding a lock,
- assert that a lock is held.
Variables and structure members can be annotated to indicate that they
are guarded by a certain lock. In C++, these annotations can refer
to both global variables, but also other class/structure members. In C,
it is only possible to refer to global variables.
This change adds wrappers for the annotations used by Clang to
<sys/cdefs.h>. They currently have no effect, but this is on purpose.
This change will be merged back to FreeBSD 9 and 10, which means we can
safely experiment with these annotations on HEAD without making it
harder to port changes back.
Reviewed by: announced on arch@ and toolchain@
MFC after: 3 weeks
- Identify the console driver used and print syscons or vt as appropriate.
- If vt is used and a keymap could not be loaded, then try to replace the
keymap name configured in rc.conf based on a replacement list in this
script. Warn about the fact, that a syscons keyname is configured and
report the replacement used under vt.
- If no replacement keymap is found, no keymap is loaded and a warning
is displayed, which points at the conversion script and allows the
conversion of keymaps not part of the official distribution.
This patch has been sent to the -hackers list for review, but no comment
has been received, yet. It is tested to work under syscons and vt on my
system (on vt with either the syscons or vt keymap file name in rc.conf).
MFC after: 3 days
Remove parentheses in a return statement to be consistent with the
rest of the file.
Rename sin_pi() in the float version to sin_pif().
Remove large comment that precedes sin_pif(). The comment
duplicates a comment in e_lgamma_r.c where the algorithm
is documented.
Requested by: bde
packets at all. Swapping byte order on SOCK_RAW was actually a bug, an
artifact from the BSD network stack, that used to convert a packet to
native byte order once it is received by kernel.
Other operating systems didn't follow this, and later other BSD
descendants fixed this, leaving us alone with the bug. Now it is
clear that we should fix the bug.
In collaboration with: Olivier Cochard-Labbé <olivier cochard.me>
See also: https://wiki.freebsd.org/SOCK_RAW
Sponsored by: Nginx, Inc.
sin_pi(x) is only called for x < 0 and |x| < 2**(p-1) where p is
the precision of x. The new argument reduction is an optimization
compared to the old code, and it removes a chunk of dead code.
Accuracy tests in the intervals (-21,-20), (-20,-19), ... (-1,0)
show no differences between the old and new code.
Obtained from: bde
- Static'ize sdhci_debug local to sdhci.c.
- Const'ify PCI device description strings.
- Nuke redundant resource ID members from sdhci_pci_softc.
- Nuke unused hw.sdhci_pci.debug tunable.
- Add support for using MSI instead of INTx, controllable via the tunable
hw.sdhci.enable_msi (defaulting to on) and tested with a RICOH R5CE823 SD
controller.
- Use NULL instead of 0 for pointers.
MFC after: 3 days
The EABI unwind info requires a .fnend for every .fnstart, and newer
binutils will complain about seeing two .fnstart in a row. This change
allows newer tools to compile our code.
Reported by: bapt
Reviewed by: imp
and keep both converted to drvapi and non-converted drivers
compilable.
o Make if_t typedef to struct ifnet *.
o Remove shim functions.
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
