Commit Graph

99 Commits

Author SHA1 Message Date
Brian Somers
0ca6f91b84 When going from DATALINK_HANGUP directly to
DATALINK_OPENING, don't forget to change phase
to ESTABLISH if we're currently TERMINATE'ing.
Helped locate by: Chuck Robey <chuckr@mat.net>
1999-04-06 14:48:10 +00:00
Brian Somers
5945a079eb When we get an LCP TLU, go into PHASE_AUTHENTICATE
from any other phase besides PHASE_NETWORK, otherwise
there's a chance that we end up sending auth packets
and dropping the replies.
1999-04-05 21:52:10 +00:00
Brian Somers
c11e57a340 Extend the ``set redial'' command to allow incremental
redial timeouts.
1999-03-04 17:42:15 +00:00
Brian Somers
479508cf28 Allow control over the number of ConfigREQ & TermREQ attempts
that are made in each of the FSMs (LCP, CCP & IPCP) and the
number of REQs/Challenges for PAP/CHAP by accepting more arguments
in the ``set {c,ip,l}cpretry'' and ``set {ch,p}apretry'' commands.

Change the non-convergence thresholds to 3 times the number of configured
REQ tries (rather than the previous fixed ``10'').  We now notice
repeated NAKs and REJs rather than just REQs.

Don't suggest that CHAP 0x05 isn't supported when it's not configured.

Fix some bugs that expose themselves with smaller numbers of retries:
o Handle instantaneous disconnects (set device /dev/null) correctly
  by stopping all fsm timers in fsm2initial.
o Don't forget to uu_unlock() devices that are files but are not
  ttys (set device /dev/zero).

Fix a *HORRENDOUS* bug in RFC1661 (already fixed for an Open event in state
``Closed''):
  According to the state transition table, a RCR+ or RCR- received in
  the ``Stopped'' state are supposed to InitRestartCounter, SendConfigReq
  and SendConfig{Ack,Nak}.  However, in ``Stopped'', we haven't yet
  done a TLS (or the last thing we did is a TLF).  We must therefore
  do the TLS at this point !

  This was never noticed before because LCP and CCP used not use
  LayerStart() for anything interesting, and IPCP tends to go into
  Stopped then get a Down because of an LCP RTR rather than getting a
  RCR again.
1999-02-26 21:28:14 +00:00
Brian Somers
b5c347a37a When our dial timeout is ``random'', display its value
correctly by invoking the timer to get the value before
displaying the message.
Don't assume that a value of 0 is ``random'' in
``show datalink''.
Make the random value between 1 and DIAL_TIMEOUT rather
than between 0 and DIAL_TIMEOUT-1
1999-02-25 12:00:04 +00:00
Brian Somers
5e31549897 Fully support both NT and LANMan CHAP type 0x80 as both
authenticator and authenticatee.
1999-02-18 00:52:15 +00:00
Brian Somers
64cfdfc6fb Nuke any remaining auth timers when datalinks come back down
to DATALINK_LCP.
1999-02-17 02:11:28 +00:00
Brian Somers
58330d7bfa When resending chap challenges, resend the same challenge
each time rather than making up a new one.

Increase the authname/authkey max sizes to 100 characters.

Allow ``authkey'' specifications beginning with ``!''.
When a challenge is received, the text following the
``!'' is executed as a program (expanding stuff in the same
way that ``sh'' and ``!bg'' do).  The program is passed the
peer name, peer challenge and local ``authname'' on standard
input and is expected to output the name/key combination that
should be used to build the CHAP response.

This provides support for Secure ID cards (guess what I was
given at work recently!) using CHAP.

Examples will follow.
1999-02-11 10:14:08 +00:00
Brian Somers
f0cdd9c021 Decouple pap & chap output routines from the corresponding
input routines and take advantage of the new init/continue
interface in libradius.  This allows a timely response on
other links in an MP setup while RADIUS requests are in
progress as well as the ability to handle other data from
the peer in parallel.  It should also make the future addition
of PAM support trivial.

While I'm in there, validate pap & chap header IDs if
``idcheck'' is enabled (the default) for other FSM packet
types.

NOTE: This involved integrating the generation of chap
      challenges and the validation of chap responses
      (and commenting what's going on in those routines).
      I currently have no way of testing ppps ability
      to respond to M$Chap CHALLENGEs correctly, so if
      someone could do the honours, it'd be much
      appreciated (it *looks* ok!).

Sponsored by: Internet Business Solutions Ltd., Switzerland
1999-02-06 02:54:47 +00:00
Brian Somers
aceaed9283 Reimplement the previous fix (no response to PAP requests)
at the authentication layer rather than at the PAP layer
so that it also applies to CHAP (no response to CHAP
challenges).
1999-02-02 09:35:17 +00:00
Brian Somers
8db502bbfd If we receive no answer from the server when sending PAP
requests, give up (don't sit there indefinitely).
1999-02-01 13:42:25 +00:00
Brian Somers
972a1bcf5d Initial RADIUS support (using libradius). See the man page for
details.  Compiling with -DNORADIUS (the default for `release')
removes support.

TODO: The functionality in libradius::rad_send_request() needs
      to be supplied as a set of routines so that ppp doesn't
      have to wait indefinitely for the radius server(s).  Instead,
      we need to get a descriptor back, select() on the descriptor,
      and ask libradius to service it when necessary.
      For now, ppp blocks SIGALRM while in rad_send_request(), so
      it misses PAP/CHAP retries & timeouts if they occur.

      Only PAP is functional.  When CHAP is attempted, libradius
      complains that no User-Password has been specified... rfc2138
      says that it *mustn't* be used for CHAP :-(

Sponsored by: Internet Business Solutions Ltd., Switzerland
1999-01-28 01:56:34 +00:00
Brian Somers
b51a60cc47 Recurse when we've switched state via LoginDone(). If we've
got an open link, we want it to be select()d on - otherwise
we get a freeze when ``openmode'' is passive.
1999-01-20 18:06:52 +00:00
Brian Somers
5165af6fa8 If we've configured CBCP *and* another not-so-important
CALLBACK protocol and end up agreeing CBCP, DTRT and go
into CBCP phase rather than mistakenly terminating as
if CBCP wasn't agreed.
Problem reported by: Alexander Dubinin <alex@nstl.nnov.ru>
1999-01-12 21:50:20 +00:00
Brian Somers
47dd77c14d Don't use the next phone number after the ``|'' if the
dial & login are successful.
Submitted by:   Toshiomi Moriki <Toshiomi.Moriki@ma1.seikyou.ne.jp>
PR:             9382
1999-01-08 09:04:58 +00:00
Brian Somers
8b09cf1cc7 Fix a rather bad latency problem (uncovered by the recent timer commit).
Problem reported by: Christopher Hall <hsw@acm.org>
1998-12-15 19:12:24 +00:00
Brian Somers
f1e8dfb20c Boy, this was tricky to find:
Remove any dial timer that might be hanging around at
  datalink_Destroy() time.  This timer may be left running
  after the link is closed (making sure it's not automatically
  opened again too soon).
1998-12-10 18:36:53 +00:00
Brian Somers
cf784a89b7 Explain what the ``*'' means for a CBCP phone number
in ``show link''.
1998-10-17 12:28:06 +00:00
Brian Somers
b6f5f44231 Destroy any existing chat timeouts in datalink_ComeDown()
If we're told to close/down while in DIAL or LOGIN state,
we don't want to keep our timeout running :-/
1998-08-18 00:53:48 +00:00
Brian Somers
bf1d3ff614 When entering ``term'' mode, don't output any messages until
the device is successfully opened.  If we fail to open it,
mention the fact.
Also go back into command mode as soon as the device is closed
rather than waiting for the user to type something before noticing.
1998-08-09 15:34:11 +00:00
Brian Somers
92b0955883 o Support callback types NONE, E.164, AUTH and CBCP.
(see the new ``set callback'' and ``set cbcp'' commands)
o Add a ``cbcp'' log level and mbuf type.
o Don't dump core when \T is given in ``set login'' or
  ``set hangup''.
o Allow ``*'' and blanks as placeholders in ppp.secret and
  allow a fifth field for specifying auth/cbcp dialback
  parameters.
o Remove a few extraneous #includes
o Define the default number of REQs (restart counter) in defs.h
  rather than hardcoding ``5'' all over the place.
o Fix a few man page inconsistencies.
1998-08-07 18:42:51 +00:00
Brian Somers
d4af231c81 Only start checking carrier when the datalink state machine
exceeds DATALINK_READY.  When we go back to READY or less
(eg. ``close lcp''), switch the carrier-checking-timer off again.

This fixes the callback example in ppp.conf.sample.
Noted as broken by: Damian Kuczynski <damian@best.pw.edu.pl>
1998-07-03 17:24:38 +00:00
Brian Somers
06337856e1 The CCP layer now behaves as follows:
o If we've denied and disabled all compression protocols, stay
  in ST_INITIAL and do an LCP protocol reject if we receive any
  CCP packets.
o If we've disabled all compression protocols, go to ST_STOPPED
  and wait for the other side to ask for something.
o If we've got anything enabled, start REQing as soon as the auth
  layer is up.
o If we're in multilink mode, than the link level CCP goes
  straight to ST_STOPPED irrespective of what's configured so that
  we never try to compress compressed stuff by default.
1998-06-30 23:04:17 +00:00
Brian Somers
10a9be1e88 Remove redundant includes 1998-06-27 14:18:15 +00:00
Brian Somers
897f9429f9 Add `ipcp'' as an optional argument to `open'', and make
open capable of re-negotiatiating the various layers.

It is now possible to change various link options and then
re-open the relevant layer, making the changes effective -
for example, switching off VJ compression or starting ECHO
LQRs on-the-fly.
1998-06-25 22:33:31 +00:00
Brian Somers
1af29a6e96 o If we come out of select() with only write descriptors that
end up writing zero bytes, sleep for 1/10 of a second so that
  we don't end up using up too much cpu.
  This should only ever happen on systems that wrongly report a
  descriptor as writable despite the tty buffer being full.
  Discussed with: Jeff Evarts

o Do an initial run-time check to see if select() alters the passed
  timeval.  This knowledge isn't yet used, but will be soon.
1998-06-24 19:33:36 +00:00
Brian Somers
09206a6f2a Create & use fsm2initial(), a function to bring a
state machine back to ST_INITIAL without going
through any unnecessary TLS/TLF pairs.
1998-06-20 00:19:42 +00:00
Brian Somers
7729a18215 Only set the datalink::stayonline flag if we
close/down with CLOSE_LCP when our state is
DATALINK_READY or higher.
1998-06-16 07:15:16 +00:00
Brian Somers
9c81b87d1e Make `close lcp' just close the LCP layer and not hangup. This is
useful for slirp users that wish to get their shell back after the
ppp session.  `close' with no args still hangs up as expected.
Required by: jmz
1998-06-15 19:05:27 +00:00
Brian Somers
ff0f9439b4 o Maintain a link-type mask for open datalinks as well as
for all datalinks in a bundle.  Ppp now deals correctly
  with link types that are changed while open
o When changing the type of the last AUTO link, only clear
  the interface if we're not in PHASE_NETWORK.  This allows
  us to switch to -ddial mode while we have a connection
  without suddenly unexpectedly throttling ourselves by
  clearing the interface configuration.
  Problem area noted by: Aaron Jeremias Luz <aaron@csh.rit.edu>
1998-06-12 17:45:10 +00:00
Brian Somers
81358fa3fc o Make modes consistent throughout ppp. The same strings are used
in `set mode', `allow modes', on the command line and when
  outputting mode names.  The strings are matched so that only
  enough characters to uniquely identify the string are required,
  so you can now

    ppp -a mylabel  (for auto mode)
    ppp -b mylabel  (for background mode)
    ppp -dd mylabel (for direct dial mode)

  etc.
o Make -ddial dial when specified on the command line (oops).
  Pointed out by: Alex <garbanzo@hooked.net>
1998-05-29 18:32:11 +00:00
Brian Somers
85fd273a31 o Don't forget to close our transfer socket if we cannot
generate the data to transfer.
o Transfer uucp lock ownership for the transferred device.
o Don't assume we know the correct values of dev_is_modem and
  mbits after the transfer.
1998-05-28 23:15:40 +00:00
Brian Somers
54cd8e13c6 o Don't try to transfer tty device descriptors as there's no way of
transferring session rights with them.  Instead, create two
  `/bin/cat' processes.  A new child is spawned and disassociated from
  the terminal and the parent, which continues with the rest of the ppp
  process.  Meanwhile, the parent spawns another child, and both the
  parent and child exec the `/bin/cat' commands with the appropriate
  descriptors.  This way, the session is owned by the parent, and the
  tty is held open.
o Close LCPs that have done a TLF and are now in ST_STOPPED before
  calling Down.  This prevents them from trying to come back up again
  after the peer has shut them down (it seems a bit strange that the
  rfc says that a Down in ST_STOPPED will cause a TLS etc).
o Don't try to set the physical link name pointer when we're receiving
  and renaming a datalink.  The physical hasn't been created yet, and as
  it happens, the garbage physical pointer happens to be the value of another
  physical - so we're pointing that other physical name at ourselves.
  yeuck.
o Re-arrange the order of things in main (DoLoop()).  We now handle
  signals only after the select and not before the UpdateSet.  It's
  possible that either a signal (FSM timeout) or a descriptor_Read()
  brings a link down, after which we'd better tidy up any dead direct
  and 1off descriptors before calling UpdateSet() again.
o Mention when we detect a PPP packet when we see one before the link
  is up (then start LCP as before).
1998-05-25 02:22:38 +00:00
Brian Somers
0f2f3eb395 o Move our prompt descriptor list outside of the bundle.
It's now dealt with by the `server' object.  This simplifies
  things as we only have one list of prompt descriptors and
  the log_ routines check prompt::logactive to determine
  whether it should be used for output.
o Include the MP socket UpdateSet() result in bundle::UpdateSet().
o Don't select on the tun device unless we're in NETWORK
  phase or AUTO mode.
o Stop the idle timer when we go to DEAD phase.  We may
  have transferred a link and not had a chance to kill
  it.
o Don't fail when trying to unlink our transferred datalink
  from our descriptor lists just before the transfer.
o Add our link descriptor to the write set if we got a short
  write the last time (physical::out is set).
o Log the connection source address when a connection is closed.
o Remove descriptor::next field.  Descriptor lists are not required
  any more.
1998-05-23 22:24:50 +00:00
Brian Somers
1df0a3b93b o If all CCPs are disabled & denied, don't send a REQ - just enter
STOPPED state waiting for the peer to say something.
1998-05-23 13:38:09 +00:00
Brian Somers
d91d286164 MFMP: Make ppp multilink capable.
See the file README.changes, and re-read the man page.
1998-05-21 21:49:08 +00:00
Brian Somers
58d5533465 Add the `rename' command for renaming links. 1998-05-16 23:47:28 +00:00
Brian Somers
dd0645c5b7 o Add the `set mode' command for change a links current mode. It
is not possible to switch to or from dedicated or direct mode,
  but all other combinations are ok (eg. -auto -> -ddial).
o Cope with the fact that commands with optional context may not
  be able to obtain a link with command_ChooseLink() (if all links
  have been deleted for example).
o Allow `clone'ing in non-multilink mode.  We may for example want
  to configure two links in unilink mode and dial them both, using
  the one that comes up first.  It's also possible to rename
  ``deflink'' by cloning it, deleting the original, then setting
  the mode of the new link.
1998-05-15 23:58:30 +00:00
Brian Somers
ea7229694b o Call bundle_LinkClosed() when transferring a datalink so that
the bundle has the opportunity to go PHASE_DEAD and cleanup
  the interface (if it's the last link).
o Regnerate our phys_type value when we transfer the link.
o Always clean up the interface when destroying our bundle in case
  we're abending.
o Always clean up our interface when the last link is gone rather than
  delaying things 'till exit time in the -direct case (the interface
  is useless anyway).  Do this *after* slamming down our NCPs (if
  they're still around).
o Our MP server descriptor now clears the relevent device descriptor
  from our descriptor [fd]sets when a datalink is on death-row (to
  be transferred to another running ppp), thus avoiding the possibility
  of passing a bum descriptor to select() and having ppp abend.
o Handle the MP socket descriptor functions from within the bundle
  descriptor functions.  Now we ensure that the MP socket descriptor
  functions see the descriptor sets *after* they've been seen by our
  datalinks.
o Add/fix a few more comments.
1998-05-15 18:21:45 +00:00
Brian Somers
0a1b5c9d9e o Activate link-level CCPs in multilink mode, by bringing them
into the ST_STOPPED state.
o Allow an optional ccp|lcp argument to `down'.  The default is
  still lcp (as before).  You can now call down with no context
  in multilink mode, in which case it'll down the multilink ccp
  or the entire bundle (*very* rude).
o Allow an optional `!' after `close ccp' (close ccp!) to tell
  ccp to stay in the CLOSED state after the terminate ACK.  The
  default is now to re-enter STOPPED so that the peer can bring
  the layer back up if desired.
o Always handle proto-compressed packets, even if we've agreed
  (in LCP) that the peer will not send us 1 byte protocols.
  If the peer violates the LCP agreement, log it to the HDLC
  log.
o Fix some comments.
1998-05-15 18:21:12 +00:00
Brian Somers
66f634b6df o Do an mp_Down() when aborting ppp.
o Re-assign the link name when strdup()ing the datalink name.
o Add the link name to some more hdlc log messages.
1998-05-11 23:39:30 +00:00
Brian Somers
9ae588829e Log datalink state transitions consistently. 1998-05-09 13:52:12 +00:00
Brian Somers
b7c5748e5e o Rename datalinks as soon as the name has been received so that
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink.  Leave
  it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
  in select().
o Remove the evil nointr_[u]sleep() functions.  Timers should be
  (and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
  on which the read() is done.  We should never read() 0 after
  select() says there's something there - not unless the link
  has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
  `term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
  timers.
o Only send data links that have *no* pending output data.  This
  means that our final ACK will be written rather than being
  nuked with the datalink transmission.
1998-05-08 01:15:19 +00:00
Brian Somers
84917b87ba Log link name changes correctly. 1998-05-06 23:49:33 +00:00
Brian Somers
078c562e54 o Don't enter phase TERMINATE in the LCP TLD, leave it exclusively
for the last NCP TLF.
o Move tun reading from the main loop into the bundle descriptor
  handling routines.
o Cosmetic: Add a few `const's and make some diagnostics clearer.
1998-05-06 18:49:45 +00:00
Brian Somers
96c9bb21aa o Transfer file descriptors using {send,recv}msg & SCM_RIGHTS,
using the scatter/gather array to transfer the link
  information.  The whole link is now passed in one message.

This is far better than the two `/bin/cat' processes per additional
link :-)  I remember years ago thinking that file descriptor
transferral would be a really amazing facility !

Suggested by: Garrett Wollman <wollman@khavrinen.lcs.mit.edu>
         and: Eivind Eklund <eivind@yes.no>
1998-05-02 21:57:50 +00:00
Brian Somers
dd7e261079 Cosmetic: Make our external function names consistent. 1998-05-01 19:26:12 +00:00
Brian Somers
47723d29e5 o Use two `cat' processes to connect the modem to an
already-running ppp.
  Suggested by: Garrett Wollman <wollman@khavrinen.lcs.mit.edu>
o Use _PATH_DEVNULL rather than "/dev/null"
o Be more paranoid about nuking running timers when
  transferring links.
1998-05-01 19:20:09 +00:00
Brian Somers
6f38457323 o Create a new `timer'' log level. This lets us `set
log debug'' without filling our filesystem/screen with
  junk that we don't really want to see.
o change PHYS_STDIN to PHYS_DIRECT - we can handle incoming
  connections that aren't on STDIN_FILENO now.
o Allow return values from our FSM LayerUp functions.  If
  LayerUp() fails, the FSM does an immediate FsmDown() without
  calling the fsm_parent's Layer{Up,Down} functions.
o Clear the close-on-exec flag of file descriptor 3 when executing
  chat programs so that our documented ability to communicate with
  /dev/tty via that descriptor works.  Also document it as
  descriptor 3, not 4 :-O
o Allow a ``rm'' command as an alias for ``remove''.
o Fix the bind()/connect()/accept() calls made by the MP server.
o Create bundle_SendDatalink() and bundle_ReceiveDatalink().
  This allows `struct datalink's to flatten themselves, pass
  through a pipe (read: the eye of a needle !) and come alive
  at the other end.  The donator then fork()s & exec()s pppmpipe,
  ``passing'' the connection to another ppp instance.

   *** PPP NOW TALKS MULTILINK :-))) ***

Our link utilization is hideous, and lots of code needs
tidying still.  It's also probably riddled with bugs !
It's been tested against itself only, and has hung once,
so confidence isn't high....
1998-04-30 23:53:56 +00:00
Brian Somers
9c281ab21b Don't forget to set up our ppp.secret IP numbers & label
in non-MP mode.
1998-04-30 23:52:53 +00:00