None of existing STEC devices need UNMAP or even support it well, having
many limitations and even hanging sometimes executing those commands.
New devices that may use UNMAP going to be released under HGST name.
MFC after: 3 days
kern.cam.ctl.iscsi.ping_timeout to 0. This fixes interoperability with
some initiators that don't properly support NOP-Ins, namely iPXE/gPXE.
Submitted by: Chen Wen <pokkys@gmail.com>
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
At this moment it works only for files and ZVOLs in device mode since BIOs
have no respective respective cache control flags (DPO/FUA).
MFC after: 1 month
Sponsored by: iXsystems, Inc.
that's ATAPI specific. Instead, skip to PROBE_SET_MULTI instead for
non ATAPI protocols. The prior code incorrectly terminated the probe
with a break, rather than arranging for probedone to get called. This
caused panics or worse on some systems.
that's only mostly similar. Specifically word 78 bits are defined for
IDENTIFY DEVICE as
5 Supports Hardware Feature Control
while a IDENTIFY PACKET DEVICE defines them as
5 Asynchronous notification supported
Therefore, only pay attention to bit 5 when we're talking to ATAPI
devices (we don't use the hardware feature control at this time).
Ignore it for ATA devices. Remove kludge that papered over this issue
for Samsung SATA SSDs, since Micron drives also have the bit set and
the error was caused by this bad interpretation of the spec (which is
quite easy to do, since bits aren't normally overlapping like this).
sizeof(struct scsi_inquiry_data) of 256 bytes combined with off-by-one
error in the changed code gave total INQUIRY data length above 255 bytes,
that was maximal INQUIRY length in SPC-2. While SPC-3 increased the
maximal length to 64K, at least sg3_utils are still confused by that.
MFC after: 1 week
This allows to avoid extra network traffic when copying files on NTFS iSCSI
disks within one storage host by drag'n'dropping them in Windows Explorer
of Windows 8/2012. It should also accelerate Hyper-V VM operations, etc.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
left some of the decisions based on its counterpart, SA_CCB_BUFFER_IO
being random. As a result, propagation of the residual information
for the SPACE command was broken, so the number of filemarks
encountered during a SPACE operation was miscalculated. Consequently,
systems relying on properly tracked filemark counters (like Bacula)
fell apart.
The change also removes a switch/case in sadone() which r256843
degraded to a single remaining case label.
PR: 192285
Approved by: ken
MFC after: 2 weeks
Unlike disk devices ZVOLs process all requests synchronously. That makes
impossible sending multiple requests to them from single thread. From the
other side ZVOLs have real d_read/d_write methods, which unlike d_strategy
can handle uio scatter/gather and have no strict I/O size limitations.
So, if ZVOL in "dev" mode is detected, use of d_read/d_write methods instead
of d_strategy allows to avoid pointless splitting of large requests into
MAXPHYS (128K) sized chunks.
MFC after: 1 week
link_elf_obj: symbol icl_pdu_new_bhs undefined
PR: 192031
Submitted by: Nils Beyer (earlier version)
MFC after: 3 days
Sponsored by: FreeBSD Foundation
After I gave each iSCSI target its own port, the old limit appeared to be
not so big. This change almost proportionally increases per-LUN memory
use, but it is still three times better then it was before r268807.
MFC after: 2 weeks
CTL never had use for CA support code since SPI has gone, and there is no
even frontends supporting that. But it still was reserving 256 bytes of
memory per LUN per every possible initiator on every possible port.
Wrap unused code with ifdef's in case somebody even need it.
MFC after: 2 weeks
This allows to clone VMs and move them between LUNs inside one storage
host without generating extra network traffic to the initiator and back,
and without being limited by network bandwidth.
LUNs participating in copy operation should have UNIQUE NAA or EUI IDs set.
For LUNs without these IDs VMWare will use traditional copy operations.
Beware: the above LUN IDs explicitly set to values non-unique from the VM
cluster point of view may cause data corruption if wrong LUN is addressed!
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
That should make operation more kind to multi-initiator environment.
Without this, other initiators may find out that something bad happened
to their commands only via command timeout.
Testing shown that both original queued design with separate task queue,
and recent direct execution design had significant flaw: If abort request
arrives just after the victim, the last one may not be in the ooa_queue
yet, and so invisible for the task management function.
Unlike original queued implementation, use same queue for all SCSI and
TASK requests from the same initiator. That avoids races between them:
task functions are always executed in proper time, relatively to other
requests.
